JWJian Wang

Jian Wang

*This is an algorithmically generated author record based on publicly available information.

Jian Wang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Crystallization of Fe-W-B Amorphous Powder Prepared by Gas Atomization

    by Shuwang Ma, Zheng Lv, Jian Wang, Haicheng Wang, Jian Yang, Zhimin Yang, Jingli Li, Zhiyong Xue

    In this work, the effects of master alloy composition and annealing temperature on the amorphization and crystallization behavior of Fe-W-B powders prepared by gas atomization using compacts of Fe, W and B powder mixture were systematically studied. The results show that only the master alloy with high content of W (19.9 at.%) and B (13.6 at.%) of the six alloys studied yielded amorphous Fe-W-B powders. The alloying elements W and B are believed to have a glass-forming ability (GFA)-enhancing effect, which together with the high cooling rate of gas atomization leads to the formation of amorphization. The difference in the average particle size of 3–10 μm for the six atomized powders indicates that the master alloys with different W and B contents have different superheat and melt viscosity at the same atomization temperature. The Fe-W-B amorphous powder is structurally stable within 600 °C and crystallizes from the edge of the particles when the temperature increases to 700 °C, and its crystalline precipitates include α-Fe, FeWB and Fe7W6. The nuclear shielding tests and Monte Carlo N Particle Transport Code (MCNP) calculated results revealed that the Fe-W-B amorphous powder has a much better shielding performance for γ-rays and neutrons than that of iron. This work provides an efficient strategy for fabricating Fe-W-B amorphous powder with promising nuclear shielding potential and sheds light on the crystallization behaviors of this alloy.


  • Open Access

    Numerical Analysis and Experimental Studies on the Residual Stress of W/2024Al Composites

    by Guosong Zhang, Changhui Mao, Jian Wang, Ning Fan, Tiantian Guo

    W/2024Al composites can be used for radiation shielding with desirable mechanical properties such as high strength, excellent corrosion resistance, and low density. The quench-induced residual stresses in W/2024Al composites were studied by experimental measurements and numerical analysis using ABAQUS software. Due to the accurate calculation of heat transfer coefficients and the established constitutive equation for description of the variation of yield stress at elevated temperature with different strain rates, the prediction of residual stresses in as-quenched composite blocks achieved by finite element method (FEM) is reliable. Moreover, X-ray diffraction and crack-compliance method were carried out to measure the stresses that developed at the surface and interior of the composites to validate the simulation results. Quenching residual stresses of composite blocks were investigated by taking the influence of quenching medium temperature into consideration. In addition, a comparative study on residual stress magnitudes of as-quenched 2024Al and W/2024Al composites was conducted, and the results show that stress magnitudes of W/2024Al composites are lower than that of 2024Al due to lower thermal gradients during the quenching process.


  • Open Access

    Interfacial Microstructure in W/2024Al Composite and Inhibition of W-Al Direct Reaction by CeO2 Doping: Formation and Crystallization of Al-Ce-Cu-W Amorphous Layers

    by Zheng Lv, Changhui Mao, Jian Wang, Qiushi Liang, Shuwang Ma, Zhimin Yang, Jian Yang, Yang Li

    In this work, interfacial microstructure in W/2024Al composite and inhibition of the W-Al direct reaction by CeO2 doping were investigated. The composites were prepared through powder sintering, and after preparation the composites were treated by annealing at 823 K. For the prepared W/2024Al composite, a multi-phase thin layer composed of WAl12 and WAl5 compounds were formed at the interface due to the W-Al direct reaction. While doping CeO2 in the composite, Al-Ce-Cu-W amorphous substituting of W-Al compounds were formed at the interfacial reaction layer. In an annealed state, the composite with CeO2 doping shows a significant inhibitory effect on W-Al compounds, which was attributed to the crystallized layer that evolved from Al-Ce-Cu-W amorphous as an interfacial obstacle. The crystallization product for Al-Ce-Cu-W amorphous layer was identified as bcc-structure Al-Ce-Cu-W phase without any binary/ternary Ce-containing phases. Therefore, by doping CeO2 in W/2024Al composite, W-Al direct reaction was markedly inhibited during both preparation and annealing.