D. T. Ivadilinova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
D. T. Ivadilinova has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Bolatkhan Khussan
Abylkas Saginov Karaganda Technical University
5 shared publications - Daulet Takhanov
1) Abylkas Saginov Karaganda Technical University, Karaganda 100027, Kazakhstan. 2) Scientific and Technical Center for Industrial Safety LLP, Karaganda 100027
3 shared publications - Aibek Musin
Abylkas Saginov Karaganda Technical University
2 shared publications - Tuyak Issabekv
Development of Mineral Deposits, Abylkas Saginov Karaganda Technical University, Karaganda 100027, Kazakhstan
2 shared publications Zhanar Asanova
Abylkas Saginov Karaganda Tech Univ, Karaganda, Kazakhstan
2 shared publications- Г.м. Жүніс
Abylkas Saginov Karaganda Technical University
2 shared publications
Latest Publications
- 4 November 2026
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 10(258),p. 52-57
CURRENT STATE OF RESEARCH ON THE GEOMECHANICAL CONDITIONS OF ROCK MASSES DURING THE DEEPENING OF OPEN-PIT MINING OPERATIONS
The paper assesses the geomechanical conditions affecting the stability of pit slopes and benches in a deep open pit mine using an iron ore deposit in the Kostanay Region of the Republic of Kazakhstan as a case study. Engineering-geological investigations included deep borehole drilling, geophysical surveys, laboratory testing of the physical and mechanical properties of rocks, and in situ investigation of rock mass fracturing. Based on the obtained data, engineering-geological units and design rock mass strength parameters were determined, and the probability of different bench failure mechanisms was evaluated. The results indicate that the least stable conditions occur on the eastern wall of the pit due to the unfavorable orientation of the major joint system relative to the slope Мақала Қазақстан Республикасының Қостанай облысындағы темір кен орны мысалында терең карьердің борттары мен кемерлерінің орнықтылығының геомеханикалық жағдайларын бағалауға арналған. Зерттеуде инженерлік-геологиялық ізденістердің нәтижелері, оның ішінде терең ұңғымаларды бұрғылау, геофизикалық зерттеулер, тау жыныстарының физикалық-механикалық қасиеттерін зертханалық анықтау және жартас массивінің жарықшақтылығын зерттеу қарастырылған. Статистикалық өңдеу нәтижесінде алты инженерлік-геологиялық элемент бөлініп, массивтің есептік беріктік сипаттамалары анықталды және карьердің сегіз учаскесі бойынша кемер деформацияларының пайда болу ықтималдығы бағаланды. Зерттеу нәтижелері карьердің шығыс бортында жарықшақтардың құлау бұрышы жобалық еңіс бұрышымен сәйкес келуіне байланысты орнықтылықтың ең қолайсыз жағдайлары қалыптасатынын көрсетті Статья посвящена оценке геомеханических условий устойчивости бортов и уступов глубокого карьера на примере железорудного месторождения, расположенного в Костанайской области Республики Казахстан. Представлены результаты инженерно-геологических исследований, включающих бурение глубоких скважин, геофизические исследования, лабораторное определение физико-механических свойств пород и изучение трещиноватости массива. На основе статистической обработки выделены шесть инженерно-геологических элементов, определены расчетные прочностные характеристики массива и выполнена оценка вероятности развития деформаций уступов на восьми участках карьера. Установлено, что наиболее неблагоприятные условия устойчивости характерны для восточного борта карьера вследствие совпадения угла падения основной системы трещин с проектным углом откоса
- 4 November 2026
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 10(258),p. 52-57
CURRENT STATE OF RESEARCH ON THE GEOMECHANICAL CONDITIONS OF ROCK MASSES DURING THE DEEPENING OF OPEN-PIT MINING OPERATIONS
The paper assesses the geomechanical conditions affecting the stability of pit slopes and benches in a deep open pit mine using an iron ore deposit in the Kostanay Region of the Republic of Kazakhstan as a case study. Engineering-geological investigations included deep borehole drilling, geophysical surveys, laboratory testing of the physical and mechanical properties of rocks, and in situ investigation of rock mass fracturing. Based on the obtained data, engineering-geological units and design rock mass strength parameters were determined, and the probability of different bench failure mechanisms was evaluated. The results indicate that the least stable conditions occur on the eastern wall of the pit due to the unfavorable orientation of the major joint system relative to the slope Мақала Қазақстан Республикасының Қостанай облысындағы темір кен орны мысалында терең карьердің борттары мен кемерлерінің орнықтылығының геомеханикалық жағдайларын бағалауға арналған. Зерттеуде инженерлік-геологиялық ізденістердің нәтижелері, оның ішінде терең ұңғымаларды бұрғылау, геофизикалық зерттеулер, тау жыныстарының физикалық-механикалық қасиеттерін зертханалық анықтау және жартас массивінің жарықшақтылығын зерттеу қарастырылған. Статистикалық