Jeremie Renaudier
Research Subjects
Jeremie Renaudier has a total of 155 co-authors. Here are the top co-authors by number of shared publications:
- Amirhossein Ghazisaeidi
Nokia Bell Labs
11 shared publications - Haik Mardoyan
Nokia Bell Labs, Massy, France
10 shared publications - Sylvain Almonacil
Nokia Bell Labs, Massy, France
7 shared publications Fabrice Blache
III-V Lab, a joint Laboratory of Nokia Bell Laboratories, Thales, and CEA LETI, Palaiseau, France
5 shared publications- Filipe Jorge
III-V Lab, a joint Laboratory of Nokia Bell Laboratories, Thales, and CEA LETI, Palaiseau, France
5 shared publications - Agnieszka Konczykowska
III-V Lab, a joint Laboratory of Nokia Bell Laboratories, Thales, and CEA LETI, Palaiseau, France
4 shared publications
Latest Publications
- Open Access
- 13 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6349-6360
Transmission of 300 GBd QAM Signals Over Trans-Oceanic Distances Using Optical Arbitrary Waveform Generation and Measurement (OAWG/OAWM)
To sustain the persistent traffic growth in optical networks, symbol rates are continuously increasing, in particular in long-haul and submarine systems, where efficient exploitation of the installed fiber infrastructure is key. However, while commercial long-haul transceivers already offer symbol rates of 200 GBd, exploring the potential of transmission at symbol rates beyond this landmark still represents a challenge. One of the main difficulties is to reliably generate and analyze high-quality quadrature amplitude modulation (QAM) signals at bandwidths of more than 200 GHz, exceeding the capabilities of available test and measurement instrumentation. In this paper, we demonstrate the potential of high-symbol-rate transmission at 300 GBd over trans-oceanic distances, exploiting the concepts of optical arbitrary waveform generation (OAWG) and optical arbitrary waveform measurement (OAWM) for synthesizing and analyzing the associated data signals. Using dual-polarization probabilistic-constellation-shaped (PCS) 36QAM signals, we achieve net bit rates of 2.45 Tbit/s over 1 815 km. For PCS-16QAM signals, the transmission distance is extended to 9 680 km while supporting a net bit rate of 1.63 Tbit/s. In the back-to-back setup, the net bit rate is increased to 2.88 Tbit/s using 64QAM signals. To the best of our knowledge, our experiments achieve the highest symbol rate so far transmitted over a distance exceeding 100 km. Furthermore, the demonstrated distances for target net bit rates of 1.6 Tbit/s and 2.4 Tbit/s surpass previous demonstrations by more than an order of magnitude.
- 13 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6349-6360
Open AccessTransmission of 300 GBd QAM Signals Over Trans-Oceanic Distances Using Optical Arbitrary Waveform Generation and Measurement (OAWG/OAWM)
To sustain the persistent traffic growth in optical networks, symbol rates are continuously increasing, in particular in long-haul and submarine systems, where efficient exploitation of the installed fiber infrastructure is key. However, while commercial long-haul transceivers already offer symbol rates of 200 GBd, exploring the potential of transmission at symbol rates beyond this landmark still represents a challenge. One of the main difficulties is to reliably generate and analyze high-quality quadrature amplitude modulation (QAM) signals at bandwidths of more than 200 GHz, exceeding the capabilities of available test and measurement instrumentation. In this paper, we demonstrate the potential of high-symbol-rate transmission at 300 GBd over trans-oceanic distances, exploiting the concepts of optical arbitrary waveform generation (OAWG) and optical arbitrary waveform measurement (OAWM) for synthesizing and analyzing the associated data signals. Using dual-polarization probabilistic-constellation-shaped (PCS) 36QAM signals, we achieve net bit rates of 2.45 Tbit/s over 1 815 km. For PCS-16QAM signals, the transmission distance is extended to 9 680 km while supporting a net bit rate of 1.63 Tbit/s. In the back-to-back setup, the net bit rate is increased to 2.88 Tbit/s using 64QAM signals. To the best of our knowledge, our experiments achieve the highest symbol rate so far transmitted over a distance exceeding 100 km. Furthermore, the demonstrated distances for target net bit rates of 1.6 Tbit/s and 2.4 Tbit/s surpass previous demonstrations by more than an order of magnitude.
