XWXiaoqing Wang

Xiaoqing Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaoqing Wang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect and Mechanism of a Triazinetrione Curing Agent on Mechanical Properties of Thermosetting Glycidyl Azide Polyme Cross-Linked Network

    by Zhengyuan Wang, Yujuan Jin, Fengdan Zhu, Chengzhao Tu, Desheng Yang, Chaofei Bai, Hu Li, Xinlong Zeng, Guoping Li, Xiao Qing Wang, et al.

    A novel multifunctional isocyanate curing agent, denoted as TCI, was facilely synthesized via a one-step reaction involving 1,3,5-tris(2-hydroxyethyl)cyanuric acid and hexamethylene diisocyanate. The structural design of TCI incorporates a rigid triazine ring core and three additional urethane linkages, enabling the construction of high-performance crosslinked networks within glycidyl azide polymer (GAP)-based energetic elastomers. By systematically comparing TCI with the commercially available curing agent N100, the structure–property relationships were elucidated through a combination of curing kinetics, spectroscopic characterization, mechanical testing, and thermal analysis. TCI exhibits superior reactivity toward GAP, effectively compensating for the low reactivity of secondary hydroxyl groups. Structural characterization via XRD, SAXS, and FTIR demonstrated that TCI facilitates the formation of dense and stable hydrogen-bonding networks, which reduce the intermolecular chain spacing (0.424 nm for TCI–GAP vs. 0.436 nm for N100–GAP) and optimize the microphase separation behavior of the elastomer networks.Mechanical testing demonstrated that the tensile strength and elongation at break of TCI–GAP reach 1.74 MPa and 297.7%, respectively, representing increases of 95.5% and 163% over N100–GAP (0.85 MPa and 105.8%). Morphological analysis confirmed the presence of uniformly distributed crosslinking junctions and ductile fracture features in TCI–GAP, which are responsible for the improved load-bearing capacity and energy dissipation efficiency. Dynamic hydrogen-bonding interactions were identified as the key mechanism governing the mechanical and thermal performance of TCI-GAP. DMA and LF-NMR results indicated that TCI–GAP possesses higher storage modulus and more restricted segmental motion, leading to excellent thermomechanical stability. The novel TCI curing agent offers a facile and effective approach to simultaneously improve the mechanical strength, toughness, and thermal stability of GAP-based networks, showing great promise for applications in advanced solid propellants and energetic materials.

  • Open Access

    Effect of Octa(perfluorodecyl)-Type Polyhedral Oligomeric Silsesquioxanes on Combustion Characteristics of the Mixed Nitrate Ester Gun Propellant

    by Xuefei Du, Xiang Liu, Liangyou Zhao, Xiaoqing Wang, Guoping Li

    The formation of a burning rate gradient in gun propellant by flame-retardant treatment is one of the effective methods to achieve progressive combustion and thus improve the energy utilization efficiency. In order to reveal the effect of octa­(perfluorodecyl)-type polyhedral oligomeric silsesquioxanes (FPS-POSS) on the combustion performance of gun propellants, seven-perforated granular mixed nitrate ester gun propellants containing FPS-POSS of 0, 0.5, 1.0, and 1.5 wt % were prepared by the traditional semisolvent method. The chemical compatibility of FPS-POSS with the gun propellant components, the thermal decomposition properties, and the combustion characteristics of the gun propellants containing FPS-POSS were systematically investigated. The results show that FPS-POSS is well compatible with the components of the mixed nitrate ester gun propellant and does not affect the thermal stability of gun propellant but also reduces the residual weight of the gun propellant after thermal decomposition. Additionally, FPS-POSS can reduce the maximum burning pressure (Pm) and burning rate (u) of the system and prolong the burning time (tm) for gun propellants to reach the maximum pressure, and this effect tends to increase with the increase of its content. There are two reasons for this. First, FPS-POSS has a lower chemical energy than energy-rich components such as nitrocellulose and nitroglycerin, and its addition to the gun propellant can affect the burning rate at the energy level. The second is that FPS-POSS not only traps reactive radicals in the gas phase by generating fluorine-containing radicals during combustion but also generates porous carbonaceous layer in the condensed phase to hinder the propagation of flames and gaseous products. It suggests that FPS-POSS is an excellent additive in the low burning rate region of gun propellants. When the content of FPS-POSS was 1.5 wt %, FPS-POSS decreased the Pm of the system by 1.83%, increased the tm by 7.57%, and reduced the burning rate by 9.81%. High- and low-temperature experiments showed that FPS-POSS was favorable for reducing the temperature coefficients of gun propellants.

