Xirui Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Xirui Wang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Hua Wang
Guangxi Transportation Science and Technology Group Co., Ltd., Nanning 530007, China
5 shared publications - Wensheng Wang
College of Transportation, Jilin University, Changchun 130022, China
5 shared publications - Hanbing Liu
College of Transportation, Jilin University, Changchun 130025, China
4 shared publications - Longlin Wang
Bridge Engineering Research Institute, Guangxi Transportation Science and Technology Group Co., Ltd., Nanning 530007, China
4 shared publications - Guojin Tan
College of Transportation, Jilin University, Changchun 130025, China
3 shared publications - Kainan Huang
Guangxi Transportation Science and Technology Group Co., Ltd., Nanning 530007, China
3 shared publications
Latest Publications
- Open Access
- 29 July 2023
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 57 (4) , 333–339
INFLUENCE OF CEMENT CONTENT AND MOISTURE CONTENT ON THE PULLOUT-INTERFACE PROPERTIES OF GEOGRID-SOLIDIFIED WASTE MUD
In engineering, waste mud is often used as a filling material after a solidification treatment. Geogrids, being excellent geotechnical engineering materials, are often used for soil reinforcement. In this work, a pullout test that considered the influence of different waste-mud moisture contents and cement contents was conducted to investigate the interface characteristics of geogrid-solidified waste-mud-reinforced soil. Then, the relationship between the pullout force and displacement, and the variations in the cohesion, friction angle and quasifriction coefficient were analysed. The results showed that the pullout force-displacement curve represented a strain-softening pattern. With the increasing moisture content, the peak pullout force, interfacial cohesion and quasifriction coefficient decreased gradually, but the internal friction angle did not change substantially. With the increasing cement content, the peak pullout force, interfacial cohesion, internal friction angle and quasifriction coefficient increased gradually. The peak pullout force was linearly correlated with the change in the moisture content and logarithmically correlated with the change in the cement content. Compared with the moisture content, the reinforcement-soil interface was more affected by the cement content. This study provides guidelines for the mixture design of reinforced solidified waste mud.
- 29 July 2023
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 57 (4) , 333–339
Open AccessINFLUENCE OF CEMENT CONTENT AND MOISTURE CONTENT ON THE PULLOUT-INTERFACE PROPERTIES OF GEOGRID-SOLIDIFIED WASTE MUD
In engineering, waste mud is often used as a filling material after a solidification treatment. Geogrids, being excellent geotechnical engineering materials, are often used for soil reinforcement. In this work, a pullout test that considered the influence of different waste-mud moisture contents and cement contents was conducted to investigate the interface characteristics of geogrid-solidified waste-mud-reinforced soil. Then, the relationship between the pullout force and displacement, and the variations in the cohesion, friction angle and quasifriction coefficient were analysed. The results showed that the pullout force-displacement curve represented a strain-softening pattern. With the increasing moisture content, the peak pullout force, interfacial cohesion and quasifriction coefficient decreased gradually, but the internal friction angle did not change substantially. With the increasing cement content, the peak pullout force, interfacial cohesion, internal friction angle and quasifriction coefficient increased gradually. The peak pullout force was linearly correlated with the change in the moisture content and logarithmically correlated with the change in the cement content. Compared with the moisture content, the reinforcement-soil interface was more affected by the cement content. This study provides guidelines for the mixture design of reinforced solidified waste mud.
