Busra Cetiner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Busra Cetiner has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Selmiye Alkan Gürsel
Sabanci University
6 shared publications - Alp Yürüm
Materials Science and Nano Engineering Program, Sabanci University, Istanbul, Turkey
4 shared publications - Begüm Yarar Kaplan
Sabanci University Nanotechnology Research and Application Center
4 shared publications - Ali Ansari Hamedani
Sabanci University Nanotechnology Research and Application Center (SUNUM) Orta Mahalle, Üniversite Caddesi, No: 27, Orhanli, Tuzla 34956 Istanbul Türkiye
3 shared publications Alp Yurum
Sabanci University
3 shared publicationsAysel Zahidova
SOCAR Türkiye R&D and Innovation Co
2 shared publications
Latest Publications
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (50) , 2461
(Keynote) Engineering Iridium Oxide Electrocatalysts Through Transition-Metal Incorporation for PEM Water Electrolyzers
Balancing catalytic activity, stability, and noble-metal efficiency represents a fundamental challenge for oxygen evolution reaction (OER) electrocatalysts in polymer electrolyte membrane (PEM) water electrolyzers where iridium oxide (IrO₂) is widely regarded as the state-of-the-art anode catalyst owing to its outstanding stability and corrosion resistance under acidic conditions. Nevertheless, the scarcity, high cost, and durability limitations associated with Ir-based catalysts remain critical obstacles to large-scale implementation, necessitating strategies to enhance catalytic efficiency while minimizing Ir utilization. In IrO₂-based OER catalysts, the incorporation of secondary metal species is known to modify the electronic charge distribution, thereby influencing both the thermodynamic and kinetic characteristics of the reaction. Such electronic tuning, often associated with shifts in the Ir d-band center, has been shown to lower activation barriers and enhance overall OER performance1,2.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (50) , 2461
(Keynote) Engineering Iridium Oxide Electrocatalysts Through Transition-Metal Incorporation for PEM Water Electrolyzers
Balancing catalytic activity, stability, and noble-metal efficiency represents a fundamental challenge for oxygen evolution reaction (OER) electrocatalysts in polymer electrolyte membrane (PEM) water electrolyzers where iridium oxide (IrO₂) is widely regarded as the state-of-the-art anode catalyst owing to its outstanding stability and corrosion resistance under acidic conditions. Nevertheless, the scarcity, high cost, and durability limitations associated with Ir-based catalysts remain critical obstacles to large-scale implementation, necessitating strategies to enhance catalytic efficiency while minimizing Ir utilization. In IrO₂-based OER catalysts, the incorporation of secondary metal species is known to modify the electronic charge distribution, thereby influencing both the thermodynamic and kinetic characteristics of the reaction. Such electronic tuning, often associated with shifts in the Ir d-band center, has been shown to lower activation barriers and enhance overall OER performance1,2.
- Open Access
- 2 June 2026
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (2)
Advancing Li-S full cells: Integrating a freestanding interlayer and reduced TiO₂/S cathode with a pre-lithiated graphite anode
Progress in sulfur cathodes and separator interlayers has substantially curtailed polysulfide shuttling and sluggish kinetics in Li-S batteries. However, the instability of lithium metal anodes remains a major barrier to commercialization. Replacing lithium with mature lithiated graphite is attractive, but ether-based electrolytes used in Li-S cells induce Li⁺/solvent co-intercalation and rapid failure of graphite electrodes. Building optimized interlayers and sulfur cathodes, this study focuses on making graphite fully compatible with ether electrolytes (DOL/DME). By systematically adjusting the lithium-salt concentration and LiNO3 additive, we found a finely tuned compositional regime in which the graphite electrode is free from solvent co-intercalation without markedly impairing cathode kinetics. This enabled the integration of an H-TiO₂/S cathode, a thin freestanding PVDF/MS interlayer, and a lithiated graphite anode into a full cell, which delivered 1066 mAh⋅gsulfur⁻¹ at 0.1 C (N/P = 0.87). The resulting prototype demonstrates that Li-S chemistry can operate without a lithium-metal anode, offering a practical route toward safer and more commercially viable Li-S batteries.