өңдеу нәтижесінде алты инженерлік-геологиялық элемент бөлініп, массивтің есептік беріктік сипаттамалары анықталды және карьердің сегіз учаскесі бойынша кемер деформацияларының пайда болу ықтималдығы бағаланды. Зерттеу нәтижелері карьердің шығыс бортында жарықшақтардың құлау бұрышы жобалық еңіс бұрышымен сәйкес келуіне байланысты орнықтылықтың ең қолайсыз жағдайлары қалыптасатынын көрсетті Статья посвящена оценке геомеханических условий устойчивости бортов и уступов глубокого карьера на примере железорудного месторождения, расположенного в Костанайской области Республики Казахстан. Представлены результаты инженерно-геологических исследований, включающих бурение глубоких скважин, геофизические исследования, лабораторное определение физико-механических свойств пород и изучение трещиноватости массива. На основе статистической обработки выделены шесть инженерно-геологических элементов, определены расчетные прочностные характеристики массива и выполнена оценка вероятности развития деформаций уступов на восьми участках карьера. Установлено, что наиболее неблагоприятные условия устойчивости характерны для восточного борта карьера вследствие совпадения угла падения основной системы трещин с проектным углом откоса
- 3 December 2025
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 11(247),p. 26-31
ANALYSIS OF RESEARCH ON BLASTING OPERATIONS IN THE PREPARATION OF WATER-FILLED OVERBURDEN BLOCKS IN OPEN-CUT MINES
The article examines the problems of rock mass preparation during stripping operations in open-pit mines in conditions of waterlogging. It provides an overview of the basin’s geological characteristics, regulatory and methodological documents for drilling and blasting operations, and actual consumption rates of explosives. The impact of waterlogging on slope stability, equipment productivity, and the economics of stripping operations is analyzed. Three groups of measures to reduce waterlogging are described : general quarry, local, and process; surface, underground, and combined drainage methods are considered. Particular attention is paid to preliminary contour blasting as a local method for creating drainage zones. A conclusion is drawn regarding the need for systematic research into the conditions for applying local and quarry measures to improve the efficiency and safety of blasting operations in waterlogged massifs Тау жыныстарының сулануы жағдайында аршу жұмыстарын жүргізу кезінде тау-кен массасын дайындау мәселелері қарастырылды. Бассейннің геологиялық сипаттамасы, бұрғылау-жару жұмыстары бойынша нормативтік құжаттарға және жарылғыш заттарды тұтынудың нақты көрсеткіштеріне шолу берілген. Суланудың беткейлердің тұрақтылығына, техниканың өнімділігіне және аршу жұмыстарының экономикасына әсері талданды. Су тасқынын азайту жөніндегі іс-шаралардың үш тобы сипатталған: жалпы мансаптық, жергілікті және процестік; жер үсті, жерасты және аралас құрғату әдістері қарастырылған. Дренаждық аймақтарды құрудың жергілікті әдісі ретінде алдын-ала контурлық жарылысқа назар аударылды, су басқан массивтердегі жарылыс жұмыстарының тиімділігі мен қауіпсіздігін арттыру үшін жергілікті және мансаптық шараларды қолдану жағдайларын зерттеу қажеттілігі туралы қорытынды жасалды Рассмотрены проблемы подготовки горной массы при ведении вскрышных работ на разрезах в условиях обводненности пород. Приведен обзор геологической характеристики бассейна, нормативно-методических документов по буровзрывным работам и фактических показателей расхода взрывчатых веществ. Проанализировано влияние обводненности на устойчивость откосов, производительность техники и экономику вскрышных работ. Описаны три группы мероприятий по снижению обводненности: общекарьерные, локальные и процессные; рассмотрены поверхностный, подземный и комбинированный способы осушения. Особое внимание уделено предварительному контурному взрыванию как локальному методу создания дренажных зон, сделан вывод о необходимости системных исследований условий применения локальных и карьерных мероприятий для повышения эффективности и безопасности взрывных работ в обводненных массивах
- 3 December 2025
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 11(247),p. 26-31
ANALYSIS OF RESEARCH ON BLASTING OPERATIONS IN THE PREPARATION OF WATER-FILLED OVERBURDEN BLOCKS IN OPEN-CUT MINES
