Ömer Faruk Sari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ömer Faruk Sari has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Elif Albayrak
Department of Orthodontics, Faculty of Dentistry, Süleyman Demirel University, Isparta, Turkey
5 shared publications - Muhammed Hilmi Buyukcavus
Department of Orthodontics, Faculty of Dentistry, Antalya Bilim University, Antalya, Turkey
5 shared publications - Burak İnCebeyaz
Department of Oral and Maxillofacial Radiology, Faculty of Dentistry, Ankara Medipol University, 06050 Ankara, Turkey
2 shared publications - Ahmet Yagci
Department of Orthodontics, Faculty of Dentistry, Erciyes University, Kayseri, Turkey
1 shared publication Ali Bilgili
1 shared publication- Alpkürşad Koyuncu
Department of Orthodontics, Faculty of Dentistry, Nigde Omer Halisdemir University, Nigde, Türkiye
1 shared publication
Latest Publications
- Open Access
Dentoalveolar Transverse Changes in Adolescents Treated with Fixed Appliances or Clear Aligners: A Retrospective Comparative Study
Background: Dentoalveolar transverse constriction is frequently encountered during orthodontic treatment in adolescents. Although both fixed appliances and clear aligners can produce transverse dental arch changes, comparative evidence regarding their expansion patterns in growing patients remains limited. This study aimed to compare dentoalveolar transverse changes associated with two fixed treatment groups and two clear aligner systems in an adolescent population. Methods: This retrospective, non-randomized comparative study included 85 adolescents treated without extractions using conventional MBT fixed appliances (n = 22), Damon Q passive self-ligating appliances (n = 19), Invisalign (n = 21), or ClearCorrect (n = 23). Pretreatment (T0) and post-treatment (T1) digital dental models obtained using a 3Shape TRIOS intraoral scanner were evaluated for maxillary and mandibular transverse arch dimensions, projected palatal area, and maxillary first-molar crown inclination. Intergroup differences in treatment-related changes were compared among the four treatment groups. Results: Significant increases in maxillary transverse dimensions were observed after treatment in all four groups. The greatest mean increases at several maxillary levels were observed in the Damon Q group, including intercanine width (3.66 ± 1.34 mm) and first-molar width (3.69 ± 1.70 mm). In the ClearCorrect group, the mean increases were 3.12 ± 1.90 mm for intercanine width and 2.46 ± 1.42 mm for first-molar width. Projected palatal area increased in all groups, with the greatest mean increase observed with Damon Q (115.16 ± 29.70 mm2). Exploratory assessment of maxillary first-molar clinical crown inclination showed comparatively smaller changes in the ClearCorrect group than in the other treatment groups. Conclusions: All four treatment groups demonstrated increases in dentoalveolar transverse dimensions in this adolescent sample, although the magnitude and pattern of the observed changes differed among groups. Greater transverse increases at several maxillary levels were observed in the Damon Q group, whereas comparatively smaller changes in posterior crown inclination were observed in the ClearCorrect group. Because skeletal maturation was not directly assessed and an untreated control group was unavailable, these findings represent comparative changes observed during treatment and cannot distinguish appliance-related effects from physiological growth or other treatment-related factors.