- 2 June 2026
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (2)
Open AccessAdvancing Li-S full cells: Integrating a freestanding interlayer and reduced TiO₂/S cathode with a pre-lithiated graphite anode
Progress in sulfur cathodes and separator interlayers has substantially curtailed polysulfide shuttling and sluggish kinetics in Li-S batteries. However, the instability of lithium metal anodes remains a major barrier to commercialization. Replacing lithium with mature lithiated graphite is attractive, but ether-based electrolytes used in Li-S cells induce Li⁺/solvent co-intercalation and rapid failure of graphite electrodes. Building optimized interlayers and sulfur cathodes, this study focuses on making graphite fully compatible with ether electrolytes (DOL/DME). By systematically adjusting the lithium-salt concentration and LiNO3 additive, we found a finely tuned compositional regime in which the graphite electrode is free from solvent co-intercalation without markedly impairing cathode kinetics. This enabled the integration of an H-TiO₂/S cathode, a thin freestanding PVDF/MS interlayer, and a lithiated graphite anode into a full cell, which delivered 1066 mAh⋅gsulfur⁻¹ at 0.1 C (N/P = 0.87). The resulting prototype demonstrates that Li-S chemistry can operate without a lithium-metal anode, offering a practical route toward safer and more commercially viable Li-S batteries.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (3) , 307
Enhanced Catalytic Activity and Polysulfide Suppression via MXene-TMO Deposited Electrospun Interlayers for Lithium-Sulfur Applications
Lithium-sulfur (Li-S) batteries have emerged as one of the most promising next-generation energy storage systems due to their high theoretical energy density and the abundance and low cost of sulfur¹. Despite their potential, significant challenges, such as the lithium polysulfide (LiPS) shuttling effect, poor catalytic activity, and rapid capacity fading, have hindered their practical implementation². Addressing these issues requires advanced interlayer designs capable of suppressing LiPS diffusion while simultaneously enhancing catalytic activity. In this study, an innovative electrospun polyvinylidene fluoride (PVDF) fiber-based interlayer incorporating two different MXene-Transition Metal Oxide (MXene-TMO) composite structures in medium (2–3 mg·cm⁻²) and high (5–6 mg·cm⁻²) sulfur loading cells is presented. The electrospinning process enables the creation of a three-dimensional (3D) interconnected fibrous and porous architecture, providing efficient ion transport pathways and strong physical barriers to LiPS migration, where the PVDF structure develops polar-polar interactions due to its inherent polarity. Moreover, the addition of MXene-TMO structures embedded into the electrospun fibers improves the catalytic conversion of LiPSs. MXene nanoparticles possess high catalytic activity ability, which lowers the energy barriers and promotes the redox reactions of long-chain polysulfides to short-chain polysulfides. On the other hand, TMO structures act as mediators, chemically trapping LiPSs via polar-polar interactions and decreasing the activation energy of long-chain LiPSs³. The deposition of TMOs onto MXene particles also provides a high surface area with numerous polar sites for enhanced LiPS adsorption, immobilization, and conversion⁴. Furthermore, a hot-pressing method was applied to eliminate the gap between the interlayer and electrode during assembly, enhancing compactibility. This process reduced internal resistance and further improved capacity retention. Integration of PVDF/MXene-TMO interlayers significantly reduced capacity decay over extended cycling, improved capacity retention, and enhanced cell reversibility and stability in both sulfur-type cells. Electrochemical test results revealed that, especially for high-sulfur-loaded cells, the charge transfer resistance of polysulfide species on the positive electrode (represented by the second semicircle in the data⁵) was diminished by 94% compared to the reference cell. This suggests that LiPSs were successfully adsorbed via polar-polar interactions and the shuttling effect was mitigated. The adsorption of polysulfides by the interlayers was clearly demonstrated through adsorption tests. Initially, the polysulfide solution exhibited a dark yellowish color. However, upon introducing the PVDF/MXene-TMO-based interlayer, the solution’s color shifted to a pale yellowish-white. Quantitative analysis using UV-VIS spectroscopy revealed that the initial polysulfide concentration of 4 mM was reduced to 1.8 mM following the addition of the PVDF/MXene-TMO interlayers. Moreover, using the Randles-Sevcik equation, the influence of interlayers on the diffusion rate and catalytic conversion of polysulfides was evaluated. The diffusion rate of Li⁺ ions