MBM. T Biletskiy

M. T Biletskiy

*This is an algorithmically generated author record based on publicly available information.

M. T Biletskiy has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Improved techniques for exploration of groundwater deposits for conditions of rural areas of the Mangystau Peninsula

    by M. T Biletskiy, B. T Ratov, V. L Khomenko, A. Ye Yesturliyev, Z. Sh Makhitova

    Purpose. Development of an innovative methodology for exploring groundwater deposits for the conditions of rural areas of the Mangystau Peninsula, which will allow finding sources of groundwater with acceptable mineralization with a minimum number of drilled wells. Methodology. The assigned tasks were solved using a comprehensive research method, which includes a review and synthesis of literary sources; patent market research; study of geological and hydrogeological conditions of the work area; critical analysis of existing methods for exploration of groundwater deposits; studying and summarizing previously conducted exploration work in the area and developing recommendations for improving exploration methods. Findings. The reasons for the insufficient use of groundwater reserves on the Mangystau Peninsula have been established. A highly effective method for exploring groundwater deposits has been developed, taking into account the specific features of the Mangystau Peninsula – vast sparsely populated areas and the chaotic location of aquifers with acceptable mineralization. Reducing the number of wells drilled is achieved by searching and identifying the boundaries of the aquifer using successive cycles with a moving center, which allows you to systematically explore the area and find the best aquifers. Originality. For the first time, a methodology for exploring groundwater deposits has been proposed, the main provisions of which are as follows: exploration wells are drilled with a small diameter, and only wells that have uncovered horizons with acceptable mineralization are subject to expansion; wells are drilled using a combined grid, combining the capabilities of radial and regular grids; the centers of the first cycle of the exploration grid are existing water intakes containing water with acceptable mineralization; from such centers, drilling is carried out along a radial grid of six wells; when a horizon with acceptable mineralization is discovered, the discovered well becomes the center of the second cycle of a radial grid of six wells, at least three of which have already been drilled in the previous cycle. Further exploration continues with subsequent cycles with the goal of constructing wells with acceptable flow rate and mineralization. Practical value. The implementation of the developed methodology is of great practical importance for the further development of oil and gas production, industrial production and agriculture of the Mangystau Peninsula, as well as social significance for meeting the needs of the growing population of the region for high-quality water for drinking and household water supply. The use of the developed methodology makes it possible to reduce the number of useless wells, minimizing exploration costs.


  • The choice of optimal methods for the development of water wells in the conditions of the Tonirekshin field (Kazakhstan)

    by M. T Biletskiy, B. T Ratov, V. L Khomenko, A. R Borash, S. K Muratova

    New+Mining +https://doi.org/10.33271/nvngu/2024-1 +/jdownloads/pdf/2024/1/01_2024_contents-en-GB.pdf


  • NEW DRILLING METHOD, DEVELOPMENT OF HYDROGEOLOGICAL AND OIL WELLS WITH IMPLOSIVE EFFECT

    by SATBAYEV UNIVERSITY, B.T. Ratov, M.T. Biletskiy, A.T. Makyzhanova, A.R. Borash, YESSENOV UNIVERSITY, S.K. Muratova

    The peculiarities of the collimation zones of the productive formation are taken into account when rotary drilling of wells using drilling mud. A brief analysis of the most common and fundamentally different decollatation procedures, such as washing wells with water, pumping and gelation, is presented. A very effective and promising method of decollatation using the implosion effect has a special influence. A detailed example of a well-known device is given with an analysis of the features of its application, as well as significant disadvantages in the form of complexity and functionality, high cost. A fundamentally different new device was developed and proposed, free from all the disadvantages of the opposite device for which the invention was requested. This eliminates the use of pumping and compressor pipes and their sealing, as well as a sealant for the neck. There is also no need for a compressor and surface wiring with numerous valves. Replacing the intake valve valve with a disc valve eliminates the possibility of closing the intake valve as a result of the influx of reservoir fluid with a high content of collating materials caused by the implosion effect. The design and functioning features of the proposed device and its individual elements are taken into account both when creating a single, and with any number of repeated implosive effects. The generation limits necessary for the explosion effect of the liquid-filled space were mathematically analyzed to prevent the case from crumpling under the hydrostatic pressure of the solution remaining in the storage space. An example of the dependence of the permissible length of empty space on the thickness of the housing column and, in particular, on the thickness of the walls is illustrated using a computer program.

