Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daulet Takhanov has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluating Rock Mass Quality and Critical Depth for Rockburst Hazard in Deep Mines

    by D. K. Takhanov, G. K. Sapinov, M. Zh. Balpanova, D. T. Ivadilinova, M. A. Zharaspayev, Z. Zh. Abdrasheva

    This study investigates the geomechanical behavior of the rock mass at the Zhayssan mine in Kazakhstan, focusing on improving the safety of deep mining operations. The objective is to forecast the working strength of rock masses and assess the associated rockburst risks, especially given the limited existing data on the mechanical properties of the site’s rocks. To achieve this, we conducted comprehensive laboratory tests to determine rock strength characteristics, brittleness, and elastic energy accumulation capacity. We analyzed these data using the Rock Quality Designation (RQD) indicator and constructed a simplified geomechanical model of the deposit. Our findings reveal that rock mass quality improves with depth, as indicated by higher RQD values and reduced fracturing intensity; however, this improvement coincides with an increased risk of dynamic rock pressure events, particularly beyond the analytically estimated critical depth of approximately 400 meters. The study’s novelty lies in its integration of local testing data with comparative regional data, allowing for a more robust preliminary risk assessment despite limited local measurements. As promising directions, the paper suggests further laboratory and field research to refine methods for forecasting the strength and stability of mine workings.


  • IMPROVEMENT OF PREDICTIVE METHODS FOR CALCULATING SURFACE SUBSIDENCE DURING THE DEVELOPMENT OF HORIZONTAL ORE DEPOSITS

    by L.N. Gumilyov Eurasian National University, Aigul Kozhas, Daulet Takhanov, Karaganda Technical University named after Abylkas Saginov, Mukhammedrakhym Rabatuly, Abylkas Saginov Karaganda Technical University, Gylym Sapinov, Nazarbayev University, Aisaule Zheldikbaeva

    Бір типті және қабаттасатын тау жыныстары жағдайында қазу кезінде бүйірлік беттердің қысылуының деформациясын ескере отырып, өндірілген кеңістіктің үстінен жер бетінің шөгуін анықтау тәсілі ұсынылды. Шөгу жер бетіне шыққан кезде жылжу мульдасының болжамды профилін құру мәселелері қаралды. Зерттеудің мақсаты-тазарту өндірісінің бүйір беттерінің қысылу деформацияларын ескере отырып, жер бетінің шөгуін анықтау. Жұмыста жер асты тазарту жұмыстарының жер бетінің жай-күйіне әсерін болжауға мүмкіндік беретін жылжу параметрлерін анықтау әдісі ұсынылған, ол жұмсақ кенді денелерді қазу кезінде целиктердің абсолютті деформацияларының әсер ету дәрежесін, тау жыныстары мен тазарту кеңістігінің бүйір аймақтарының жер бетінің шөгу мөлшеріне әсер ету коэффициентін ескереді. Тау жыныстары мен жер бетінің жылжуын есептеудің ұсынылған болжамды әдісі тау жыныстары массивінде сырғанау сызықтарының қисықтарын құруға негізделген. Табиғи тепе-теңдік қоймасын жасау арқылы жер асты тау-кен жұмыстарының жер бетіне әсер ету дәрежесі белгіленеді. Құлау күмбезі немесе табиғи тепе-теңдік күмбезінің және жылжымалы мульда аймақтарының (тегіс деформация аймақтары, қауіпті жылжу және құлау аймақтары, құлаудың пайда болу аймақтары) шекаралары үш отбасының сырғанау беттерінің көмегімен белгіленеді. Сырғанау сызықтарының қисықтары тау жыныстарының әр литологиялық типі үшін жеке есептелген және салынған тау жыныстарының беріктік паспорттарына негізделген.