Open AccessDentoalveolar Transverse Changes in Adolescents Treated with Fixed Appliances or Clear Aligners: A Retrospective Comparative Study
Background: Dentoalveolar transverse constriction is frequently encountered during orthodontic treatment in adolescents. Although both fixed appliances and clear aligners can produce transverse dental arch changes, comparative evidence regarding their expansion patterns in growing patients remains limited. This study aimed to compare dentoalveolar transverse changes associated with two fixed treatment groups and two clear aligner systems in an adolescent population. Methods: This retrospective, non-randomized comparative study included 85 adolescents treated without extractions using conventional MBT fixed appliances (n = 22), Damon Q passive self-ligating appliances (n = 19), Invisalign (n = 21), or ClearCorrect (n = 23). Pretreatment (T0) and post-treatment (T1) digital dental models obtained using a 3Shape TRIOS intraoral scanner were evaluated for maxillary and mandibular transverse arch dimensions, projected palatal area, and maxillary first-molar crown inclination. Intergroup differences in treatment-related changes were compared among the four treatment groups. Results: Significant increases in maxillary transverse dimensions were observed after treatment in all four groups. The greatest mean increases at several maxillary levels were observed in the Damon Q group, including intercanine width (3.66 ± 1.34 mm) and first-molar width (3.69 ± 1.70 mm). In the ClearCorrect group, the mean increases were 3.12 ± 1.90 mm for intercanine width and 2.46 ± 1.42 mm for first-molar width. Projected palatal area increased in all groups, with the greatest mean increase observed with Damon Q (115.16 ± 29.70 mm2). Exploratory assessment of maxillary first-molar clinical crown inclination showed comparatively smaller changes in the ClearCorrect group than in the other treatment groups. Conclusions: All four treatment groups demonstrated increases in dentoalveolar transverse dimensions in this adolescent sample, although the magnitude and pattern of the observed changes differed among groups. Greater transverse increases at several maxillary levels were observed in the Damon Q group, whereas comparatively smaller changes in posterior crown inclination were observed in the ClearCorrect group. Because skeletal maturation was not directly assessed and an untreated control group was unavailable, these findings represent comparative changes observed during treatment and cannot distinguish appliance-related effects from physiological growth or other treatment-related factors.
- 18 August 2026
- Published by Wolters Kluwer Health in Journal of Craniofacial Surgery
The Barcelona Line as a Sagittal Soft Tissue Reference in Orthodontic Diagnosis and Treatment Planning: A Validation Study
Objectives: The Barcelona Line (BL) has recently been introduced as a soft tissue-oriented reference for evaluating sagittal incisor position. This study aimed to assess the relationship between BL and skeletal, dental, and soft tissue parameters across different malocclusion classes and to evaluate its clinical applicability in orthodontic diagnosis. Materials and Methods: This retrospective cross-sectional study included pretreatment lateral cephalometric radiographs of 312 adult individuals (mean age: 23.6 y) with class I, II, and III malocclusions. Skeletal (SNA, ANB, and Wits), dental (U1/NA), and soft-tissue (upper lip to E-line and S-line, nasolabial angle) parameters were analyzed. The distance between the upper incisor and the BL (U1-BL) was measured. Intergroup comparisons were performed using one-way ANOVA with Tukey post hoc tests. Correlation and linear regression analyses were conducted to evaluate associations between BL and other variables. Results: BL values showed statistically significant differences according to both sex and malocclusion type ( P 0.05). Regression analysis demonstrated limited explanatory power of the model ( R 2 =0.161, P =0.073). Conclusions: The Barcelona Line is associated with sagittal skeletal relationships and soft tissue profile characteristics; however, its predictive capacity is limited. BL may serve as a complementary clinical reference for evaluating upper incisor position in relation to facial aesthetics, particularly when used alongside established soft tissue analyses, rather than as a standalone diagnostic parameter. Clinical Relevance: BL may assist clinicians in assessing incisor positioning within the soft-tissue profile and support decision-making for aesthetic treatment planning, especially in borderline cases.
- 18 August 2026
- Published by Wolters Kluwer Health in Journal of Craniofacial Surgery
The Barcelona Line as a Sagittal Soft Tissue Reference in Orthodontic Diagnosis and Treatment Planning: A Validation Study
Objectives: The Barcelona Line (BL) has recently been introduced as a soft tissue-oriented reference for evaluating sagittal incisor position. This study aimed to assess the relationship between BL and skeletal, dental, and soft tissue parameters across different malocclusion classes and to evaluate its clinical applicability in orthodontic diagnosis. Materials and Methods: This retrospective cross-sectional study included pretreatment lateral cephalometric radiographs of 312 adult individuals (mean age: 23.6 y) with class I, II, and III malocclusions. Skeletal (SNA, ANB, and Wits), dental (U1/NA), and soft-tissue (upper lip to E-line and S-line, nasolabial angle) parameters were analyzed. The distance between the upper incisor and the BL (U1-BL) was measured. Intergroup comparisons were performed using one-way ANOVA with Tukey post hoc tests. Correlation and linear regression analyses were conducted to evaluate associations between BL and other variables. Results: BL values showed statistically significant differences according to both sex and malocclusion type ( P 0.05). Regression analysis demonstrated limited explanatory power of the model ( R 2 =0.161, P =0.073). Conclusions: The Barcelona Line is associated with sagittal skeletal relationships and soft tissue profile characteristics; however, its predictive capacity is limited. BL may serve as a complementary clinical reference for evaluating upper incisor position in relation to facial aesthetics, particularly when used alongside established soft tissue analyses, rather than as a standalone diagnostic parameter. Clinical Relevance: BL may assist clinicians in assessing incisor positioning within the soft-tissue profile and support decision-making for aesthetic treatment planning, especially in borderline cases.
