Felipe Serrão de Souza
Felipe Serrão de Souza has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Vincenzo Giordano
Prof. Nova Monteiro Orthopedics and Traumatology Service, Miguel Couto Municipal Hospital, Municipal Health Secretariat, Rio de Janeiro, Brazil
5 shared publications - Robinson Esteves Pires
Departamento do Aparelho Locomotor, Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, Brazil
4 shared publications - Pedro José Labronici
Fluminense Federal University, Niteroi, Brazil
3 shared publications - Alexandre Leme Godoy-Santos
Universidade de São Paulo, Brazil
2 shared publications - Anderson Freitas
HOME, Brasília, Brazil
2 shared publications - Hilton Augusto Koch
Departamento de Radiologia—Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro 21941-901, Brazil
2 shared publications
Latest Publications
- Open Access
- 24 November 2023
- Published by MDPI AG in Diagnostics
- Vol. 13 (23) , 3520
Biomechanical Efficacy of Three Methods for the Fixation of Posterior Malleolar Fractures: A Three-Dimensional Finite Element Study
Introduction: We investigated the biomechanical behaviour of different fixations of the tibial posterior malleolus (TPM), simulating distinct situations of involvement of the tibiotalar articular surface (TTAS) through a finite element model (FEM). Material and methods: A 3D computer-aided design model of the left ankle was obtained. The materials used were divided according to their characteristics into ductile and non-ductile, and all materials were assumed to be linear elastic, isotropic, and homogenous. Three different fracture lines of the TPM were defined, with sagittal angles of 10°, 25°, and 45°. For biomechanical comparison, different constructions using a trans-syndesmotic screw (TSS) only (Group T), a one-third tubular plate only with (Group PT) and without (Group PS) a TSS, and a locked compression plate with (Group LCPT) and without (Group LCPS) a TSS were tested. FEM was used to simulate the boundary conditions of vertical loading. Load application regions were selected in the direction of the 700 N Z-axis, 90% on the tibia and 10% on the fibula. Data on the displacement and stress in the FEM were collected, including the total principal maximum (MaxT) and total principal minimum (MinT) for non-ductile materials, total displacement (desT), localized displacement at the fragment (desL), localized displacement at syndesmosis (desS), and Von Mises equivalent stress for ductile materials. The data were analysed using ANOVA and multiple comparison LSD tests were used. Results: For TPM fractures with sagittal angles 10° and 25°, desL in the PT and LCP groups was significantly lower, as well as Von Mises stress in Group LCPT in 10°, and PT and LCPT groups in 25°. For TPM fractures with a sagittal angle of 45°, desL in the LCP group and Von Mises stress in Group LCPS and LCPT were significantly lower. We found that any TPM fracture may indicate instability of the distal tibiofibular syndesmosis, even when the fragment is small. Conclusion: Our study showed that in fragments involving 10% of the TTAS, the use of a TSS is sufficient, but when the involvement is greater than 25% of the TTAS, either a non-locked or locked plate must be used to buttress the TPM. In posterior fragments affecting 45% or more of the TTAS, the use of a locking plate is recommended.
