MBMuhammed Hilmi Buyukcavus

Muhammed Hilmi Buyukcavus

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Muhammed Hilmi Buyukcavus has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dentoalveolar Transverse Changes in Adolescents Treated with Fixed Appliances or Clear Aligners: A Retrospective Comparative Study

    by Ömer Faruk Sari, Muhammed Hilmi Buyukcavus

    Background: Dentoalveolar transverse constriction is frequently encountered during orthodontic treatment in adolescents. Although both fixed appliances and clear aligners can produce transverse dental arch changes, comparative evidence regarding their expansion patterns in growing patients remains limited. This study aimed to compare dentoalveolar transverse changes associated with two fixed treatment groups and two clear aligner systems in an adolescent population. Methods: This retrospective, non-randomized comparative study included 85 adolescents treated without extractions using conventional MBT fixed appliances (n = 22), Damon Q passive self-ligating appliances (n = 19), Invisalign (n = 21), or ClearCorrect (n = 23). Pretreatment (T0) and post-treatment (T1) digital dental models obtained using a 3Shape TRIOS intraoral scanner were evaluated for maxillary and mandibular transverse arch dimensions, projected palatal area, and maxillary first-molar crown inclination. Intergroup differences in treatment-related changes were compared among the four treatment groups. Results: Significant increases in maxillary transverse dimensions were observed after treatment in all four groups. The greatest mean increases at several maxillary levels were observed in the Damon Q group, including intercanine width (3.66 ± 1.34 mm) and first-molar width (3.69 ± 1.70 mm). In the ClearCorrect group, the mean increases were 3.12 ± 1.90 mm for intercanine width and 2.46 ± 1.42 mm for first-molar width. Projected palatal area increased in all groups, with the greatest mean increase observed with Damon Q (115.16 ± 29.70 mm2). Exploratory assessment of maxillary first-molar clinical crown inclination showed comparatively smaller changes in the ClearCorrect group than in the other treatment groups. Conclusions: All four treatment groups demonstrated increases in dentoalveolar transverse dimensions in this adolescent sample, although the magnitude and pattern of the observed changes differed among groups. Greater transverse increases at several maxillary levels were observed in the Damon Q group, whereas comparatively smaller changes in posterior crown inclination were observed in the ClearCorrect group. Because skeletal maturation was not directly assessed and an untreated control group was unavailable, these findings represent comparative changes observed during treatment and cannot distinguish appliance-related effects from physiological growth or other treatment-related factors.

  • Open Access

    Effect of high irradiance and short exposure times on the shear bond strength of metal and ceramic brackets

    by Elif Albayrak, Gulben Colak, Muhittin Ugurlu, Muhammed Hilmi Buyukcavus

    Orthodontic brackets are bonded to the tooth surface using adhesive systems, and the quality of this bonding plays a critical role in the success of orthod

  • Open Access

    Fractal Analysis-Based Comparison of Mandibular Bone Remodeling in Clear Aligner and Fixed Orthodontic Therapies

    by Ömer Faruk Sari, Muhammed Hilmi Büyükçavuş, Elif Albayrak, Burak İncebeyaz

    Background: To quantitatively compare treatment-related changes in mandibular trabecular bone between patients undergoing clear aligner therapy (CAT) and fixed orthodontic treatment (FOT) by means of fractal dimension analysis of panoramic radiographs. Methods: This retrospective investigation evaluated 76 patients who underwent orthodontic treatment with either clear aligner therapy (CAT; n = 34) or fixed orthodontic treatment (FOT; n = 42). Fractal dimension analysis was performed on panoramic radiographs obtained before treatment (T0) and after treatment completion (T1). Fractal dimension (FD) values were calculated for the mandibular molar, angulus, and condylar regions using ImageJ software based on the box-counting algorithm. Changes in FD were compared within and between groups using appropriate statistical tests, with statistical significance established at p < 0.05. Results: No statistically significant differences were observed between CAT and FOT groups regarding FD changes in the mandibular molar and angulus regions at T0 or T1 (p > 0.05). Within-group comparisons also revealed no significant FD changes in these regions following treatment in either group. In the condylar region, although FD values demonstrated a tendency toward change after treatment, intra-group differences were not statistically significant (p > 0.05). However, inter-group comparison revealed a statistically significant difference between CAT and FOT groups in condylar FD values (p ≤ 0.05), without evidence of destructive bone remodeling. Conclusions: CAT and FOT induce comparable adaptive responses in mandibular trabecular bone structure. FA findings suggest that both treatment modalities induce comparable adaptive remodeling patterns in mandibular trabecular bone without radiographic evidence of destructive bone changes, supporting the view that CAT could be considered a comparable alternative to FOT with respect to mandibular trabecular bone remodeling when appropriate patient selection and controlled force application are ensured.