  • Open Access

    Research on the Thermal Aging Performance of a GAP-Based Polyurethane Elastomer

    by Chang Liu, Fengdan Zhu, Desheng Yang, Chaofei Bai, Xiaoqing Wang, Guoping Li, Yunjun Luo

    Glycidyl azide polymer (GAP)-based polyurethane is an ideal elastomeric matrix for high-energy, low-smoke, and insensitive solid propellants. As the skeleton structure of GAP propellants, changes in the structure and properties of GAP elastomers during aging lead to the deterioration of propellant performance (especially in relation to mechanical properties), which causes safety risks. A high-temperature-accelerated aging experiment (70 °C) on a GAP elastomer was conducted. The evolution of the microstructure of the GAP elastomer system was analyzed by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR), and variations in the macroscopic properties were analyzed by the hardness test and the uniaxial tensile test. The experimental results showed that thermal aging of the GAP elastomer is a coupled process of multiple chemical reactions. The azide groups, urethane groups, and ether bonds were the weak links in the network structure, breaking during the aging process, and the crosslinking density rose and then decreased. Macroscopic properties also showed segmented changes. The aging process was divided into three stages: post-curing (stage one); when the crosslinked network began to break (stage two), and when the crosslinked network was destroyed (stage three). Changes in the microstructure and macroscopic properties were consistent. This work is of great significance for exploring the aging mechanism of GAP propellants and extending their storage life.


  • Open Access

    Tribological and Mechanical Applications of Liquid-Crystal-Polymer-Modified Carbon-Fiber-Reinforced Polyamide–Polyurethane Composites

    by Zhen Zhou, Xiaoqing Wang, Xiaomeng Li, Chang Liu, Guoping Li, Yunjun Luo

    An aromatic copolyester liquid crystal polymer (LCP) was introduced into carbon-fiber-reinforced polyamide–polyurethane (CF/PA-PU) composites through melt blending to improve the tribological properties of the composites. The effects of LCP on the mechanical, processing, and thermal properties of CF/PA-PU composites were compared to those of commonly-used graphite (Gr). The results showed that at 5 wt.% LCP content, the coefficient of friction (COF) was decreased by 16.06%, and the wear rate by 32.22% in the LCP/CF/PA-PU composite compared to the CF/PA-PU composite. Furthermore, using LCP instead of Gr showed significantly improved mechanical properties and reduced processing viscosity. The tensile strength of 5%LCP/CF/PA-PU composite could reach 99.08 MPa, while the equilibrium torque was reduced, being 26.85% higher and 18.37% lower than those of CF/PA-PU composite, respectively. The thermal stability of LCP/CF/PA-PU composites was also enhanced. The addition of 5 wt.% LCP to CF/PA-PU composite increased the initial decomposition temperature by 14.19% compared to CF/PA-PU. In sharp contrast, the addition of Gr increased equilibrium torque and actual processing temperature leading to processing difficulties and instability. This approach offers a novel strategy for tribological applications and tackles the problem of high viscosity in CF/PA-PU composites.


  • Open Access

    Effects of liquid crystal polymer (LCP) on the structure and performance of PEEK/CF composites

    by Meiyun Song, Xiaoqing Wang, Ran Du, Zhen Zhou, Xiaomeng Li, Guoping Li, Yunjun Luo

    Here a liquid crystal polymer (LCP) was introduced into a PEEK/CF system as a new solution to simultaneously promote processing and mechanical performance of PEEK/CF and other polymer-based composites.


  • Open Access

    Synthesis and Characterization of Environmentally-Friendly Self-Matting Waterborne Polyurethane Coatings

    by Jiajia Chang, Xiaoqing Wang, Jian Shao, Xiaomeng Li, Wei Xin, Yunjun Luo

    A series of self-matting waterborne polyurethanes (WPUs) were successfully prepared by introducing hydrophilic units into both soft and hard segments. By employing a polycaprolactone polyol containing carboxylate groups within the polymer chains to provide hydrophilicity directly, the matting performance of WPU films was greatly improved. The chemical structures of the WPU resins were confirmed by FTIR spectroscopy, and the morphology of WPU films was observed by SEM. The parameters of WPU preparation were investigated in detail. It was found that the surface gloss of WPU films as well as the particle sizes of WPU dispersions were closely associated with the content of hydrophilic units. As the content of carboxylates or sulfonates increased, the particle sizes of WPU decreased, while the gloss increased gradually. When the particle sizes of dispersions were greater than 3 μm, the gloss of WPU films coated on a leather surface was lower than 1. The results of TG showed that, the initial decomposition temperatures of WPU films were higher than 280 °C, which indicated these films also had good thermal stability. The prepared self-matting WPU coatings would have potential application prospects in the field of leather finishing.


  • Open Access

    Study of the Interfacial Interaction Performance of Branched Bonding Agents and CL-20

    by Yanmei Zhao, Xiaoqing Wang, Xiaomeng Li, Yunjun Luo, Guoping Li

    Adding bonding agents to the formulation is an effective way to solve the dewetting of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) in the binder matrix. For the design and selection of the structure of a bonding agent suitable for CL-20, a series of branched polyether bonding agents with terminal groups substituted by cyano, ester and hydroxyl functional groups were employed. Contact angle, Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS) measurements were performed, and the results were compared with that of common bonding agent, the boron trifluoride triethanolamine complex (TEA·BF3). The results revealed that the nitramine reinforcement of the three polar groups to CL-20 was in the order cyano group > hydroxyl group > ester group. It is proposed that CBPE-10,10 (cyano-terminated branched polyether bonding agent) had the strongest interfacial interaction with CL-20. The adhesion work value was 105.37 mN⋅m−1 and the adhesion degree was 41.04%. The bonding properties of CBPEs/CL-20 were better than those of TEA·BF3/CL-20.