- 24 November 2023
- Published by MDPI AG in Diagnostics
- Vol. 13 (23) , 3520
Open AccessBiomechanical Efficacy of Three Methods for the Fixation of Posterior Malleolar Fractures: A Three-Dimensional Finite Element Study
Introduction: We investigated the biomechanical behaviour of different fixations of the tibial posterior malleolus (TPM), simulating distinct situations of involvement of the tibiotalar articular surface (TTAS) through a finite element model (FEM). Material and methods: A 3D computer-aided design model of the left ankle was obtained. The materials used were divided according to their characteristics into ductile and non-ductile, and all materials were assumed to be linear elastic, isotropic, and homogenous. Three different fracture lines of the TPM were defined, with sagittal angles of 10°, 25°, and 45°. For biomechanical comparison, different constructions using a trans-syndesmotic screw (TSS) only (Group T), a one-third tubular plate only with (Group PT) and without (Group PS) a TSS, and a locked compression plate with (Group LCPT) and without (Group LCPS) a TSS were tested. FEM was used to simulate the boundary conditions of vertical loading. Load application regions were selected in the direction of the 700 N Z-axis, 90% on the tibia and 10% on the fibula. Data on the displacement and stress in the FEM were collected, including the total principal maximum (MaxT) and total principal minimum (MinT) for non-ductile materials, total displacement (desT), localized displacement at the fragment (desL), localized displacement at syndesmosis (desS), and Von Mises equivalent stress for ductile materials. The data were analysed using ANOVA and multiple comparison LSD tests were used. Results: For TPM fractures with sagittal angles 10° and 25°, desL in the PT and LCP groups was significantly lower, as well as Von Mises stress in Group LCPT in 10°, and PT and LCPT groups in 25°. For TPM fractures with a sagittal angle of 45°, desL in the LCP group and Von Mises stress in Group LCPS and LCPT were significantly lower. We found that any TPM fracture may indicate instability of the distal tibiofibular syndesmosis, even when the fragment is small. Conclusion: Our study showed that in fragments involving 10% of the TTAS, the use of a TSS is sufficient, but when the involvement is greater than 25% of the TTAS, either a non-locked or locked plate must be used to buttress the TPM. In posterior fragments affecting 45% or more of the TTAS, the use of a locking plate is recommended.
- Open Access
- 30 October 2023
- Published by MDPI AG in Preprints.org
Biomechanical Efficacy of Three Methods for the Fixation of Posterior Malleolar Fractures: A Three-Dimensional Finite Element Study
We investigated the biomechanical behaviour of different fixations of the tibial posterior malleolus (TPM), simulating distinct situations of involvement of the tibiotalar articular surface (TTAS) through a finite element model (FEM). A 3D computer-aided design model of the left ankle was obtained. The materials used were divided according to their characteristics into ductile and non-ductile, and all materials were assumed to be linear elastic, isotropic, and homogenous. Three different fracture lines of the TPM were defined, with sagittal angles of 10º, 25º, and 45º. For biomechanical comparison, different constructions using a trans-syndesmotic screw (TSS) only (Group T), a one-third tubular plate only with (Group PT) and without (Group PS) a TSS, and a locked compression plate with (Group LCPT) and without (Group LCPS) a TSS were tested. FEM was used to simulate the boundary conditions of vertical loading. Load application regions were selected in the direction of the 700N Z axis, 90% on the tibia and 10% on the fibula. Data on the displacement and stress in the FEM were collected, including the total principal maximum (MaxT) and total principal minimum (MinT) for non-ductile materials, total displacement (desT), localized displacement at the fragment (desL), localized displacement at syndesmosis (desS), and Von Mises equivalent stress for ductile materials. The data were analyzed using ANOVA and multiple comparison LSD tests were used. For TPM fractures with a sagittal angles 10º and 25º, desL in the PT and LCP groups was significantly lower, as well as Von Mises stress in Group LCPT in 10º, and PT and LCPT groups in 25º. TPM fractures with a sagittal angle of 45º, desL in the LCP group and Von Mises stress in Group LCPS and LCPT was significantly lower. We found that any TPM fracture may indicate instability of the distal tibiofibular syndesmosis, even when the fragment is small. Our study showed that in fragments involving 10% of the TTAS, the use of a TSS is sufficient, but when the involvement is greater than 25% of the TTAS, either non-locked or locked plate must be used to buttress the TPM. In posterior fragments affecting 45% or more of the TTAS, the use of a locking plate is recommended.