The article examines the problems of rock mass preparation during stripping operations in open-pit mines in conditions of waterlogging. It provides an overview of the basin’s geological characteristics, regulatory and methodological documents for drilling and blasting operations, and actual consumption rates of explosives. The impact of waterlogging on slope stability, equipment productivity, and the economics of stripping operations is analyzed. Three groups of measures to reduce waterlogging are described : general quarry, local, and process; surface, underground, and combined drainage methods are considered. Particular attention is paid to preliminary contour blasting as a local method for creating drainage zones. A conclusion is drawn regarding the need for systematic research into the conditions for applying local and quarry measures to improve the efficiency and safety of blasting operations in waterlogged massifs Тау жыныстарының сулануы жағдайында аршу жұмыстарын жүргізу кезінде тау-кен массасын дайындау мәселелері қарастырылды. Бассейннің геологиялық сипаттамасы, бұрғылау-жару жұмыстары бойынша нормативтік құжаттарға және жарылғыш заттарды тұтынудың нақты көрсеткіштеріне шолу берілген. Суланудың беткейлердің тұрақтылығына, техниканың өнімділігіне және аршу жұмыстарының экономикасына әсері талданды. Су тасқынын азайту жөніндегі іс-шаралардың үш тобы сипатталған: жалпы мансаптық, жергілікті және процестік; жер үсті, жерасты және аралас құрғату әдістері қарастырылған. Дренаждық аймақтарды құрудың жергілікті әдісі ретінде алдын-ала контурлық жарылысқа назар аударылды, су басқан массивтердегі жарылыс жұмыстарының тиімділігі мен қауіпсіздігін арттыру үшін жергілікті және мансаптық шараларды қолдану жағдайларын зерттеу қажеттілігі туралы қорытынды жасалды Рассмотрены проблемы подготовки горной массы при ведении вскрышных работ на разрезах в условиях обводненности пород. Приведен обзор геологической характеристики бассейна, нормативно-методических документов по буровзрывным работам и фактических показателей расхода взрывчатых веществ. Проанализировано влияние обводненности на устойчивость откосов, производительность техники и экономику вскрышных работ. Описаны три группы мероприятий по снижению обводненности: общекарьерные, локальные и процессные; рассмотрены поверхностный, подземный и комбинированный способы осушения. Особое внимание уделено предварительному контурному взрыванию как локальному методу создания дренажных зон, сделан вывод о необходимости системных исследований условий применения локальных и карьерных мероприятий для повышения эффективности и безопасности взрывных работ в обводненных массивах
- Open Access
- 1 September 2025
- Published by Ital Publication in Civil Engineering Journal
- Vol. 11 (9) , 3758-3781
Evaluating Rock Mass Quality and Critical Depth for Rockburst Hazard in Deep Mines
This study investigates the geomechanical behavior of the rock mass at the Zhayssan mine in Kazakhstan, focusing on improving the safety of deep mining operations. The objective is to forecast the working strength of rock masses and assess the associated rockburst risks, especially given the limited existing data on the mechanical properties of the site’s rocks. To achieve this, we conducted comprehensive laboratory tests to determine rock strength characteristics, brittleness, and elastic energy accumulation capacity. We analyzed these data using the Rock Quality Designation (RQD) indicator and constructed a simplified geomechanical model of the deposit. Our findings reveal that rock mass quality improves with depth, as indicated by higher RQD values and reduced fracturing intensity; however, this improvement coincides with an increased risk of dynamic rock pressure events, particularly beyond the analytically estimated critical depth of approximately 400 meters. The study’s novelty lies in its integration of local testing data with comparative regional data, allowing for a more robust preliminary risk assessment despite limited local measurements. As promising directions, the paper suggests further laboratory and field research to refine methods for forecasting the strength and stability of mine workings.
- 1 September 2025
- Published by Ital Publication in Civil Engineering Journal
- Vol. 11 (9) , 3758-3781
Open AccessEvaluating Rock Mass Quality and Critical Depth for Rockburst Hazard in Deep Mines
This study investigates the geomechanical behavior of the rock mass at the Zhayssan mine in Kazakhstan, focusing on improving the safety of deep mining operations. The objective is to forecast the working strength of rock masses and assess the associated rockburst risks, especially given the limited existing data on the mechanical properties of the site’s rocks. To achieve this, we conducted comprehensive laboratory tests to determine rock strength characteristics, brittleness, and elastic energy accumulation capacity. We analyzed these data using the Rock Quality Designation (RQD) indicator and constructed a simplified geomechanical model of the deposit. Our findings reveal that rock mass quality improves with depth, as indicated by higher RQD values and reduced fracturing intensity; however, this improvement coincides with an increased risk of dynamic rock pressure events, particularly beyond the analytically estimated critical depth of approximately 400 meters. The study’s novelty lies in its integration of local testing data with comparative regional data, allowing for a more robust preliminary risk assessment despite limited local measurements. As promising directions, the paper suggests further laboratory and field research to refine methods for forecasting the strength and stability of mine workings.