- Open Access
Symmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method
Because of their beautiful appearance, strong crossing ability, and reasonable stress performance, the application of tied steel box arch bridges is becoming more and more extensive. Bridge construction monitoring can control and adjust the deviation state to ensure the stress and linear state of the bridge after completion. This study carried out a symmetrical construction monitoring analysis and completed state evaluation of the newly built Dafeng River Bridge in Guangxi Province based on the finite element method. MIDAS Civil finite element software is used for simulation analysis to calculate the deformation and stress of the tied steel box arch bridge at the construction and completion stages. The tensile and compressive stress of the main arch and transverse brace, as well as the cumulative displacements of the main arch and lattice beam, are symmetrically distributed. The maximum tensile and compressive stresses are 15.1 MPa and 74.6 MPa, respectively, less than the specification’s allowable value. Meanwhile, for the completed bridge under the loading combinations of serviceability limit state and bearing capacity ultimate limit state, the stress of the main arch, transverse brace, and lattice beam meets the specification requirements. The maximum cable forces of the suspender and tie rod under the bearing capacity ultimate limit state are 2189.4 kN and 2991.2 kN, and their corresponding minimum safety factors are 3.2 and 2.7. In addition, the deviations between the on-site monitoring and the finite element theoretical values are within the specification allowable range for the cable force of the suspender and tie rod and the bridge deck alignment. It indicates that the bridge construction monitoring effect is reasonable and ideal, and the symmetrically finite element simulation analysis can provide a theoretical basis for construction monitoring.
Open AccessSymmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method
Because of their beautiful appearance, strong crossing ability, and reasonable stress performance, the application of tied steel box arch bridges is becoming more and more extensive. Bridge construction monitoring can control and adjust the deviation state to ensure the stress and linear state of the bridge after completion. This study carried out a symmetrical construction monitoring analysis and completed state evaluation of the newly built Dafeng River Bridge in Guangxi Province based on the finite element method. MIDAS Civil finite element software is used for simulation analysis to calculate the deformation and stress of the tied steel box arch bridge at the construction and completion stages. The tensile and compressive stress of the main arch and transverse brace, as well as the cumulative displacements of the main arch and lattice beam, are symmetrically distributed. The maximum tensile and compressive stresses are 15.1 MPa and 74.6 MPa, respectively, less than the specification’s allowable value. Meanwhile, for the completed bridge under the loading combinations of serviceability limit state and bearing capacity ultimate limit state, the stress of the main arch, transverse brace, and lattice beam meets the specification requirements. The maximum cable forces of the suspender and tie rod under the bearing capacity ultimate limit state are 2189.4 kN and 2991.2 kN, and their corresponding minimum safety factors are 3.2 and 2.7. In addition, the deviations between the on-site monitoring and the finite element theoretical values are within the specification allowable range for the cable force of the suspender and tie rod and the bridge deck alignment. It indicates that the bridge construction monitoring effect is reasonable and ideal, and the symmetrically finite element simulation analysis can provide a theoretical basis for construction monitoring.
- Open Access
- 12 August 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (16) , 10008
Fatigue Durability Analysis for Suspenders of Arch Bridge Subjected to Moving Vehicles in Southwest China
An analysis of the effect of vehicle loads on the fatigue life of local arch bridge suspenders in Southwest China was conducted by generating vehicle statistics, creating a fatigue vehicle model, and developing a fatigue life prediction method: First, the Midas model of an arch bridge was established, a random vehicle flow simulation was conducted in the Monte Carlo method, and the stress spectrum of the suspenders was calculated. Secondly, ANSYS software was used to estimate the fatigue life of the suspenders, and the accuracy of the proposed method was verified. Finally, the method was applied to the practical project of the Dafeng River Bridge in Southwest China. The results show that this method can predict the fatigue life of suspenders. It can be applied in the bridge health monitoring software system to realize real-time fatigue damage monitoring of the fatigue damage of suspenders, which could be used to predict the fatigue lives of bridges in Southwest China and provide references for the replacement of suspenders.
- 12 August 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (16) , 10008
Open AccessFatigue Durability Analysis for Suspenders of Arch Bridge Subjected to Moving Vehicles in Southwest China
An analysis of the effect of vehicle loads on the fatigue life of local arch bridge suspenders in Southwest China was conducted by generating vehicle statistics, creating a fatigue vehicle model, and developing a fatigue life prediction method: First, the Midas model of an arch bridge was established, a random vehicle flow simulation was conducted in the Monte Carlo method, and the stress spectrum of the suspenders was calculated. Secondly, ANSYS software was used to estimate the fatigue life of the suspenders, and the accuracy of the proposed method was verified. Finally, the method was applied to the practical project of the Dafeng River Bridge in Southwest China. The results show that this method can predict the fatigue life of suspenders. It can be applied in the bridge health monitoring software system to realize real-time fatigue damage monitoring of the fatigue damage of suspenders, which could be used to predict the fatigue lives of bridges in Southwest China and provide references for the replacement of suspenders.