- 30 October 2023
- Published by MDPI AG in Preprints.org
Open AccessBiomechanical Efficacy of Three Methods for the Fixation of Posterior Malleolar Fractures: A Three-Dimensional Finite Element Study
We investigated the biomechanical behaviour of different fixations of the tibial posterior malleolus (TPM), simulating distinct situations of involvement of the tibiotalar articular surface (TTAS) through a finite element model (FEM). A 3D computer-aided design model of the left ankle was obtained. The materials used were divided according to their characteristics into ductile and non-ductile, and all materials were assumed to be linear elastic, isotropic, and homogenous. Three different fracture lines of the TPM were defined, with sagittal angles of 10º, 25º, and 45º. For biomechanical comparison, different constructions using a trans-syndesmotic screw (TSS) only (Group T), a one-third tubular plate only with (Group PT) and without (Group PS) a TSS, and a locked compression plate with (Group LCPT) and without (Group LCPS) a TSS were tested. FEM was used to simulate the boundary conditions of vertical loading. Load application regions were selected in the direction of the 700N Z axis, 90% on the tibia and 10% on the fibula. Data on the displacement and stress in the FEM were collected, including the total principal maximum (MaxT) and total principal minimum (MinT) for non-ductile materials, total displacement (desT), localized displacement at the fragment (desL), localized displacement at syndesmosis (desS), and Von Mises equivalent stress for ductile materials. The data were analyzed using ANOVA and multiple comparison LSD tests were used. For TPM fractures with a sagittal angles 10º and 25º, desL in the PT and LCP groups was significantly lower, as well as Von Mises stress in Group LCPT in 10º, and PT and LCPT groups in 25º. TPM fractures with a sagittal angle of 45º, desL in the LCP group and Von Mises stress in Group LCPS and LCPT was significantly lower. We found that any TPM fracture may indicate instability of the distal tibiofibular syndesmosis, even when the fragment is small. Our study showed that in fragments involving 10% of the TTAS, the use of a TSS is sufficient, but when the involvement is greater than 25% of the TTAS, either non-locked or locked plate must be used to buttress the TPM. In posterior fragments affecting 45% or more of the TTAS, the use of a locking plate is recommended.
- Open Access
Computed Tomography Does Not Improve Intra- and Interobserver Agreement of Hertel Radiographic Prognostic Criteria
Background and Objectives: Proximal humerus fractures are the second most frequent site of avascular necrosis (AVN), occurring in up to 16% of cases. The Hertel criteria have been used as a reference for the prediction of humerus head ischemia. However, these are based solely on the use of radiographs, which can make interpretation extremely difficult due to several reasons, such as the overlapping fragments, severity of the injury, and noncompliant acute pain patients. The objectives of the study were to evaluate the role of computed tomography (CT) in the interpretation of the Hertel criteria and to evaluate the intra- and interobserver agreement of orthopedic surgeons, comparing their area of expertise. Materials and Methods: The radiographs and CT scans of 20 skeletally mature patients who had fractures of the proximal humerus were converted to jpeg and mov, respectively. All images were evaluated by eight orthopedic surgeons (four trauma surgeons and four shoulder surgeons) in two different occasions. The intra- and interobserver agreement was assessed by using the Kappa coefficient. The level of significance was 5%. Results: There was a weak-to-moderate intraobserver agreement (κ < 0.59) for all examiners. Only the medial metaphyseal hinge greater than 2 mm was identified by 87.5% of evaluators both in the radiographic and CT examinations in the two rounds of the study (p < 0.05). There was no significant interobserver agreement (κ < 0.19), as it occurred only in some moments of the second round of evaluation. Conclusions: The prognostic criteria for humeral head ischemia evaluated in this study showed weak intra- and interobserver agreement in both the radiographic and tomographic evaluation. CT did not help surgeons in the primary interpretation of Hertel prognostic criteria used in this study when compared to the radiographic examination.