  • Identifying rational locations for field mine workings in the zone influenced by mined-out space during repeated mining of pillars

    by Abzal Zhienbayev, Daulet Takhanov, Madiyar Zharaspaev, Aidar Kuttybayev, Bekzad Rakhmetov, Dina Ivadilinova

    Purpose. The research aims to study the influence of bearing pressure from the barrier pillar on the field drift in order to determine the rational locations for placing field mine workings in the zone influenced by repeated mining at the Zhomart Mine of the Zhaman-Aybat field. Methods. Research includes an analysis of the results of mine studies conducted on the basis of instrumental measurements of actual parameters of the mining system structural elements, processing of multi-year statistical data on monitoring of the rock mass state, as well as modeling using Rocscience software to determine the stress-strain state of the rock mass. The actual physical-mechanical properties of the ores and host rocks of the Zhaman-Aybat field are used for modeling. Findings. The research makes it possible to determine the parameters of the field conveyor drift rational location relative to the protective pillar and the mined-out space. It is substantiated that the field conveyor drift should be designed not less than -30 m deeper than the bottom of the mined-out deposit 4-1 and at a distance of -70 m from the protective pillar boundary. The maximum stresses σmax acting on the contour of the field conveyor drift when it is located at different points are calculated. Originality. The dependence of the change in maximum stresses acting on the contour of the field conveyor drift on its location relative to the protective pillar has been found, which makes it possible the rock mass geomechanical state to be assessed in the form of a model. Practical implications. The mine surveys and numerical experimental studies have provided a new solution to an important scientific problem related to predicting the geomechanical state of the rock mass and ensuring the stability of mine workings adjacent to the mined-out space. The research results can be used in designing repeated mining operations and predicting the geo-mechanical state of the rock mass in order to ensure safe mining operations when driving preparatory workings.


  • Жаман-Айбат кен орнын кен орнын қайта өндіру кезінде жер бетіне шығатын іргелес қалыңдықтың опырылу шарты

    by M.ZH. Balpanova, D. Takhanov, A.YE. Kuttybayev, A.B. Zhienbayev

    The paper presents the results of studying the stress-strain state of the overlying rock massif in the room-and-pillar mining system with subsequent extraction of inter-chamber pillars at the Zhomart-2 mine. Calculations have been modeled using the RS2 program with the worked-out space width of 100 m, 150 m, 200 m, 300 m, 350 m and 400 m. The obtained data have been compared with the results of seismic exploration. Having compared the results of modeling the collapse of the overlying strata above the areas of remining with the results of seismic exploration, it has been concluded that they have practical similarities, and this model can be used for further modeling to determine the conditions for the complete undermining of the overlying strata of the earth’s surface and to identify the pattern of formation of the collapse arch from the equivalent span of undermining Мақалада Жомарт-2 кеніші жағдайында кенді бірінші кезекте камералы бағанды қазу жүйесімен өндіріп, және екінші кезекте кентіректерді қайта қазып алғаннан кейін кеншоғырдан жоғары жатқан таужыныс қабатының кернеуленіп-деформациялану күйін зерттеудің нәтижелері келтірілген. Есептеулер RS2 бағдарламасының көмегімен өндірілген кеңістіктің ені 100 м, 150 м, 200 м, 300 м, 350 м және 400 м жағдайлары модельденді, сонымен бірге алынған деректерді сейсмикалық барлау нәтижелерімен салыстыру жүргізілді. Қайта өндіру учаскелерінің үстіндегі қабаттың құлауын модельдеу нәтижелерін сейсмикалық барлау нәтижелерімен салыстыра отырып, олардың практикалық ұқсастықтары бар деген қорытынды жасауға болады және бұл модельді жер бетінің толық өндірілу шарттарын анықтау және эквивалентті аралықтан опырылу күмбезінің пайда болу заңдылықтарын анықтау мақсатында одан әрі модельдеу үшін пайдалануға болады В статье приводятся результаты исследования напряженно-деформированного состояния налегающей толщи пород при камерно-столбовой системе разработки с последующим извлечением междукамерных целиков на руднике Жомарт-2. Расчеты для горно-геологических условий рудника Жомарт-2 были смоделированы с помощью программы RS2, при ширине выработанного пространства 100 м, 150 м, 200 м, 300 м, 350 м и 400 м и проведено сопоставление полученных данных с результатами сейсморазведки. Сравнив результаты моделирования обрушения налегающей толщи над участками повторных отработок с результатами сейсморазведки, можно сделать вывод, что они имеют практическое сходство, и данная модель может быть использована для дальнейшего моделирования с целью определения условия полной подработки налегающей толщи земной поверхности и выявления закономерности образования свода обрушения от эквивалентного пролета подработки

