Léa Lévy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Léa Lévy has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Anders Vest Christiansen
Department of Geoscience, Aarhus University, Aarhus, Denmark
2 shared publications - Andreas Weller
Institute of Geotechnology and Mineral Resources, Clausthal University of Technology , 38678 Clausthal-Zellerfeld
2 shared publications - Daniel A. Ciraula
Department of Geology and Geophysics University of Wyoming Laramie WY USA
2 shared publications - Delphine Roubinet
CNRS UMR5243, University of Montpellier
2 shared publications - Léa Lelimouzin
Géosciences Montpellier University of Montpellier CNRS Montpellier France
2 shared publications - Poul Løgstrup Bjerg
Department of Environmental Engineering Technical University of Denmark Lyngby Denmark
2 shared publications
Latest Publications
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Propriétés électriques des roches volcaniques altérées : observations et interprétations basées sur des mesures en laboratoire, terrain et forage au volcan Krafla, Islande.
Afin de cartographier la structure souterraine des volcans et détecter des ressources géothermiques de haute température, on utilise souvent l’imagerie de résistivité électrique. La résistivité électrique des volcans est affectée par plusieurs facteurs: volume et salinité de l’eau interstitielle, abondance de minéraux conducteurs, température de la roche et présence de magma. Ce travail de thèse tente de contraindre l'interprétation des structures de résistivité électrique autour des volcans actifs, afin de développer des outils innovants pour l'exploration des ressources géothermiques. La contribution des minéraux conducteurs est au cœur de la thèse: conducteurs ioniques solides (minéraux argileux, en particulier la smectite) ou semi-conducteurs électroniques (pyrite, oxydes de fer), mais l’influence de la porosité, de la salinité, de la température et de la présence de magma est aussi étudiée. La thèse utilise le volcan Krafla comme terrain d’étude pour affiner les interprétations des structures de résistivité électriques, du fait de la disponibilité de carottes, de données, de bibliographie et d’infrastructure. La smectite et la pyrite sont formées par altération hydrothermale des roches volcaniques et témoignent ainsi des convections hydrothermales. Les oxydes de fer en revanche sont plutôt formés lors de la cristallisation du magma et sont dissous lors des circulations hydrothermales. La contribution de la smectite à la conductivité électrique de roches volcaniques, saturées en eau à différentes salinités, est d'abord étudiée en laboratoire (à température ambiante) par spectroscopie d’impédance électrique « résistivité complexe ». Des variations non linéaires de la conductivité électrique à 1 kHz avec la salinité sont observées et discutées. La conduction interfoliaire est suggérée comme un mécanisme important par lequel la smectite conduit le courant électrique. L'influence de la pyrite et des oxydes de fer sur les effets de polarisation provoquée est ensuite analysée en utilisant l'angle de phase de l'impédance, qui dépend de la fréquence. Un angle de phase maximal supérieur à 20 mrad est attribué à la pyrite si la roche est conductrice et aux oxydes de fer si la roche est résistive. L'angle de phase maximal augmente d'environ 22 mrad pour chaque pourcent de pyrite ou d'oxyde de fer. Ces résultats de laboratoire en domaine fréquentiel sont appliqués à l’interprétation de tomographies de résistivité complexe sur le terrain en domaine temporel. Smectite, pyrite et oxydes de fer ont pu être identifiés jusqu'à 200 m de profondeur. La température in-situ, plus élevées qu’en laboratoire, semble augmenter la conductivité de la smectite. De manière générale, la tomographie de résistivité complexe est recommandée comme méthode complémentaire aux sondages électromagnétiques pour l'exploration géothermique.
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Propriétés électriques des roches volcaniques altérées : observations et interprétations basées sur des mesures en laboratoire, terrain et forage au volcan Krafla, Islande.
