Stephan Rosenthal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Stephan Rosenthal has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Ahmet Erman Tekkaya
TU Dortmund
4 shared publications - Marlon Hahn
TU Dortmund University
3 shared publications A. Erman Tekkaya
Institute of Forming Technology and Lightweight Components (IUL), TU Dortmund University, Dortmund, Germany
2 shared publicationsGerd Witt
Institut for Product Engineering (IPE), Chair of Manufacturing Technology, University of Duisburg-Essen, Duisburg, Germany
2 shared publicationsSebastian Platt
Institut for Product Engineering (IPE), Chair of Manufacturing Technology, University of Duisburg-Essen, Duisburg, Germany
2 shared publications- Soeren Gies
Institute of Forming Technology and Lightweight Components, TU Dortmund University, Baroper Str. 303, 44227 Dortmund, Germany
2 shared publications
Latest Publications
- Open Access
- 21 February 2023
- Published by Springer Nature in International Journal of Material Forming
- Vol. 16 (2) , 1
Correction to: Deep drawability of additively manufactured sheets with a structured core
- 21 February 2023
- Published by Springer Nature in International Journal of Material Forming
- Vol. 16 (2) , 1
Open AccessCorrection to: Deep drawability of additively manufactured sheets with a structured core
- Open Access
- 14 February 2023
- Published by Springer Nature in International Journal of Material Forming
- Vol. 16 (2) , 1-15
Deep drawability of additively manufactured sheets with a structured core
The deep drawability of additively manufactured stainless steel sheets with a core structure is investigated. By fracture forming limit diagrams it is shown that the additively manufactured sheets reveal good formability. The deep drawing process is analyzed numerically and the numerical models are validated experimentally. The main failure mode is a fracture of the face sheets. No severe deformation of the core structure was encountered, leading to the fact that the parts keep their structural integrity after the deep drawing process. It is shown that the process forces can reasonably be predicted by a modified Siebel’s method. A process window diagram is derived, e.g. showing a maximum deep drawing ratio βmax = 1.4 for honeycomb structures with a relative core density of ρcore = 0.22.
- 14 February 2023
- Published by Springer Nature in International Journal of Material Forming
- Vol. 16 (2) , 1-15
Open AccessDeep drawability of additively manufactured sheets with a structured core
The deep drawability of additively manufactured stainless steel sheets with a core structure is investigated. By fracture forming limit diagrams it is shown that the additively manufactured sheets reveal good formability. The deep drawing process is analyzed numerically and the numerical models are validated experimentally. The main failure mode is a fracture of the face sheets. No severe deformation of the core structure was encountered, leading to the fact that the parts keep their structural integrity after the deep drawing process. It is shown that the process forces can reasonably be predicted by a modified Siebel’s method. A process window diagram is derived, e.g. showing a maximum deep drawing ratio βmax = 1.4 for honeycomb structures with a relative core density of ρcore = 0.22.
- 2 February 2023
- Published by Springer Nature
- p. 810-820
Potential for Stamping Scrap Reduction in Progressive Processes
- 2 February 2023
- Published by Springer Nature
- p. 810-820
Potential for Stamping Scrap Reduction in Progressive Processes
- Open Access
- 30 August 2021
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing-Green Technology
- Vol. 9 (4) , 1021-1034
Speeding up Additive Manufacturing by Means of Forming for Sheet Components with Core Structures
A new process combination route consisting of additive manufacturing (AM) with a subsequent forming operation is proposed. The process route has the opportunity to increase the efficiency of the AM process route up to 360%. Stainless steel 316L sheets with different core structures (similar to sandwich sheets) are produced by AM, characterized, and formed in a die bending operation. The bending characteristics of this novel semi-finished product can be accurately predicted in a numerical simulation. The new process route is discussed in detail and compared to conventional AM parts in terms of the production efficiency.
- 30 August 2021
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing-Green Technology
- Vol. 9 (4) , 1021-1034
Open AccessSpeeding up Additive Manufacturing by Means of Forming for Sheet Components with Core Structures
A new process combination route consisting of additive manufacturing (AM) with a subsequent forming operation is proposed. The process route has the opportunity to increase the efficiency of the AM process route up to 360%. Stainless steel 316L sheets with different core structures (similar to sandwich sheets) are produced by AM, characterized, and formed in a die bending operation. The bending characteristics of this novel semi-finished product can be accurately predicted in a numerical simulation. The new process route is discussed in detail and compared to conventional AM parts in terms of the production efficiency.