- Open Access
- 16 July 2026
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 15 (14) , 5586
Fractal Analysis-Based Comparison of Mandibular Bone Remodeling in Clear Aligner and Fixed Orthodontic Therapies
Background: To quantitatively compare treatment-related changes in mandibular trabecular bone between patients undergoing clear aligner therapy (CAT) and fixed orthodontic treatment (FOT) by means of fractal dimension analysis of panoramic radiographs. Methods: This retrospective investigation evaluated 76 patients who underwent orthodontic treatment with either clear aligner therapy (CAT; n = 34) or fixed orthodontic treatment (FOT; n = 42). Fractal dimension analysis was performed on panoramic radiographs obtained before treatment (T0) and after treatment completion (T1). Fractal dimension (FD) values were calculated for the mandibular molar, angulus, and condylar regions using ImageJ software based on the box-counting algorithm. Changes in FD were compared within and between groups using appropriate statistical tests, with statistical significance established at p < 0.05. Results: No statistically significant differences were observed between CAT and FOT groups regarding FD changes in the mandibular molar and angulus regions at T0 or T1 (p > 0.05). Within-group comparisons also revealed no significant FD changes in these regions following treatment in either group. In the condylar region, although FD values demonstrated a tendency toward change after treatment, intra-group differences were not statistically significant (p > 0.05). However, inter-group comparison revealed a statistically significant difference between CAT and FOT groups in condylar FD values (p ≤ 0.05), without evidence of destructive bone remodeling. Conclusions: CAT and FOT induce comparable adaptive responses in mandibular trabecular bone structure. FA findings suggest that both treatment modalities induce comparable adaptive remodeling patterns in mandibular trabecular bone without radiographic evidence of destructive bone changes, supporting the view that CAT could be considered a comparable alternative to FOT with respect to mandibular trabecular bone remodeling when appropriate patient selection and controlled force application are ensured.
- 16 July 2026
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 15 (14) , 5586
Open AccessFractal Analysis-Based Comparison of Mandibular Bone Remodeling in Clear Aligner and Fixed Orthodontic Therapies
Background: To quantitatively compare treatment-related changes in mandibular trabecular bone between patients undergoing clear aligner therapy (CAT) and fixed orthodontic treatment (FOT) by means of fractal dimension analysis of panoramic radiographs. Methods: This retrospective investigation evaluated 76 patients who underwent orthodontic treatment with either clear aligner therapy (CAT; n = 34) or fixed orthodontic treatment (FOT; n = 42). Fractal dimension analysis was performed on panoramic radiographs obtained before treatment (T0) and after treatment completion (T1). Fractal dimension (FD) values were calculated for the mandibular molar, angulus, and condylar regions using ImageJ software based on the box-counting algorithm. Changes in FD were compared within and between groups using appropriate statistical tests, with statistical significance established at p < 0.05. Results: No statistically significant differences were observed between CAT and FOT groups regarding FD changes in the mandibular molar and angulus regions at T0 or T1 (p > 0.05). Within-group comparisons also revealed no significant FD changes in these regions following treatment in either group. In the condylar region, although FD values demonstrated a tendency toward change after treatment, intra-group differences were not statistically significant (p > 0.05). However, inter-group comparison revealed a statistically significant difference between CAT and FOT groups in condylar FD values (p ≤ 0.05), without evidence of destructive bone remodeling. Conclusions: CAT and FOT induce comparable adaptive responses in mandibular trabecular bone structure. FA findings suggest that both treatment modalities induce comparable adaptive remodeling patterns in mandibular trabecular bone without radiographic evidence of destructive bone changes, supporting the view that CAT could be considered a comparable alternative to FOT with respect to mandibular trabecular bone remodeling when appropriate patient selection and controlled force application are ensured.