- Open Access
- 2 May 2025
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 4(240),p. 4-10
КЕНОРЫНДАРДЫ ЖЕРАСТЫ ҚАЗУҒА КӨШКЕНДЕ КЕНДЕ ӨЗДІГІНЕН ҚҰЛАТУ ЖҮЙЕСІНІҢ ӘЛЕМДІК ТӘЖІРИБЕНІҢ ТАЛДАУЫ
Мақалада кенорындарды жерасты игеру технологиясын таңдау проблемасына нарықтық көзқарас, кенорындарды игеру қарқындылығын арттыру, пайдалы компоненттері аз кенорындарын игеруге арзан технологияларын іздеу сұрақтары көрсетілген. Оған қоса күрделі және төмен сұрыпты кен денелерін тиімді игеру, кенорындардың қорларын ашық тәсілмен қазғаннан кейін жерасты қазу мүмкіндіктерін іздеу жолдарына талдау жүргізілді. Әлемдік тәжірибе көрсетіп отырғандай, кеннің өздігінен құлауы бар жүйенің қуатты кен орындарын игеру кезінде осы талаптарға барынша сәйкес келеді. Мақалада белгілі бір жағдайларда кенді құлату арқылы жүйелерді қолдану мүмкіндігін негіздеу бойынша шетелдік компаниялардың тәжірибелеріне көңіл бөлінеді. Жүргізілген зерттеулер мен алынған деректерді талдау нәтижесінде өздігінен қопарылатын қақпақ жүйелерін тау-кен өнеркәсібінде қолдану экономикалық көрсеткіштерінің артықшылықтары көрсетілген The article considers the issues of choosing a technology for underground mining of ore deposits from a market point of view, increasing the intensity of mining, developing deposits with a low content of useful components, and searching for cheap technologies for mining. It also analyzes the ways of efficient development of low-grade ore bodies, and searches for opportunities for underground mining after opening deposits by open-pit mining. World experience shows that the self-caving system of ore at powerful ore deposits best meets these requirements. The article focuses on the experience of foreign companies in substantiating the possibility of using systems with self-caving of ore. The results of the studies and the analysis of the data obtained make it possible to determine the economic advantages of using self-caving systems in the mining industry В статье рассматриваются вопросы выбора технологии подземной разработки рудных месторождений с рыночной точки зрения, увеличения интенсивности разработки месторождений, разработки месторождений с низким содержанием полезных компонентов, поиска дешевых технологий для добычи полезных ископаемых. Также проводится анализ путей эффективной разработки низкосортных рудных тел, поиск возможностей подземной разработки после вскрытия месторождений открытым способом. Мировой опыт показывает, что система самообрушения руды на мощных рудных месторождениях наиболее соответствует этим требованиям. В статье уделяется внимание опыту зарубежных компаний по обоснованию возможности применения систем с самообрушением руды. Результаты проведенных исследований и анализ полученных данных дают возможность определить экономические преимущества использования систем самообрушения в горнодобывающей промышленности
- 2 May 2025
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 4(240),p. 4-10
Open AccessКЕНОРЫНДАРДЫ ЖЕРАСТЫ ҚАЗУҒА КӨШКЕНДЕ КЕНДЕ ӨЗДІГІНЕН ҚҰЛАТУ ЖҮЙЕСІНІҢ ӘЛЕМДІК ТӘЖІРИБЕНІҢ ТАЛДАУЫ
Мақалада кенорындарды жерасты игеру технологиясын таңдау проблемасына нарықтық көзқарас, кенорындарды игеру қарқындылығын арттыру, пайдалы компоненттері аз кенорындарын игеруге арзан технологияларын іздеу сұрақтары көрсетілген. Оған қоса күрделі және төмен сұрыпты кен денелерін тиімді игеру, кенорындардың қорларын ашық тәсілмен қазғаннан кейін жерасты қазу мүмкіндіктерін іздеу жолдарына талдау жүргізілді. Әлемдік тәжірибе көрсетіп отырғандай, кеннің өздігінен құлауы бар жүйенің қуатты кен орындарын игеру кезінде осы талаптарға барынша сәйкес келеді. Мақалада белгілі бір жағдайларда кенді құлату арқылы жүйелерді қолдану мүмкіндігін негіздеу бойынша шетелдік компаниялардың тәжірибелеріне көңіл бөлінеді. Жүргізілген зерттеулер мен алынған деректерді талдау нәтижесінде өздігінен қопарылатын қақпақ жүйелерін тау-кен өнеркәсібінде қолдану экономикалық көрсеткіштерінің артықшылықтары көрсетілген The article considers the issues of choosing a technology for underground mining of ore deposits from a market point of view, increasing the intensity of mining, developing deposits with a low content of useful components, and searching for cheap technologies for mining. It also analyzes the ways of efficient development of low-grade ore bodies, and searches for opportunities for underground mining after opening deposits by open-pit mining. World experience shows that the self-caving system of ore at powerful ore deposits best meets these requirements. The article focuses on the experience of foreign companies in substantiating the possibility of using systems with self-caving of ore. The results of the studies and the analysis of the data obtained make it possible to determine the economic advantages of using self-caving systems in the mining industry В статье рассматриваются вопросы выбора технологии подземной разработки рудных месторождений с рыночной точки зрения, увеличения интенсивности разработки месторождений, разработки месторождений с низким содержанием полезных компонентов, поиска дешевых технологий для добычи полезных ископаемых. Также проводится анализ путей эффективной разработки низкосортных рудных тел, поиск возможностей подземной разработки после вскрытия месторождений открытым способом. Мировой опыт показывает, что система самообрушения руды на мощных рудных месторождениях наиболее соответствует этим требованиям. В статье уделяется внимание опыту зарубежных компаний по обоснованию возможности применения систем с самообрушением руды. Результаты проведенных исследований и анализ полученных данных дают возможность определить экономические преимущества использования систем самообрушения в горнодобывающей промышленности
- 30 March 2025
- Published by Dnipro University of Technology in Mining of Mineral Deposits
- Vol. 19 (1) , 1-12
Identifying rational locations for field mine workings in the zone influenced by mined-out space during repeated mining of pillars
Purpose. The research aims to study the influence of bearing pressure from the barrier pillar on the field drift in order to determine the rational locations for placing field mine workings in the zone influenced by repeated mining at the Zhomart Mine of the Zhaman-Aybat field. Methods. Research includes an analysis of the results of mine studies conducted on the basis of instrumental measurements of actual parameters of the mining system structural elements, processing of multi-year statistical data on monitoring of the rock mass state, as well as modeling using Rocscience software to determine the stress-strain state of the rock mass. The actual physical-mechanical properties of the ores and host rocks of the Zhaman-Aybat field are used for modeling. Findings. The research makes it possible to determine the parameters of the field conveyor drift rational location relative to the protective pillar and the mined-out space. It is substantiated that the field conveyor drift should be designed not less than -30 m deeper than the bottom of the mined-out deposit 4-1 and at a distance of -70 m from the protective pillar boundary. The maximum stresses σmax acting on the contour of the field conveyor drift when it is located at different points are calculated. Originality. The dependence of the change in maximum stresses acting on the contour of the field conveyor drift on its location relative to the protective pillar has been found, which makes it possible the rock mass geomechanical state to be assessed in the form of a model. Practical implications. The mine surveys and numerical experimental studies have provided a new solution to an important scientific problem related to predicting the geomechanical state of the rock mass and ensuring the stability of mine workings adjacent to the mined-out space. The research results can be used in designing repeated mining operations and predicting the geo-mechanical state of the rock mass in order to ensure safe mining operations when driving preparatory workings.