  • Open Access

    Comparison of contemporary cephalometric methods for different malocclusions

    by Elif Albayrak, Ömer Faruk Sarı, Muhammed Hilmi Buyukcavus

    Aim: This study aimed to evaluate the reliability of two widely used web-based cephalometric analysis programs, WebCeph and Nemoceph, in comparison with the conventional manual method. Materials and Methods: A total of 150 lateral cephalometric radiographs from patients with Class I, II, and III malocclusions were analyzed. Eighteen cephalometric parameters were measured by two researchers using manual, WebCeph, and Nemoceph methods. Intra- and inter-method reliability was assessed using Intragroup Correlation Coefficient (ICC), paired t-tests, ANOVA, and post-hoc analyses. Results: High correlation was observed among the three methods for skeletal and dental measurements. However, soft tissue measurements showed lower consistency across methods. Conclusion: There were no clinically significant differences between manual and digital methods. WebCeph and Nemoceph provide reliable alternatives to traditional cephalometric analysis and offer notable advantages in terms of time and clinical efficiency.

  • Open Access

    Biomechanical analysis of skeletal open bite treatment methods: a comparative finite element study

    by Ömer Faruk Sari, Muhammed Hi̇lMi̇ Buyukcavus

    Background/aim: The biomechanical effects of zygomatic anchorage plates, vertical chin-caps, and occipital headgear on dentofacial structures in patients with skeletal anterior open bite malocclusion were compared using three-dimensional finite element analysis. Materials and methods: Three-dimensional finite element models were constructed based on computed tomography data obtained from a patient with skeletal anterior open bite. Simulation models representing zygomatic anchorage-supported intrusion, vertical chin-cap, and occipital headgear were generated under fixed orthodontic conditions. In each scenario, a unilateral force of 200 g (1.96 N) was applied along clinically relevant force vectors. Stress distributions in craniofacial bones, sutural structures, teeth, roots, and temporomandibular joint components, as well as displacement patterns of the teeth and roots, were evaluated. Von Mises stress was used to assess craniofacial and dental structures, whereas minimum principal stress was used to evaluate sutural regions. Results: The highest von Mises stress within craniofacial structures was observed in the posterior maxilla in the zygomatic anchorage plate scenario, followed by the vertical chin-cap and occipital headgear scenarios. Across all models, compressive stresses in sutural structures were predominantly concentrated in the zygomaticomaxillary suture, with the greatest magnitude observed in the zygomatic anchorage model. Dental and root stress analyses revealed peak von Mises stress at the mesiobuccal root of the maxillary first molar, particularly in the zygomatic anchorage scenario. The greatest tooth and root displacements along the vertical axis, indicative of intrusion, were also observed in this model. Condylar stress was primarily localized in the superior region of the condyle, with higher peak values observed in the vertical chin-cap simulation. Conclusion: Within the limitations of finite element analysis, zygomatic anchorage-supported intrusion demonstrated greater predicted posterior maxillary intrusion and higher localized stress concentrations than vertical chin-cap and occipital headgear approaches. These findings indicate distinct biomechanical profiles among the appliances, which should be considered when selecting treatment strategies for skeletal anterior open bite.

  • A 5-Year Clinical Management of the Surgery-First Approach in Severe Class III Malocclusion Treatment

    by Muhammed Hilmi Buyukcavus, Elif Albayrak, Yavuz Findik, Ufuk Gokkaya, Tayfun Yazici

    The surgery-first approach is a modern protocol that eliminates the preoperative orthodontic phase in dentofacial anomalies requiring orthognathic surgery, thereby optimizing treatment duration and accelerating aesthetic outcomes. This case report presents the treatment and 5-year follow-up of a 25-year-old female patient with a severe skeletal class III anomaly, managed using the surgery-first approach. The patient presented to our clinic with complaints of a concave facial profile and prominent mandibular prognathism. Intraoral examination revealed an angle class III molar and canine relationship, while cephalometric analysis demonstrated a severe skeletal class III anomaly (ANB: −12.26 degrees, Wits: −19.29 mm). Given the patient’s esthetic-driven concerns and the prediction of a stable final occlusion based on surgical setup analysis, the surgery-first approach was selected as the treatment modality. Following 9 months of postoperative orthodontic treatment, a skeletal and dental class I relationship, along with ideal overjet and overbite values, were achieved. Radiographic measurements at the 5-year follow-up confirmed the stability of the results, with no evidence of relapse. These findings demonstrate that, in appropriately selected cases, the surgery-first approach is not only effective in significantly reducing overall treatment time, but also provides predictable, long-term stable outcomes while enhancing patient satisfaction.


