RPRudra Pratap

Rudra Pratap

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rudra Pratap has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pinning Characteristics of Zr and Hf- Added REBCO Coated Conductors Made by Advanced MOCVD in Low-to-High Magnetic Fields

    by Eduard Galstyan, Rudra Pratap, Mahesh Paidpilli, Goran Majkic, Venkat Selvamanickam

    BaMO 3 (M = Zr, Hf) pinning centers introduced in REBa 2 Cu 3 O 7-x (REBCO and RE = rare earth) coated conductors yield superior performance in high magnetic fields. We present the critical current density J c over a temperature range of 4.2-77 K and magnetic fields of 0-14 T (B || c-axis), of 5-15 mol.% Zr- and Hf- added REBCO 4+ μm thick film tapes fabricated by advanced metal organic chemical vapor deposition (A-MOCVD). The morphology of self-assembled BMO nanorods aligned along c-axis is found to be dependent on the Zr/Hf content. We also observe a correlation between the density of RE 2 O 3 in-plane nanoprecipitates and the continuity and concentration of BMO nanorods in films of different Ba content. It is found that the (Ba + M)/Cu (M = Zr, Hf) content in REBa 2 Cu 3 O 7-x affects the shape of pinning force density curves over a wide magnetic field range and temperatures below 20 K. Another remarkable observation is the similarity in the critical current properties of Hf and Zr- added REBCO films as function of (Ba + M)/Cu content at intermediate to high range of (Ba + M)/Cu content. A quantitative analysis of pinning efficiency and correlation with the microstructure of Zr and Hf- added REBCO coated conductors is discussed.


  • Growth of High-Performance 4-5μm Thick Film REBCO Tapes Doped With Hafnium Using Advanced MOCVD

    by Mahesh Paidpilli, Rudra Pratap, Mehdi Kochat, Eduard Galstyan, Chirag Goel, Goran Majkic, Venkat Selvamanickam

    Advanced metal organic chemical vapor deposition technique (A-MOCVD) was used to grow 4-5 μm thick REBa 2 Cu 3 O 7-δ (REBCO, RE = rare earth) films, doped with 5% and 15% Hf. Thick REBCO films doped with 5% Hf exhibit self-field critical current density (J c ) over 1.8 MA/cm 2 at 77 K and 3 MA/cm 2 at 65 K, 1.5 T. Increasing the Hf content to 15% resulted in J c above 9 MA/cm 2 at 20 K, 9 T. The effect of (Ba+Hf)/Cu content in Hf-added (5 and 15 mol.%) REBCO films on the critical current density at 77 K, 0 T, c-axis lattice parameter and out-of- plane texture has been studied. In addition to growth of thick film REBCO tapes with superior performance, the A-MOCVD reactor has been used to quadruple the precursor-to-film conversion efficiency above 45%. This achievement has a first order impact in lowering the cost of REBCO tapes made by A-MOCVD.


  • Scale Up of High-Performance REBCO Tapes in a Pilot-Scale Advanced MOCVD Tool With In-Line 2D-XRD System

    by Siwei Chen, Goran Majkic, Rohit Jain, Rudra Pratap, Vasish Mohan, Chirag Goel, Venkat Selvamanickam

    We have reported the development of an Advanced Metal-Organic Chemical Vapor Deposition (A-MOCVD) method featuring ohmic heating of the substrate for REBCO film growth, direct tape temperature monitoring, and laminar precursor flow. This A-MOCVD method has been used to fabricate 4-5 μm thick film REBCO tapes with record-high performance: critical currents exceeding 8700 A/12 mm at 30 K, 3 T; and engineering current density of 5200 A/mm 2 at 4.2 K, 15 T. Recently, we constructed a pilot-scale reel-to-reel A-MOCVD system to scale up the technology to long tapes. Preliminary batches of tapes exhibit consistent performance and good uniformity along the length. An in-line 2D X-ray Diffraction (XRD) system has been integrated into the pilot A-MOCVD tool to monitor the REBCO texture and composition, RE 2 O 3 content, and the dimensions of BaMO 3 (BMO, M=Zr,Hf) nanorods that act as artificial pinning centers. Specifically, the streaking angle between REBCO (103) and BZO (101) has been found to correlate well with (Ba+M)/Cu of the film, lift factor in critical current over a range of temperatures and magnetic fields, and the size of the BMO nanorods. The in-line 2D-XRD is expected to serve as a valuable quality measuring tool supporting realtime feedback control for the process to yield uniform and consistent manufacturing of high-performance REBCO tapes by Advanced MOCVD.


  • Significant texture improvement in single-crystalline-like materials on low-cost flexible metal foils through growth of silver thin films

    by Yongkuan Li, Sicong Sun, Ying Gao, Yao Yao, Eduard Galstyan, Pratap Rudra, Monika Rathi, Pavel Dutta, Sara Pouladi, Jae Hyun Ryou, et al.