  • Optimization of technological parameters of airlift operation when drilling water wells

    by B. R Borash, M. T Biletskiy, V. L Khomenko, Ye. A Koroviaka, B. T Ratov

    Purpose. Development of a methodology for optimizing the technological parameters of the airlift operation, based on the analysis of the pressure balance in the annulus and in the drill string that occurs during drilling. Methodology. The tasks were solved by a complex research method, which includes a review and generalization of literary and patent sources, analytical studies on existing methods for optimizing the technological parameters of drilling with reverse circulation using an airlift. Findings. It has been established that in the study on the airlift circulation method during rotary drilling with reverse circulation, an important role is played by the analysis of the pressure balance arising in the course of drilling in the annulus and in the drill string. It takes into account both hydrostatic pressures and pressure losses for pumping water and water-air mixture. A technique has been developed for assessing the effect of rate of penetration on circulation parameters. Originality. For the first time, it has been shown that the analysis of the pressure balance makes it possible to establish, with a given accuracy, the average effective values of the output parameters: the density of the water-air mixture, its upward flow rate, and the air flow rate at a given velocity of the upward flow of water as it approaches the mixer. Practical value. The proposed technique makes it possible to establish the dependence of the values of the output parameters on the depth of the well, as well as the required compressor performance to provide a given drilling fluid flow rate.


  • EXPERIENCE IN THE IMPLEMENTATION OF WATER-GAS EXPOSURE TECHNOLOGY IN THE FIELDS

    by M.T. Biletskiy, B.T. Ratov, A.R. Borash, S.K. Muratova

    The Implosion method consists in an instantaneous connection of the opened by drilling zone of formation pressure with the zone of low pressure, causing an intense inflow of the formation liquid, removal of the near well bore zone colmatation by the drilling mud, and significant rising of the well production. The method is widely used in the formation testing instruments, however its employment for well completing is restrained by complexity of existing appliances and procedures. Analysis of the existing appliances, made it possible to develop a new appliance for creation the implosion effect in the course of the water producing well completing, which is devoid of all the defects of the existing technologies. In the proposed device, a low pressure area is created above a baffle included in the casing string with a spring-loaded disk-type inlet valve. The implosion effect is achieved by opening the inlet valve under the action of the weight of the bailer lowered on it. To repeat the effect, the inlet valve is closed by removing the weight of the bailer from its spring, after which the formation water that has entered the space above the valve is scooped out by the bailer, and then the procedure for opening the valve is repeated. After achieving a stable inflow of formation water and its clarification, the work is stopped and by hitting the bailer against the baffle, the pins are cut off and the baffle with the valve is knocked into the sump. The analysis of existing devices made it possible to create a new device for using the implosion effect in the development of water wells, devoid of all the shortcomings of known technologies.

  • Modeling of drilling water supply wells with airlift reverse flush agent circulation

    by M. T Biletskiy, B. T Ratov, A. K Sudakov, D. А Sudakova, B. R Borash

    Purpose. Determination of the influence of mining and geological conditions of drilling hydrogeological wells with backwash on the technological parameters of the airlift method of cleaning it from drilled rock and the properties of the ascending flow of aerated washing liquids. Methodology. The tasks were solved by a complex research method, including analysis and generalization of literary and patent sources, analytical, experimental studies, using computer and mathematical modeling methods. Findings. An algorithm for the functioning of the airlift circulation method during rotary drilling with backwash has been developed. The algorithm takes into account: hydrostatic and hydrodynamic pressures, and the effect on them of the rate of drilling of the well; the effect of the sludge content in the upstream. The effective values of the airflow rate, the density of the water-air mixture and the velocity of its upward flow are established. A method for estimating the effective values of technological parameters and their changes in the upward flow of the mixture is proposed. A model has been developed that allows analyzing the dependences of the air flow rate, the density of the mixture and the rate of its ascent on the parameters of the well being drilled. The model is applied to typical drilling conditions of a large-diameter water intake well at the Samskoye groundwater deposit on the Mangystau peninsula. Originality. A mathematical algorithm has been developed for the functioning of the airlift backwash method when drilling large-diameter water intake wells. The method is based on the analysis of the pressure balance in the descending and ascending flows of the washing agent. For the case of backwash, a formula for estimating the content of sludge in it was obtained. A method has been developed for determining the average effective density of the mixture in terms of the height of the well, as well as the air content in it. Based on the average effective values, a method is proposed for estimating changes in the density of the mixture, its flow rate and velocity along the upward flow. Practical value. The proposed algorithm is the basis of a computer model that allows you to determine the dependences of the values of the density of the mixture, the content of air and sludge in it and the rate of ascent, from the depth of the well, the depth of the mixer descent, the speed of deepening, the specified velocity of the upward fluid flow, as well as the diameters of the well and drill pipes. Specific modeling results have been obtained in relation to the Samskoye groundwater deposit of the Mangystau peninsula.