Yanhong Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yanhong Ma has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Jie Hong
School of Energy and Power Engineering, Beihang University, Beijing 100191, China
21 shared publications Jie Hong
School of Energy and Power Engineering, Beihang University, Beijing, China
10 shared publications- Yongfeng Wang
Research Institute of Aeroengine, Beihang University, Beijing, China
8 shared publications - Zhefu Yang
Research Institute of Aero-Engine, Beihang University, Beijing 102206, China
7 shared publications - Dayi Zhang
School of Energy and Power Engineering, Beihang University, Beijing 100191, China
6 shared publications - Chao Li
Research Institute of Aero-Engine, Beihang University, Beijing 102206, China
5 shared publications
Latest Publications
- Open Access
Reliability Evaluation Method for Aeroengine Turbine Rotor Assemblies Considering Interaction of Multiple Failure Modes
In complex mechanical systems involving multiple parts and contact interfaces, failure modes are not only statistically correlated but may also interact through underlying physical mechanisms. These interactions, often neglected in current reliability analysis, can lead to significant deviations in failure predictions, especially in rotor systems and actuators. Taking aeroengine turbine rotor assemblies as an example, multiple failure modes, such as wear, fatigue and slip at contact interfaces, affect key mechanical property parameters including assembly preload, cylindrical interference fit and cooling performance. These variations lead to evolving stress/strain and temperature fields with increasing load cycles, thereby inducing physical interactions among different failure modes. This study systematically analyzes the interaction mechanisms among multiple failure modes within a turbine rotor assembly. A mechanics model is established to quantify these interactions and their effects on failure evolution. Furthermore, a time-dependent reliability evaluation method is proposed based on Monte Carlo simulation and the Probability Network Evaluation Technique. A case study illustrates that both continuous-type and trigger-type interactions significantly affect the failure probabilities of wear and low-cycle fatigue. The results emphasize the necessity of accounting for interaction of multi-failure modes to improve the accuracy of failure prediction and enhance the design reliability of turbine rotor assemblies.
Open AccessReliability Evaluation Method for Aeroengine Turbine Rotor Assemblies Considering Interaction of Multiple Failure Modes
In complex mechanical systems involving multiple parts and contact interfaces, failure modes are not only statistically correlated but may also interact through underlying physical mechanisms. These interactions, often neglected in current reliability analysis, can lead to significant deviations in failure predictions, especially in rotor systems and actuators. Taking aeroengine turbine rotor assemblies as an example, multiple failure modes, such as wear, fatigue and slip at contact interfaces, affect key mechanical property parameters including assembly preload, cylindrical interference fit and cooling performance. These variations lead to evolving stress/strain and temperature fields with increasing load cycles, thereby inducing physical interactions among different failure modes. This study systematically analyzes the interaction mechanisms among multiple failure modes within a turbine rotor assembly. A mechanics model is established to quantify these interactions and their effects on failure evolution. Furthermore, a time-dependent reliability evaluation method is proposed based on Monte Carlo simulation and the Probability Network Evaluation Technique. A case study illustrates that both continuous-type and trigger-type interactions significantly affect the failure probabilities of wear and low-cycle fatigue. The results emphasize the necessity of accounting for interaction of multi-failure modes to improve the accuracy of failure prediction and enhance the design reliability of turbine rotor assemblies.