- Open Access
- 10 July 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (14) , 8432
Mechanical Properties, Durability and Leaching Toxicity of Cement-Stabilized Macadam Incorporating Reclaimed Clay Bricks as Fine Aggregate
The utilization of reclaimed clay brick (RCB) from construction and demolition (C&D) waste is an extremely troublesome problem, which is beneficial and necessary for environmental protection and resource conservation. The objective of this study is to evaluate the mechanical properties, durability and environmental impact of cement-stabilized macadam (CSM) incorporating RCB. The physical and chemical properties of RCB were characterized by scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) technologies. RCB exhibited a porous surface micro-morphology, high water absorption and pozzolanic activity. The higher RCB substitution ratio resulted in a lower unconfined compressive strength of CSM. Meanwhile, the higher the RCB substitution ratio was, the larger the 90 d indirect tensile strength of CSM at the late curing period. The RCB substitution ratio within 50% was beneficial for the freeze-thaw resistance of CSM. Additionally, RCB had a smaller aggregate size, causing a negative influence on the anti-scouring property of CSM. CSM incorporating RCB had an overall increasing accumulative water loss rate, and average coefficients of dry shrinkage and temperature shrinkage, except that 20% RCB substitution ratio resulted in an excellent dry shrinkage property. Based on the chemical analysis of EDTA-2Na, the pozzolanic RCB reacted mainly at later curing to form the crystal structure, enhancing the interfacial transition zone. Additionally, the leaching solutions could meet the identification requirements for extraction toxicity, surface water and groundwater referring to Chinese standards. Utilizing RCB in road engineering as the substitute for natural aggregate would be a promising step forward to sustainable development and green construction.
- 10 July 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (14) , 8432
Open AccessMechanical Properties, Durability and Leaching Toxicity of Cement-Stabilized Macadam Incorporating Reclaimed Clay Bricks as Fine Aggregate
The utilization of reclaimed clay brick (RCB) from construction and demolition (C&D) waste is an extremely troublesome problem, which is beneficial and necessary for environmental protection and resource conservation. The objective of this study is to evaluate the mechanical properties, durability and environmental impact of cement-stabilized macadam (CSM) incorporating RCB. The physical and chemical properties of RCB were characterized by scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) technologies. RCB exhibited a porous surface micro-morphology, high water absorption and pozzolanic activity. The higher RCB substitution ratio resulted in a lower unconfined compressive strength of CSM. Meanwhile, the higher the RCB substitution ratio was, the larger the 90 d indirect tensile strength of CSM at the late curing period. The RCB substitution ratio within 50% was beneficial for the freeze-thaw resistance of CSM. Additionally, RCB had a smaller aggregate size, causing a negative influence on the anti-scouring property of CSM. CSM incorporating RCB had an overall increasing accumulative water loss rate, and average coefficients of dry shrinkage and temperature shrinkage, except that 20% RCB substitution ratio resulted in an excellent dry shrinkage property. Based on the chemical analysis of EDTA-2Na, the pozzolanic RCB reacted mainly at later curing to form the crystal structure, enhancing the interfacial transition zone. Additionally, the leaching solutions could meet the identification requirements for extraction toxicity, surface water and groundwater referring to Chinese standards. Utilizing RCB in road engineering as the substitute for natural aggregate would be a promising step forward to sustainable development and green construction.