  • Determining the parameters for the overlying stratum caving zones during re-peated mining of pillars

    by Daulet Takhanov, Abzal Zhienbayev, Madiyar Zharaspaev

    Purpose. The research aims to determine the parameters for the overlying stratum caving zones above the mined-out space during repeated mining of pillars at the Zhomart Mine of the Zhaman-Aybat field for the purpose of predicting hazardous zones of influence of mining operations. Methods. Research includes an analysis of the results of previous in-situ studies conducted using seismic surveys, as well as modeling with the Examine2D software to determine the stress-strain state of the overlying stratum mass. The elastic and strength characteristics of an anisotropic mass are used for modeling, taking into account the generalized Hoek-Brown criterion with the Geological Strength Index (GSI) based on a geomechanical description of the mass quality. Comparative analysis of modeling results with seismic survey results is conducted to confirm the effectiveness of the developed methodology. Findings. The research provides an opportunity to determine the overlying stratum caving parameters, such as the caving arch height and the condition for complete undermining of the overlying stratum at the Zhaman-Aybat field at different spans of the mined-out space (from 50 to 350 with a step of 50 m, reaching the maximum span of 370 m). Originality. . It has been determined that the caving arch height depends on the outcrop span and increases exponentially (hcav = 16.473 e0.008Le). In addition, the condition of the earth’s surface complete undermining has been identified depending on the depth of the site to be gotten. Practical implications.The research results can be used to develop a normative document for calculating the earth’s surface shear during the repeated mining of pillars at the Zhomart Mine of the Zhaman-Aybat field. The data obtained will also be useful in planning repeated mining and predicting the earth’s surface shear to avoid negative impacts of mining operations on surface structures.


  • Predicting underground mining impact on the earth’s surface

    by D. T Ivadilinova, T. K Issabek, D. K Takhanov, G. B Yeskenova

    Purpose. Development of a digital model of the stress-strain state of a rock mass during the extraction of coal by an underground method to predict the displacement of the earth’s surface. Methodology. The proposed technique is based on modeling the stress-strain state of a rock mass using the finite element method. Computer simulation of the stress-strain state of the rock massif was carried out in the area of lavas worked out in previous years in layers with the index K of the Karaganda suite of the mine named after Kostenko of the Karaganda coal basin, where instrumental surveying measurements were previously made to monitor the vectors and numerical values of the displacements of the earth’s surface undermined by mining. Findings. The reliability of the obtained finite element model of a rock mass for predicting the process of displacement of rocks and the earth’s surface is confirmed by the results of full-scale instrumental mine surveying measurements on the earth’s surface. Originality. For the first time, a method has been proposed for predicting the shifts of points on the earth’s surface, taking into account the physical and mechanical properties of rocks, based on a finite element model of a rock mass. A new approach was applied to assess the reliability of the model of the stress-strain state of a rock mass based on a comparison of the results obtained with the data of instrumental mine surveying. Practical value. A technique for computer simulation of the stress-strain state of a rock mass during the extraction of hard coal at the mine named after Kostenko, owned by one of the world’s leading steel producers, JSC ArcelorMittal. For modeling, a site was chosen in the area of lava mining along the coal seams of the Karaganda Formation of seams, starting from the K18 seam to the K10 seam, that is, a rock mass with a depth of more than 700 m. Previously, within this area a series of instrumental surveying observations was carried out of the displacement of the earth’s surface during the working out of these lavas using the method of roof management – complete collapse. The obtained values of vertical displacements of a point on the earth’s surface according to the results of computer simulation of the stress-strain state of a rock mass correspond to the data of field mine surveying observations of displacements of the same point, which confirms the reliability of the constructed model.