- Open Access
A Novel Evaluation Method for Vibration Coupling of Complex Rotor–Stator Systems in Aeroengines
With the increase in thrust–weight ratio of advanced aeroengines, the rotor and stator often exhibit comparable stiffness characteristics, leading to significant vibration coupling which harms the safety and reliability of operations. However, an effective vibration coupling evaluation method for complex rotor–stator systems is still lacking. This paper proposes the Vibration Coupling Evaluation Factor (VCEF) to quantitatively evaluate the interaction between the rotor and stator within the framework of the linear system. Then a new evaluation procedure is established for the structural optimization during the early design phase and the fault source localization in troubleshooting scenarios in the high-speed rotating machinery. In this paper, two typical rotor–stator systems are studied with the VCEF method: a simplified rotor–stator system is studied numerically to reveal the influence pattern of different parameters, and a complex rotor–stator system is studied numerically and experimentally to examine the validity of the evaluation method. The results show that VCEF can effectively capture rotor–stator vibration coupling. The VCEF curve with rotational speed shows a significant stepped decrease, indicating a significant strengthening of the rotor–stator vibration coupling, which aligns closely with experimental data. This evaluation method quantitatively assesses the degree of rotor–stator vibration coupling by comparing the differences in modal characteristics between the rotor system and the rotor–stator system under the gyroscopic effect. Optimizing rotor–stator stiffness and mass distribution based on VCEF mitigates operational risks in high-speed regimes. This methodology provides engineers with a systematic, quantitative tool to determine when integrated rotor–stator analysis is essential for accurate dynamic prediction and offers broad applicability to aeroengine design and other high-speed rotating machinery.
Open AccessA Novel Evaluation Method for Vibration Coupling of Complex Rotor–Stator Systems in Aeroengines
With the increase in thrust–weight ratio of advanced aeroengines, the rotor and stator often exhibit comparable stiffness characteristics, leading to significant vibration coupling which harms the safety and reliability of operations. However, an effective vibration coupling evaluation method for complex rotor–stator systems is still lacking. This paper proposes the Vibration Coupling Evaluation Factor (VCEF) to quantitatively evaluate the interaction between the rotor and stator within the framework of the linear system. Then a new evaluation procedure is established for the structural optimization during the early design phase and the fault source localization in troubleshooting scenarios in the high-speed rotating machinery. In this paper, two typical rotor–stator systems are studied with the VCEF method: a simplified rotor–stator system is studied numerically to reveal the influence pattern of different parameters, and a complex rotor–stator system is studied numerically and experimentally to examine the validity of the evaluation method. The results show that VCEF can effectively capture rotor–stator vibration coupling. The VCEF curve with rotational speed shows a significant stepped decrease, indicating a significant strengthening of the rotor–stator vibration coupling, which aligns closely with experimental data. This evaluation method quantitatively assesses the degree of rotor–stator vibration coupling by comparing the differences in modal characteristics between the rotor system and the rotor–stator system under the gyroscopic effect. Optimizing rotor–stator stiffness and mass distribution based on VCEF mitigates operational risks in high-speed regimes. This methodology provides engineers with a systematic, quantitative tool to determine when integrated rotor–stator analysis is essential for accurate dynamic prediction and offers broad applicability to aeroengine design and other high-speed rotating machinery.