- Open Access
- 28 March 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-11
Study on Evaluation Theory of Bridge Damage State and Methodology on Early Warning of Danger
When evaluating and prewarning the damage state of bridges, the observation equation and state equation of bridge systems are not constructed in the existing methods, which would cause the evaluation results to be inconsistent with the actual damage state of bridges. Therefore, the existing methods have the problems of low evaluation accuracy, high false alarm rate, and poor real-time performance. In order to solve the above problems, this paper proposes a novel evaluation and judgment theory of bridge damage state and methodology on early warning of danger. The wavelet packet analysis method is used to construct the observation equation and state equation of bridge systems, which could provide a relevant basis for evaluating the damage state of bridges. Then, the fuzzy comprehensive evaluation method is used to construct the fuzzy evaluation model of the bridge damage state to evaluate and judge the damage state of bridges. According to the evaluation results, combined with mathematical-statistical analysis methods and principal component analysis methods, the methodology on early warning of danger for bridge structures can be realized. The experimental results showed that the proposed method has high evaluation and judgment accuracy, low false alarm rate, and good real-time performance and reliability.
- 28 March 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-11
Open AccessStudy on Evaluation Theory of Bridge Damage State and Methodology on Early Warning of Danger
When evaluating and prewarning the damage state of bridges, the observation equation and state equation of bridge systems are not constructed in the existing methods, which would cause the evaluation results to be inconsistent with the actual damage state of bridges. Therefore, the existing methods have the problems of low evaluation accuracy, high false alarm rate, and poor real-time performance. In order to solve the above problems, this paper proposes a novel evaluation and judgment theory of bridge damage state and methodology on early warning of danger. The wavelet packet analysis method is used to construct the observation equation and state equation of bridge systems, which could provide a relevant basis for evaluating the damage state of bridges. Then, the fuzzy comprehensive evaluation method is used to construct the fuzzy evaluation model of the bridge damage state to evaluate and judge the damage state of bridges. According to the evaluation results, combined with mathematical-statistical analysis methods and principal component analysis methods, the methodology on early warning of danger for bridge structures can be realized. The experimental results showed that the proposed method has high evaluation and judgment accuracy, low false alarm rate, and good real-time performance and reliability.
- Open Access
- 24 February 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (5) , 2367
Performance Evaluation of a Long-Span Cable-Stayed Bridge Using Non-Destructive Field Loading Tests
As an important part of the transportation network, the reliability of bridge structures is of great significance to people’s personal safety, as well as to the national economy. In order to evaluate the performance of complex bridge structures, their mechanical behavior and fundamental characteristics need to be studied. Structural health monitoring (SHM) has been introduced into bridge engineering, and the structural response assessment, load effects monitoring, and reliability evaluation have been developed based on the collected SHM information. In this study, a performance evaluation method for complex bridge structures based on non-destructive field loading tests is proposed. The cable-stayed bridge in Guangxi with the largest span (Pingnan Xiangsizhou Bridge) was selected as the research object, and loading on the main girder was transferred to the piers and tower through the stay cables, whose structural responses are critical in the process of bridge operation. Therefore, the field loading tests—including deflection and strain testing of the main girder, as well as cable force tests—were also conducted for Pingnan Xiangsizhou Bridge by using non-destructive measurement techniques (multifunctional static strain test system, radar interferometric deformation measurement technology, etc.). Based on the numerically simulated results of a finite element model for Pingnan Xiangsizhou Bridge, reasonable field loading test conditions and loading arrangement were determined. Non-destructive field loading test results showed that the quality of the bridge’s construction is up to standard, due to a good agreement between the calculated and measured frequencies of the bridge. In addition, the calibration coefficients of displacement and strain were less than 1, indicating that Pingnan Xiangsizhou Bridge has satisfactory stiffness and strength.