- 30 March 2025
- Published by Dnipro University of Technology in Mining of Mineral Deposits
- Vol. 19 (1) , 1-12
Identifying rational locations for field mine workings in the zone influenced by mined-out space during repeated mining of pillars
Purpose. The research aims to study the influence of bearing pressure from the barrier pillar on the field drift in order to determine the rational locations for placing field mine workings in the zone influenced by repeated mining at the Zhomart Mine of the Zhaman-Aybat field. Methods. Research includes an analysis of the results of mine studies conducted on the basis of instrumental measurements of actual parameters of the mining system structural elements, processing of multi-year statistical data on monitoring of the rock mass state, as well as modeling using Rocscience software to determine the stress-strain state of the rock mass. The actual physical-mechanical properties of the ores and host rocks of the Zhaman-Aybat field are used for modeling. Findings. The research makes it possible to determine the parameters of the field conveyor drift rational location relative to the protective pillar and the mined-out space. It is substantiated that the field conveyor drift should be designed not less than -30 m deeper than the bottom of the mined-out deposit 4-1 and at a distance of -70 m from the protective pillar boundary. The maximum stresses σmax acting on the contour of the field conveyor drift when it is located at different points are calculated. Originality. The dependence of the change in maximum stresses acting on the contour of the field conveyor drift on its location relative to the protective pillar has been found, which makes it possible the rock mass geomechanical state to be assessed in the form of a model. Practical implications. The mine surveys and numerical experimental studies have provided a new solution to an important scientific problem related to predicting the geomechanical state of the rock mass and ensuring the stability of mine workings adjacent to the mined-out space. The research results can be used in designing repeated mining operations and predicting the geo-mechanical state of the rock mass in order to ensure safe mining operations when driving preparatory workings.
- 27 December 2024
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 12(236),p. 27-33
SUBSTANTIATING INTER-CHAMBER PILLAR PARAMATERS WHEN DEVELOPING INCLINED BEDDING
The article deals with the development of a technological flowchart of inclined deposits with the angle of incidence of 20-35 degrees by the example of the Zhilandy deposit. The values of the main compressive and tensile stresses were determined depending on the mining depth. The parameters of barrier and inter-chamber pillars were calculated taking into account the depth of development, the thickness and the ore deposit angle of incidence, the complexity of the mining and geological conditions of development, the physical and mechanical properties of rocks, fracturing and the structure of the enclosing rocks. The permissible parameters of the stope and the inter-chamber pillar were determined depending on the angle of occurrence. It was established that an inter-chamber pillar of a classical vertical shape as permissible only if the angle of incidence of the ore body was within 25 degrees; in the other cases, the rock massif is unstable and the probability of collapse of the inter-chamber pillar is very high Мақала жыланды кен орнының мысалында 20-35 градус құлау бұрышы бар көлбеу кен орындарын өңдеудің технологиялық схемасын әзірлеуге арналған. Негізгі қысу және созылу кернеулерінің шамалары жұмыс тереңдігіне байланысты анықталады. Кен орнының игеру тереңдігін, қуаты мен құлау бұрышын, игерудің тау-кен-геологиялық жағдайларының күрделілігін, тау жыныстарының физикалық-механикалық қасиеттерін, жарықтар мен сыйымды жыныстардың құрылысын ескере отырып, тосқауыл және камерааралық бүтіндіктердің параметрлерін есептеу жүзеге асырылды. Тазарту камерасының және камерааралық тұтастықтың рұқсат етілген параметрлері пайда болу бұрышына байланысты анықталды. Классикалық тік форманың камералық тұтастығы кен денесінің құлау бұрышы 25 градусқа дейін болған жағдайда ғана рұқсат етілетіні анықталды, қалған жағдайларда тау жотасы тұрақты емес және камералық тұтастықтың құлау ықтималдығы өте жоғары Статья посвящена разработке технологической схемы отработки наклонных залежей с углом падения 20-35 градусов на примере Жиландинского месторождения. Определены величины главных сжимающих и растягивающих напряжений в зависимости от глубины отработки. Осуществлен расчет параметров барьерных и междукамерных целиков с учетом глубины разработки, мощности и угла падения рудной залежи, сложности горно-геологических условий разработки, физико-механических свойств пород, трещиноватости и строения вмещающих пород. Определены допустимые параметры очистной камеры и междукамерного целика в зависимости от угла залегания. Установлено, что междукамерный целик классической вертикальной формы допустим только в случае, если угол падения рудного тела находится в пределах до 25 градусов, в остальных случаях горный массив не устойчив и вероятность обрушения междукамерного целика весьма велика
