Stefaan Ides
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Stefaan Ides has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
Gauthier de Borrekens
CoSys-Lab, Faculty of Applied Engineering, University of Antwerp, Antwerp, Belgium
1 shared publication- Jan Steckel
CoSys-Lab, Faculty of Applied Engineering, University of Antwerp, Antwerp, Belgium
1 shared publication - Katrien Eloot
Flanders Hydraulics
1 shared publication - Marc Vantorre
Ghent University
1 shared publication - Robin Kerstens
CoSys-Lab, Faculty of Applied Engineering, University of Antwerp, Antwerp, Belgium
1 shared publication - Thibaut Van Zwijnsvoorde
Maritime Technology Division, Ghent University, Ghent, Belgium
1 shared publication
Latest Publications
- 19 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 7 (2) , 1-3
Tracking Moored Vessel Movement in Multiple DOF Using Active Sensing Methods
Over the years the economics of scale have caused vessels used for transportation of goods to become increasingly larger, handling more containers. This increase in capacity (and particular in the dimensions of the vessels) leads to larger forces on the moored vessels during (un)loading operations and as a result, the process becomes more prone to potential errors. One of those risks is the movement of the vessel that occurs despite of it being moored with a large number of mooring lines. These movements can cause the handling process to slow down, limiting harbor efficiency, and to potentially endanger harbor personnel. It is of great importance for harbors to get a clear sense of these movements so that they can be analyzed and help implement efficient measures to minimize any potential dangers. In this paper several active sensing methods (SONAR, RADAR and LiDAR) are used to try and capture these movements in multiple degrees of freedom and their results are compared. Initially the testing is done in a simulated harbor environment and afterwards the setups are validated in practice at several different active quays in the Port of Antwerp-Bruges, Belgium.
- 19 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 7 (2) , 1-3
Tracking Moored Vessel Movement in Multiple DOF Using Active Sensing Methods
Over the years the economics of scale have caused vessels used for transportation of goods to become increasingly larger, handling more containers. This increase in capacity (and particular in the dimensions of the vessels) leads to larger forces on the moored vessels during (un)loading operations and as a result, the process becomes more prone to potential errors. One of those risks is the movement of the vessel that occurs despite of it being moored with a large number of mooring lines. These movements can cause the handling process to slow down, limiting harbor efficiency, and to potentially endanger harbor personnel. It is of great importance for harbors to get a clear sense of these movements so that they can be analyzed and help implement efficient measures to minimize any potential dangers. In this paper several active sensing methods (SONAR, RADAR and LiDAR) are used to try and capture these movements in multiple degrees of freedom and their results are compared. Initially the testing is done in a simulated harbor environment and afterwards the setups are validated in practice at several different active quays in the Port of Antwerp-Bruges, Belgium.
- 18 March 2019
- Published by Emerald Publishing in Maritime Business Review
- Vol. 4 (1) , 106-127
Safety of container ship (un)loading operations in the Port of Antwerp
Purpose: Economies of scale drive container ship owners towards ordering larger vessels. Terminals need to ensure a safe (un)loading operation of these vessels, which can only be guaranteed if the mooring equipment is not overloaded (lines, fenders and bollards) and if the motions of the vessel remain below set limits, under external forces. This paper aims to focus on the passing vessel effect as a potential disturbing factor in the Port of Antwerp.Design/methodology/approach: Motion criteria for allowing safe (un)loading of container vessels are established by considering the container handling process and existing international standards (PIANC). A case study simulation is presented where the behaviour of the moored vessel under ship passages is evaluated. Starting from a representative event, the effect of changes in passing speed and distance is discussed.Findings: The study illustrates the influence of passing velocity and distance on the behaviour of the moored vessel, showing that when passing speeds are higher and/or distances lower than the reference event, safety limits are potentially exceeded. Possible mitigating measures, including the use of stiffer mooring lines and/or a change in arrangement, are discussed.Research limitations/implications: This paper serves as a basis for future research on safety criteria and optimisation of the mooring equipment and configuration to deal with passing vessel effects.Practical implications: The presented results can be used by ship and terminal designers to gain familiarity with passing vessel effects and adopt suggested best practice.Social implications: By restricting the motions of the passing vessels, the focus and general well-being of the crane operator is enhanced, as is the safety of workers.Originality/value: The paper provides a unique combination of container fleet observation, safety criteria establishment and case study application.
- 18 March 2019
- Published by Emerald Publishing in Maritime Business Review
- Vol. 4 (1) , 106-127
Safety of container ship (un)loading operations in the Port of Antwerp
Purpose: Economies of scale drive container ship owners towards ordering larger vessels. Terminals need to ensure a safe (un)loading operation of these vessels, which can only be guaranteed if the mooring equipment is not overloaded (lines, fenders and bollards) and if the motions of the vessel remain below set limits, under external forces. This paper aims to focus on the passing vessel effect as a potential disturbing factor in the Port of Antwerp.Design/methodology/approach: Motion criteria for allowing safe (un)loading of container vessels are established by considering the container handling process and existing international standards (PIANC). A case study simulation is presented where the behaviour of the moored vessel under ship passages is evaluated. Starting from a representative event, the effect of changes in passing speed and distance is discussed.Findings: The study illustrates the influence of passing velocity and distance on the behaviour of the moored vessel, showing that when passing speeds are higher and/or distances lower than the reference event, safety limits are potentially exceeded. Possible mitigating measures, including the use of stiffer mooring lines and/or a change in arrangement, are discussed.Research limitations/implications: This paper serves as a basis for future research on safety criteria and optimisation of the mooring equipment and configuration to deal with passing vessel effects.Practical implications: The presented results can be used by ship and terminal designers to gain familiarity with passing vessel effects and adopt suggested best practice.Social implications: By restricting the motions of the passing vessels, the focus and general well-being of the crane operator is enhanced, as is the safety of workers.Originality/value: The paper provides a unique combination of container fleet observation, safety criteria establishment and case study application.