- Open Access
- 30 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (10) , 7403-7421
InP DHBT 200-GSa/s Large Output Swing AMUX-Driver Using Transimpedance Stage Loading for 200-Gbaud-and-Beyond Optical Transceivers
In this article, we report on the design and characterization of InP-DHBT analog multiplexer (AMUX)-driver integrated circuits (ICs) for next generation $\geq 200$ Gbaud (GBd) metro/long-haul optical transceivers. We show that the transimpedance stage (TIS) loading of the AMUX selecting cell provides superior gain $\times $ bandwidth and linearity performances with respect to the commonly used resistive and cascode loads. Moreover, the driving clock amplitude and tail current of the selecting core are shown to be key parameters for the AMUX-driver design. The AMUX-drivers with TIS loading are fabricated in the III-V Lab’s InP DHBT process, showing up to 200-GSa/s sampling rate, without any support of DSP. At 100 GSa/s and 2.4 Vppd of PAM-4 output swing, the highest AMUX FoM is obtained. To the best of the authors’ knowledge, these are the highest performances reported to date for an AMUX(-driver). Additionally, an AMUX-driver chip is assembled with a TFLN modulator, demonstrating an E/O bandwidth in excess of 85 GHz, while supporting the generation of 100-GBd PAM-4 optical signals, without DSP or active cooling.
- 30 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (10) , 7403-7421
Open AccessInP DHBT 200-GSa/s Large Output Swing AMUX-Driver Using Transimpedance Stage Loading for 200-Gbaud-and-Beyond Optical Transceivers
In this article, we report on the design and characterization of InP-DHBT analog multiplexer (AMUX)-driver integrated circuits (ICs) for next generation $\geq 200$ Gbaud (GBd) metro/long-haul optical transceivers. We show that the transimpedance stage (TIS) loading of the AMUX selecting cell provides superior gain $\times $ bandwidth and linearity performances with respect to the commonly used resistive and cascode loads. Moreover, the driving clock amplitude and tail current of the selecting core are shown to be key parameters for the AMUX-driver design. The AMUX-drivers with TIS loading are fabricated in the III-V Lab’s InP DHBT process, showing up to 200-GSa/s sampling rate, without any support of DSP. At 100 GSa/s and 2.4 Vppd of PAM-4 output swing, the highest AMUX FoM is obtained. To the best of the authors’ knowledge, these are the highest performances reported to date for an AMUX(-driver). Additionally, an AMUX-driver chip is assembled with a TFLN modulator, demonstrating an E/O bandwidth in excess of 85 GHz, while supporting the generation of 100-GBd PAM-4 optical signals, without DSP or active cooling.
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6306-6312
Beyond Terabit/s/λ Nonlinearity-Free Transmission Over the Hollow-Core Fiber
In this paper, we demonstrate the beneficial ultra-low nonlinearity and ultimate-low latency of hollow-core fibers (HCFs) through transmission of 130-GBaud Terabit/s/λ wavelength-division multiplexed (WDM) signals in an optical recirculating loop. A comparative study has been performed by inserting either a ∼1.1-km length of HCF or a matched length of single-mode fiber (SMF) as the fiber under test into the loop. The transmission performance of both dual-polarization 16-ary quadrature amplitude modulation (DP-16QAM) and DP probabilistic constellation shaping 64-ary QAM (DP-PCS-64QAM) are presented. We show that the HCF can accommodate nonlinearity-free transmission for the 130-GBaud Terabit/s/λ signals under a launch power up to 23 dBm (∼13.5 dBm/channel). As such, after 25-loop transmission with a 23-dBm launch power, more than 2-dB signal-to-noise ratio improvement and ∼17.4% higher capacity can be achieved. In the meantime, the >30% lower latency of the HCF is directly validated through the comparison of the power monitoring traces of the SMF-/HCF-based optical recirculating loop. Finally, we perform a field trial of 90.22-GBaud 16QAM transmission over a ∼1.4-km length of deployed HCF cable, confirming the practical applicability of using the HCF for high-capacity low-latency optical transmission.