- 27 December 2024
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 12(236),p. 27-33
SUBSTANTIATING INTER-CHAMBER PILLAR PARAMATERS WHEN DEVELOPING INCLINED BEDDING
The article deals with the development of a technological flowchart of inclined deposits with the angle of incidence of 20-35 degrees by the example of the Zhilandy deposit. The values of the main compressive and tensile stresses were determined depending on the mining depth. The parameters of barrier and inter-chamber pillars were calculated taking into account the depth of development, the thickness and the ore deposit angle of incidence, the complexity of the mining and geological conditions of development, the physical and mechanical properties of rocks, fracturing and the structure of the enclosing rocks. The permissible parameters of the stope and the inter-chamber pillar were determined depending on the angle of occurrence. It was established that an inter-chamber pillar of a classical vertical shape as permissible only if the angle of incidence of the ore body was within 25 degrees; in the other cases, the rock massif is unstable and the probability of collapse of the inter-chamber pillar is very high Мақала жыланды кен орнының мысалында 20-35 градус құлау бұрышы бар көлбеу кен орындарын өңдеудің технологиялық схемасын әзірлеуге арналған. Негізгі қысу және созылу кернеулерінің шамалары жұмыс тереңдігіне байланысты анықталады. Кен орнының игеру тереңдігін, қуаты мен құлау бұрышын, игерудің тау-кен-геологиялық жағдайларының күрделілігін, тау жыныстарының физикалық-механикалық қасиеттерін, жарықтар мен сыйымды жыныстардың құрылысын ескере отырып, тосқауыл және камерааралық бүтіндіктердің параметрлерін есептеу жүзеге асырылды. Тазарту камерасының және камерааралық тұтастықтың рұқсат етілген параметрлері пайда болу бұрышына байланысты анықталды. Классикалық тік форманың камералық тұтастығы кен денесінің құлау бұрышы 25 градусқа дейін болған жағдайда ғана рұқсат етілетіні анықталды, қалған жағдайларда тау жотасы тұрақты емес және камералық тұтастықтың құлау ықтималдығы өте жоғары Статья посвящена разработке технологической схемы отработки наклонных залежей с углом падения 20-35 градусов на примере Жиландинского месторождения. Определены величины главных сжимающих и растягивающих напряжений в зависимости от глубины отработки. Осуществлен расчет параметров барьерных и междукамерных целиков с учетом глубины разработки, мощности и угла падения рудной залежи, сложности горно-геологических условий разработки, физико-механических свойств пород, трещиноватости и строения вмещающих пород. Определены допустимые параметры очистной камеры и междукамерного целика в зависимости от угла залегания. Установлено, что междукамерный целик классической вертикальной формы допустим только в случае, если угол падения рудного тела находится в пределах до 25 градусов, в остальных случаях горный массив не устойчив и вероятность обрушения междукамерного целика весьма велика
- 30 June 2024
- Published by Dnipro University of Technology in Mining of Mineral Deposits
- Vol. 18 (2) , 18-27
Ore dilution control when mining low-thickness ore bodies using a system of sublevel drifts
Purpose. The research is aimed at substantiating the optimal parameters of blast-hole ore breaking to reduce the rock mass destruction when mining low-thickness vein deposits using the mining system of sublevel drifts (SD). The focus is on analyzing the impact of blasting on the out-contour rock mass during the blast-hole breaking process. Methods. The three-dimensional block model is constructed using rating classifications of rocks based on studying their strength properties and structural peculiarities. The inelastic deformation zones around the stoping extraction are determined by numerical analysis using the finite element method in 2D formulation. Experimental blasts are assessed by varying the blast-hole drilling scheme depending on the stability rating. Findings. During the experimental-industrial tests, rational blast-hole drilling schemes have been substantiated, contributing to maintaining the stability of the host rocks when mining low-thickness veins. Originality. Effective methods for reducing the ore dilution have been substantiated, which take into account not only the strength properties and structural peculiarities of rocks, but also their seismic impact from blasting on the out-contour rock mass stability when mining low-thickness deposits using a system of sublevel drifts. Practical implications. Practical significance is in the possibility of minimizing the percentage of mineral dilution when mining low-thickness ore bodies using a system of sublevel drifts, which can significantly reduce the cost of mined minerals by reducing ore losses caused by the rock mass destruction during mining operations.