demonstrated a 90% increase. These findings underscore the effectiveness of both polar-polar interactions and enhanced catalytic activity in suppressing the polysulfide shuttle effect. Our findings suggest that these innovative interlayer materials present a promising solution for the development of high-performance and durable Li-S batteries. This research highlights the significant potential of combining PVDF, MXene, and MXene-TMO electrospun fibers with advanced catalytic materials as effective interlayer solutions for Li-S batteries. By leveraging the unique properties of these materials, the polysulfide shuttling effect—one of the most critical challenges in Li-S battery technology—was addressed. The results demonstrate a promising pathway toward developing long-lasting, high-performance Li-S batteries, which are crucial for advanced energy storage applications. This approach not only tackles key issues but also paves the way for the practical implementation of Li-S batteries in energy storage systems. The authors gratefully acknowledge the financial support of The Scientific and Technological Research Council of Türkiye (Grant Number: 121N816) and the Swiss National Science Foundation (Grant Number: IZJFZ2_202476). References: 1 A. Fotouhi, D. J. Auger, L. O’Neill, T. Cleaver, and S. Walus, “Lithium-sulfur battery technology readiness and applications - A review,” Energies, vol. 10, no. 12. 2017. doi: 10.3390/en10121937. 2 D. M. Brieske, A. Warnecke, and D. U. Sauer, “Modeling the volumetric expansion of the lithium-sulfur battery considering charge and discharge profiles,” Energy Storage Mater, vol. 55, 2023, doi: 10.1016/j.ensm.2022.11.053. 3 X. Geng, L. Yang, and P. Song, “Application of MXene-Based Materials for Cathode in Lithium-Sulfur Batteries,” Chemistry - A European Journal, vol. 30, no. 13. 2024. doi: 10.1002/chem.202303451. 4 Y. Chen, J. Li, X. Kong, Y. Zhang, Y. Zhang, and J. Zhao, “Enhancing Catalytic Conversion of Polysulfides by Hollow Bimetallic Oxide-Based Heterostructure Nanocages for Lithium-Sulfur Batteries,” ACS Sustain Chem Eng, vol. 9, no. 30, 2021, doi: 10.1021/acssuschemeng.1c04036. 5 S. Waluś, C. Barchasz, R. Bouchet, and F. Alloin, “Electrochemical impedance spectroscopy study of lithium–sulfur batteries: Useful technique to reveal the Li/S electrochemical mechanism,” Electrochimica Acta, Volume 359, 2020. doi: 10.1016/j.electacta.2020.136944.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (3) , 307
Enhanced Catalytic Activity and Polysulfide Suppression via MXene-TMO Deposited Electrospun Interlayers for Lithium-Sulfur Applications
Lithium-sulfur (Li-S) batteries have emerged as one of the most promising next-generation energy storage systems due to their high theoretical energy density and the abundance and low cost of sulfur¹. Despite their potential, significant challenges, such as the lithium polysulfide (LiPS) shuttling effect, poor catalytic activity, and rapid capacity fading, have hindered their practical implementation². Addressing these issues requires advanced interlayer designs capable of suppressing LiPS diffusion while simultaneously enhancing catalytic activity. In this study, an innovative electrospun polyvinylidene fluoride (PVDF) fiber-based interlayer incorporating two different MXene-Transition Metal Oxide (MXene-TMO) composite structures in medium (2–3 mg·cm⁻²) and high (5–6 mg·cm⁻²) sulfur loading cells is presented. The electrospinning process enables the creation of a three-dimensional (3D) interconnected fibrous and porous architecture, providing efficient ion transport pathways and strong physical barriers to LiPS migration, where the PVDF structure develops polar-polar interactions due to its inherent polarity. Moreover, the addition of MXene-TMO structures embedded into the electrospun fibers improves the catalytic conversion of LiPSs. MXene nanoparticles possess high catalytic activity ability, which lowers the energy barriers and promotes the redox reactions of long-chain polysulfides to short-chain polysulfides. On the other hand, TMO structures act as mediators, chemically trapping LiPSs via polar-polar interactions and decreasing the activation energy of long-chain LiPSs³. The deposition of TMOs onto MXene particles also provides a high surface area with numerous polar sites for enhanced LiPS adsorption, immobilization, and conversion⁴. Furthermore, a hot-pressing method was applied to eliminate the gap between the interlayer and electrode during assembly, enhancing compactibility. This process reduced internal resistance and further improved capacity retention. Integration of PVDF/MXene-TMO interlayers significantly reduced capacity decay over extended cycling, improved capacity retention, and enhanced cell reversibility and stability in both sulfur-type cells. Electrochemical test results revealed