PPPritam Pain

Pritam Pain

*This is an algorithmically generated author record based on publicly available information.

Pritam Pain has a total of 2 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Investigation of static and dynamic mechanical properties of graphene-based thermoplastic polyurethane nanocomposites: Experimental and MD simulation approach

    by Animesh Talapatra, Debasis Datta, Pritam Pain

    Recent advancements in multiscale analysis are essential for developing high-quality polymer nanocomposites (PNCs) with tailored thermo-mechanical and viscoelastic behaviour. In the current work, a dual approach combining experimental methods and non-equilibrium molecular dynamics (NEMD) simulations enable a thorough evaluation of the material’s performance. This approach provides deeper insights into the influence of graphene (Gr) at the atomic scale and validates these effects at the macroscale. Here, experimental tensile and dynamic mechanical analysis (DMA) testing, paired with NEMD simulations, are used to explore both the static and dynamic mechanical behaviours of Gr-based thermoplastic polyurethane (Gr/TPU) nanocomposites. Tensile and DMA testing results indicate that adding 3 wt % of graphene (Gr) to TPU increases the yield strength by 53.06% and the storage modulus by 17.20%, respectively. Notably, the glass transition temperature (T g ) shifts towards a higher value in the 3 wt% Gr/TPU nanocomposite. Due to weak interfacial interactions and high chain mobility, increasing the Gr content at higher temperatures triggers a decrease in the storage modulus while increasing both the loss tangent and loss modulus. This improvement in the damping factor (tan δ) makes these PNCs promising candidates for applications requiring shock absorption in engineering components.

  • Molecular dynamics simulation on mechanical behaviour of thermoplastic polyurethane hybrid nanocomposites reinforced with graphene and carbon nanotube

    by Pritam Pain, Animesh Talapatra, Debasis Datta

    This study explores the mechanical behaviour of polymer hybrid nanocomposites, where the matrix is reinforced with two carbon nanomaterials with different dimensional structures. Thermoplastic polyurethane (TPU), a widely recognized thermoplastic elastomer, is used as the matrix material with combinations of graphene (Gr) and single-walled carbon nanotube (SWCNT) as the nanofillers. Molecular dynamics (MD) simulations have been performed in this research to investigate the mechanical behaviour of different Gr and SWCNT-reinforced TPU (Gr-SWCNT/TPU) hybrid nanocomposites with varying nanofiller concentrations. MD simulations reveal that TPU, reinforced with 4 wt.% Gr and 4 wt.% SWCNT, produces maximum enhancement in elastic properties among all investigated configurations. The comparative investigation using fractional free volume and mean square displacement indicates reduced polymer chain mobility and stronger interfacial confinement at this composition. The elastic moduli of Gr-SWCNT/TPU are found to have substantial enhancements compared to Gr/TPU nanocomposites. Variations in the dispersion of Gr sheets reveal that well-dispersed Gr sheets in the hybrid nanocomposite system yield superior mechanical properties compared to the systems consisting of agglomerated or monolayer Gr sheets. Additionally, variations in CNTs’ different geometrical characteristics show that longer thinner SWCNTs exhibit enhanced mechanical performance compared to shorter thicker multi-walled CNTs. Hybrid nanocomposite systems with equal nanofiller concentration outperform those with the unequal proportions. Such enhancements call for use of hybrid nanocomposites in advanced engineering applications in place of nanocomposites with single nanofiller.


  • Characterization of morphological, mechanical, and thermal response of highly-filled thermoplastic polyurethane hybrid nanocomposites reinforced with graphene and single-walled carbon nanotube

    by Pritam Pain, Debasis Datta

    This research explores the influence of reinforcing Graphene (Gr) and Single-walled Carbon Nanotube (SWCNT) into Thermoplastic Polyurethane (TPU) on the thermo-mechanical behavior of Gr-SWCNT/TPU hybrid nanocomposites. Through the incorporation of SWCNTs along with Gr equally at higher nanofiller concentrations, a total of upto 10 wt.%, the thermal stability and mechanical stiffness of Gr-SWCNT/TPU hybrid nanocomposites are enhanced substantially. The dispersion of hybrid nano-reinforcements within the polymer matrix has been investigated using the microstructure images. Interactions between Gr-SWCNT hybrid nanofillers with TPU matrix material, construction of TPU linkages along with the elemental composition of pure TPU and Gr-SWCNT/TPU hybrid nanocomposites have been analyzed using different characterization techniques. Tensile testing demonstrates that TPU reinforced with 4 wt.% of each nanofiller. i.e., 4-4/92 hybrid nanocomposite, achieves 573.972% enhancement in elastic modulus compared to pure TPU. Further inclusion of carbon nanomaterials into TPU results in a reduction in tensile modulus. Enhanced thermal stability has been achieved through the incorporation of Gr-SWCNT hybrid nanofillers into TPU. 4-4/92 hybrid nanocomposite exhibits the most delayed decomposition (highest thermal stability) by 46 °C compared to that of TPU without any nano-reinforcements. Higher concentrations of nano-reinforcements beyond 4 wt.% Gr and 4 wt.% SWCNT in TPU are found to induce earlier thermal degradation. Such enhancements in thermal stability and mechanical stiffness are much better compared to those of TPU-based nanocomposites reinforced with single nanofillers. Further, the inclusion of hybrid nanomaterials within the polymer matrix reveals enhancements in melting temperature and reductions in glass transition temperature. The outcomes obtained in this study emphasize the potential of Gr-SWCNT hybrid nano-reinforcements to improve the thermo-mechanical performance of TPU for advanced applications.

  • Open Access

    Investigation of Static and Dynamic Mechanical Properties of Graphene-Based Thermoplastic Polyurethane Nanocomposites: Experimental and MD Simulation Approach

    by Animesh Talapatra, Debasis Datta, Pritam Pain

    Recent time multiscale analysis is very essential to develop high-performance polymer nanocomposites (PNCs) with tailored mechanical properties. In the current study, experimental and Non-equilibrium Molecular Dynamics (NEMD) simulation-based dual approaches enable a comprehensive evaluation of the material’s performance, providing deeper insight of the influence of Graphene (Gr) at the atomic scale and validating those effects at the macroscale. Here, experimental techniques with NEMD simulations are used to explore both static and dynamic mechanical behaviour of Graphene-based Thermoplastic Polyurethane (Gr/TPU) nanocomposites. Tensile testing results indicate that the optimal loading threshold for Graphene (Gr) in TPU leads to a reduction in mechanical properties. Results reveals that with increasing temperature, the loss tangent and loss modulus increase, but decreases the storage modulus due to weak interfacial interactions. Notably, the glass transition temperature (Tg) of the Gr/TPU nanocomposites shifts towards higher values when Gr is incorporated. This improvement makes them promising candidates for applications requiring effective vibration or shock absorption in engineering components.