Min Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Min Liu has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Xueling Quan
Center for Advanced Electronic Materials and Devices, Shanghai Jiao Tong University, Shanghai, China
3 shared publications - Jinbin Xu
Shanghai Jiao Tong University
2 shared publications Liying Wu
Center for Advanced Electronic Materials and Devices, Shanghai Jiao Tong University, Shanghai, China
2 shared publicationsXiulan Cheng
Center for Advanced Electronic Materials and Devices, Shanghai Jiao Tong University, Shanghai, China
2 shared publicationsLiucheng Fu
Center for Advanced Electronic Materials and Devices (AEMD), Shanghai Jiao Tong University, Shanghai, China
1 shared publicationMin Wang
Department of Electronic Engineering, Shanghai Jiao Tong University, Shanghai, China
1 shared publication
Latest Publications
- 24 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (14) , 765-768
Polarization Insensitive Edge Coupler Assisted by Subwavelength Grating and Suspended Structure
Based on the Si-Si3N4 hybrid photonic platform, an integrated edge coupler embedded with both sub-wavelength grating (SWG) waveguide and suspended structure was demonstrated. The proposed device structure and geometrical parameters were fully optimized to realize efficient optical interconnections with standard single-mode fiber (SMF-28). The coupling loss of 0.86 dB/port for TE mode and 0.94 dB/port for TM mode was achieved with a remarkable polarization dependent loss (PDL) less than 0.1 dB at the input wavelength of 1600 nm. It revealed that the integrated edge coupler assisted by sub-wavelength grating can further reduce the PDL. Moreover, the device also exhibited the advantages of large alignment tolerance. The alignment tolerances for 1-dB excess loss are ±1.8 and ±2.5 μm in horizontal and vertical direction, respectively.
- 24 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (14) , 765-768
Polarization Insensitive Edge Coupler Assisted by Subwavelength Grating and Suspended Structure
Based on the Si-Si3N4 hybrid photonic platform, an integrated edge coupler embedded with both sub-wavelength grating (SWG) waveguide and suspended structure was demonstrated. The proposed device structure and geometrical parameters were fully optimized to realize efficient optical interconnections with standard single-mode fiber (SMF-28). The coupling loss of 0.86 dB/port for TE mode and 0.94 dB/port for TM mode was achieved with a remarkable polarization dependent loss (PDL) less than 0.1 dB at the input wavelength of 1600 nm. It revealed that the integrated edge coupler assisted by sub-wavelength grating can further reduce the PDL. Moreover, the device also exhibited the advantages of large alignment tolerance. The alignment tolerances for 1-dB excess loss are ±1.8 and ±2.5 μm in horizontal and vertical direction, respectively.
- Open Access
- 2 August 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (17) , 21932-21943
Highly-efficient thin film LiNbO3 surface couplers connected by ridge-waveguide subwavelength gratings
- 2 August 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (17) , 21932-21943
Open AccessHighly-efficient thin film LiNbO3 surface couplers connected by ridge-waveguide subwavelength gratings
- 25 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 31 (5) , 349-352
Silicon-Nitride-Assisted Edge Coupler Interfacing With High Numerical Aperture Fiber
Reducing the mode size mismatch between high-index-contrast silicon waveguide and single mode fiber takes an important role in photonic integration. A low-loss and broadband silicon nitride assisted edge coupler for coupling of light between silicon wire waveguides and high numerical aperture fiber is proposed and optimized for TE polarization. The mode size converter is composed of silicon inverse taper waveguides in core and two silicon nitride interlayers spaced by silica in cladding layers. The edge coupler is characterized with cleaved high numerical aperture fiber (mode field diameter is about 6.5 μm). With the help of refractive index matching oil (n = 1.46), the coupling loss for TE polarized light input is 0.35 dB at 1570 nm. The 1-dB bandwidth is 95 nm. The 1-dB alignment tolerances are higher than ± 2.5 μm and ± 1 μm in the horizontal and vertical directions, respectively, and higher than 25 μm in axial direction.
- 25 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 31 (5) , 349-352
Silicon-Nitride-Assisted Edge Coupler Interfacing With High Numerical Aperture Fiber
Reducing the mode size mismatch between high-index-contrast silicon waveguide and single mode fiber takes an important role in photonic integration. A low-loss and broadband silicon nitride assisted edge coupler for coupling of light between silicon wire waveguides and high numerical aperture fiber is proposed and optimized for TE polarization. The mode size converter is composed of silicon inverse taper waveguides in core and two silicon nitride interlayers spaced by silica in cladding layers. The edge coupler is characterized with cleaved high numerical aperture fiber (mode field diameter is about 6.5 μm). With the help of refractive index matching oil (n = 1.46), the coupling loss for TE polarized light input is 0.35 dB at 1570 nm. The 1-dB bandwidth is 95 nm. The 1-dB alignment tolerances are higher than ± 2.5 μm and ± 1 μm in the horizontal and vertical directions, respectively, and higher than 25 μm in axial direction.