- 11 July 2021
- Published by Springer Nature
- p. 2099-2113
Combined Computed Tomography and Numerical Modeling for the Analysis of Bending of Additively Manufactured Cellular Sheets
- 11 July 2021
- Published by Springer Nature
- p. 2099-2113
Combined Computed Tomography and Numerical Modeling for the Analysis of Bending of Additively Manufactured Cellular Sheets
- Open Access
- 9 December 2020
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 4 (4) , 115
Hybrid Additive Manufacturing of Collector Coins
The objective of this paper is to present a new hybrid additive manufacturing route for fabricating collector coins with complex, intricate contoured holes. The new manufacturing route combines metal deposition by additive manufacturing with metal cutting and forming, and its application is illustrated with an example consisting of a prototype coin made from stainless steel AISI 316L. Experimentation and finite element analysis of the coin minting operation with the in-house computer program i-form show that the blanks produced by additive manufacturing and metal cutting can withstand the high compressive pressures that are attained during the embossing and impressing of lettering and other reliefs on the coin surfaces. The presentation allows concluding that hybrid additive manufacturing opens the way to the production of innovative collector coins with geometric features that are radically different from those that are currently available in the market.
- 9 December 2020
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 4 (4) , 115
Open AccessHybrid Additive Manufacturing of Collector Coins
The objective of this paper is to present a new hybrid additive manufacturing route for fabricating collector coins with complex, intricate contoured holes. The new manufacturing route combines metal deposition by additive manufacturing with metal cutting and forming, and its application is illustrated with an example consisting of a prototype coin made from stainless steel AISI 316L. Experimentation and finite element analysis of the coin minting operation with the in-house computer program i-form show that the blanks produced by additive manufacturing and metal cutting can withstand the high compressive pressures that are attained during the embossing and impressing of lettering and other reliefs on the coin surfaces. The presentation allows concluding that hybrid additive manufacturing opens the way to the production of innovative collector coins with geometric features that are radically different from those that are currently available in the market.
- Top Cited PapersOpen Access
- 31 July 2020
- Published by Springer Nature in Automotive Innovation
- Vol. 3 (3) , 195-209
Lightweight in Automotive Components by Forming Technology
Lightweight design is one of the current key drivers to reduce the energy consumption of vehicles. Design methodologies for lightweight components, strategies utilizing materials with favorable specific properties and hybrid materials are used to increase the performance of parts for automotive applications. In this paper, various forming processes to produce light parts are described. Material lightweight design is discussed, covering the manufacturing processes to produce hybrid components like fiber–metal, polymer–metal and metal–metal composites, which can be used in subsequent deep drawing or combined forming processes. Approaches to increasing the specific strength and stiffness with thermomechanical forming processes as well as the in situ control of the microstructure of such components are presented. Structure lightweight design discusses possibilities to plastically form high-strength or high-performance materials like magnesium or titanium in sheet, profile and tube forming operations. To join those materials and/or dissimilar materials, new joining by forming technologies are shown. To economically produce lightweight parts with gears or functional elements, incremental sheet-bulk metal forming is presented. As an important part property, the damage evolution during the forming operations will be discussed to enable even lighter parts through a more reliable design. New methods for predicting and tailoring the mechanical properties like strength and residual stresses will be shown. The possibilities of system lightweight design with forming technologies are presented. A combination of additive manufacturing and forming to produce highly complex parts with integrated functions will be shown. The integration of functions by a hot extrusion process for the manufacturing of shape memory alloys is presented. An in-depth understanding of the newly developed processes, methodologies and effects allows for a more accurate dimensioning of components. This facilitates a reduction in the total mass and an increasing performance of vehicle components.
- 31 July 2020
- Published by Springer Nature in Automotive Innovation
- Vol. 3 (3) , 195-209
Top Cited PapersOpen AccessLightweight in Automotive Components by Forming Technology
Lightweight design is one of the current key drivers to reduce the energy consumption of vehicles. Design methodologies for lightweight components, strategies utilizing materials with favorable specific properties and hybrid materials are used to increase the performance of parts for automotive applications. In this paper, various forming processes to produce light parts are described. Material lightweight design is discussed, covering the manufacturing processes to produce hybrid components like fiber–metal, polymer–metal and metal–metal composites, which can be used in subsequent deep drawing or combined forming processes. Approaches to increasing the specific strength and stiffness with thermomechanical forming processes as well as the in situ control of the microstructure of such components are presented. Structure lightweight design discusses possibilities to plastically form high-strength or high-performance materials like magnesium or titanium in sheet, profile and tube forming operations. To join those materials and/or dissimilar materials, new joining by forming technologies are shown. To economically produce lightweight parts with gears or functional elements, incremental sheet-bulk metal forming is presented. As an important part property, the damage evolution during the forming operations will be discussed to enable even lighter parts through a more reliable design. New methods for predicting and tailoring the mechanical properties like strength and residual stresses will be shown. The possibilities of system lightweight design with forming technologies are presented. A combination of additive manufacturing and forming to produce highly complex parts with integrated functions will be shown. The integration of functions by a hot extrusion process for the manufacturing of shape memory alloys is presented. An in-depth understanding of the newly developed processes, methodologies and effects allows for a more accurate dimensioning of components. This facilitates a reduction in the total mass and an increasing performance of vehicle components.
- 1 April 2019
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 753, 300-316
Forming properties of additively manufactured monolithic Hastelloy X sheets
- 1 April 2019
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 753, 300-316
Forming properties of additively manufactured monolithic Hastelloy X sheets