DDDebasis Datta

Debasis Datta

*This is an algorithmically generated author record based on publicly available information.

Debasis Datta has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Investigation of static and dynamic mechanical properties of graphene-based thermoplastic polyurethane nanocomposites: Experimental and MD simulation approach

    by Animesh Talapatra, Debasis Datta, Pritam Pain

    Recent advancements in multiscale analysis are essential for developing high-quality polymer nanocomposites (PNCs) with tailored thermo-mechanical and viscoelastic behaviour. In the current work, a dual approach combining experimental methods and non-equilibrium molecular dynamics (NEMD) simulations enable a thorough evaluation of the material’s performance. This approach provides deeper insights into the influence of graphene (Gr) at the atomic scale and validates these effects at the macroscale. Here, experimental tensile and dynamic mechanical analysis (DMA) testing, paired with NEMD simulations, are used to explore both the static and dynamic mechanical behaviours of Gr-based thermoplastic polyurethane (Gr/TPU) nanocomposites. Tensile and DMA testing results indicate that adding 3 wt % of graphene (Gr) to TPU increases the yield strength by 53.06% and the storage modulus by 17.20%, respectively. Notably, the glass transition temperature (T g ) shifts towards a higher value in the 3 wt% Gr/TPU nanocomposite. Due to weak interfacial interactions and high chain mobility, increasing the Gr content at higher temperatures triggers a decrease in the storage modulus while increasing both the loss tangent and loss modulus. This improvement in the damping factor (tan δ) makes these PNCs promising candidates for applications requiring shock absorption in engineering components.

  • Molecular dynamics simulation on mechanical behaviour of thermoplastic polyurethane hybrid nanocomposites reinforced with graphene and carbon nanotube

    by Pritam Pain, Animesh Talapatra, Debasis Datta

    This study explores the mechanical behaviour of polymer hybrid nanocomposites, where the matrix is reinforced with two carbon nanomaterials with different dimensional structures. Thermoplastic polyurethane (TPU), a widely recognized thermoplastic elastomer, is used as the matrix material with combinations of graphene (Gr) and single-walled carbon nanotube (SWCNT) as the nanofillers. Molecular dynamics (MD) simulations have been performed in this research to investigate the mechanical behaviour of different Gr and SWCNT-reinforced TPU (Gr-SWCNT/TPU) hybrid nanocomposites with varying nanofiller concentrations. MD simulations reveal that TPU, reinforced with 4 wt.% Gr and 4 wt.% SWCNT, produces maximum enhancement in elastic properties among all investigated configurations. The comparative investigation using fractional free volume and mean square displacement indicates reduced polymer chain mobility and stronger interfacial confinement at this composition. The elastic moduli of Gr-SWCNT/TPU are found to have substantial enhancements compared to Gr/TPU nanocomposites. Variations in the dispersion of Gr sheets reveal that well-dispersed Gr sheets in the hybrid nanocomposite system yield superior mechanical properties compared to the systems consisting of agglomerated or monolayer Gr sheets. Additionally, variations in CNTs’ different geometrical characteristics show that longer thinner SWCNTs exhibit enhanced mechanical performance compared to shorter thicker multi-walled CNTs. Hybrid nanocomposite systems with equal nanofiller concentration outperform those with the unequal proportions. Such enhancements call for use of hybrid nanocomposites in advanced engineering applications in place of nanocomposites with single nanofiller.


  • Characterization of morphological, mechanical, and thermal response of highly-filled thermoplastic polyurethane hybrid nanocomposites reinforced with graphene and single-walled carbon nanotube

    by Pritam Pain, Debasis Datta

    This research explores the influence of reinforcing Graphene (Gr) and Single-walled Carbon Nanotube (SWCNT) into Thermoplastic Polyurethane (TPU) on the thermo-mechanical behavior of Gr-SWCNT/TPU hybrid nanocomposites. Through the incorporation of SWCNTs along with Gr equally at higher nanofiller concentrations, a total of upto 10 wt.%, the thermal stability and mechanical stiffness of Gr-SWCNT/TPU hybrid nanocomposites are enhanced substantially. The dispersion of hybrid nano-reinforcements within the polymer matrix has been investigated using the microstructure images. Interactions between Gr-SWCNT hybrid nanofillers with TPU matrix material, construction of TPU linkages along with the elemental composition of pure TPU and Gr-SWCNT/TPU hybrid nanocomposites have been analyzed using different characterization techniques. Tensile testing demonstrates that TPU reinforced with 4 wt.% of each nanofiller. i.e., 4-4/92 hybrid nanocomposite, achieves 573.972% enhancement in elastic modulus compared to pure TPU. Further inclusion of carbon nanomaterials into TPU results in a reduction in tensile modulus. Enhanced thermal stability has been achieved through the incorporation of Gr-SWCNT hybrid nanofillers into TPU. 4-4/92 hybrid nanocomposite exhibits the most delayed decomposition (highest thermal stability) by 46 °C compared to that of TPU without any nano-reinforcements. Higher concentrations of nano-reinforcements beyond 4 wt.% Gr and 4 wt.% SWCNT in TPU are found to induce earlier thermal degradation. Such enhancements in thermal stability and mechanical stiffness are much better compared to those of TPU-based nanocomposites reinforced with single nanofillers. Further, the inclusion of hybrid nanomaterials within the polymer matrix reveals enhancements in melting temperature and reductions in glass transition temperature. The outcomes obtained in this study emphasize the potential of Gr-SWCNT hybrid nano-reinforcements to improve the thermo-mechanical performance of TPU for advanced applications.