Open AccessComputed Tomography Does Not Improve Intra- and Interobserver Agreement of Hertel Radiographic Prognostic Criteria
Background and Objectives: Proximal humerus fractures are the second most frequent site of avascular necrosis (AVN), occurring in up to 16% of cases. The Hertel criteria have been used as a reference for the prediction of humerus head ischemia. However, these are based solely on the use of radiographs, which can make interpretation extremely difficult due to several reasons, such as the overlapping fragments, severity of the injury, and noncompliant acute pain patients. The objectives of the study were to evaluate the role of computed tomography (CT) in the interpretation of the Hertel criteria and to evaluate the intra- and interobserver agreement of orthopedic surgeons, comparing their area of expertise. Materials and Methods: The radiographs and CT scans of 20 skeletally mature patients who had fractures of the proximal humerus were converted to jpeg and mov, respectively. All images were evaluated by eight orthopedic surgeons (four trauma surgeons and four shoulder surgeons) in two different occasions. The intra- and interobserver agreement was assessed by using the Kappa coefficient. The level of significance was 5%. Results: There was a weak-to-moderate intraobserver agreement (κ < 0.59) for all examiners. Only the medial metaphyseal hinge greater than 2 mm was identified by 87.5% of evaluators both in the radiographic and CT examinations in the two rounds of the study (p < 0.05). There was no significant interobserver agreement (κ < 0.19), as it occurred only in some moments of the second round of evaluation. Conclusions: The prognostic criteria for humeral head ischemia evaluated in this study showed weak intra- and interobserver agreement in both the radiographic and tomographic evaluation. CT did not help surgeons in the primary interpretation of Hertel prognostic criteria used in this study when compared to the radiographic examination.
- Open Access
Limb Salvage after Lower-Leg Fracture and Popliteal Artery Transection—The Role of Vessel-First Strategy and Bone Fixation Using the Ilizarov External Fixator Device: A Case Report
Open traumatic lesion of the popliteal artery is relatively rare. Ischemia time longer than 6 h and severity of limb ischemia have been shown to be associated with an increased risk of limb loss. Severe local infection is critical in the presence of major soft tissue trauma or open fractures. We report the case of a young female who suffered a traumatic transection of the popliteal artery associated with an open fracture of the distal tibia and fibula managed by direct vessel reconstruction with an end-to-end repair and skeletal stabilization initially with half-pin external fixation, then replaced by an Ilizarov circular frame. The patient had a very satisfactory outcome, but the fracture healed malunited, later corrected by open reduction and internal fixation with lag-screwing and a neutralization plate.
Open AccessLimb Salvage after Lower-Leg Fracture and Popliteal Artery Transection—The Role of Vessel-First Strategy and Bone Fixation Using the Ilizarov External Fixator Device: A Case Report
Open traumatic lesion of the popliteal artery is relatively rare. Ischemia time longer than 6 h and severity of limb ischemia have been shown to be associated with an increased risk of limb loss. Severe local infection is critical in the presence of major soft tissue trauma or open fractures. We report the case of a young female who suffered a traumatic transection of the popliteal artery associated with an open fracture of the distal tibia and fibula managed by direct vessel reconstruction with an end-to-end repair and skeletal stabilization initially with half-pin external fixation, then replaced by an Ilizarov circular frame. The patient had a very satisfactory outcome, but the fracture healed malunited, later corrected by open reduction and internal fixation with lag-screwing and a neutralization plate.
- Open Access
- 1 January 2014
- Published by Springer Nature in Patient Safety in Surgery
- Vol. 8 (1) , 26
Is the surgical knot tying technique associated with a risk for unnoticed glove perforation? An experimental study
The issue of safety in the surgical procedure has recently been widely and openly discussed at the World Health Organization. The use of latex gloves is the current standard of protection during surgery, as they remain intact throughout the procedure. The present study was designed to evaluate the rate of glove perforation during a two-hand technique using polyester sutures in a controlled experimental study.
- 1 January 2014
- Published by Springer Nature in Patient Safety in Surgery
- Vol. 8 (1) , 26
Open AccessIs the surgical knot tying technique associated with a risk for unnoticed glove perforation? An experimental study
The issue of safety in the surgical procedure has recently been widely and openly discussed at the World Health Organization. The use of latex gloves is the current standard of protection during surgery, as they remain intact throughout the procedure. The present study was designed to evaluate the rate of glove perforation during a two-hand technique using polyester sutures in a controlled experimental study.