Afin de cartographier la structure souterraine des volcans et détecter des ressources géothermiques de haute température, on utilise souvent l’imagerie de résistivité électrique. La résistivité électrique des volcans est affectée par plusieurs facteurs: volume et salinité de l’eau interstitielle, abondance de minéraux conducteurs, température de la roche et présence de magma. Ce travail de thèse tente de contraindre l'interprétation des structures de résistivité électrique autour des volcans actifs, afin de développer des outils innovants pour l'exploration des ressources géothermiques. La contribution des minéraux conducteurs est au cœur de la thèse: conducteurs ioniques solides (minéraux argileux, en particulier la smectite) ou semi-conducteurs électroniques (pyrite, oxydes de fer), mais l’influence de la porosité, de la salinité, de la température et de la présence de magma est aussi étudiée. La thèse utilise le volcan Krafla comme terrain d’étude pour affiner les interprétations des structures de résistivité électriques, du fait de la disponibilité de carottes, de données, de bibliographie et d’infrastructure. La smectite et la pyrite sont formées par altération hydrothermale des roches volcaniques et témoignent ainsi des convections hydrothermales. Les oxydes de fer en revanche sont plutôt formés lors de la cristallisation du magma et sont dissous lors des circulations hydrothermales. La contribution de la smectite à la conductivité électrique de roches volcaniques, saturées en eau à différentes salinités, est d'abord étudiée en laboratoire (à température ambiante) par spectroscopie d’impédance électrique « résistivité complexe ». Des variations non linéaires de la conductivité électrique à 1 kHz avec la salinité sont observées et discutées. La conduction interfoliaire est suggérée comme un mécanisme important par lequel la smectite conduit le courant électrique. L'influence de la pyrite et des oxydes de fer sur les effets de polarisation provoquée est ensuite analysée en utilisant l'angle de phase de l'impédance, qui dépend de la fréquence. Un angle de phase maximal supérieur à 20 mrad est attribué à la pyrite si la roche est conductrice et aux oxydes de fer si la roche est résistive. L'angle de phase maximal augmente d'environ 22 mrad pour chaque pourcent de pyrite ou d'oxyde de fer. Ces résultats de laboratoire en domaine fréquentiel sont appliqués à l’interprétation de tomographies de résistivité complexe sur le terrain en domaine temporel. Smectite, pyrite et oxydes de fer ont pu être identifiés jusqu'à 200 m de profondeur. La température in-situ, plus élevées qu’en laboratoire, semble augmenter la conductivité de la smectite. De manière générale, la tomographie de résistivité complexe est recommandée comme méthode complémentaire aux sondages électromagnétiques pour l'exploration géothermique.
- Open Access
- 28 January 2026
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 245 (1)
Constraining time-lapse geophysical responses with reactive transport modelling: an approach to monitor H2S mineral storage
SUMMARY: Geothermal energy production emits significant amounts of hydrogen sulfide (H$_2$S). A strategy to mitigate the emissions is to reinject the H$_2$S into basaltic formations, where it reacts with the rock to form pyrite. Due to the polarization properties of pyrite, the direct current resistivity (DC) and induced polarization (IP) geophysical method (i.e. DCIP) has shown the potential for monitoring H$_2$S mineral storage. However, field applications of DCIP monitoring have been limited by the low spatial coverage of wireline logging and by the ambiguity in interpreting IP signals due to multiple processes that contribute to the polarization response. This study integrates DCIP with field-scale reactive transport modelling, utilizing both synthetic modelling and field investigations, to assess the ability of surface and cross-hole DCIP to monitor H$_2$S mineral storage at the Nesjavellir study site in Iceland. Two surface DCIP data sets were collected at Nesjavellir, with six months of continuous H$_2$S injection between them. Time-lapse inversions, performed using a novel gridding scheme that accounts for electrode misplacement between the two DCIP surveys, recover no significant IP changes beyond data noise. Interpreting these results alongside the reactive transport results finds that pyrite mineralization during the six-month injection period is too small and too deep to be resolved by surface DCIP time-lapse surveying, highlighting the benefit of a joint geophysical–geochemical interpretation approach. Conversely, joint DCIP-reactive transport synthetic modelling shows the potential of cross-hole DCIP for monitoring long-term H$_2$S mineral storage, provided that data noise is low and sufficient H$_2$S is injected. The reactive transport models also provide insight into the mechanisms contributing to the polarization response, demonstrating that pyrite mineralization is the primary contributor to the polarization response, with minimal contribution from other minerals such as smectites and iron oxides. However, existing petrophysical relationships are simplistic, which adds uncertainty to the interpretation of the DCIP signal and the quantification of pyrite mineralization. Additionally, smectite formation has been shown to decrease both the polarization signals and the quality of the IP data due to its electrically conductive properties. At Nesjavellir, a decrease in the DC resistivity from 1925 to 325 $\Omega$m is observed, attributed to the disposal of warm wastewater. This decrease is identified by comparing resistivity data collected in this study to historical vertical electrical sounding data collected prior to geothermal development. Lastly, petrophysical relationships linking DC resistivity, smectite content and permeability suggest a high basalt fracture permeability of 7.9$\times 10^{-12}$ m$^2$, which agrees with values recovered through flow model calibrations. This result demonstrates the value of geophysical surveying not only for monitoring but also for constraining key parameters in reactive transport simulations.