- 30 June 2024
- Published by Dnipro University of Technology in Mining of Mineral Deposits
- Vol. 18 (2) , 18-27
Ore dilution control when mining low-thickness ore bodies using a system of sublevel drifts
Purpose. The research is aimed at substantiating the optimal parameters of blast-hole ore breaking to reduce the rock mass destruction when mining low-thickness vein deposits using the mining system of sublevel drifts (SD). The focus is on analyzing the impact of blasting on the out-contour rock mass during the blast-hole breaking process. Methods. The three-dimensional block model is constructed using rating classifications of rocks based on studying their strength properties and structural peculiarities. The inelastic deformation zones around the stoping extraction are determined by numerical analysis using the finite element method in 2D formulation. Experimental blasts are assessed by varying the blast-hole drilling scheme depending on the stability rating. Findings. During the experimental-industrial tests, rational blast-hole drilling schemes have been substantiated, contributing to maintaining the stability of the host rocks when mining low-thickness veins. Originality. Effective methods for reducing the ore dilution have been substantiated, which take into account not only the strength properties and structural peculiarities of rocks, but also their seismic impact from blasting on the out-contour rock mass stability when mining low-thickness deposits using a system of sublevel drifts. Practical implications. Practical significance is in the possibility of minimizing the percentage of mineral dilution when mining low-thickness ore bodies using a system of sublevel drifts, which can significantly reduce the cost of mined minerals by reducing ore losses caused by the rock mass destruction during mining operations.
- 8 August 2023
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 7(219),p. 32-38
Formation of the stability of the sides during drilling and blasting operations at the Kushmurunskoye field
The article is devoted to the study of the seismic effect of the explosion, the stability of the conditions of the quarry with the initial mining geological conditions and the parameters of drilling and blasting operations. On the basis of analytical methods, the calculation and analysis of the seismic stability of the rocks of the deposit was carried out. Also, data on the seismic effect of the explosion on the mass near the site of the explosion were obtained using instrumental measurements of the impact of the explosion in the quarry. Based on the results of measurements and calculations, rational parameters of drilling and blasting operations on the marginal contour of the quarry were proposed. As a result of the conducted research, the seismic coefficients of the ore Massif were determined. The lowest shear rate was determined for the ores of the Kusmurun deposit Статья посвящена изучению сейсмического воздействия взрывных работ на устойчивость карьерных уступов с учетом исходных горно-геологических условий и параметров буровзрывных работ. На основе аналитических методов был проведен расчет и анализ сейсмостойкости горных пород месторождения. Также были получены данные о сейсмическом воздействии взрывных работ на массив вблизи источника с помощью инструментальных измерений воздействия взрывов в карьере. На основании результатов измерений и расчетов были предложены рациональные параметры буровзрывных работ в предельном контуре карьера. В результате выполненных исследований определены сейсмические коэффициенты массива горных пород. Установлена минимальная скорость сдвижения для горных пород Кушмурунского месторождения
- 8 August 2023
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 7(219),p. 32-38
Formation of the stability of the sides during drilling and blasting operations at the Kushmurunskoye field
The article is devoted to the study of the seismic effect of the explosion, the stability of the conditions of the quarry with the initial mining geological conditions and the parameters of drilling and blasting operations. On the basis of analytical methods, the calculation and analysis of the seismic stability of the rocks of the deposit was carried out. Also, data on the seismic effect of the explosion on the mass near the site of the explosion were obtained using instrumental measurements of the impact of the explosion in the quarry. Based on the results of measurements and calculations, rational parameters of drilling and blasting operations on the marginal contour of the quarry were proposed. As a result of the conducted research, the seismic coefficients of the ore Massif were determined. The lowest shear rate was determined for the ores of the Kusmurun deposit Статья посвящена изучению сейсмического воздействия взрывных работ на устойчивость карьерных уступов с учетом исходных горно-геологических условий и параметров буровзрывных работ. На основе аналитических методов был проведен расчет и анализ сейсмостойкости горных пород месторождения. Также были получены данные о сейсмическом воздействии взрывных работ на массив вблизи источника с помощью инструментальных измерений воздействия взрывов в карьере. На основании результатов измерений и расчетов были предложены рациональные параметры буровзрывных работ в предельном контуре карьера. В результате выполненных исследований определены сейсмические коэффициенты массива горных пород. Установлена минимальная скорость сдвижения для горных пород Кушмурунского месторождения
- 28 February 2023
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 32-37
Predicting underground mining impact on the earth’s surface
Purpose. Development of a digital model of the stress-strain state of a rock mass during the extraction of coal by an underground method to predict the displacement of the earth’s surface. Methodology. The proposed technique is based on modeling the stress-strain state of a rock mass using the finite element method. Computer simulation of the stress-strain state of the rock massif was carried out in the area of lavas worked out in previous years in layers with the index K of the Karaganda suite of the mine named after Kostenko of the Karaganda coal basin, where instrumental surveying measurements were previously made to monitor the vectors and numerical values of the displacements of the earth’s surface undermined by mining. Findings. The reliability of the obtained finite element model of a rock mass for predicting the process of displacement of rocks and the earth’s surface is confirmed by the results of full-scale instrumental mine surveying measurements on the earth’s surface. Originality. For the first time, a method has been proposed for predicting the shifts of points on the earth’s surface, taking into account the physical and mechanical properties of rocks, based on a finite element model of a rock mass. A new approach was applied to assess the reliability of the model of the stress-strain state of a rock mass based on a comparison of the results obtained with the data of instrumental mine surveying. Practical value. A technique for computer simulation of the stress-strain state of a rock mass during the extraction of hard coal at the mine named after Kostenko, owned by one of the world’s leading steel producers, JSC ArcelorMittal. For modeling, a site was chosen in the area of lava mining along the coal seams of the Karaganda Formation of seams, starting from the K18 seam to the K10 seam, that is, a rock mass with a depth of more than 700 m. Previously, within this area a series of instrumental surveying observations was carried out of the displacement of the earth’s surface during the working out of these lavas using the method of roof management – complete collapse. The obtained values of vertical displacements of a point on the earth’s surface according to the results of computer simulation of the stress-strain state of a rock mass correspond to the data of field mine surveying observations of displacements of the same point, which confirms the reliability of the constructed model.