- Open Access
- 23 April 2026
- Published by Adiyaman University in Adıyaman Üniversitesi Sağlık Bilimleri Dergisi
- Vol. 12 (1) , 10-18
Comparison of contemporary cephalometric methods for different malocclusions
Aim: This study aimed to evaluate the reliability of two widely used web-based cephalometric analysis programs, WebCeph and Nemoceph, in comparison with the conventional manual method. Materials and Methods: A total of 150 lateral cephalometric radiographs from patients with Class I, II, and III malocclusions were analyzed. Eighteen cephalometric parameters were measured by two researchers using manual, WebCeph, and Nemoceph methods. Intra- and inter-method reliability was assessed using Intragroup Correlation Coefficient (ICC), paired t-tests, ANOVA, and post-hoc analyses. Results: High correlation was observed among the three methods for skeletal and dental measurements. However, soft tissue measurements showed lower consistency across methods. Conclusion: There were no clinically significant differences between manual and digital methods. WebCeph and Nemoceph provide reliable alternatives to traditional cephalometric analysis and offer notable advantages in terms of time and clinical efficiency.
- 23 April 2026
- Published by Adiyaman University in Adıyaman Üniversitesi Sağlık Bilimleri Dergisi
- Vol. 12 (1) , 10-18
Open AccessComparison of contemporary cephalometric methods for different malocclusions
Aim: This study aimed to evaluate the reliability of two widely used web-based cephalometric analysis programs, WebCeph and Nemoceph, in comparison with the conventional manual method. Materials and Methods: A total of 150 lateral cephalometric radiographs from patients with Class I, II, and III malocclusions were analyzed. Eighteen cephalometric parameters were measured by two researchers using manual, WebCeph, and Nemoceph methods. Intra- and inter-method reliability was assessed using Intragroup Correlation Coefficient (ICC), paired t-tests, ANOVA, and post-hoc analyses. Results: High correlation was observed among the three methods for skeletal and dental measurements. However, soft tissue measurements showed lower consistency across methods. Conclusion: There were no clinically significant differences between manual and digital methods. WebCeph and Nemoceph provide reliable alternatives to traditional cephalometric analysis and offer notable advantages in terms of time and clinical efficiency.
- Open Access
- 14 April 2026
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF MEDICAL SCIENCES
- Vol. 56 (2) , 585-596
Biomechanical analysis of skeletal open bite treatment methods: a comparative finite element study
Background/aim: The biomechanical effects of zygomatic anchorage plates, vertical chin-caps, and occipital headgear on dentofacial structures in patients with skeletal anterior open bite malocclusion were compared using three-dimensional finite element analysis. Materials and methods: Three-dimensional finite element models were constructed based on computed tomography data obtained from a patient with skeletal anterior open bite. Simulation models representing zygomatic anchorage-supported intrusion, vertical chin-cap, and occipital headgear were generated under fixed orthodontic conditions. In each scenario, a unilateral force of 200 g (1.96 N) was applied along clinically relevant force vectors. Stress distributions in craniofacial bones, sutural structures, teeth, roots, and temporomandibular joint components, as well as displacement patterns of the teeth and roots, were evaluated. Von Mises stress was used to assess craniofacial and dental structures, whereas minimum principal stress was used to evaluate sutural regions. Results: The highest von Mises stress within craniofacial structures was observed in the posterior maxilla in the zygomatic anchorage plate scenario, followed by the vertical chin-cap and occipital headgear scenarios. Across all models, compressive stresses in sutural structures were predominantly concentrated in the zygomaticomaxillary suture, with the greatest magnitude observed in the zygomatic anchorage model. Dental and root stress analyses revealed peak von Mises stress at the mesiobuccal root of the maxillary first molar, particularly in the zygomatic anchorage scenario. The greatest tooth and root displacements along the vertical axis, indicative of intrusion, were also observed in this model. Condylar stress was primarily localized in the superior region of the condyle, with higher peak values observed in the vertical chin-cap simulation. Conclusion: Within the limitations of finite element analysis, zygomatic anchorage-supported intrusion demonstrated greater predicted posterior maxillary intrusion and higher localized stress concentrations than vertical chin-cap and occipital headgear approaches. These findings indicate distinct biomechanical profiles among the appliances, which should be considered when selecting treatment strategies for skeletal anterior open bite.