- 24 February 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (5) , 2367
Open AccessPerformance Evaluation of a Long-Span Cable-Stayed Bridge Using Non-Destructive Field Loading Tests
As an important part of the transportation network, the reliability of bridge structures is of great significance to people’s personal safety, as well as to the national economy. In order to evaluate the performance of complex bridge structures, their mechanical behavior and fundamental characteristics need to be studied. Structural health monitoring (SHM) has been introduced into bridge engineering, and the structural response assessment, load effects monitoring, and reliability evaluation have been developed based on the collected SHM information. In this study, a performance evaluation method for complex bridge structures based on non-destructive field loading tests is proposed. The cable-stayed bridge in Guangxi with the largest span (Pingnan Xiangsizhou Bridge) was selected as the research object, and loading on the main girder was transferred to the piers and tower through the stay cables, whose structural responses are critical in the process of bridge operation. Therefore, the field loading tests—including deflection and strain testing of the main girder, as well as cable force tests—were also conducted for Pingnan Xiangsizhou Bridge by using non-destructive measurement techniques (multifunctional static strain test system, radar interferometric deformation measurement technology, etc.). Based on the numerically simulated results of a finite element model for Pingnan Xiangsizhou Bridge, reasonable field loading test conditions and loading arrangement were determined. Non-destructive field loading test results showed that the quality of the bridge’s construction is up to standard, due to a good agreement between the calculated and measured frequencies of the bridge. In addition, the calibration coefficients of displacement and strain were less than 1, indicating that Pingnan Xiangsizhou Bridge has satisfactory stiffness and strength.
- Open Access
- 15 October 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (20) , 9607
Study on the Precise Displacement Controlling Method for a Suspended Deck in the Hanger Replacement Process of an Arch Bridge
The hanger often needs to be replaced many times during the operation period of hanger arch bridges. To ensure the safety of the hanger replacement in the construction process of pocket hanging, the structural response in the whole construction process needs to be precisely controlled. In this paper, aiming at half-through arches with a suspended deck by cable hangers, the precise displacement controlling method for hanger replacement of an arch bridge based on the pocket hanging method has been proposed. Firstly, the equivalent model of an arch bridge in the hanger replacement process is established, and the boundary conditions of the equivalent model are calculated precisely. Secondly, in the hanger replacement process, including old hanger demolition and new hanger installation, the precise displacement expressions of the suspended deck are derived on the basis of the equivalent model. Finally, the correctness and feasibility of the proposed precise displacement controlling method are verified by the hanger replacement engineering of an arch bridge. Through this research on the hanger replacement of an arch bridge, the equivalent model adopted in this paper has been proven accurate, and only partial boundary conditions need to be considered in practical engineering applications to get accurate results. Meanwhile, the calculation results are accurate enough through the practical engineering verification, and the precise displacement controlling method is feasible in the hanger replacement process of an arch bridge based on the pocket hanging method. It is also found that satisfactory results can be achieved using hanger demolition and installation by equal step length.
- 15 October 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (20) , 9607
Open AccessStudy on the Precise Displacement Controlling Method for a Suspended Deck in the Hanger Replacement Process of an Arch Bridge
The hanger often needs to be replaced many times during the operation period of hanger arch bridges. To ensure the safety of the hanger replacement in the construction process of pocket hanging, the structural response in the whole construction process needs to be precisely controlled. In this paper, aiming at half-through arches with a suspended deck by cable hangers, the precise displacement controlling method for hanger replacement of an arch bridge based on the pocket hanging method has been proposed. Firstly, the equivalent model of an arch bridge in the hanger replacement process is established, and the boundary conditions of the equivalent model are calculated precisely. Secondly, in the hanger replacement process, including old hanger demolition and new hanger installation, the precise displacement expressions of the suspended deck are derived on the basis of the equivalent model. Finally, the correctness and feasibility of the proposed precise displacement controlling method are verified by the hanger replacement engineering of an arch bridge. Through this research on the hanger replacement of an arch bridge, the equivalent model adopted in this paper has been proven accurate, and only partial boundary conditions need to be considered in practical engineering applications to get accurate results. Meanwhile, the calculation results are accurate enough through the practical engineering verification, and the precise displacement controlling method is feasible in the hanger replacement process of an arch bridge based on the pocket hanging method. It is also found that satisfactory results can be achieved using hanger demolition and installation by equal step length.