    Low texture spreads of single-crystalline-like materials are critical for high performance of low-cost flexible semiconductors and second-generation high-temperature superconductors based on metal foils. For texture improvement, a single-crystalline-like Ag film is epitaxially grown on an ion-beam-assisted deposition TiN substrate using magnetron sputtering. Ultra-low texture spreads are found in the thin Ag film (∼330 nm), with an out-of-plane texture spread (Δω) of ∼1.03° and an in-plane texture spread (Δϕ) of ∼1.34°. Compared with the texture spreads of the TiN substrate, Δω and Δϕ of the Ag film are reduced by ∼42 and ∼79%, respectively. Applying this Ag buffer, the texture spreads of a single-crystalline-like Ge film are reduced by ∼37% (Δω) and ∼36% (Δϕ). Factors contributing to the texture improvement by Ag are studied using single-crystalline-like Ag films with various thicknesses.


  • Correlation of In-Field Performance of Thick REBCO Films Between 0–14 T and 4.2–77 K

    by Goran Majkic, Rudra Pratap, Eduard Galstyan, Venkat Selvamanickam

    We present results on correlation of in-field performance of 2G-high temperature superconductor (HTS) tapes produced by an advanced metal organic chemical vapor deposition (A-MOCVD) system which enables growth of very thick films (>4 μm) without deterioration in performance with thickness. A set of 175 samples has been measured using a vibrating sample magnetometer (VSM), at temperatures ranging from 4.2 to 77 K and field from 0 to 14 T (B⊥tape). The sample set contains a wide range of characteristics, with Zr doping from 0 to 20 mol.%, film thickness from 1 to over 4 μm and a range of compositions with varying rare earth (RE) excess, as well as varying Ba/Cu stoichiometry. The set has been purposely chosen to include a very wide range of properties, with the goal of identifying common features of REBCO conductors that are independent of the listed variables. The in-field critical current density (Jc) performance has been separated into two factors, temperature dependent self-field Jc and field and temperature dependent retention factor. The results reveal very systematic trends in maximum Jc correlation with temperature and field, which can be utilized both for long length characterization and as a tool for providing insight into pinning mechanisms.


  • Electromagnetic Properties of Thick Film REBCO Tapes

    by Mehdi Kochat, Rudra Pratap, Eduard Galstyan, Goran Majkic, Venkat Selvamanickam

    RE-Ba-Cu-O (REBCO, RE=rare earth) coated conductors are characterized by an anisotropic pinning behavior in applied magnetic fields. Over the years, incorporation of $\rm BaZrO_3$ nano-columns has been an effective approach to improve the pinning force and reduce the anisotropy in these materials. In this work, the magnetic field dependence of critical current density $(J_c)$ of 4.7 μm thick films grown by advanced metal-organic chemical vapor deposition (A-MOCVD) with 5% and 15% Zr addition has been studied. At 65 K, 1.5 T, the 5% Zr-added thick films manifest a $J_c$ at H||c-axis that surpasses $\rm 3 MA/cm^2$ . Increasing the Zr content to 15% results in a plateau in $J_c$ from 0.4 to 6.5 T and enables higher values of $J_c$ at fields above 6 T at 65 K. Tapes with 15% of added Zr exhibit a lift factor in critical current density ( $J_c$ (Temperature, Applied Magnetic Field / $J_c$ (77 K, 0 T))exceeding 13 and a $J_c$ exceeding $\rm 11 MA/cm^2$ at 30 K, 3 T.


  • Growth of High-Performance Thick Film REBCO Tapes Using Advanced MOCVD

    by Rudra Pratap, Goran Majkic, Eduard Galstyan, Girupaakaran Mohanasundaram, Sanku Chakradhar, Venkat Selvamanickam

    An Advanced Metal Organic Chemical Vapor Deposition MOCVD (A-MOCVD) reactor has been used to deposit 4+-μm-thick undoped (Gd,Y)BaCuO tapes in a single pass, with consistent critical current above 1400 A/12 mm and critical current density above 2.6 MA/cm 2 at 77 K, 0 T. The highest self-field critical current over 1660 A/12 mm and critical current density of 3.3 MA/cm 2 are among the best values ever reported in 4+-μm-thick REBCO films. Also, A-MOCVD reactor has been used to grow over 4.5-μm-thick, 5 mol% Zr-doped REBCO films, with ∼45% precursor-to-film conversion efficiency, which is more than four times higher than that achieved in conventional MOCVD reactors. Excellent in-plane and out-of-plane texture values below 2.35° and 1.25°, respectively, have been achieved. Onset critical temperature ( T c ) is in the range of 92.5–93.5 K and transition width (Δ T c ) is below 1 K. This remarkable demonstration of growth of 4+-μm-thick doped (Gd,Y)BaCuO films with double deposition rate, 4× improvement in precursor-to-film conversion efficiency, and excellent critical current makes A-MOCVD an attractive approach for the manufacturing of low-cost, high-performance superconductor tapes.