  • Assessing the quality of drilling-and-blasting operations at the open pit limiting contour

    by B Hussan, M.I Lozynska, D.K Takhanov, A.O Oralbay, S.L Kuzmin

    Purpose. To develop a methodology for assessing the quality of drilling-and-blasting operations when setting the side to the final position. In this regard, it is necessary to study the nature of deformations in the near-side masses of the design open-pit contours and to assess the seismic impact of blast waves in accordance with damage in the near and far zones from the open-pit boundary, as well as the level of generated seismic vibrations. Methodology.A methodology for assessing the quality of drilling-and-blasting operations at the limiting contour of open pits is developed using the analysis of the mining-and-geological conditions of the rocks constituting the field, in-situ surveying of the state of the open-pit sides, analysis of the physical-mechanical properties of the host rocks, analytical studies and instrumental measurements of the blasting effect. Findings.Based on the analytical methods, the calculation and analysis of the seismicity coefficient of the rocks at the field have been performed. By means of instrumental measurement of the blasting effect in open pit, data have been obtained on the seismic impact of blasting operations on the near-side mass. Based on the results of these works, a methodology for assessing drilling-and-blasting operations at the limiting contour of the open pit has been developed. Originality.In this work, to assess the blasting effect, the seismicity coefficient of the rock mass is used, which characterizes the degree of elastic response to external dynamic influence and is a parameter that determines the elastic seismic wave intensity with distance from the site of blasting operations. Based on the calculation, a map of the seismicity coefficient distribution in the open-pit area has been compiled. Using the method of instrumental measurements, which serves to determine the seismic impact of blasting on a rock mass, the degree of blasting effect on a near-side mass has been revealed. This made it possible to develop a method for assessing the blasting quality, based on determining the percentage of permissible deviations in the face drilling quality. Practical value.The results of the work will be used to calculate the safe parameters of conducting the blasting operations when setting the side to the final position. This method for assessing the quality of drilling-and-blasting operations can be applied at any mining enterprise conducting open-cut mining of minerals.


  • Open Access

    Geomechanics substantiation of pillars development parameters in case of combined mining the contiguous steep ore bodies

    by Daulet Takhanov, Berikbol Muratuly, Zhuldyz Rashid, Adilzhan Kydrashov

    Purpose. Determining the actual dimensions of the protecting and crown pillars of ore bodies by seismic survey and assessing the possibility of rock mass collapse and fracturing at the lower levels of the Zhairemskoye field. Methods. An integrated approach is used, which involves the analysis of complete ore bodies development during the combined mining. To determine the geological strength index (GSI) and rock mass rating (RMR), the mass structure is studied, as well as the survey is executed of rock fracturing on the contours of mine workings at levels of +288, +240, +192, +144 m. In addition, the physical and mechanical properties of rocks are refined using the RocLab software. Using the numerical modelling of the self-caving process, when mining the protecting and crown pillars, the processed results of numerical modelling are analysed and the possible zones of the mass deformation are assessed based on the Phase2 software. Findings. It has been determined that during the mining of ore bodies 4 and 6, protecting pillars between the quarry and the underground mine, crown pillars between the levels up to the level of +144 m, the rock displacements are possible along glide surfaces. It has been revealed that the haulage workings of levels +240 and +192 m fall into the zone of possible displacements influence, and the rock pillar between ore bodies 4 and 6 will be exposed to inelastic deformations during the mining of crown pillars to the level of +144 m. It has been found that after the crown pillar development between the levels of +240 and +192 m for ore body 6, the rock pillar destructions are possible between ore bodies 4 and 6, since during the modelling, displacements of more than 2 mm are observed. In this case, the destruction processes are possible in the rock pillar upper part. Originality.A geomechanical assessment of the rocks tendency to caving is given and problem areas of stability during the mining of ore bodies 4 and 6 in the Zhairemskoye field are identified. Practical implications. The stable parameters of protecting and crown pillars have been substantiated, which is an important aspect in the design/efficient technology of mining the contiguous ore bodies. Keywords: engineering seismic, ore body, pillar, level, iron, manganese


  • Methods of Forward Calculation of Ground Subsidence above Mines

    by K. Ch. Kozhogulov, D. K. Takhanov, A. K. Kozhas, A. Zh. Imashev, M. Zh. Balpanova

    The article discusses geomechanical justification of undermined ground evaluation methods. The proposed method of subsidence assessment allows analyzing influence of underground mining on ground surface in development of horizontal and flat-dipping uniform and interstratified beds with different deformability. The predictive assessment procedures for the subsidence trough profile in case of uniform and interstratified rocks are presented.