that, especially for high-sulfur-loaded cells, the charge transfer resistance of polysulfide species on the positive electrode (represented by the second semicircle in the data⁵) was diminished by 94% compared to the reference cell. This suggests that LiPSs were successfully adsorbed via polar-polar interactions and the shuttling effect was mitigated. The adsorption of polysulfides by the interlayers was clearly demonstrated through adsorption tests. Initially, the polysulfide solution exhibited a dark yellowish color. However, upon introducing the PVDF/MXene-TMO-based interlayer, the solution’s color shifted to a pale yellowish-white. Quantitative analysis using UV-VIS spectroscopy revealed that the initial polysulfide concentration of 4 mM was reduced to 1.8 mM following the addition of the PVDF/MXene-TMO interlayers. Moreover, using the Randles-Sevcik equation, the influence of interlayers on the diffusion rate and catalytic conversion of polysulfides was evaluated. The diffusion rate of Li⁺ ions demonstrated a 90% increase. These findings underscore the effectiveness of both polar-polar interactions and enhanced catalytic activity in suppressing the polysulfide shuttle effect. Our findings suggest that these innovative interlayer materials present a promising solution for the development of high-performance and durable Li-S batteries. This research highlights the significant potential of combining PVDF, MXene, and MXene-TMO electrospun fibers with advanced catalytic materials as effective interlayer solutions for Li-S batteries. By leveraging the unique properties of these materials, the polysulfide shuttling effect—one of the most critical challenges in Li-S battery technology—was addressed. The results demonstrate a promising pathway toward developing long-lasting, high-performance Li-S batteries, which are crucial for advanced energy storage applications. This approach not only tackles key issues but also paves the way for the practical implementation of Li-S batteries in energy storage systems. The authors gratefully acknowledge the financial support of The Scientific and Technological Research Council of Türkiye (Grant Number: 121N816) and the Swiss National Science Foundation (Grant Number: IZJFZ2_202476). References: 1 A. Fotouhi, D. J. Auger, L. O’Neill, T. Cleaver, and S. Walus, “Lithium-sulfur battery technology readiness and applications - A review,” Energies, vol. 10, no. 12. 2017. doi: 10.3390/en10121937. 2 D. M. Brieske, A. Warnecke, and D. U. Sauer, “Modeling the volumetric expansion of the lithium-sulfur battery considering charge and discharge profiles,” Energy Storage Mater, vol. 55, 2023, doi: 10.1016/j.ensm.2022.11.053. 3 X. Geng, L. Yang, and P. Song, “Application of MXene-Based Materials for Cathode in Lithium-Sulfur Batteries,” Chemistry - A European Journal, vol. 30, no. 13. 2024. doi: 10.1002/chem.202303451. 4 Y. Chen, J. Li, X. Kong, Y. Zhang, Y. Zhang, and J. Zhao, “Enhancing Catalytic Conversion of Polysulfides by Hollow Bimetallic Oxide-Based Heterostructure Nanocages for Lithium-Sulfur Batteries,” ACS Sustain Chem Eng, vol. 9, no. 30, 2021, doi: 10.1021/acssuschemeng.1c04036. 5 S. Waluś, C. Barchasz, R. Bouchet, and F. Alloin, “Electrochemical impedance spectroscopy study of lithium–sulfur batteries: Useful technique to reveal the Li/S electrochemical mechanism,” Electrochimica Acta, Volume 359, 2020. doi: 10.1016/j.electacta.2020.136944.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (55) , 2645
(Invited) Advanced Graphene-Supported Pt Catalysts for ORR in PEM Fuel Cells and Next-Generation Transition Metal Incorporated Iridium Oxides for OER in PEM Electrolyzers
The development of cost-effective and durable catalysts for polymer electrolyte membrane (PEM) fuel cells and electrolyzers is paramount for advancing clean energy technologies. This work addresses the critical challenges of catalytic activity, stability, and cost, focusing on optimizing the oxygen reduction reaction (ORR) in PEM fuel cells and the oxygen evolution reaction (OER) in PEM electrolyzers. The distinct reaction conditions of OER and ORR necessitate significantly different catalyst properties. The most effective and durable catalysts for cathodic ORR are typically platinum-based metals) and anodic OER catalysts are primarily composed of metal oxides. Graphene has been employed as a superior catalyst support due to its high surface area, conductivity, and chemical stability. The deposition of platinum (Pt) nanoparticles on graphene layers results in a heterogeneous catalyst system that significantly reduces Pt consumption while enhancing catalytic activity via the high charge mobility of the graphene support1. In the present work, platinum (Pt) nanoparticles (2–3 nm) synthesized using graphene nanoplatelets, reduced graphene oxide (rGO), functionalized graphenes, and