- Open Access
Research on the Dynamic Behavior of Rotor–Stator Systems Considering Bearing Clearance in Aeroengines
The high-performance aeroengine operates under extreme loads. In engineering practice, the vibration problems caused by stator vibrations have become increasingly prominent, with impacts on the rotor dynamic behavior. This paper takes the rotor–stator system of aeroengines as the analysis object and studies the influence of stator modal vibration on the rotor dynamic behavior. The dynamic model of the rotor–stator system has been established, and the influence of the contact state of cylindrical roller bearings (CRBs) has been analyzed by considering bearing clearance. To precisely capture the transient contact state within the CRBs, a numerical method combining the Newmark-β method with the Event Function has been developed. The numerical calculation results show that the collision effect introduced by the bearing clearance will excite a localized stator mode at the supercritical state, which fundamentally alters the rotor dynamic behavior: generating prominent combination frequencies due to modulation between the rotor rotation and the stator vibration . Moreover, good consistency between the experimental and calculated results has been obtained. This study demonstrates that the stator modal vibration can critically modify rotor dynamic behavior in supercritical operation, leading to potentially hazardous non-synchronous whirl. The integrated model and numerical method provide a robust framework for analyzing complex rotor–stator interactions, offering significant insights for vibration control and fault diagnosis in high-speed rotating machinery.Open AccessResearch on the Dynamic Behavior of Rotor–Stator Systems Considering Bearing Clearance in Aeroengines
The high-performance aeroengine operates under extreme loads. In engineering practice, the vibration problems caused by stator vibrations have become increasingly prominent, with impacts on the rotor dynamic behavior. This paper takes the rotor–stator system of aeroengines as the analysis object and studies the influence of stator modal vibration on the rotor dynamic behavior. The dynamic model of the rotor–stator system has been established, and the influence of the contact state of cylindrical roller bearings (CRBs) has been analyzed by considering bearing clearance. To precisely capture the transient contact state within the CRBs, a numerical method combining the Newmark-β method with the Event Function has been developed. The numerical calculation results show that the collision effect introduced by the bearing clearance will excite a localized stator mode at the supercritical state, which fundamentally alters the rotor dynamic behavior: generating prominent combination frequencies due to modulation between the rotor rotation and the stator vibration . Moreover, good consistency between the experimental and calculated results has been obtained. This study demonstrates that the stator modal vibration can critically modify rotor dynamic behavior in supercritical operation, leading to potentially hazardous non-synchronous whirl. The integrated model and numerical method provide a robust framework for analyzing complex rotor–stator interactions, offering significant insights for vibration control and fault diagnosis in high-speed rotating machinery. - Open Access
Dynamics Study of Multi-Supports Rotor Systems with Bearing Clearance Considering Angular Deflections
Bearing clearance, prevalent in multi-supports rotor systems of aero engines, exerts a significant influence on the dynamics of rotor systems, actuators, and aero engines. The essence of it lies in the complex mechanical effects between the bearing and support. These effects become more complicated when significant relative angular deflections between the bearing and support exist, which is rarely considered in previous studies. In this paper, a model of support structure with bearing clearance considering angular deflections is proposed, and a mechanical model of the multi-supports rotor system with bearing clearance is developed. The dynamic response of the multi-supports rotor system with bearing clearance is investigated by numerical calculation and experimental verification. The results indicate that, in addition to the rotational frequency, remarkable harmonic frequency components occur in the response, which are generated by the relative movement and periodical collision between the bearing and support, and the relative angular deflections between the bearing and support have a significant impact on the amplitude of them; reducing the bearing clearance or increasing the misalignment both leads to a notable increase in the amplitudes of the harmonic frequency components.
Open AccessDynamics Study of Multi-Supports Rotor Systems with Bearing Clearance Considering Angular Deflections
Bearing clearance, prevalent in multi-supports rotor systems of aero engines, exerts a significant influence on the dynamics of rotor systems, actuators, and aero engines. The essence of it lies in the complex mechanical effects between the bearing and support. These effects become more complicated when significant relative angular deflections between the bearing and support exist, which is rarely considered in previous studies. In this paper, a model of support structure with bearing clearance considering angular deflections is proposed, and a mechanical model of the multi-supports rotor system with bearing clearance is developed. The dynamic response of the multi-supports rotor system with bearing clearance is investigated by numerical calculation and experimental verification. The results indicate that, in addition to the rotational frequency, remarkable harmonic frequency components occur in the response, which are generated by the relative movement and periodical collision between the bearing and support, and the relative angular deflections between the bearing and support have a significant impact on the amplitude of them; reducing the bearing clearance or increasing the misalignment both leads to a notable increase in the amplitudes of the harmonic frequency components.