- Open Access
- 27 January 2021
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
An Accurate Measurement Method for Tension Force of Short Cable by Additional Mass Block
The equivalent effective length parameter is introduced into the vibration equation of short cable; that is, the boundary condition that affects the test accuracy of short cable force is equivalent to the calculated length of cable. By attaching an additional mass block to the cable, new parameters are introduced to identify the tension force. Vibration differential equations are established for cable with and without addition mass block, taking new parameters into account, such as equivalent effective length and added mass. By solving the equations using the RITZ method, the analytical relationship between the natural frequency of cable and equivalent effective length before and after a mass block is added can be developed. It can also develop an analytical method to identify the equivalent effective length depending on whether the added mass block is attached. Then, tension force of short length cable can be evaluated by measuring its natural frequency based on equivalent effective length. The method is verified by field tests. The tests results indicate the new method mentioned in this paper is going to largely improve the accuracy of tension force measurement of short length cable.
- 27 January 2021
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
Open AccessAn Accurate Measurement Method for Tension Force of Short Cable by Additional Mass Block
The equivalent effective length parameter is introduced into the vibration equation of short cable; that is, the boundary condition that affects the test accuracy of short cable force is equivalent to the calculated length of cable. By attaching an additional mass block to the cable, new parameters are introduced to identify the tension force. Vibration differential equations are established for cable with and without addition mass block, taking new parameters into account, such as equivalent effective length and added mass. By solving the equations using the RITZ method, the analytical relationship between the natural frequency of cable and equivalent effective length before and after a mass block is added can be developed. It can also develop an analytical method to identify the equivalent effective length depending on whether the added mass block is attached. Then, tension force of short length cable can be evaluated by measuring its natural frequency based on equivalent effective length. The method is verified by field tests. The tests results indicate the new method mentioned in this paper is going to largely improve the accuracy of tension force measurement of short length cable.
- Open Access
- 14 July 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (14) , 4824
Reliability Evaluation of Hinged Slab Bridge Considering Hinge Joints Damage and Member Failure Credibility
The hinged slab bridge is widely used in medium- and small-span bridges because of its simple structure and convenient construction. However, hinge joints damage is the main defect of this kind of bridge, and it is difficult to express the deterministic damage degree of hinge joints in the detection process. A system reliability evaluation method considering fuzzy detection information of hinge joints damage and member failure credibility is proposed in this paper. Firstly, the membership function is used to quantitatively express the fuzzy detection information of hinge joints, and the fuzzy variable is transformed to an equivalent random variable. Secondly, the functional relationship between the transverse distribution coefficient and hinge joints damage is constructed by the modified hinge-jointed plate method and response surface method, and the reliability of the member considering the fuzzy detection information of hinge joints damage is calculated by the first-order second-moment method (FOSM). Then, the failure credibility is introduced to represent the different possibilities of system failure caused by member failure, and a system reliability assessment method of different failure criteria considering member failure credibility is established based on copula theory. Finally, the applicability of the proposed method is verified by taking the reinforced concrete hinged slab bridge as a numerical example.
- 14 July 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (14) , 4824
Open AccessReliability Evaluation of Hinged Slab Bridge Considering Hinge Joints Damage and Member Failure Credibility
The hinged slab bridge is widely used in medium- and small-span bridges because of its simple structure and convenient construction. However, hinge joints damage is the main defect of this kind of bridge, and it is difficult to express the deterministic damage degree of hinge joints in the detection process. A system reliability evaluation method considering fuzzy detection information of hinge joints damage and member failure credibility is proposed in this paper. Firstly, the membership function is used to quantitatively express the fuzzy detection information of hinge joints, and the fuzzy variable is transformed to an equivalent random variable. Secondly, the functional relationship between the transverse distribution coefficient and hinge joints damage is constructed by the modified hinge-jointed plate method and response surface method, and the reliability of the member considering the fuzzy detection information of hinge joints damage is calculated by the first-order second-moment method (FOSM). Then, the failure credibility is introduced to represent the different possibilities of system failure caused by member failure, and a system reliability assessment method of different failure criteria considering member failure credibility is established based on copula theory. Finally, the applicability of the proposed method is verified by taking the reinforced concrete hinged slab bridge as a numerical example.