graphene-based hybrids demonstrated enhanced catalytic activity, reduced Pt consumption and superior fuel cell performance1,2. This study also focuses on photocatalytic deposition, in which transition metal ions, as the hole scavengers and surface modifiers of partially reduced graphene oxide, PRGO, were utilized to photoreduce Pt4+ and Pt electrocatalysts’ structural and electrochemical characteristics revealed that utilizing the cobalt-based hole scavenger caused a dominant growth phase of Pt particles at preferred positions on PRGO, with metallic states and improved electrocatalytic activities 3,4 . Furthermore, we employed novel CeO₂-based additives such as CeO₂ nanorods and CeO₂/nitrogen-doped rGO composites to enhance ORR activity and PEM fuel cell performance5. For PEM electrolyzers, iridium oxide (IrO₂) is promising for OER anode catalysts, due to its superior stability and corrosion resistance, however, the high cost and limited lifespan of pure IrO₂ drive research into mixed oxides incorporating noble metal oxides into more stable, non-precious matrices. The introduction of metal dopants into IrO2 significantly alters the distribution of electronic charge, which affects both the thermodynamic and kinetic characteristics of the OER. For example, doping IrO2 with Ni or Co reduces activation energies, increases the exothermic behavior of the reactions, and boosts the overall catalytic performancewhich is linked to the downshift of d-band center caused by Ni doping6. Our study focused on transition metal-incorporated IrO₂ catalysts synthesized via the sol-gel method. In the present work, incorporation of Mn and other transition metals reduced catalyst usage by up to 20% while enhancing catalytic performance under acidic OER conditions. The use of anodized TiO₂ nanotube-coated titanium mesh as a high-surface-area support further improved the stability and activity of these catalysts. Electrochemical evaluations showed significant improvements in catalytic performance, with Mn-doped IrO₂. Our study demonstrates the potential of advanced graphene-supported catalysts and transition metal-incorporated IrO₂ to deliver significant performance improvements for PEM fuel cells and electrolyzers. By integrating innovative catalyst architectures and electrode designs, these advancements pave the way for scalable, high-performance energy conversion technologies critical for sustainable hydrogen production and utilization. References Quesnel, E., Roux, F., Emieux, F., Faucherand, P., Kymakis, E., Volonakis, G., Giustino, F., Martín-García, B., Moreels, I., Alkan Gürsel, S., et al. "Graphene-based technologies for energy applications, challenges and perspectives." 2D Materials, 2(3), 030204 (2015). Kaplan, B. Y., Haghmoradi, N., Biçer, E., Merino, C., Alkan Gürsel, S. "High-performance electrocatalysts supported on graphene-based hybrids for polymer electrolyte membrane fuel cells." International Journal of Hydrogen Energy, 43(52), 23221–23230 (2018). Abdolhosseinzadeh, S., Sadighikia, S., Alkan Gürsel, S. "Scalable synthesis of sub-nanosized platinum-reduced graphene oxide composite by an ultra-precise photocatalytic method." ACS Sustainable Chemistry & Engineering, 6(4), 3773–3782 (2018). Haghmoradi, N., Sarı, Z. T., Kırlıoğlu, A. C., Kaplan, B. Y., Dedeoğlu, B., Zahedimaram, P., Abdolhosseinzadeh, S., Alkan Gürsel, S. "Co²⁺, Fe²⁺, and Ni²⁺: Modifiers for photocatalytic deposition of highly active Pt on graphene-based supports." ACS Applied Energy Materials, 5(11), 13939–13951 (2022). Taşdemir, A., İskandarani, B., Yürüm, A., Alkan Gürsel, S., Yarar Kaplan, B. "CeO₂ nanorod decorated NrGO additives for boosting PEMFC performance." International Journal of Hydrogen Energy, 46(63), 32250–32260 (2021). Camacho-Forero, L. E., Godínez-Salomón, F., Ramos-Sánchez, G., Rhodes, C. P., Balbuena, P. B. "Molecular insights into OER mechanisms in IrO₂ catalysts." Journal of Catalysis, 408, 64–80 (2022). Acknowledgments This work was supported by the European Union's Horizon 2020 research and innovation program (Graphene Flagship, Grant No. 696656) and SOCAR Türkiye R&D and Innovation Co.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (55) , 2645
(Invited) Advanced Graphene-Supported Pt Catalysts for ORR in PEM Fuel Cells and Next-Generation Transition Metal Incorporated Iridium Oxides for OER in PEM Electrolyzers
