GEGabriel Espineira

Gabriel Espineira

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gabriel Espineira has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Parallel approach of Schrödinger-based quantum corrections for ultrascaled semiconductor devices

    by Gabriel Espiñeira, Antonio J. García-Loureiro, Natalia Seoane

    In the current technology node, purely classical numerical simulators lack the precision needed to obtain valid results. At the same time, the simulation of fully quantum models can be a cumbersome task in certain studies such as device variability analysis, since a single simulation can take up to weeks to compute and hundreds of device configurations need to be analyzed to obtain statistically significative results. A good compromise between fast and accurate results is to add corrections to the classical simulation that are able to reproduce the quantum nature of matter. In this context, we present a new approach of Schrödinger equation-based quantum corrections. We have implemented it using Message Passing Interface in our in-house built semiconductor simulation framework called VENDES, capable of running in distributed systems that allow for more accurate results in a reasonable time frame. Using a 12-nm-gate-length gate-all-around nanowire FET (GAA NW FET) as a benchmark device, the new implementation shows an almost perfect agreement in the output data with less than a 2% difference between the cases using 1 and 16 processes. Also, a reduction of up to 98% in the computational time has been found comparing the sequential and the 16 process simulation. For a reasonably dense mesh of 150k nodes, a variability study of 300 individual simulations can be now performed with VENDES in approximately 2.5 days instead of an estimated sequential execution of 137 days.


  • Open Access

    Parallel Approach of Schr¨Odinger Based Quantum Corrections for Ultrascaled Semiconductor Devices

    by G. Espiñeira, A. J. Garc´ıa-Loureiro, N. Seoane

    In the current technology node, purely classical numerical simulators lack the precision needed to obtain valid results. At the same time, the simulation of fully quantum models can be a cumbersome task in certain studies such as device variability analysis, since a single simulation can take up to weeks to compute and hundreds of device configurations need to be analyzed to obtain statistically significative results. A good compromise between fast and accurate results is to add corrections to the classical simulation that are able to reproduce the quantum nature of matter. In this context, we present a new approach of Schrödinger equation-based quantum corrections. We have implemented it using Message Passing Interface (MPI) in our in-house built semiconductor simulation framework called VENDES, capable of running in distributed systems that allow for more accurate results in a reasonable time frame. Using a 12 nm gate length Gate-AllAround Nanowire FET (GAA NW FET) as an application example, the new implementation shows an almost perfect agreement in the output data with less than a 2% difference between the cases using 1 and 16 processes. Also, a reduction of up to 98% in the computational time has been found comparing the sequential and the 16 process simulation. For a reasonably dense mesh of 150k nodes, a variability study of 300 individual simulations, can be now performed with VENDES in approximately 2.5 days instead of an estimated sequential execution of 137 days.


  • Open Access

    Does the Threshold Voltage Extraction Method Affect Device Variability?

    by Gabriel Espineira, Antonio J. Garcia-Loureiro, Natalia Seoane

    The gate-all-around nanowire FET (GAA NW FET) is one of the most promising architectures for the next generation of transistors as it provides better performance than current mass-produced FinFETs, but it has been proven to be strongly affected by variability. For this reason, it is essential to be able to characterize device performance which is done by extracting the figures of merit (FoM) using data from the IV curve. In this work, we use numerical simulations to evaluate the effect of the threshold voltage (VTH) extraction method on the variability estimation for a gate-all-around nanowire FET. For that, we analyse the impact of four sources of variability: gate edge roughness (GER), line edge roughness (LER), metal grain granularity (MGG) and random discrete dopants (RDD). We have considered five different extraction methods: the second derivative (SD), constant current (CC), linear extrapolation (LE), third derivative (TD) and transconductance-to-current-ratio (TCR). For the ideal non-deformed device at high drain bias, the effect of the extraction technique can lead to a 137 mV difference in VTH and an 89 mV/V difference in the drain-induced-barrier-lowering (DIBL), and when considering GER and LER variability, the influence of the extraction method leads to differences in the standard deviation values of the VTH distribution (σVTH) of up to 2.3 and 3.7 mV respectively, values comparable to intrinsic parameter variations. Therefore, the VTH extraction technique presents itself as an additional parameter that should be included in performance comparisons as it can heavily impact the results.


  • Top Cited Papers
    Open Access

    Benchmarking of FinFET, Nanosheet, and Nanowire FET Architectures for Future Technology Nodes

    by Daniel Nagy, Gabriel Espineira, Guillermo Indalecio, Antonio J. Garcia-Loureiro, Karol Kalna, Natalia Seoane

    Nanosheet (NS) and nanowire (NW) FET architectures scaled to a gate length (LG) of 16 nm and below are benchmarked against equivalent FinFETs. The device performance is predicted using a 3D finite element drift-diffusion/Monte Carlo simulation toolbox with integrated 2D Schrödinger equation based quantum corrections. The NS FET is a viable replacement for the FinFET in high performance (HP) applications when scaled down to LG of 16 nm offering a larger on-current (ION) and slightly better sub-threshold characteristics. Below LG of 16 nm, the NW FET becomes the most promising architecture offering an almost ideal sub-threshold swing, the smallest off-current (IOFF), and the largest ION/IOFF ratio out of the three architectures. However, the NW FET suffers from early ION saturation with the increasing gate bias that can be tackled by minimizing interface roughness and/or by optimisation of a doping profile in the device body.