- Open Access
- 19 February 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (4) , 1399
System Reliability Evaluation of a Bridge Structure Based on Multivariate Copulas and the AHP–EW Method That Considers Multiple Failure Criteria
The system reliability evaluation of a bridge structure is a complicated problem. Previous studies have commonly used approximate estimation methods, such as the wide bounds method and the narrow bounds method, but neither could obtain an accurate result. In recent years, the copula theory has been introduced into the system reliability evaluation, which can obtain more accurate results than the approximate methods. However, most studies simply construct binary copula functions to consider the joint failure of two failure modes. For a complex bridge structure composed of multiple components and failure modes, the joint failure of multiple failure modes needs to be considered. Before evaluating the system reliability, it is necessary to determine the failure criteria of the system. Different failure criteria for simply supported beam bridges have been proposed. However, there is no standard available to determine which failure criterion to choose, and the selection of failure criteria is ambiguous. In this paper, a novel method is proposed to evaluate the system reliability of a simply supported beam bridge by considering multiple failure criteria based on multivariate copulas and the analytic hierarchy process entropy weight (AHP–EW) method. The method first considers multiple failure criteria comprehensively and constructs multivariate copulas for the joint failure of multiple components in a bridge system reliability evaluation. The AHP–EW method is a comprehensive weighting method combining the analytic hierarchy process and entropy weight methods, which is used to establish the hierarchical analysis model between system reliability and multiple failure criteria. By considering the joint failure of multiple failure modes in the system reliability evaluation under a single failure criterion, multivariate copula functions were constructed. In order to verify the applicability of the proposed bridge system reliability method, a simply supported reinforced concrete (RC) hollow slab bridge composed of nine slab segments was selected as the numerical example. The results indicate that the method proposed in this paper could evaluate the bridge system reliability more comprehensively and reasonably.
- 19 February 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (4) , 1399
Open AccessSystem Reliability Evaluation of a Bridge Structure Based on Multivariate Copulas and the AHP–EW Method That Considers Multiple Failure Criteria
The system reliability evaluation of a bridge structure is a complicated problem. Previous studies have commonly used approximate estimation methods, such as the wide bounds method and the narrow bounds method, but neither could obtain an accurate result. In recent years, the copula theory has been introduced into the system reliability evaluation, which can obtain more accurate results than the approximate methods. However, most studies simply construct binary copula functions to consider the joint failure of two failure modes. For a complex bridge structure composed of multiple components and failure modes, the joint failure of multiple failure modes needs to be considered. Before evaluating the system reliability, it is necessary to determine the failure criteria of the system. Different failure criteria for simply supported beam bridges have been proposed. However, there is no standard available to determine which failure criterion to choose, and the selection of failure criteria is ambiguous. In this paper, a novel method is proposed to evaluate the system reliability of a simply supported beam bridge by considering multiple failure criteria based on multivariate copulas and the analytic hierarchy process entropy weight (AHP–EW) method. The method first considers multiple failure criteria comprehensively and constructs multivariate copulas for the joint failure of multiple components in a bridge system reliability evaluation. The AHP–EW method is a comprehensive weighting method combining the analytic hierarchy process and entropy weight methods, which is used to establish the hierarchical analysis model between system reliability and multiple failure criteria. By considering the joint failure of multiple failure modes in the system reliability evaluation under a single failure criterion, multivariate copula functions were constructed. In order to verify the applicability of the proposed bridge system reliability method, a simply supported reinforced concrete (RC) hollow slab bridge composed of nine slab segments was selected as the numerical example. The results indicate that the method proposed in this paper could evaluate the bridge system reliability more comprehensively and reasonably.