  • Open Access

    Investigation of Static and Dynamic Mechanical Properties of Graphene-Based Thermoplastic Polyurethane Nanocomposites: Experimental and MD Simulation Approach

    by Animesh Talapatra, Debasis Datta, Pritam Pain

    Recent time multiscale analysis is very essential to develop high-performance polymer nanocomposites (PNCs) with tailored mechanical properties. In the current study, experimental and Non-equilibrium Molecular Dynamics (NEMD) simulation-based dual approaches enable a comprehensive evaluation of the material’s performance, providing deeper insight of the influence of Graphene (Gr) at the atomic scale and validating those effects at the macroscale. Here, experimental techniques with NEMD simulations are used to explore both static and dynamic mechanical behaviour of Graphene-based Thermoplastic Polyurethane (Gr/TPU) nanocomposites. Tensile testing results indicate that the optimal loading threshold for Graphene (Gr) in TPU leads to a reduction in mechanical properties. Results reveals that with increasing temperature, the loss tangent and loss modulus increase, but decreases the storage modulus due to weak interfacial interactions. Notably, the glass transition temperature (Tg) of the Gr/TPU nanocomposites shifts towards higher values when Gr is incorporated. This improvement makes them promising candidates for applications requiring effective vibration or shock absorption in engineering components.

  • An Ultrasonic Non-Destructive Evaluation of Contents of Silica Powder and Carbon Black in Nitrile Rubbers

    by S. Mondal, D. Datta

    Ultrasonic testing is primarily used as one of the popular non-destructive methods. Ultrasonic non-destructive methodologies are also being used as effective tools for process characterization and property detection in engineering materials, including polymers, rubbers etc. Different additives are mixed with pure rubber to improve mechanical properties like hardness, tensile strength, ductility etc. Such property changes are seen to have direct bearings on features of ultrasonic waves. The present research is focused on the study of the interaction between ultrasonic wave velocity and quantum of additives (silica powder, carbon black) in rubbers. Nitrile rubber samples, mixed with different weight percentages of silica powder (varying from 28 to 43%) and carbon black (varying from 16 to 43%), have been considered for experimentation. An experimental setup, consisting of an ultrasonic transducer and heating arrangement, has been developed in-house for observing ultrasonic pulse behaviour from the samples at varying temperatures (30–160°C). All the experiments have been carried out with a 1 MHz piezoelectric transducer operating in pulse-echo mode to determine ultrasonic wave velocity in the longitudinal mode in the rubber samples at different temperatures. It is found that the experimental results, that the variation of ultrasonic longitudinal velocity (ULV) in NBR samples at different temperatures are able to differentiate the types of additives and their contents (in wt %) in them by the slope and intercept of the best-fit-line of the ULV vs. temperature variations, respectively.


  • Real-Time Ultrasonic Monitoring of the Vulcanization Process in Nitrile Rubbers

    by Subhasis Mondal, Debasis Datta

    Nitrile rubbers, also known as Nitrile-Butadiene rubbers, belong to the category of synthetic rubbers and are a better choice as materials for applications requiring higher abrasion resistance and material adhesion. To meet the requirements, vulcanization of such rubbers to the appropriate level is necessary. Earlier, various spectroscopy-based experimental techniques and methods like nuclear magnetic resonance (NMR), chemical analysis, DMA analysis, differential calorimetric have been reported to be used to detect cure reaction of thermosets. In the present work, ultrasonic measurement techniques are employed on the rubber samples in a nondestructive manner via a test setup integrated with a fully automated ultrasonic data acquisition system developed in-house. Real-time monitoring of the vulcanization process of the rubber samples is carried out at different temperatures in order to capture the dependence of the rate of vulcanization on ultrasonic parameters. Tests are carried out at five different temperatures ranging from 140 to 180°C on nitrile rubber samples, and temporal variations of ultrasonic velocity and back wall amplitude are derived by post-processing the digitized data. Ultrasonic responses are observed to identify the rate of vulcanization and completion of the vulcanization process comprehensively. Observations are further consolidated by hardness measurements on the bounding faces of the rubber samples.


  • Estimation of improvement in elastic moduli for functionalised defective graphene-based thermoplastic polyurethane nanocomposites: a molecular dynamics approach

    by Animesh Talapatra, Debasis Datta

    This molecular dynamics (MD) simulation-based study provides a comprehensive investigation about improvement in elastic moduli and strength properties of Stone–Wales defective hydrogen functionalised graphene-reinforced thermoplastic polyurethane (SW-fGr/TPU) nanocomposite. Three models, namely concentration model (CM), stacked model (SM) and interfacial model (IM), have been used here to estimate improvements under the effect of weight concentrations, aspect ratios, dispersion and stacking conditions using the constant strain method with COMPASS II force field. High enhancement in moduli values is observed for CM models due to the high aspect ratio and 4 wt-% of SW-fGr addition in pure TPU. The values of in-plane elastic moduli of stacked dispersed models are found to be higher than the values of stacked agglomerated models. Out of all SM models, maximum in-plane and out-of-plane shear moduli are obtained in the agglomerated (stacked) Gr conditions. The interfacial normal strength is found to be substantially higher than interfacial shear strength within the IM models. The enhancement of elastic moduli in SW-fGr/TPU has been confirmed by using atomic density profile, fractional free-volume calculation and Connolly surface analyses. Some of these MD simulation results are in good agreement with those from previous investigations.