- 14 April 2026
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF MEDICAL SCIENCES
- Vol. 56 (2) , 585-596
Open AccessBiomechanical analysis of skeletal open bite treatment methods: a comparative finite element study
Background/aim: The biomechanical effects of zygomatic anchorage plates, vertical chin-caps, and occipital headgear on dentofacial structures in patients with skeletal anterior open bite malocclusion were compared using three-dimensional finite element analysis. Materials and methods: Three-dimensional finite element models were constructed based on computed tomography data obtained from a patient with skeletal anterior open bite. Simulation models representing zygomatic anchorage-supported intrusion, vertical chin-cap, and occipital headgear were generated under fixed orthodontic conditions. In each scenario, a unilateral force of 200 g (1.96 N) was applied along clinically relevant force vectors. Stress distributions in craniofacial bones, sutural structures, teeth, roots, and temporomandibular joint components, as well as displacement patterns of the teeth and roots, were evaluated. Von Mises stress was used to assess craniofacial and dental structures, whereas minimum principal stress was used to evaluate sutural regions. Results: The highest von Mises stress within craniofacial structures was observed in the posterior maxilla in the zygomatic anchorage plate scenario, followed by the vertical chin-cap and occipital headgear scenarios. Across all models, compressive stresses in sutural structures were predominantly concentrated in the zygomaticomaxillary suture, with the greatest magnitude observed in the zygomatic anchorage model. Dental and root stress analyses revealed peak von Mises stress at the mesiobuccal root of the maxillary first molar, particularly in the zygomatic anchorage scenario. The greatest tooth and root displacements along the vertical axis, indicative of intrusion, were also observed in this model. Condylar stress was primarily localized in the superior region of the condyle, with higher peak values observed in the vertical chin-cap simulation. Conclusion: Within the limitations of finite element analysis, zygomatic anchorage-supported intrusion demonstrated greater predicted posterior maxillary intrusion and higher localized stress concentrations than vertical chin-cap and occipital headgear approaches. These findings indicate distinct biomechanical profiles among the appliances, which should be considered when selecting treatment strategies for skeletal anterior open bite.
- Open Access
- 23 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (6) , 3076
Evaluation of the Effects of Different Orthognathic Surgery Approaches on Mandibular Bone Structure Using Fractal Analysis
Background: In orthognathic surgery planning, two main approaches are commonly used: the conventional orthodontic–surgical (COS) approach and the surgery-first (SF) protocol. The aim of this study was to comparatively evaluate trabecular bone changes in the mandibular condylar, angular, and molar regions following COS and SF protocols using fractal analysis (FA). Methods: A total of 40 individuals (21 females, 19 males) who underwent bilateral sagittal split ramus osteotomy and Le Fort I osteotomy were included in the study. Patients were divided into COS and SF groups. Trabecular changes in the mandibular osteotomy line, condylar, and angular regions were evaluated on panoramic radiographs using FA, and fractal dimension values were calculated using the box-counting method. Results: No statistically significant differences were found between the groups in terms of baseline and post-treatment FA values in the molar and angular regions (p > 0.05). In contrast, a statistically significant difference was observed between the groups in the condylar region (p ≤ 0.05). The total treatment duration was significantly shorter in the SF group (p < 0.05). Conclusions: FA findings reveal that COS and SF protocols show similar effects in terms of mandibular bone healing, but the surgery-first approach is preferable due to its clinical advantages.