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (13) , 6306-6312
Beyond Terabit/s/λ Nonlinearity-Free Transmission Over the Hollow-Core Fiber
In this paper, we demonstrate the beneficial ultra-low nonlinearity and ultimate-low latency of hollow-core fibers (HCFs) through transmission of 130-GBaud Terabit/s/λ wavelength-division multiplexed (WDM) signals in an optical recirculating loop. A comparative study has been performed by inserting either a ∼1.1-km length of HCF or a matched length of single-mode fiber (SMF) as the fiber under test into the loop. The transmission performance of both dual-polarization 16-ary quadrature amplitude modulation (DP-16QAM) and DP probabilistic constellation shaping 64-ary QAM (DP-PCS-64QAM) are presented. We show that the HCF can accommodate nonlinearity-free transmission for the 130-GBaud Terabit/s/λ signals under a launch power up to 23 dBm (∼13.5 dBm/channel). As such, after 25-loop transmission with a 23-dBm launch power, more than 2-dB signal-to-noise ratio improvement and ∼17.4% higher capacity can be achieved. In the meantime, the >30% lower latency of the HCF is directly validated through the comparison of the power monitoring traces of the SMF-/HCF-based optical recirculating loop. Finally, we perform a field trial of 90.22-GBaud 16QAM transmission over a ∼1.4-km length of deployed HCF cable, confirming the practical applicability of using the HCF for high-capacity low-latency optical transmission.
- 13 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (4) , 1736-1745
Distributed Coherent Sensing Over Deployed Fibers for Network as a Sensor Applications
We discuss the performance of Coherent-MIMO-DFS over deployed optical networks in various configurations and address technological challenges such as adaptation to various fiber types and disturbance identification. Two different field trial results are exploited, demonstrating the adaptability of our distributed fiber sensing interrogator to the diverse environments that can be encountered in the context of sensing over terrestrial telecommunication networks. We discuss the advantages of extracting the full backscattered Jones matrices using a DFS interrogator. Mechanical events including threats to the infrastructure are localized and identified and different identification methods are discussed. We draw a correspondence between lab measurements and field events based on the type of environment, and finally we present a classification method based on transfer learning with 90 % accuracy.
- 13 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (4) , 1736-1745
Distributed Coherent Sensing Over Deployed Fibers for Network as a Sensor Applications
We discuss the performance of Coherent-MIMO-DFS over deployed optical networks in various configurations and address technological challenges such as adaptation to various fiber types and disturbance identification. Two different field trial results are exploited, demonstrating the adaptability of our distributed fiber sensing interrogator to the diverse environments that can be encountered in the context of sensing over terrestrial telecommunication networks. We discuss the advantages of extracting the full backscattered Jones matrices using a DFS interrogator. Mechanical events including threats to the infrastructure are localized and identified and different identification methods are discussed. We draw a correspondence between lab measurements and field events based on the type of environment, and finally we present a classification method based on transfer learning with 90 % accuracy.
