InP DHBT Linear Modulator Driver With a 3-Vppd PAM-4 Output Swing at 90 GBaud: From Enhanced Transistor Modeling to Integrated Circuit Design
Open Access
- 12 September 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (3) , 1618-1633
Abstract
In this article, we report on the modeling, design, and characterization of indium phosphide (InP) double heterojunction bipolar transistor (DHBT) devices and integrated circuits (ICs) for next-generation optical communications. Critical aspects of transistors’ modeling and their influence on the IC design are detailed, as well as the design and characterization of a lumped linear modulator driver featuring a 3-Vppd four-level pulse-amplitude modulation (PAM-4) output swing at 90 GBaud (GBd). In particular, we propose an electromagnetic (EM) simulation-based parasitic extraction method of the DHBT access structures, to refine the DHBT and IC performance prediction accuracy. It is shown to provide a better estimation of a canonical cascode gain and $\mu$ stability factor at millimeter-wave frequencies, as well as a better estimation of the driver IC gain in the 50–110 GHz frequency range. Furthermore, a high-frequency gain boosting (self-peaking) topology, based upon an emitter-degenerated paralleled-transistor cascode configuration, is analyzed using a simplified transistor model and leveraged to enhance the linear driver output-stage gain–bandwidth product with controlled amount of peaking gain. This self-peaking technique is shown to be inherent to cascode structures and can therefore be used with other technologies, with no added design complexity. The driver IC was implemented in a 0.5- $\mu$ m InP-DHBT technology and features a bandwidth well in excess of 110 GHz, with 13 dB of peaking gain at 95 GHz. Besides, it achieves a 9.1-dBm single-ended output power at 1 dB of gain compression and a 2.7% root-mean-square total harmonic distortion (rms-THD) at a 3-Vppd output swing. The driver power consumption is 0.67 W, which is among the lowest in the state of the art and shows a 1.5-GBd driver figure of merit (FoM). To the best of our knowledge, this driver achieves the highest $\geq$ 64 GBd PAM-4 performances reported to date, without digital signal processing (DSP) or postprocessing.Keywords
Funding Information
- European Commission through the (H2020 ICT 2016-2017, H2020-ICT-2018-2, H2020-ICT-2019-2)
- TWILIGHT projects, which are initiatives of the Photonics Public Private Partnership
This publication has 56 references indexed in Scilit:
- Linear Large-Swing Push–Pull SiGe BiCMOS Drivers for Silicon Photonics ModulatorsIEEE Transactions on Microwave Theory and Techniques, 2017
- A DC-90-GHz 4- $V_{\mathrm{ pp}}$ Modulator Driver in a 0.13- $\mu \text{m}$ SiGe:C BiCMOS ProcessIEEE Transactions on Microwave Theory and Techniques, 2017
- Extreme Speed Power-DAC: Leveraging InP DHBT for Ultimate Capacity Single-Carrier Optical TransmissionsJournal of Lightwave Technology, 2017
- Direct Extraction of InP/GaAsSb/InP DHBT Equivalent-Circuit Elements From $S$-Parameters Measured at Cut-Off and Normal Bias ConditionsIEEE Transactions on Microwave Theory and Techniques, 2015
- Suppression of Parasitic Substrate Modes in Multilayer Integrated CircuitsIEEE Transactions on Electromagnetic Compatibility, 2015
- 0.5 THz Performance of a Type-II DHBT With a Doping-Graded and Constant-Composition GaAsSb BaseIEEE Electron Device Letters, 2013
- A Large-Swing 112-Gb/s Selector-Driver Based on a Differential Distributed Amplifier in InP DHBT TechnologyIEEE Transactions on Microwave Theory and Techniques, 2012
- InP DHBT-Based IC Technology for 100-Gb/s EthernetIEEE Transactions on Electron Devices, 2011
- CausalRLGC($f$) Models for Transmission Lines From Measured $S$ -ParametersIEEE Transactions on Electromagnetic Compatibility, 2009
- G-band (140-220 GHz) and W-band (75-110 GHz) InP DHBT medium power amplifiersIEEE Transactions on Microwave Theory and Techniques, 2005