- 28 January 2026
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 245 (1)
Open AccessConstraining time-lapse geophysical responses with reactive transport modelling: an approach to monitor H2S mineral storage
SUMMARY: Geothermal energy production emits significant amounts of hydrogen sulfide (H$_2$S). A strategy to mitigate the emissions is to reinject the H$_2$S into basaltic formations, where it reacts with the rock to form pyrite. Due to the polarization properties of pyrite, the direct current resistivity (DC) and induced polarization (IP) geophysical method (i.e. DCIP) has shown the potential for monitoring H$_2$S mineral storage. However, field applications of DCIP monitoring have been limited by the low spatial coverage of wireline logging and by the ambiguity in interpreting IP signals due to multiple processes that contribute to the polarization response. This study integrates DCIP with field-scale reactive transport modelling, utilizing both synthetic modelling and field investigations, to assess the ability of surface and cross-hole DCIP to monitor H$_2$S mineral storage at the Nesjavellir study site in Iceland. Two surface DCIP data sets were collected at Nesjavellir, with six months of continuous H$_2$S injection between them. Time-lapse inversions, performed using a novel gridding scheme that accounts for electrode misplacement between the two DCIP surveys, recover no significant IP changes beyond data noise. Interpreting these results alongside the reactive transport results finds that pyrite mineralization during the six-month injection period is too small and too deep to be resolved by surface DCIP time-lapse surveying, highlighting the benefit of a joint geophysical–geochemical interpretation approach. Conversely, joint DCIP-reactive transport synthetic modelling shows the potential of cross-hole DCIP for monitoring long-term H$_2$S mineral storage, provided that data noise is low and sufficient H$_2$S is injected. The reactive transport models also provide insight into the mechanisms contributing to the polarization response, demonstrating that pyrite mineralization is the primary contributor to the polarization response, with minimal contribution from other minerals such as smectites and iron oxides. However, existing petrophysical relationships are simplistic, which adds uncertainty to the interpretation of the DCIP signal and the quantification of pyrite mineralization. Additionally, smectite formation has been shown to decrease both the polarization signals and the quality of the IP data due to its electrically conductive properties. At Nesjavellir, a decrease in the DC resistivity from 1925 to 325 $\Omega$m is observed, attributed to the disposal of warm wastewater. This decrease is identified by comparing resistivity data collected in this study to historical vertical electrical sounding data collected prior to geothermal development. Lastly, petrophysical relationships linking DC resistivity, smectite content and permeability suggest a high basalt fracture permeability of 7.9$\times 10^{-12}$ m$^2$, which agrees with values recovered through flow model calibrations. This result demonstrates the value of geophysical surveying not only for monitoring but also for constraining key parameters in reactive transport simulations. - Open Access
- 29 October 2024
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 51 (21)
Preferential Pathways Inversion From Cross‐Borehole Electrical Data
Identification of preferential flow‐paths, such as fractures, is required for various issues in geosciences. When chemicals are injected into the subsurface, monitoring the resulting structural and chemical changes remains a challenge. The ability of geophysical tomography to tackle this problem is not fully explored due to the lack of numerical methods suitable for modeling narrow structures. We explore how discrete representation of preferential flow‐paths provides innovative ways to invert electrical resistivity data collected during reagent injection at a contaminated site. The data set is inverted with a scheme where a new fracture is added at every iteration. This allows identifying newly created narrow conductive structures from the field data collected before and after injection. Fracture location remains overall consistent despite using different starting points for the fracture search. A prior constraint on fracture length improves convergence. These results show the potential of discrete inversion for identifying narrow structures from electrical resistivity monitoring.