- 18 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (15) , 5182-5189
Shaped Constellation Continuous Variable Quantum Key Distribution: Concepts, Methods and Experimental Validation
Quantum key distribution (QKD) enables the establishment of secret keys between users connected via a channel vulnerable to eavesdropping, with information-theoretic security, that is, independently of the power of a malevolent party [1]. QKD systems based on the encoding of the key information on continuous variables (CV), such as the values of the quadrature components of coherent states [2], [3], present the major advantage that they only require standard telecommunication technology. However, the most general security proofs for CVQKD required until now the use of Gaussian modulation by the transmitter, complicating practical implementations [4]–[6]. Here, we experimentally implement a protocol that allows for arbitrary, Gaussian-like, discrete modulations, whose security is based on a theoretical proof that applies generally to such situations [7]. These modulation formats are compatible with the use of powerful tools of coherent optical telecommunication, allowing our system to reach an estimated performance of tens of megabit per second secret key rates over 25 km
- 18 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (15) , 5182-5189
Shaped Constellation Continuous Variable Quantum Key Distribution: Concepts, Methods and Experimental Validation
Quantum key distribution (QKD) enables the establishment of secret keys between users connected via a channel vulnerable to eavesdropping, with information-theoretic security, that is, independently of the power of a malevolent party [1]. QKD systems based on the encoding of the key information on continuous variables (CV), such as the values of the quadrature components of coherent states [2], [3], present the major advantage that they only require standard telecommunication technology. However, the most general security proofs for CVQKD required until now the use of Gaussian modulation by the transmitter, complicating practical implementations [4]–[6]. Here, we experimentally implement a protocol that allows for arbitrary, Gaussian-like, discrete modulations, whose security is based on a theoretical proof that applies generally to such situations [7]. These modulation formats are compatible with the use of powerful tools of coherent optical telecommunication, allowing our system to reach an estimated performance of tens of megabit per second secret key rates over 25 km
- Open Access
- 12 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (3) , 1618-1633
InP DHBT Linear Modulator Driver With a 3-Vppd PAM-4 Output Swing at 90 GBaud: From Enhanced Transistor Modeling to Integrated Circuit Design
In this article, we report on the modeling, design, and characterization of indium phosphide (InP) double heterojunction bipolar transistor (DHBT) devices and integrated circuits (ICs) for next-generation optical communications. Critical aspects of transistors’ modeling and their influence on the IC design are detailed, as well as the design and characterization of a lumped linear modulator driver featuring a 3-Vppd four-level pulse-amplitude modulation (PAM-4) output swing at 90 GBaud (GBd). In particular, we propose an electromagnetic (EM) simulation-based parasitic extraction method of the DHBT access structures, to refine the DHBT and IC performance prediction accuracy. It is shown to provide a better estimation of a canonical cascode gain and $\mu$ stability factor at millimeter-wave frequencies, as well as a better estimation of the driver IC gain in the 50–110 GHz frequency range. Furthermore, a high-frequency gain boosting (self-peaking) topology, based upon an emitter-degenerated paralleled-transistor cascode configuration, is analyzed using a simplified transistor model and leveraged to enhance the linear driver output-stage gain–bandwidth product with controlled amount of peaking gain. This self-peaking technique is shown to be inherent to cascode structures and can therefore be used with other technologies, with no added design complexity. The driver IC was implemented in a 0.5- $\mu$ m InP-DHBT technology and features a bandwidth well in excess of 110 GHz, with 13 dB of peaking gain at 95 GHz. Besides, it achieves a 9.1-dBm single-ended output power at 1 dB of gain compression and a 2.7% root-mean-square total harmonic distortion (rms-THD) at a 3-Vppd output swing. The driver power consumption is 0.67 W, which is among the lowest in the state of the art and shows a 1.5-GBd driver figure of merit (FoM). To the best of our knowledge, this driver achieves the highest $\geq$ 64 GBd PAM-4 performances reported to date, without digital signal processing (DSP) or postprocessing.