The development of cost-effective and durable catalysts for polymer electrolyte membrane (PEM) fuel cells and electrolyzers is paramount for advancing clean energy technologies. This work addresses the critical challenges of catalytic activity, stability, and cost, focusing on optimizing the oxygen reduction reaction (ORR) in PEM fuel cells and the oxygen evolution reaction (OER) in PEM electrolyzers. The distinct reaction conditions of OER and ORR necessitate significantly different catalyst properties. The most effective and durable catalysts for cathodic ORR are typically platinum-based metals) and anodic OER catalysts are primarily composed of metal oxides. Graphene has been employed as a superior catalyst support due to its high surface area, conductivity, and chemical stability. The deposition of platinum (Pt) nanoparticles on graphene layers results in a heterogeneous catalyst system that significantly reduces Pt consumption while enhancing catalytic activity via the high charge mobility of the graphene support1. In the present work, platinum (Pt) nanoparticles (2–3 nm) synthesized using graphene nanoplatelets, reduced graphene oxide (rGO), functionalized graphenes, and graphene-based hybrids demonstrated enhanced catalytic activity, reduced Pt consumption and superior fuel cell performance1,2. This study also focuses on photocatalytic deposition, in which transition metal ions, as the hole scavengers and surface modifiers of partially reduced graphene oxide, PRGO, were utilized to photoreduce Pt4+ and Pt electrocatalysts’ structural and electrochemical characteristics revealed that utilizing the cobalt-based hole scavenger caused a dominant growth phase of Pt particles at preferred positions on PRGO, with metallic states and improved electrocatalytic activities 3,4 . Furthermore, we employed novel CeO₂-based additives such as CeO₂ nanorods and CeO₂/nitrogen-doped rGO composites to enhance ORR activity and PEM fuel cell performance5. For PEM electrolyzers, iridium oxide (IrO₂) is promising for OER anode catalysts, due to its superior stability and corrosion resistance, however, the high cost and limited lifespan of pure IrO₂ drive research into mixed oxides incorporating noble metal oxides into more stable, non-precious matrices. The introduction of metal dopants into IrO2 significantly alters the distribution of electronic charge, which affects both the thermodynamic and kinetic characteristics of the OER. For example, doping IrO2 with Ni or Co reduces activation energies, increases the exothermic behavior of the reactions, and boosts the overall catalytic performancewhich is linked to the downshift of d-band center caused by Ni doping6. Our study focused on transition metal-incorporated IrO₂ catalysts synthesized via the sol-gel method. In the present work, incorporation of Mn and other transition metals reduced catalyst usage by up to 20% while enhancing catalytic performance under acidic OER conditions. The use of anodized TiO₂ nanotube-coated titanium mesh as a high-surface-area support further improved the stability and activity of these catalysts. Electrochemical evaluations showed significant improvements in catalytic performance, with Mn-doped IrO₂. Our study demonstrates the potential of advanced graphene-supported catalysts and transition metal-incorporated IrO₂ to deliver significant performance improvements for PEM fuel cells and electrolyzers. By integrating innovative catalyst architectures and electrode designs, these advancements pave the way for scalable, high-performance energy conversion technologies critical for sustainable hydrogen production and utilization. References Quesnel, E., Roux, F., Emieux, F., Faucherand, P., Kymakis, E., Volonakis, G., Giustino, F., Martín-García, B., Moreels, I., Alkan Gürsel, S., et al. "Graphene-based technologies for energy applications, challenges and perspectives." 2D Materials, 2(3), 030204 (2015). Kaplan, B. Y., Haghmoradi, N., Biçer, E., Merino, C., Alkan Gürsel, S. "High-performance electrocatalysts supported on graphene-based hybrids for polymer electrolyte membrane fuel cells." International Journal of Hydrogen Energy, 43(52), 23221–23230 (2018). Abdolhosseinzadeh, S., Sadighikia, S., Alkan Gürsel, S. "Scalable synthesis of sub-nanosized platinum-reduced graphene oxide composite by an ultra-precise photocatalytic method." ACS Sustainable Chemistry & Engineering, 6(4), 3773–3782 (2018). Haghmoradi, N., Sarı, Z. T., Kırlıoğlu, A. C., Kaplan, B. Y., Dedeoğlu, B., Zahedimaram, P., Abdolhosseinzadeh, S., Alkan Gürsel, S. "Co²⁺, Fe²⁺, and Ni²⁺: Modifiers for photocatalytic deposition of highly active Pt on graphene-based supports." ACS Applied Energy Materials, 5(11), 13939–13951 (2022). Taşdemir, A., İskandarani, B., Yürüm, A., Alkan Gürsel, S., Yarar Kaplan, B. "CeO₂ nanorod decorated NrGO additives for boosting PEMFC performance." International Journal of Hydrogen Energy, 46(63), 32250–32260 (2021). Camacho-Forero, L. E., Godínez-Salomón, F., Ramos-Sánchez, G., Rhodes, C. P., Balbuena, P. B. "Molecular insights into OER mechanisms in IrO₂ catalysts." Journal of Catalysis, 408, 64–80 (2022). Acknowledgments This work was supported by the European Union's Horizon 2020 research and innovation program (Graphene Flagship, Grant No. 696656) and SOCAR Türkiye R&D and Innovation Co.