- 29 October 2024
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 51 (21)
Open AccessPreferential Pathways Inversion From Cross‐Borehole Electrical Data
Identification of preferential flow‐paths, such as fractures, is required for various issues in geosciences. When chemicals are injected into the subsurface, monitoring the resulting structural and chemical changes remains a challenge. The ability of geophysical tomography to tackle this problem is not fully explored due to the lack of numerical methods suitable for modeling narrow structures. We explore how discrete representation of preferential flow‐paths provides innovative ways to invert electrical resistivity data collected during reagent injection at a contaminated site. The data set is inverted with a scheme where a new fracture is added at every iteration. This allows identifying newly created narrow conductive structures from the field data collected before and after injection. Fracture location remains overall consistent despite using different starting points for the fracture search. A prior constraint on fracture length improves convergence. These results show the potential of discrete inversion for identifying narrow structures from electrical resistivity monitoring.
- Open Access
- 11 July 2024
- Published by Wiley
Preferential pathways inversion from cross-borehole electrical data
- 11 July 2024
- Published by Wiley
Open AccessPreferential pathways inversion from cross-borehole electrical data
- Open Access
- 10 June 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (25) , 11128-11139
Advanced Monitoring of H2S Injection through the Coupling of Reactive Transport Models and Geophysical Responses
Hydrogen sulfide (H2S), an environmentally harmful pollutant, is a byproduct of geothermal energy production. To reduce the H2S emissions, H2S-charged water is injected into the basaltic subsurface, where it mineralizes to iron sulfides. Here, we couple geophysical induced polarization (IP) measurements in H2S injection wells and geochemical reactive transport models (RTM) to monitor the H2S storage efforts in the subsurface of Nesjavellir, one of Iceland’s most productive geothermal fields. An increase in the IP response after 40 days of injection indicates iron-sulfide formation near the injection well. Likewise, the RTM shows that iron sulfides readily form at circumneutral to alkaline pH conditions, and the iron supply from basalt dissolution limits its formation. Agreement in the trends of the magnitude and distribution of iron-sulfide formation between IP and RTM suggests that coupling the methods can improve the monitoring of H2S mineralization by providing insight into the parameters influencing iron-sulfide formation. In particular, accurate fluid flow parameters in RTMs are critical to validate the predictions of the spatial distribution of subsurface iron-sulfide formation over time obtained through IP observations. This work establishes a foundation for expanding H2S sequestration monitoring efforts and a framework for coupling geophysical and geochemical site evaluations in environmental studies.
- 10 June 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (25) , 11128-11139
Open AccessAdvanced Monitoring of H2S Injection through the Coupling of Reactive Transport Models and Geophysical Responses
Hydrogen sulfide (H2S), an environmentally harmful pollutant, is a byproduct of geothermal energy production. To reduce the H2S emissions, H2S-charged water is injected into the basaltic subsurface, where it mineralizes to iron sulfides. Here, we couple geophysical induced polarization (IP) measurements in H2S injection wells and geochemical reactive transport models (RTM) to monitor the H2S storage efforts in the subsurface of Nesjavellir, one of Iceland’s most productive geothermal fields. An increase in the IP response after 40 days of injection indicates iron-sulfide formation near the injection well. Likewise, the RTM shows that iron sulfides readily form at circumneutral to alkaline pH conditions, and the iron supply from basalt dissolution limits its formation. Agreement in the trends of the magnitude and distribution of iron-sulfide formation between IP and RTM suggests that coupling the methods can improve the monitoring of H2S mineralization by providing insight into the parameters influencing iron-sulfide formation. In particular, accurate fluid flow parameters in RTMs are critical to validate the predictions of the spatial distribution of subsurface iron-sulfide formation over time obtained through IP observations. This work establishes a foundation for expanding H2S sequestration monitoring efforts and a framework for coupling geophysical and geochemical site evaluations in environmental studies.