- 12 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (3) , 1618-1633
Open AccessInP DHBT Linear Modulator Driver With a 3-Vppd PAM-4 Output Swing at 90 GBaud: From Enhanced Transistor Modeling to Integrated Circuit Design
In this article, we report on the modeling, design, and characterization of indium phosphide (InP) double heterojunction bipolar transistor (DHBT) devices and integrated circuits (ICs) for next-generation optical communications. Critical aspects of transistors’ modeling and their influence on the IC design are detailed, as well as the design and characterization of a lumped linear modulator driver featuring a 3-Vppd four-level pulse-amplitude modulation (PAM-4) output swing at 90 GBaud (GBd). In particular, we propose an electromagnetic (EM) simulation-based parasitic extraction method of the DHBT access structures, to refine the DHBT and IC performance prediction accuracy. It is shown to provide a better estimation of a canonical cascode gain and $\mu$ stability factor at millimeter-wave frequencies, as well as a better estimation of the driver IC gain in the 50–110 GHz frequency range. Furthermore, a high-frequency gain boosting (self-peaking) topology, based upon an emitter-degenerated paralleled-transistor cascode configuration, is analyzed using a simplified transistor model and leveraged to enhance the linear driver output-stage gain–bandwidth product with controlled amount of peaking gain. This self-peaking technique is shown to be inherent to cascode structures and can therefore be used with other technologies, with no added design complexity. The driver IC was implemented in a 0.5- $\mu$ m InP-DHBT technology and features a bandwidth well in excess of 110 GHz, with 13 dB of peaking gain at 95 GHz. Besides, it achieves a 9.1-dBm single-ended output power at 1 dB of gain compression and a 2.7% root-mean-square total harmonic distortion (rms-THD) at a 3-Vppd output swing. The driver power consumption is 0.67 W, which is among the lowest in the state of the art and shows a 1.5-GBd driver figure of merit (FoM). To the best of our knowledge, this driver achieves the highest $\geq$ 64 GBd PAM-4 performances reported to date, without digital signal processing (DSP) or postprocessing.
- 2 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (12) , 3717-3725
Achievable Capacity of Geostationary-Ground Optical Links
We estimate the capacity of optical links at telecom wavelengths built upon existing terrestrial technologies. We study the impact of molecular absorption while varying the modulation scheme and compare the result with the ultimate capacity achievable in void. We then investigate the impact of atmospheric turbulence and evaluate how much capacity we recover with current mitigation techniques such as adaptive optics, and data coding coupled with delay diversity or data interleaving. We conclude by evaluating the achievable capacity in the presence of molecular absorption and atmospheric turbulence.
- 2 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (12) , 3717-3725
Achievable Capacity of Geostationary-Ground Optical Links
We estimate the capacity of optical links at telecom wavelengths built upon existing terrestrial technologies. We study the impact of molecular absorption while varying the modulation scheme and compare the result with the ultimate capacity achievable in void. We then investigate the impact of atmospheric turbulence and evaluate how much capacity we recover with current mitigation techniques such as adaptive optics, and data coding coupled with delay diversity or data interleaving. We conclude by evaluating the achievable capacity in the presence of molecular absorption and atmospheric turbulence.
- 2 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (12) , 3932-3942
Proof-of-Concept Real-Time Implementation of Interleavers for Optical Satellite Links
Ground-satellite optical links are a promising technology for increasing capacity and security over radio frequency links, while reducing weight and power consumption. However, atmospheric turbulence generates power fadings at the reception terminal. This effect can be mitigated by combining adaptive optics, forward error correction and data interleaving. While adaptive optics has been extensively studied, forward error correction together with long interleaving (e.g., multiple 10 ms) has not yet been demonstrated in this context. In this article, we present a proof of concept of an optical satellite uplink, precompensated by adaptive optics, which leverages a long interleaver in an external memory and operates at 10 Gbps with SFP+ transceivers. We account for the issues associated with real-time implementation and interfacing to a high-speed memory. To validate our proof of concept, we generate time-series for a typical ground to geostationary satellite communication link, using a field-validated simulator. Using these time series, we calculate the required interleaver time as a function of the launch power. Finally, we show the impact of different transmitter pupil diameters and of different wind speed profiles, on the interleaver duration.
- 2 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (12) , 3932-3942
Proof-of-Concept Real-Time Implementation of Interleavers for Optical Satellite Links
Ground-satellite optical links are a promising technology for increasing capacity and security over radio frequency links, while reducing weight and power consumption. However, atmospheric turbulence generates power fadings at the reception terminal. This effect can be mitigated by combining adaptive optics, forward error correction and data interleaving. While adaptive optics has been extensively studied, forward error correction together with long interleaving (e.g., multiple 10 ms) has not yet been demonstrated in this context. In this article, we present a proof of concept of an optical satellite uplink, precompensated by adaptive optics, which leverages a long interleaver in an external memory and operates at 10 Gbps with SFP+ transceivers. We account for the issues associated with real-time implementation and interfacing to a high-speed memory. To validate our proof of concept, we generate time-series for a typical ground to geostationary satellite communication link, using a field-validated simulator. Using these time series, we calculate the required interleaver time as a function of the launch power. Finally, we show the impact of different transmitter pupil diameters and of different wind speed profiles, on the interleaver duration.