  • Open Access

    Evaluation of the Effects of Different Orthognathic Surgery Approaches on Mandibular Bone Structure Using Fractal Analysis

    by Ömer Faruk Sari, Elif Albayrak, Muhammed Hilmi Büyükçavuş, Yavuz Fındık, Burak Incebeyaz

    Background: In orthognathic surgery planning, two main approaches are commonly used: the conventional orthodontic–surgical (COS) approach and the surgery-first (SF) protocol. The aim of this study was to comparatively evaluate trabecular bone changes in the mandibular condylar, angular, and molar regions following COS and SF protocols using fractal analysis (FA). Methods: A total of 40 individuals (21 females, 19 males) who underwent bilateral sagittal split ramus osteotomy and Le Fort I osteotomy were included in the study. Patients were divided into COS and SF groups. Trabecular changes in the mandibular osteotomy line, condylar, and angular regions were evaluated on panoramic radiographs using FA, and fractal dimension values were calculated using the box-counting method. Results: No statistically significant differences were found between the groups in terms of baseline and post-treatment FA values in the molar and angular regions (p > 0.05). In contrast, a statistically significant difference was observed between the groups in the condylar region (p ≤ 0.05). The total treatment duration was significantly shorter in the SF group (p < 0.05). Conclusions: FA findings reveal that COS and SF protocols show similar effects in terms of mandibular bone healing, but the surgery-first approach is preferable due to its clinical advantages.

  • Three-dimensional soft tissue evaluation following different maxillary protraction in Class III patient

    by Muhammed Hilmi Buyukcavus, Elif Albayrak, Burak Kale

    Introduction: This study aimed to comparatively evaluate the effects of three different expansion methods [rapid palatal expansion (RPE), modified alternate rapid maxillary expansion and constriction (Alt-RAMEC), and skeletal anchorage (SA)] combined with maxillary protraction (MP) on the soft tissue profile using 3D stereophotogrammetry. Methods: A total of 51 patients aged between 8 and 12 years with Class III malocclusion who were in the growth and development period were included in the study. The patients were divided into three groups according to the expansion technique applied. Pre- and post-treatment soft tissue changes were analyzed using 3D stereophotogrammetric images. Results: Soft tissue measurements revealed significant changes across all groups. Post-treatment volumetric analysis showed significant increases in midface, nasal, and upper lip volumes, alongside reductions in lower lip and chin volumes across all protocols (P < .01). The SA group achieved the highest significant increases in midface (2754 ± 246 mm3), nasal (1156 ± 143 mm3), and upper lip volumes (611 ± 82 mm3) compared with the RPE and Alt-RAMEC groups (P < .01). While alar base width increase was most significant in the RPE group (P < .001), nasal tip protrusion and the greatest decrease in upper lip length and angle were most pronounced in the SA group (P < .05). Conclusions: SA-supported MP offers the potential to more effectively control soft tissue aesthetics by minimizing undesirable dental and vertical skeletal side effects. This method is superior to other traditional approaches in providing predictable and aesthetically pleasing soft tissue changes.

  • Surgical Corticotomy-Assisted Orthodontics in the Management of Bimaxillary Prognathism

    by Ömer Faruk Sari, Muhammed Hilmi Buyukcavus, Yavuz Findik

    Objectives: The aim of this case report is to present the effectiveness of corticotomy-assisted orthodontic camouflage treatment in an adult patient who refused orthognathic surgery, focusing on the management of mandibular protrusion and the clinical outcomes achieved. Case: A 24-year-old male with skeletal Class III malocclusion, mandibular protrusion, anterior crossbite, and diastemas refused orthognathic surgery. A localized corticotomy with bone grafting was performed in the mandibular anterior region before active treatment. Fixed appliances with a 0.022″ MBT system were bonded, and sequential NiTi and stainless steel archwires were used. Temporary anchorage devices (TADs) and elastomeric chains facilitated controlled anterior retraction, while an occlusal composite ramp prevented traumatic contacts. Results: Corticotomy-induced regional acceleratory phenomenon (RAP) facilitated efficient anterior retraction, minimized risks of dehiscence and root resorption, and shortened treatment duration. Post treatment records demonstrated improved sagittal and vertical relationships, closure of diastemas, correction of crossbite, and significant enhancement of facial esthetics. A fixed lingual retainer was bonded in the mandibular arch to maintain stability during the retention phase. Conclusion: Corticotomy-assisted orthodontics provided a safe and efficient alternative to surgery for mandibular protrusion, enabling effective anterior retraction and favorable esthetic outcomes in a shorter treatment period.