  • Open Access

    A Multi-Method Simulation Toolbox to Study Performance and Variability of Nanowire FETs

    by Natalia Seoane, Daniel Nagy, Guillermo Indalecio, Gabriel Espiñeira, Karol Kalna, Antonio García-Loureiro

    An in-house-built three-dimensional multi-method semi-classical/classical toolbox has been developed to characterise the performance, scalability, and variability of state-of-the-art semiconductor devices. To demonstrate capabilities of the toolbox, a 10 nm gate length Si gate-all-around field-effect transistor is selected as a benchmark device. The device exhibits an off-current ( I OFF ) of 0.03 μ A/ μ m, and an on-current ( I ON ) of 1770 μ A/ μ m, with the I ON / I OFF ratio 6.63 × 10 4 , a value 27 % larger than that of a 10.7 nm gate length Si FinFET. The device SS is 71 mV/dec, no far from the ideal limit of 60 mV/dec. The threshold voltage standard deviation due to statistical combination of four sources of variability (line- and gate-edge roughness, metal grain granularity, and random dopants) is 55.5 mV, a value noticeably larger than that of the equivalent FinFET (30 mV). Finally, using a fluctuation sensitivity map, we establish which regions of the device are the most sensitive to the line-edge roughness and the metal grain granularity variability effects. The on-current of the device is strongly affected by any line-edge roughness taking place near the source-gate junction or by metal grains localised between the middle of the gate and the proximity of the gate-source junction.


  • Impact of Gate Edge Roughness Variability on FinFET and Gate-All-Around Nanowire FET

    by G. Espineira, D. Nagy, G. Indalecio, A. J. Garcia-Loureiro, K. Kalna, N. Seoane

    The effect of gate edge roughness (GER) in the sub-threshold region is studied for two state-of-the-art architectures: a 10.7-nm Si FinFET and a 10-nm Si gateall-around (GAA) nanowire (NW) FET using an in-house 3D quantum-corrected drift-diffusion simulation tool. The GER is applied to the device gate using the characteristic values of root-mean-square amplitude and correlation length (CL). The GER-induced variability results in a standard deviation (σ) for the threshold voltage (V T ) of 7 mV for the FinFET when CL/Gate Perimeter = 0.66 and RMS = 0.80 nm, which is 20% greater than that of the GAA NW FET. GER is a less damaging source of variability than metal grain granularity (MGG), line edge roughness (LER), and random dopants (RD) for both devices. When compared to LER variations, σV T due to the GER is 62% and 86% lower for the FinFET and GAA NW FET, respectively. However, although GER affects the FinFET more than the GAA NW FET, the combined variability effect of GER, MGG, LER, and RD (σV T,comb ) on the FinFET is 30 mV, a value approximately 50% smaller than that of the GAA NW FET.


  • Open Access

    Drift-Diffusion Versus Monte Carlo Simulated ON-Current Variability in Nanowire FETs

    by Daniel Nagy, Guillermo Indalecio, Antonio J. Garcia-Loureiro, Gabriel Espineira, Muhammad A. Elmessary, Karol Kalna, Natalia Seoane

    Variability of semiconductor devices is seriously limiting their performance at nanoscale. The impact of variability can be accurately and effectively predicted by computer aided simulations in order to aid future device designs. Quantum corrected (QC) drift-diffusion (DD) simulations are usually employed to estimate the variability of state-of-the-art non-planar devices but require meticulous calibration. More accurate simulation methods, such as QC Monte Carlo (MC), are considered time consuming and elaborate. Therefore, we predict TiN metal gate work-function granularity (MGG) and line edge roughness (LER) induced variability on a 10 nm gate length gate-all-around Si nanowire FET and perform a rigorous comparison of the QC DD and MC results. In case of the MGG, we have found that the QC DD predicted variability can have a difference up to 20 % in comparison with the QC MC predicted one. In case of the LER, we demonstrate that the QC DD can overestimate the QC MC simulation produced variability by a significant error of up to 56 %. This error between the simulation methods will vary with the root mean square (RMS) height and maximum source/drain n-type doping. Our results indicate that the aforementioned QC DD simulation technique yields inaccurate results for the ON-current variability.


  • FoMPy: A figure of merit extraction tool for semiconductor device simulations

    by Gabriel Espineira, Natalia Seoane, Daniel Nagy, Guillermo Indalecio, Antonio J. Garcia-Loureiro

    The aim of this work is to present an efficient tool that extracts the main figures of merit (FoM) of a semiconductors I-V curve and provides useful statistical parameters for variability studies. Two state-of-the-art devices have been used as benchmarks in order to show its capabilities. It includes several methods implemented to obtain the threshold voltage and allows the user to compare the results without compromising them by the methodology used. This study demonstrates the importance of choosing an appropriate method of extraction as the results may vary significantly thus making FoMPy an excellent tool to evaluate a device's performance.