- 26 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (12) , 3674-3679
260-GBaud Single-Wavelength Coherent Transmission Over 100-km SSMF Based on Novel Arbitrary Waveform Generator and Thin-Film Niobate I/Q Modulator
In this paper, we demonstrate up to 260-GBaud single-wavelength coherent transmission by employing an optical transmitter based on two wide-bandwidth devices: a novel 260-GS/s arbitrary waveform generator with a 10-dB bandwidth of 90-GHz and a thin-film Lithium Niobate I/Q modulator with a 3-dB bandwidth of 110-GHz. We first assess the performance of our high symbol rate transmitter for generating spectrally efficient Nyquist multilevel modulation format signals at symbol rates up to 210-GBaud with >1.4-Tbps achievable information rates and by using linear digital signal processing only. We achieve up to 1.84-Tbps at 185-GBaud using PCS-64QAM, highlighting the linear behavior of our transmitter for high symbol rate Nyquist signaling. We then switch to dual-polarization QPSK coherent transmission and further increase the symbol rate up to 260-GBaud. Without using nonlinear digital-signal-processing nor advanced inter-symbol-interference mitigation techniques, we successfully transmit 260-GBaud QPSK at 800-Gbps net rate over 100-km of standard single mode fiber.
- 26 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (12) , 3674-3679
260-GBaud Single-Wavelength Coherent Transmission Over 100-km SSMF Based on Novel Arbitrary Waveform Generator and Thin-Film Niobate I/Q Modulator
In this paper, we demonstrate up to 260-GBaud single-wavelength coherent transmission by employing an optical transmitter based on two wide-bandwidth devices: a novel 260-GS/s arbitrary waveform generator with a 10-dB bandwidth of 90-GHz and a thin-film Lithium Niobate I/Q modulator with a 3-dB bandwidth of 110-GHz. We first assess the performance of our high symbol rate transmitter for generating spectrally efficient Nyquist multilevel modulation format signals at symbol rates up to 210-GBaud with >1.4-Tbps achievable information rates and by using linear digital signal processing only. We achieve up to 1.84-Tbps at 185-GBaud using PCS-64QAM, highlighting the linear behavior of our transmitter for high symbol rate Nyquist signaling. We then switch to dual-polarization QPSK coherent transmission and further increase the symbol rate up to 260-GBaud. Without using nonlinear digital-signal-processing nor advanced inter-symbol-interference mitigation techniques, we successfully transmit 260-GBaud QPSK at 800-Gbps net rate over 100-km of standard single mode fiber.
- 1 January 2023
- Published by Optica Publishing Group
- p. W4H.2
Long-haul Transmission of 1 Tb/s Data Rate Channel with Inline Filtering based on 145 GBd Dual Polarization 16QAM
We demonstrate Tb-class long-haul experiment based on 145-GBd signal occupying one 150-GHz slot. We achieve 1.0-Tb/s/λ over 3630-km distance with a spectral efficiency of 6.67-b/s/Hz while accounting for inline filtering from ROADM in transport networks.
- 1 January 2023
- Published by Optica Publishing Group
- p. W4H.2
Long-haul Transmission of 1 Tb/s Data Rate Channel with Inline Filtering based on 145 GBd Dual Polarization 16QAM
We demonstrate Tb-class long-haul experiment based on 145-GBd signal occupying one 150-GHz slot. We achieve 1.0-Tb/s/λ over 3630-km distance with a spectral efficiency of 6.67-b/s/Hz while accounting for inline filtering from ROADM in transport networks.