- 30 June 2025
- Published by Wiley in Chemphyschem
- Vol. 26 (16) , e2401136
Nanofibrous Interlayers with Ultrafine Decoration of Titanium Oxide to Intercept Lithium Polysulfides in Lithium–Sulfur Batteries
Li–sulfur (LiS) batteries are potential alternatives to Li‐ion batteries due to the ampleness of the sulfur and their higher gravimetric energy density. However, in conventional LiS batteries, the dissolution and redox shuttling of the formed lithium polysulfide species (LiPSs) pose disadvantages regarding capacity retention. Herein, free‐standing nanofiber mats are fabricated using polyacrylonitrile (PAN) and titanium tetraisopropoxide (TTIP) to address the shuttling of LiPSs. After the subsequent heat treatment of the nanofiber mats, denoted as stabilization and carbonization, they are introduced into the LiS cells between the sulfur electrode and the separator as an interlayer to intercept the shuttling LiPSs. Material characterizations confirm an ultrafine distribution of TiO2 in the fibers and also the formation of a thin layer of SiO2 on them after carbonization. Constant‐current discharge/charge cycling shows that using each of the developed interlayers leads to higher capacity retention compared to the case without any interlayer (100th cycle discharge capacity of 695 mAh gS−1 for stabilized PAN‐TiO2 and 749 mAh gS−1 for CNF‐TiO2 compared to 495 mAh gS−1 for the cell without an interlayer). The improved cycling performance with interlayers is attributed to the adsorption and conversion of LiPSs thanks to their nanocomposite structures.
- 30 June 2025
- Published by Wiley in Chemphyschem
- Vol. 26 (16) , e2401136
Nanofibrous Interlayers with Ultrafine Decoration of Titanium Oxide to Intercept Lithium Polysulfides in Lithium–Sulfur Batteries
Li–sulfur (LiS) batteries are potential alternatives to Li‐ion batteries due to the ampleness of the sulfur and their higher gravimetric energy density. However, in conventional LiS batteries, the dissolution and redox shuttling of the formed lithium polysulfide species (LiPSs) pose disadvantages regarding capacity retention. Herein, free‐standing nanofiber mats are fabricated using polyacrylonitrile (PAN) and titanium tetraisopropoxide (TTIP) to address the shuttling of LiPSs. After the subsequent heat treatment of the nanofiber mats, denoted as stabilization and carbonization, they are introduced into the LiS cells between the sulfur electrode and the separator as an interlayer to intercept the shuttling LiPSs. Material characterizations confirm an ultrafine distribution of TiO2 in the fibers and also the formation of a thin layer of SiO2 on them after carbonization. Constant‐current discharge/charge cycling shows that using each of the developed interlayers leads to higher capacity retention compared to the case without any interlayer (100th cycle discharge capacity of 695 mAh gS−1 for stabilized PAN‐TiO2 and 749 mAh gS−1 for CNF‐TiO2 compared to 495 mAh gS−1 for the cell without an interlayer). The improved cycling performance with interlayers is attributed to the adsorption and conversion of LiPSs thanks to their nanocomposite structures.