- Open Access
- 26 August 2025
- Published by MDPI AG in Lubricants
- Vol. 13 (9) , 381
Simulation Analysis and Structural Improvements of Oil Return in Main Bearing Chamber of Aero-Engine
Modern advanced aero-engine bearing systems typically exhibit structural and loading characteristics with high DN values. The harsh thermal environment and multi-physics loads under operating conditions render the reliability of bearing structural systems particularly sensitive to lubrication efficiency and bearing chamber temperature. This study performs simulation analyses of oil return processes and their influencing factors in an aero-engine main bearing chamber with complex structural features. The results show two primary causes of reduced scavenging performance. On the one hand, the local low-speed region at the inlet of the scavenge pipe causes some oil to fail to enter the scavenge pipe normally. On the other hand, the air in the bearing chamber is disturbed by the rotation of the rotor, which makes oil enter the oil sump with a tendency to return to the oil collection annulus, thereby causing poor oil return. Furthermore, two structural improvements of the oil sump are proposed. These improvements avoid the disruptive effects of circumferential fluid motion in the oil collection annulus on the pressure and velocity distribution within the bearing chamber, thereby improving scavenging performance.
- 26 August 2025
- Published by MDPI AG in Lubricants
- Vol. 13 (9) , 381
Open AccessSimulation Analysis and Structural Improvements of Oil Return in Main Bearing Chamber of Aero-Engine
Modern advanced aero-engine bearing systems typically exhibit structural and loading characteristics with high DN values. The harsh thermal environment and multi-physics loads under operating conditions render the reliability of bearing structural systems particularly sensitive to lubrication efficiency and bearing chamber temperature. This study performs simulation analyses of oil return processes and their influencing factors in an aero-engine main bearing chamber with complex structural features. The results show two primary causes of reduced scavenging performance. On the one hand, the local low-speed region at the inlet of the scavenge pipe causes some oil to fail to enter the scavenge pipe normally. On the other hand, the air in the bearing chamber is disturbed by the rotation of the rotor, which makes oil enter the oil sump with a tendency to return to the oil collection annulus, thereby causing poor oil return. Furthermore, two structural improvements of the oil sump are proposed. These improvements avoid the disruptive effects of circumferential fluid motion in the oil collection annulus on the pressure and velocity distribution within the bearing chamber, thereby improving scavenging performance.
- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-17
Position-Agnostic Aeroengine Intershaft Bearing Fault Diagnosis via Condition-Guided Multitask Learning
Real-time monitoring and diagnosis of bearing fault conditions are crucial for the stable operation of aero-engines. Recently, bearing fault diagnosis methods based on deep learning have greatly improved the accuracy and efficiency of fault diagnosis. However, they also face some challenges. Firstly, existing fault diagnosis models typically require an input of one or more vibration signals from fixed positions, lacking flexibility in practical applications. Moreover, auxiliary information such as engine operating conditions and sensor positions is often over-looked, especially for aero-engines with more complex operating conditions. To address the aforementioned challenges, this paper investigates inter-shaft bearing fault data collected from aero-engines, verifying the limitations of using fixed-position signal inputs for fault diagnosis through comprehensive experimental analysis. Based on this foundation, a position-agnostic fault diagnosis task is proposed, which inputs vibration signals from any position into the fault model, providing greater flexibility for practical applications. Furthermore, we designed a new condition-guided multi-task supervision model called MTS-Net, which fully utilizes auxiliary information such as rotational speed and sensor positions contained in the dataset, enhancing the generalization ability and prediction accuracy of the fault diagnosis model. Extensive experiments validated the effectiveness of the proposed method, particularly in limited-sample scenarios, where the model’s fault diagnosis classification accuracy can be improved by 6.5%.
- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-17
Position-Agnostic Aeroengine Intershaft Bearing Fault Diagnosis via Condition-Guided Multitask Learning
Real-time monitoring and diagnosis of bearing fault conditions are crucial for the stable operation of aero-engines. Recently, bearing fault diagnosis methods based on deep learning have greatly improved the accuracy and efficiency of fault diagnosis. However, they also face some challenges. Firstly, existing fault diagnosis models typically require an input of one or more vibration signals from fixed positions, lacking flexibility in practical applications. Moreover, auxiliary information such as engine operating conditions and sensor positions is often over-looked, especially for aero-engines with more complex operating conditions. To address the aforementioned challenges, this paper investigates inter-shaft bearing fault data collected from aero-engines, verifying the limitations of using fixed-position signal inputs for fault diagnosis through comprehensive experimental analysis. Based on this foundation, a position-agnostic fault diagnosis task is proposed, which inputs vibration signals from any position into the fault model, providing greater flexibility for practical applications. Furthermore, we designed a new condition-guided multi-task supervision model called MTS-Net, which fully utilizes auxiliary information such as rotational speed and sensor positions contained in the dataset, enhancing the generalization ability and prediction accuracy of the fault diagnosis model. Extensive experiments validated the effectiveness of the proposed method, particularly in limited-sample scenarios, where the model’s fault diagnosis classification accuracy can be improved by 6.5%.
- 30 April 2024
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 112 (11) , 8831-8848
Dynamic performance of a novel tuned vibration absorber with nonlinear friction interfaces
- 30 April 2024
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 112 (11) , 8831-8848
Dynamic performance of a novel tuned vibration absorber with nonlinear friction interfaces
- 2 April 2024
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 112 (10) , 7951-7976
Vibration analysis of rotor systems with bearing clearance using a novel conformal contact model
- 2 April 2024
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 112 (10) , 7951-7976
Vibration analysis of rotor systems with bearing clearance using a novel conformal contact model
- Open Access
Mechanical Property Degradation of Entangled Metallic Wire Materials under Vibration Environment: Experiments and Prediction Models
Entangled metallic wire material (EMWM) can be utilized as a novel elastic element in vibration isolation devices for mechanical actuators. This paper presents a vibration experiment aimed at investigating the degradation behavior of mechanical performance in EMWM under a cyclic compressive environment. An electric vibration testing system, coupled with an isolation structure, is employed to apply compressive loads to the EMWM specimens. Through visual observations and quasi-static compression tests, the variations in geometric morphology and mechanical properties are studied, considering different relative densities and vibrational stress amplitudes. The results indicate a significant reduction in the compressed dimension of the specimens as the number of cycles increases, without any wire fractures or wear. The mechanical properties exhibit an increasing secant modulus and a decreasing loss factor. These variations ultimately lead to a gradual deviation of the vibration characteristics of the isolation structure from its design state, including resonance frequency and transmission rate. To forecast the mechanical property degradation of EMWM, prediction models are proposed, incorporating its dimensions, modulus, and damping by fitting the experiment results. This research provides valuable experimental data and presents an effective method to determine the operational lifespan of vibration isolators utilizing EMWM.
Open AccessMechanical Property Degradation of Entangled Metallic Wire Materials under Vibration Environment: Experiments and Prediction Models
Entangled metallic wire material (EMWM) can be utilized as a novel elastic element in vibration isolation devices for mechanical actuators. This paper presents a vibration experiment aimed at investigating the degradation behavior of mechanical performance in EMWM under a cyclic compressive environment. An electric vibration testing system, coupled with an isolation structure, is employed to apply compressive loads to the EMWM specimens. Through visual observations and quasi-static compression tests, the variations in geometric morphology and mechanical properties are studied, considering different relative densities and vibrational stress amplitudes. The results indicate a significant reduction in the compressed dimension of the specimens as the number of cycles increases, without any wire fractures or wear. The mechanical properties exhibit an increasing secant modulus and a decreasing loss factor. These variations ultimately lead to a gradual deviation of the vibration characteristics of the isolation structure from its design state, including resonance frequency and transmission rate. To forecast the mechanical property degradation of EMWM, prediction models are proposed, incorporating its dimensions, modulus, and damping by fitting the experiment results. This research provides valuable experimental data and presents an effective method to determine the operational lifespan of vibration isolators utilizing EMWM.