- Open Access
- 3 June 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 129 (6)
Understanding the Fate of H2S Injected in Basalts by Means of Time‐Domain Induced Polarization Geophysical Logging
To help meet emission standards, hydrogen sulfide (H2S) from geothermal production may be injected back into the subsurface, where basalt offers, in theory, the capacity to mineralize H2S into pyrite. Ensuring the viability of this pollution mitigation technology requires information on how much H2S is mineralized, at what rate and where. To date, monitoring efforts of field‐scale H2S reinjection have mostly occurred via mass balance calculations, typically capturing less than 5% of the injected fluid. While these studies, along with laboratory experiments and geochemical models, conclude effective H2S mineralization, their extrapolation to quantify mineralization and its persistence over time leads to considerable uncertainty. Here, a geophysical methodology, using time‐domain induced polarization (TDIP) logging in two of the injection wells (NN3 and NN4), is developed as a complementary tool to follow the fate of H2S re‐injected at Nesjavellir geothermal site (Iceland). Results show a strong chargeability increase at +40 days, interpreted as precipitation of up to 2 vol.% based on laboratory relationships. A uniform increase is observed along NN4, whereas it is localized below 450 m in NN3. Changes are more pronounced with larger electrode spacing, indicating that pyrite precipitation takes place away from the wells. Furthermore, a chargeability decrease is observed at later monitoring rounds in both wells, suggesting that pyrite is either passivated or re‐dissolved after precipitating. These results highlight that a sequence of overlapping reactive processes (pyrite precipitation, passivation, pore clogging and possibly pyrite re‐dissolution) results from H2S injection and that TDIP monitoring is sensitive to this sequence.
- 3 June 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 129 (6)
Open AccessUnderstanding the Fate of H2S Injected in Basalts by Means of Time‐Domain Induced Polarization Geophysical Logging
To help meet emission standards, hydrogen sulfide (H2S) from geothermal production may be injected back into the subsurface, where basalt offers, in theory, the capacity to mineralize H2S into pyrite. Ensuring the viability of this pollution mitigation technology requires information on how much H2S is mineralized, at what rate and where. To date, monitoring efforts of field‐scale H2S reinjection have mostly occurred via mass balance calculations, typically capturing less than 5% of the injected fluid. While these studies, along with laboratory experiments and geochemical models, conclude effective H2S mineralization, their extrapolation to quantify mineralization and its persistence over time leads to considerable uncertainty. Here, a geophysical methodology, using time‐domain induced polarization (TDIP) logging in two of the injection wells (NN3 and NN4), is developed as a complementary tool to follow the fate of H2S re‐injected at Nesjavellir geothermal site (Iceland). Results show a strong chargeability increase at +40 days, interpreted as precipitation of up to 2 vol.% based on laboratory relationships. A uniform increase is observed along NN4, whereas it is localized below 450 m in NN3. Changes are more pronounced with larger electrode spacing, indicating that pyrite precipitation takes place away from the wells. Furthermore, a chargeability decrease is observed at later monitoring rounds in both wells, suggesting that pyrite is either passivated or re‐dissolved after precipitating. These results highlight that a sequence of overlapping reactive processes (pyrite precipitation, passivation, pore clogging and possibly pyrite re‐dissolution) results from H2S injection and that TDIP monitoring is sensitive to this sequence.
