AHAli Ansari Hamedani

Ali Ansari Hamedani

*This is an algorithmically generated author record based on publicly available information.

Ali Ansari Hamedani has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Nanofibrous Interlayers with Ultrafine Decoration of Titanium Oxide to Intercept Lithium Polysulfides in Lithium–Sulfur Batteries

    by Ali Ansari Hamedani, Busra Cetiner, Begüm Yarar Kaplan, Selmiye Alkan Gürsel, Alp Yürüm

    Li–sulfur (LiS) batteries are potential alternatives to Li‐ion batteries due to the ampleness of the sulfur and their higher gravimetric energy density. However, in conventional LiS batteries, the dissolution and redox shuttling of the formed lithium polysulfide species (LiPSs) pose disadvantages regarding capacity retention. Herein, free‐standing nanofiber mats are fabricated using polyacrylonitrile (PAN) and titanium tetraisopropoxide (TTIP) to address the shuttling of LiPSs. After the subsequent heat treatment of the nanofiber mats, denoted as stabilization and carbonization, they are introduced into the LiS cells between the sulfur electrode and the separator as an interlayer to intercept the shuttling LiPSs. Material characterizations confirm an ultrafine distribution of TiO2 in the fibers and also the formation of a thin layer of SiO2 on them after carbonization. Constant‐current discharge/charge cycling shows that using each of the developed interlayers leads to higher capacity retention compared to the case without any interlayer (100th cycle discharge capacity of 695 mAh gS−1 for stabilized PAN‐TiO2 and 749 mAh gS−1 for CNF‐TiO2 compared to 495 mAh gS−1 for the cell without an interlayer). The improved cycling performance with interlayers is attributed to the adsorption and conversion of LiPSs thanks to their nanocomposite structures.


  • Open Access

    High‐Performance Lithium–Sulfur Batteries With MXene‐Transition Metal Oxide Decorated Electrospun Interlayers for Optimized Polysulfide Conversion

    by Busra Cetiner, Ali Ansari Hamedani, Bilal Iskandarani, Shungui Deng, Jakob Heier, Begum Yarar Kaplan, Selmiye Alkan Gürsel, Alp Yürüm

    Lithium‐sulfur (Li–S) batteries offer exceptional theoretical energy density, yet their practical realization remains limited by polysulfide shuttling and sluggish redox kinetics. Conventional interlayers typically mitigate only one of these bottlenecks, either improving conductivity or providing polysulfide adsorption, which proves insufficient under realistic conditions. Here, we introduce a multifunctional interlayer composed of electrospun polyvinylidene fluoride (PVDF) nanofibers embedded with MXene/transition metal oxide (TMO) hybrids and compacted via hot pressing. This design uniquely integrates MXene’s conductivity, TMO’s strong polar–polar adsorption and catalytic activity, and PVDF’s structural flexibility, producing a single architecture capable of suppressing shuttle effects, accelerating LiPS conversion, and stabilizing the electrode‐interlayer interface. Electrochemical evaluation demonstrates high discharge capacities of 1032 mAh g −1 for PVDF‐calcined MXene (P‐CM) interlayer and 931 mAh g −1 for PVDF‐MXene/SnO 2 (P‐MS) interlayer at medium sulfur loading (2–3 mg cm −2 ), with outstanding long‐term retention of 800 mAh g −1 after 100 cycles and ultralow fading rates of 0.23% and 0.18% per cycle. Strikingly, at high sulfur loadings (5–6 mg cm −2 ), both interlayers sustained similarly low decay rates (0.18% per cycle), highlighting their robustness under practical conditions. Electrochemical impedance spectroscopy revealed a > 94% reduction in polysulfide shuttle resistance, directly confirming the efficient immobilization and conversion of soluble lithium polysulfides (LiPSs). Moreover, Li   + diffusion coefficients were boosted to 9.89 × 10 −8 mg cm 2 s −1 , nearly two orders of magnitude higher than previously reported values, while postmortem X‐ray photoelectron spectrometer (XPS) identified Sn–S, Sn–O, and S–Ti–C bonding as evidence of strong chemical interactions. This work presents the first electrospun PVDF‐based interlayer integrating MXene/TMO hybrids, establishing a multifunctional strategy that concurrently resolves shuttling and redox kinetics limitations. The ability to maintain high stability at practical sulfur loadings, coupled with scalable electrospinning and hot‐pressing fabrication, underscores its potential for enabling next‐generation Li–S batteries.


  • One-pot synthesis of tin chalcogenide-reduced graphene oxide-carbon nanotube nanocomposite as anode material for lithium-ion batteries

    by Azam Abbasnezhad, Hamed Asgharzadeh, Ali Ansari Hamedani, Serap Hayat Soytas

    In this study, a ternary tin chalcogenide (TC)–reduced graphene oxide (RGO)–carbon nanotube (CNT) nanocomposite was synthesized as a lithium-ion battery (LIB) anode by a simple one-step protocol. The nanocomposite was prepared through a hydrothermal method using tin chloride as the tin precursor, thiourea as the sulfur source and reducing agent, and GO–CNT hybrid as the carbonaceous nanostructure. The structure, morphology, and phase analysis of the synthesized nanocomposite powder were investigated using Raman spectroscopy, field-emission scanning electron microscopy (FESEM), and X-ray diffraction (XRD). The results show that GO is reduced while SnS and SnS2 nanosheets along with SnO2 nanoparticles are simultaneously formed within the RGO–CNT hybrid framework throughout the hydrothermal process. During the first lithiation–delithiation process, the discharge capacity and the columbic efficiency for the ternary TC–RGO–CNT nanocomposite electrode at a current density of 50 mA g−1 are 1401 mA h g−1 and 50%, respectively. The TC–RGO–CNT electrode gives an improved capacity of 197 mA h g−1 at 500 mA g−1 while the corresponding value for the bare TC, and binary TC–CNT and TC–RGO nanocomposite electrodes was only 5, 18, and 41 mA h g−1, respectively. Meanwhile, the ternary nanocomposite anode indicates outstanding stability after 150 cycles with a reversible capacity of 100 mA h g−1 at 500 mA g−1. The excellent electrochemical performance of the ternary TC–RGO–CNT nanocomposite is ascribed to the synergistic effect of the high capacity of electrochemically-active TC nanostructures along with the large surface area, porous structure, and exceptional conductivity of the 3D RGO–CNT framework.


  • The adsorption effect of freestanding SiOx-decorated stabilized polyacrylonitrile interlayers in lithium–sulfur batteries

    by Elif Ceylan Cengiz, Ali Ansari Hamedani, Serap Hayat Soytas, Rezan Demir-Cakan

    In this work, freestanding SiOx-decorated stabilized polyacrylonitrile interlayers were used with the aim of catching polysulfides and keeping them at the cathode side.