- Open Access
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
High‐Performance Lithium–Sulfur Batteries With MXene‐Transition Metal Oxide Decorated Electrospun Interlayers for Optimized Polysulfide Conversion
Lithium‐sulfur (Li–S) batteries offer exceptional theoretical energy density, yet their practical realization remains limited by polysulfide shuttling and sluggish redox kinetics. Conventional interlayers typically mitigate only one of these bottlenecks, either improving conductivity or providing polysulfide adsorption, which proves insufficient under realistic conditions. Here, we introduce a multifunctional interlayer composed of electrospun polyvinylidene fluoride (PVDF) nanofibers embedded with MXene/transition metal oxide (TMO) hybrids and compacted via hot pressing. This design uniquely integrates MXene’s conductivity, TMO’s strong polar–polar adsorption and catalytic activity, and PVDF’s structural flexibility, producing a single architecture capable of suppressing shuttle effects, accelerating LiPS conversion, and stabilizing the electrode‐interlayer interface. Electrochemical evaluation demonstrates high discharge capacities of 1032 mAh g −1 for PVDF‐calcined MXene (P‐CM) interlayer and 931 mAh g −1 for PVDF‐MXene/SnO 2 (P‐MS) interlayer at medium sulfur loading (2–3 mg cm −2 ), with outstanding long‐term retention of 800 mAh g −1 after 100 cycles and ultralow fading rates of 0.23% and 0.18% per cycle. Strikingly, at high sulfur loadings (5–6 mg cm −2 ), both interlayers sustained similarly low decay rates (0.18% per cycle), highlighting their robustness under practical conditions. Electrochemical impedance spectroscopy revealed a > 94% reduction in polysulfide shuttle resistance, directly confirming the efficient immobilization and conversion of soluble lithium polysulfides (LiPSs). Moreover, Li + diffusion coefficients were boosted to 9.89 × 10 −8 mg cm 2 s −1 , nearly two orders of magnitude higher than previously reported values, while postmortem X‐ray photoelectron spectrometer (XPS) identified Sn–S, Sn–O, and S–Ti–C bonding as evidence of strong chemical interactions. This work presents the first electrospun PVDF‐based interlayer integrating MXene/TMO hybrids, establishing a multifunctional strategy that concurrently resolves shuttling and redox kinetics limitations. The ability to maintain high stability at practical sulfur loadings, coupled with scalable electrospinning and hot‐pressing fabrication, underscores its potential for enabling next‐generation Li–S batteries.
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Open AccessHigh‐Performance Lithium–Sulfur Batteries With MXene‐Transition Metal Oxide Decorated Electrospun Interlayers for Optimized Polysulfide Conversion
Lithium‐sulfur (Li–S) batteries offer exceptional theoretical energy density, yet their practical realization remains limited by polysulfide shuttling and sluggish redox kinetics. Conventional interlayers typically mitigate only one of these bottlenecks, either improving conductivity or providing polysulfide adsorption, which proves insufficient under realistic conditions. Here, we introduce a multifunctional interlayer composed of electrospun polyvinylidene fluoride (PVDF) nanofibers embedded with MXene/transition metal oxide (TMO) hybrids and compacted via hot pressing. This design uniquely integrates MXene’s conductivity, TMO’s strong polar–polar adsorption and catalytic activity, and PVDF’s structural flexibility, producing a single architecture capable of suppressing shuttle effects, accelerating LiPS conversion, and stabilizing the electrode‐interlayer interface. Electrochemical evaluation demonstrates high discharge capacities of 1032 mAh g −1 for PVDF‐calcined MXene (P‐CM) interlayer and 931 mAh g −1 for PVDF‐MXene/SnO 2 (P‐MS) interlayer at medium sulfur loading (2–3 mg cm −2 ), with outstanding long‐term retention of 800 mAh g −1 after 100 cycles and ultralow fading rates of 0.23% and 0.18% per cycle. Strikingly, at high sulfur loadings (5–6 mg cm −2 ), both interlayers sustained similarly low decay rates (0.18% per cycle), highlighting their robustness under practical conditions. Electrochemical impedance spectroscopy revealed a > 94% reduction in polysulfide shuttle resistance, directly confirming the efficient immobilization and conversion of soluble lithium polysulfides (LiPSs). Moreover, Li + diffusion coefficients were boosted to 9.89 × 10 −8 mg cm 2 s −1 , nearly two orders of magnitude higher than previously reported values, while postmortem X‐ray photoelectron spectrometer (XPS) identified Sn–S, Sn–O, and S–Ti–C bonding as evidence of strong chemical interactions. This work presents the first electrospun PVDF‐based interlayer integrating MXene/TMO hybrids, establishing a multifunctional strategy that concurrently resolves shuttling and redox kinetics limitations. The ability to maintain high stability at practical sulfur loadings, coupled with scalable electrospinning and hot‐pressing fabrication, underscores its potential for enabling next‐generation Li–S batteries.