- Open Access
- 1 December 2023
- Published by Wiley
Understanding the fate of H2S injected in basalts by means of time-domain induced polarization geophysical logging
To help meet emission standards, hydrogen sulfide (H2S) from geothermal production may be injected back into the subsurface, where basalt offers, in theory, the capacity to mineralize H2S into pyrite. Ensuring the viability of this pollution mitigation technology requires information on how much H2S is mineralized, at what rate and where. To date, monitoring efforts of field-scale H2S reinjection have mostly occurred via mass balance calculations, typically capturing less than 5\% of the injected fluid. While these studies, along with laboratory experiments and geochemical models, conclude effective H2S mineralization, their extrapolation to quantify mineralization and its persistence over time leads to considerable uncertainty. Here, a geophysical methodology, using time-domain induced polarization (TDIP) logging in two of the injection wells (NN3 and NN4), is developed to follow the fate of H2S re-injected at Nesjavellir geothermal site in south-west Iceland. Results show a strong chargeability increase at +40 days, corresponding to precipitation of up to 1\% in NN4 and 2\% in NN3 according to laboratory-based relationships. A uniform increase is observed along NN4, whereas it is localized below 450 in NN3. Changes are more pronounced with the larger electrode spacing, indicating that pyrite precipitation takes place away from the wells. Furthermore, a chargeability decrease is observed at later monitoring rounds in both wells, suggesting that pyrite is either passivated or re-dissolved after precipitating. These results highlight the ability of TDIP logging to monitor pyrite mineralization and have implications for understanding the fate of H2S upon subsurface storage in basaltic environments.
- 1 December 2023
- Published by Wiley
Open AccessUnderstanding the fate of H2S injected in basalts by means of time-domain induced polarization geophysical logging
To help meet emission standards, hydrogen sulfide (H2S) from geothermal production may be injected back into the subsurface, where basalt offers, in theory, the capacity to mineralize H2S into pyrite. Ensuring the viability of this pollution mitigation technology requires information on how much H2S is mineralized, at what rate and where. To date, monitoring efforts of field-scale H2S reinjection have mostly occurred via mass balance calculations, typically capturing less than 5\% of the injected fluid. While these studies, along with laboratory experiments and geochemical models, conclude effective H2S mineralization, their extrapolation to quantify mineralization and its persistence over time leads to considerable uncertainty. Here, a geophysical methodology, using time-domain induced polarization (TDIP) logging in two of the injection wells (NN3 and NN4), is developed to follow the fate of H2S re-injected at Nesjavellir geothermal site in south-west Iceland. Results show a strong chargeability increase at +40 days, corresponding to precipitation of up to 1\% in NN4 and 2\% in NN3 according to laboratory-based relationships. A uniform increase is observed along NN4, whereas it is localized below 450 in NN3. Changes are more pronounced with the larger electrode spacing, indicating that pyrite precipitation takes place away from the wells. Furthermore, a chargeability decrease is observed at later monitoring rounds in both wells, suggesting that pyrite is either passivated or re-dissolved after precipitating. These results highlight the ability of TDIP logging to monitor pyrite mineralization and have implications for understanding the fate of H2S upon subsurface storage in basaltic environments.
- Open Access
- 22 August 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (8)
Assessing Contaminant Mass Discharge Uncertainty With Application of Hydraulic Conductivities Derived From Geoelectrical Cross‐Borehole Induced Polarization and Other Methods
A new methodology was developed to support contaminant mass discharge (CMD)‐based risk assessment of groundwater contamination downgradient of point source zones. Geoelectrical cross‐borehole induced polarization (IP) data were collected at a site undergoing in situ remediation of chlorinated solvents for determining 2D hydraulic conductivity (K) distributions with an inversion model resolution of 0.15 m (vertically) x 0.50 m (horizontally) in three control planes from 10 to 20 m depth. Additionally, 18 slug tests and 31 grain size distribution analyses (GSA) from the control planes, were used for K‐estimation. The geometric means and variance of the IP, slug test, and GSA derived K‐estimates were consistent with previously studied sandy aquifers. Furthermore, the vertical variation in K between two geological settings, a sandy till and a meltwater sand formation, was clearly identified by the IP K‐estimates. The vertical variation was backed up by hydraulic profiling tool (HPT) measurements. Random realizations of CMD were simulated based on the cross‐borehole IP derived K‐values. For comparison, the CMD was also estimated with a geostatistical conditional simulation approach, using the data from slug tests and GSAs. The high IP resolution captured the small scale variations in K across the transects and led to CMD predictions with a narrow uncertainty interval, whereas slug test and GSA either under‐ or overestimated the magnitude of the areas with the highest CMD. Applying the geophysical cross‐borehole method for estimating K‐distributions in addition to traditional methods would improve CMD‐based risk assessment and evaluation of remediation performance at contaminated sites.