- 23 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (6) , 3076
Open AccessEvaluation of the Effects of Different Orthognathic Surgery Approaches on Mandibular Bone Structure Using Fractal Analysis
Background: In orthognathic surgery planning, two main approaches are commonly used: the conventional orthodontic–surgical (COS) approach and the surgery-first (SF) protocol. The aim of this study was to comparatively evaluate trabecular bone changes in the mandibular condylar, angular, and molar regions following COS and SF protocols using fractal analysis (FA). Methods: A total of 40 individuals (21 females, 19 males) who underwent bilateral sagittal split ramus osteotomy and Le Fort I osteotomy were included in the study. Patients were divided into COS and SF groups. Trabecular changes in the mandibular osteotomy line, condylar, and angular regions were evaluated on panoramic radiographs using FA, and fractal dimension values were calculated using the box-counting method. Results: No statistically significant differences were found between the groups in terms of baseline and post-treatment FA values in the molar and angular regions (p > 0.05). In contrast, a statistically significant difference was observed between the groups in the condylar region (p ≤ 0.05). The total treatment duration was significantly shorter in the SF group (p < 0.05). Conclusions: FA findings reveal that COS and SF protocols show similar effects in terms of mandibular bone healing, but the surgery-first approach is preferable due to its clinical advantages.
- Open Access
- 29 December 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (3) , 457-460
Evaluation of the Effects of Different Orthodontic Treatment Methods on Halitosis
Background: Halitosis is a common oral health problem that negatively affects individuals' social relationships and quality of life. Orthodontic appliances may increase halitosis by increasing plaque retention and altering the oral microbiome. The aim of this study is to compare the level of halitosis and oral health-related quality of life in individuals undergoing fixed orthodontic treatment, clear aligner treatment and a control group. Methods: This study included a total of 42 systemically healthy, non-smoking individuals (14 in each group). Fixed orthodontic treatment, clear aligner treatment, and a control group were evaluated. At baseline, all participants underwent periodontal treatment and received standard oral hygiene instruction. Clinical parameters, halitosis and quality of life were measured. Results: In the fixed orthodontic treatment group, full-mouth plaque score, tongue coating index, halitosis, and OHIP-14 scores were significantly higher compared to the clear aligner treatment group and control groups (p
- 29 December 2025
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 12 (3) , 457-460
Open AccessEvaluation of the Effects of Different Orthodontic Treatment Methods on Halitosis
Background: Halitosis is a common oral health problem that negatively affects individuals' social relationships and quality of life. Orthodontic appliances may increase halitosis by increasing plaque retention and altering the oral microbiome. The aim of this study is to compare the level of halitosis and oral health-related quality of life in individuals undergoing fixed orthodontic treatment, clear aligner treatment and a control group. Methods: This study included a total of 42 systemically healthy, non-smoking individuals (14 in each group). Fixed orthodontic treatment, clear aligner treatment, and a control group were evaluated. At baseline, all participants underwent periodontal treatment and received standard oral hygiene instruction. Clinical parameters, halitosis and quality of life were measured. Results: In the fixed orthodontic treatment group, full-mouth plaque score, tongue coating index, halitosis, and OHIP-14 scores were significantly higher compared to the clear aligner treatment group and control groups (p