- 28 February 2023
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 32-37
Predicting underground mining impact on the earth’s surface
Purpose. Development of a digital model of the stress-strain state of a rock mass during the extraction of coal by an underground method to predict the displacement of the earth’s surface. Methodology. The proposed technique is based on modeling the stress-strain state of a rock mass using the finite element method. Computer simulation of the stress-strain state of the rock massif was carried out in the area of lavas worked out in previous years in layers with the index K of the Karaganda suite of the mine named after Kostenko of the Karaganda coal basin, where instrumental surveying measurements were previously made to monitor the vectors and numerical values of the displacements of the earth’s surface undermined by mining. Findings. The reliability of the obtained finite element model of a rock mass for predicting the process of displacement of rocks and the earth’s surface is confirmed by the results of full-scale instrumental mine surveying measurements on the earth’s surface. Originality. For the first time, a method has been proposed for predicting the shifts of points on the earth’s surface, taking into account the physical and mechanical properties of rocks, based on a finite element model of a rock mass. A new approach was applied to assess the reliability of the model of the stress-strain state of a rock mass based on a comparison of the results obtained with the data of instrumental mine surveying. Practical value. A technique for computer simulation of the stress-strain state of a rock mass during the extraction of hard coal at the mine named after Kostenko, owned by one of the world’s leading steel producers, JSC ArcelorMittal. For modeling, a site was chosen in the area of lava mining along the coal seams of the Karaganda Formation of seams, starting from the K18 seam to the K10 seam, that is, a rock mass with a depth of more than 700 m. Previously, within this area a series of instrumental surveying observations was carried out of the displacement of the earth’s surface during the working out of these lavas using the method of roof management – complete collapse. The obtained values of vertical displacements of a point on the earth’s surface according to the results of computer simulation of the stress-strain state of a rock mass correspond to the data of field mine surveying observations of displacements of the same point, which confirms the reliability of the constructed model.
- 29 December 2022
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 12(212),p. 52-57
Analysis of delivery and shipment processes of ore in conditions sub-storey drilling systems
Статья посвящена анализу доставки и отгрузки руды в условиях подземной добычи системой отработки подэтажными штреками с учетом дистанционного управления технологическим процессом. Анализ показал достоинства применения погрузочно-доставочных машин, оснащенных системами дистанционного управления. Для детального исследования вопроса доставки и отгрузки руды выбраны запасы Западного участка месторождения Нурказган, для сравнения приведены данные по Иртышскому руднику. По горнотехническим условиям Западного участка месторождения, а также в соответствии с анализом технологий доставки и отгрузки на аналогичных месторождениях наиболее приемлемыми являются варианты системы разработки подэтажного обрушения и система подэтажных штреков с последующей выемкой целиков и обрушением. The article is devoted to the analysis of the delivery and shipment of ore in the conditions of underground mining by the system of mining by sublevel drifts, taking into account the remote control of the technological process. The analysis showed the advantages of using loading and delivery machines equipped with remote control systems. For a detailed study of the issue of delivery and shipment of ore, the reserves of the Western section of the Nurkazgan deposit were selected, for comparison, data on the Irtysh mine are given. According to the mining conditions of the Western section of the deposit, as well as in accordance with the analysis, the options for the development of sublevel caving and the system of sublevel drifts with subsequent excavation of pillars and caving are the most acceptable.
- 29 December 2022
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 12(212),p. 52-57
Analysis of delivery and shipment processes of ore in conditions sub-storey drilling systems
Статья посвящена анализу доставки и отгрузки руды в условиях подземной добычи системой отработки подэтажными штреками с учетом дистанционного управления технологическим процессом. Анализ показал достоинства применения погрузочно-доставочных машин, оснащенных системами дистанционного управления. Для детального исследования вопроса доставки и отгрузки руды выбраны запасы Западного участка месторождения Нурказган, для сравнения приведены данные по Иртышскому руднику. По горнотехническим условиям Западного участка месторождения, а также в соответствии с анализом технологий доставки и отгрузки на аналогичных месторождениях наиболее приемлемыми являются варианты системы разработки подэтажного обрушения и система подэтажных штреков с последующей выемкой целиков и обрушением. The article is devoted to the analysis of the delivery and shipment of ore in the conditions of underground mining by the system of mining by sublevel drifts, taking into account the remote control of the technological process. The analysis showed the advantages of using loading and delivery machines equipped with remote control systems. For a detailed study of the issue of delivery and shipment of ore, the reserves of the Western section of the Nurkazgan deposit were selected, for comparison, data on the Irtysh mine are given. According to the mining conditions of the Western section of the deposit, as well as in accordance with the analysis, the options for the development of sublevel caving and the system of sublevel drifts with subsequent excavation of pillars and caving are the most acceptable.