- 22 August 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (8)
Open AccessAssessing Contaminant Mass Discharge Uncertainty With Application of Hydraulic Conductivities Derived From Geoelectrical Cross‐Borehole Induced Polarization and Other Methods
A new methodology was developed to support contaminant mass discharge (CMD)‐based risk assessment of groundwater contamination downgradient of point source zones. Geoelectrical cross‐borehole induced polarization (IP) data were collected at a site undergoing in situ remediation of chlorinated solvents for determining 2D hydraulic conductivity (K) distributions with an inversion model resolution of 0.15 m (vertically) x 0.50 m (horizontally) in three control planes from 10 to 20 m depth. Additionally, 18 slug tests and 31 grain size distribution analyses (GSA) from the control planes, were used for K‐estimation. The geometric means and variance of the IP, slug test, and GSA derived K‐estimates were consistent with previously studied sandy aquifers. Furthermore, the vertical variation in K between two geological settings, a sandy till and a meltwater sand formation, was clearly identified by the IP K‐estimates. The vertical variation was backed up by hydraulic profiling tool (HPT) measurements. Random realizations of CMD were simulated based on the cross‐borehole IP derived K‐values. For comparison, the CMD was also estimated with a geostatistical conditional simulation approach, using the data from slug tests and GSAs. The high IP resolution captured the small scale variations in K across the transects and led to CMD predictions with a narrow uncertainty interval, whereas slug test and GSA either under‐ or overestimated the magnitude of the areas with the highest CMD. Applying the geophysical cross‐borehole method for estimating K‐distributions in addition to traditional methods would improve CMD‐based risk assessment and evaluation of remediation performance at contaminated sites.
- 21 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-10
Removal of Powerline Noise in Geophysical Datasets With a Scientific Machine-Learning Based Approach
The most common noise in geophysical data is probably the interference from powerlines. This noise manifests itself as a sinusoidal signal oscillating at the fundamental 50 Hz or 60 Hz frequency of the power grid and as harmonic components oscillating at integer multiples. Many different mitigation strategies, tailored for the specific geophysical method, have been developed to target powerline noise. One method that applies to fully sampled data is model-based subtraction, where a model of the powerline noise is fitted to the noisy data set and subsequently subtracted. In most cases, this leads to significant improvements in the signal-to-noise ratio. However, the determination of the powerline model parameters, in particular the fundamental powerline frequency, is computationally expensive, as it requires repeated solutions of a least-squares problem. We demonstrate that the powerline frequency can be directly predicted with a scientific machine-learning based approach. We work on both time domain induced polarization and surface nuclear magnetic resonance data. We use a different network for each method to trade-off prediction accuracy and prediction speed. In both cases, the prediction accuracy is fully on par with standard methods, and we obtain speed-ups by factors of 400 and 10 for the two types of data.