- Open Access
- 4 November 2025
- Published by Academician Publishing
Güncel Ortodonti Çalışmaları VI (AYBAK 2025 Güz)
- 4 November 2025
- Published by Academician Publishing
Open AccessGüncel Ortodonti Çalışmaları VI (AYBAK 2025 Güz)
- Open Access
- 4 November 2025
- Published by Academician Publishing
- p. 163-174
Ortodontide Yapay Zekâ Uygulamaları
- 4 November 2025
- Published by Academician Publishing
- p. 163-174
Open AccessOrtodontide Yapay Zekâ Uygulamaları
- Open Access
- 20 October 2025
- Published by Özgür Yayınları
- p. 105-116
Ortodontide Biyomekanik Yenilikler: Mini-İmplantlar
Ortodontik tedavilerde ankraj kontrolü, öngörülebilir ve stabil sonuçlar için kritik öneme sahiptir. Geleneksel yöntemlerin sınırlılıkları, geçici ankraj aygıtlarını (TAD) modern ortodontide vazgeçilmez hale getirmiştir. Mini-implantlar; kolay yerleştirilebilirlik, düşük maliyet, yüksek başarı oranı ve hasta kooperasyonuna bağımlı olmadan kuvvet aktarımı gibi avantajlar sunmaktadır. Titanyum alaşımlı yapıları ve farklı tasarım seçenekleri, primer stabiliteyi artırarak anterior retraksiyon, molar distalizasyon, posterior intrüzyon ve transversal düzeltme gibi kompleks hareketlerin güvenle uygulanmasına olanak tanır. Ayrıca ortognatik cerrahi öncesi hazırlık ve çekimli tedavilerde etkin ankraj sağlamaktadır. Son yıllarda dijital planlama, CAD/CAM destekli cerrahi rehberler, yapay zekâ tabanlı öngörü sistemleri ve nanoteknolojik yüzey modifikasyonları, mini-implantların biyomekanik başarısını artıran yenilikler arasında yer almaktadır. Bununla birlikte, uzun dönem stabilite, radyasyon maruziyeti ve komplikasyon yönetimi gibi konular klinik ve etik sınırlılıkları gündeme getirmektedir. Sonuç olarak, mini-implantlar hem klinik etkinlik hem de biyomekanik kontrol açısından çağdaş ortodonti pratiğinde altın standart bir ankraj seçeneği olarak değerlendirilmektedir. Gelecek araştırmalar, uzun dönem sonuçların güçlendirilmesi, nanoteknoloji ve yapay zekâ entegrasyonunun optimize edilmesi ve hasta güvenliğini artıracak yeni protokollerin geliştirilmesi üzerine yoğunlaşmalıdır.
- 20 October 2025
- Published by Özgür Yayınları
- p. 105-116
Open AccessOrtodontide Biyomekanik Yenilikler: Mini-İmplantlar
Ortodontik tedavilerde ankraj kontrolü, öngörülebilir ve stabil sonuçlar için kritik öneme sahiptir. Geleneksel yöntemlerin sınırlılıkları, geçici ankraj aygıtlarını (TAD) modern ortodontide vazgeçilmez hale getirmiştir. Mini-implantlar; kolay yerleştirilebilirlik, düşük maliyet, yüksek başarı oranı ve hasta kooperasyonuna bağımlı olmadan kuvvet aktarımı gibi avantajlar sunmaktadır. Titanyum alaşımlı yapıları ve farklı tasarım seçenekleri, primer stabiliteyi artırarak anterior retraksiyon, molar distalizasyon, posterior intrüzyon ve transversal düzeltme gibi kompleks hareketlerin güvenle uygulanmasına olanak tanır. Ayrıca ortognatik cerrahi öncesi hazırlık ve çekimli tedavilerde etkin ankraj sağlamaktadır. Son yıllarda dijital planlama, CAD/CAM destekli cerrahi rehberler, yapay zekâ tabanlı öngörü sistemleri ve nanoteknolojik yüzey modifikasyonları, mini-implantların biyomekanik başarısını artıran yenilikler arasında yer almaktadır. Bununla birlikte, uzun dönem stabilite, radyasyon maruziyeti ve komplikasyon yönetimi gibi konular klinik ve etik sınırlılıkları gündeme getirmektedir. Sonuç olarak, mini-implantlar hem klinik etkinlik hem de biyomekanik kontrol açısından çağdaş ortodonti pratiğinde altın standart bir ankraj seçeneği olarak değerlendirilmektedir. Gelecek araştırmalar, uzun dönem sonuçların güçlendirilmesi, nanoteknoloji ve yapay zekâ entegrasyonunun optimize edilmesi ve hasta güvenliğini artıracak yeni protokollerin geliştirilmesi üzerine yoğunlaşmalıdır.