- 21 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-10
Removal of Powerline Noise in Geophysical Datasets With a Scientific Machine-Learning Based Approach
The most common noise in geophysical data is probably the interference from powerlines. This noise manifests itself as a sinusoidal signal oscillating at the fundamental 50 Hz or 60 Hz frequency of the power grid and as harmonic components oscillating at integer multiples. Many different mitigation strategies, tailored for the specific geophysical method, have been developed to target powerline noise. One method that applies to fully sampled data is model-based subtraction, where a model of the powerline noise is fitted to the noisy data set and subsequently subtracted. In most cases, this leads to significant improvements in the signal-to-noise ratio. However, the determination of the powerline model parameters, in particular the fundamental powerline frequency, is computationally expensive, as it requires repeated solutions of a least-squares problem. We demonstrate that the powerline frequency can be directly predicted with a scientific machine-learning based approach. We work on both time domain induced polarization and surface nuclear magnetic resonance data. We use a different network for each method to trade-off prediction accuracy and prediction speed. In both cases, the prediction accuracy is fully on par with standard methods, and we obtain speed-ups by factors of 400 and 10 for the two types of data.
- Open Access
- 12 September 2022
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 58 (9)
Quantifying Reagent Spreading by Cross‐Borehole Electrical Tomography to Assess Performance of Groundwater Remediation
In situ remediation of contaminated groundwater often relies on the installation of a treatment zone (TZ) degrading the contamination. Zero‐valent‐iron (ZVI) is a type of reagent used for this purpose. Adequate delivery of ZVI in the whole target volume is particularly challenging and requires monitoring with high spatial resolution. We present a monitoring tool for imaging the dynamic spreading of ZVI and its associated ionic cloud, using cross‐borehole time‐lapse electrical resistivity tomography (ERT). This tool works in urban areas and is particularly suitable for achieving the required spatial resolution at the scale of the target volume. Groundwater and sediment samples show a consistent spatial and temporal distribution of the remediation cloud with cross‐borehole ERT. Yet, the 2D anomalies observed with cross‐borehole ERT provide a more spatially complete and rapid image of the remediation cloud distribution than if based solely on monitoring screens. At the study site, ZVI injection leads to uneven spreading, clearly documented by cross‐borehole ERT monitoring. The benefit of hydraulic conductivity (K) mapping by cross‐borehole induced polarization (IP) to understand unexpected injection paths (upstream leakage, spreading in preferred pathways) is investigated. A 2D, IP‐based, continuous, and coherent K‐distribution is obtained that compares well with estimations by grain size analyses from the TZ. However, the IP‐based K‐field fails at predicting injection paths, suggesting the creation of pathways during the high‐pressure injection of ZVI. Cross‐borehole time‐lapse ERT is the most promising geophysical tool for performance assessment of in situ remediation involving reagents with conductivity contrast.
- 12 September 2022
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 58 (9)
Open AccessQuantifying Reagent Spreading by Cross‐Borehole Electrical Tomography to Assess Performance of Groundwater Remediation
In situ remediation of contaminated groundwater often relies on the installation of a treatment zone (TZ) degrading the contamination. Zero‐valent‐iron (ZVI) is a type of reagent used for this purpose. Adequate delivery of ZVI in the whole target volume is particularly challenging and requires monitoring with high spatial resolution. We present a monitoring tool for imaging the dynamic spreading of ZVI and its associated ionic cloud, using cross‐borehole time‐lapse electrical resistivity tomography (ERT). This tool works in urban areas and is particularly suitable for achieving the required spatial resolution at the scale of the target volume. Groundwater and sediment samples show a consistent spatial and temporal distribution of the remediation cloud with cross‐borehole ERT. Yet, the 2D anomalies observed with cross‐borehole ERT provide a more spatially complete and rapid image of the remediation cloud distribution than if based solely on monitoring screens. At the study site, ZVI injection leads to uneven spreading, clearly documented by cross‐borehole ERT monitoring. The benefit of hydraulic conductivity (K) mapping by cross‐borehole induced polarization (IP) to understand unexpected injection paths (upstream leakage, spreading in preferred pathways) is investigated. A 2D, IP‐based, continuous, and coherent K‐distribution is obtained that compares well with estimations by grain size analyses from the TZ. However, the IP‐based K‐field fails at predicting injection paths, suggesting the creation of pathways during the high‐pressure injection of ZVI. Cross‐borehole time‐lapse ERT is the most promising geophysical tool for performance assessment of in situ remediation involving reagents with conductivity contrast.