Yukio Takahashi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yukio Takahashi has a total of 95 co-authors. Here are the top co-authors by number of shared publications:
- Nozomu Ishiguro
International Center for Synchrotron Radiation Innovation Smart (SRIS), Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan
19 shared publications Shuntaro Takazawa
19 shared publicationsHideshi Uematsu
International Center for Synchrotron Radiation Innovation Smart (SRIS), Tohoku University, Sendai 980-8572, Japan
10 shared publicationsMasaki Abe
International Center for Synchrotron Radiation Innovation Smart (SRIS), Tohoku University, 468-1 Aramaki Aza-Aoba, Aoba-Ku, Sendai, 980-8572, Japan
10 shared publicationsNaru Okawa
10 shared publicationsYuhei Sasaki
Tohoku University
10 shared publications
Latest Publications
- 1 January 2027
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 34 (1)
Extending high-resolution ptychography into the tender X-ray regime at NanoTerasu BL10U
X-ray ptychography is a lensless imaging method in which spatial resolution is determined by both the highest spatial frequency in diffraction intensity patterns and sample scanning precision. Tender X-rays (2–5 keV) provide a useful balance of penetration depth, strong phase and absorption contrast, and access to elemental absorption edges. However, high-resolution imaging in this energy range remains challenging because of limited access to high-brightness sources, high-performance monochromators, and sufficiently sensitive detectors. The radiation dose also becomes an important consideration at high resolution. In this study, we extended the spatial-resolution capability of tender X-ray ptychography at 4.5 keV. Experiments were conducted at the BL10U beamline of NanoTerasu, a 3 GeV synchrotron radiation facility, using advanced Kirkpatrick–Baez focusing mirrors and a CITIUS detector. Diffraction patterns collected at multiple detector positions were jointly used for image reconstruction to increase the accessible spatial-frequency range. Edge-response analysis of the reconstructed phase projection of Au-nanocubes yielded a projection spatial resolution of approximately 7.4 nm. These results demonstrate high-resolution imaging in the tender X-ray region and expand the spatial-resolution capability of the NanoTerasu BL10U ptychography system.
- 1 January 2027
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 34 (1)
Extending high-resolution ptychography into the tender X-ray regime at NanoTerasu BL10U
X-ray ptychography is a lensless imaging method in which spatial resolution is determined by both the highest spatial frequency in diffraction intensity patterns and sample scanning precision. Tender X-rays (2–5 keV) provide a useful balance of penetration depth, strong phase and absorption contrast, and access to elemental absorption edges. However, high-resolution imaging in this energy range remains challenging because of limited access to high-brightness sources, high-performance monochromators, and sufficiently sensitive detectors. The radiation dose also becomes an important consideration at high resolution. In this study, we extended the spatial-resolution capability of tender X-ray ptychography at 4.5 keV. Experiments were conducted at the BL10U beamline of NanoTerasu, a 3 GeV synchrotron radiation facility, using advanced Kirkpatrick–Baez focusing mirrors and a CITIUS detector. Diffraction patterns collected at multiple detector positions were jointly used for image reconstruction to increase the accessible spatial-frequency range. Edge-response analysis of the reconstructed phase projection of Au-nanocubes yielded a projection spatial resolution of approximately 7.4 nm. These results demonstrate high-resolution imaging in the tender X-ray region and expand the spatial-resolution capability of the NanoTerasu BL10U ptychography system.
- 8 September 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (19) , 35077
Development of phase-modulated X-ray multibeam ptychography with total reflection focusing mirrors
We propose phase-modulated X-ray multibeam ptychography that utilizes a total reflection mirror focusing optical system to achieve both a large field of view (FOV) per unit time and high spatial resolution. In this approach, a multi-slit array is placed at the secondary source position, and phase modulators are introduced into selected sub-slits to generate seven beams with distinct phase and amplitude structures. Numerical simulations confirm that this phase modulation enhances beam distinguishability, improving the convergence of phase retrieval. Furthermore, synchrotron radiation experiments conducted using a Ta test chart and Sn–Bi particles demonstrate a significant expansion of the FOV. The spatial resolution of seven-beam ptychography was found to be maintained at a level comparable to that of single-beam ptychography. The proposed method enables high-throughput, large-FOV imaging while preserving a high spatial resolution over a wide X-ray energy range, rendering it applicable to energy-resolved measurements, computed tomography, and in-situ observations.
- 8 September 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (19) , 35077
Development of phase-modulated X-ray multibeam ptychography with total reflection focusing mirrors
We propose phase-modulated X-ray multibeam ptychography that utilizes a total reflection mirror focusing optical system to achieve both a large field of view (FOV) per unit time and high spatial resolution. In this approach, a multi-slit array is placed at the secondary source position, and phase modulators are introduced into selected sub-slits to generate seven beams with distinct phase and amplitude structures. Numerical simulations confirm that this phase modulation enhances beam distinguishability, improving the convergence of phase retrieval. Furthermore, synchrotron radiation experiments conducted using a Ta test chart and Sn–Bi particles demonstrate a significant expansion of the FOV. The spatial resolution of seven-beam ptychography was found to be maintained at a level comparable to that of single-beam ptychography. The proposed method enables high-throughput, large-FOV imaging while preserving a high spatial resolution over a wide X-ray energy range, rendering it applicable to energy-resolved measurements, computed tomography, and in-situ observations.
- Open Access
- 26 August 2026
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 33 (5) , 1478-1485
XAFS measurement system using undulator synchronized on-the-fly monochromator scan at SPring-8 BL36XU
In X-ray absorption fine structure (XAFS) measurements at undulator beamlines, it has been difficult to simultaneously achieve both spectral time resolution and high X-ray flux that fully utilizes the optical performance of the beamline. To overcome this challenge, we developed a synchronization architecture for undulator beamlines, in which the undulator gap serves as the master axis while a compact channel-cut monochromator follows a pre-calculated nonlinear trajectory. In contrast to conventional feedback approaches, in which the monochromator serves as the master, the undulator gap is used as the master axis, enabling fast and flexible nonlinear synchronization with the compact channel-cut monochromator. Transmission and fluorescence quick-XAFS (QXAFS) measurements were successfully performed at the Ni K edge in the extended X-ray absorption fine structure (EXAFS) region within 6.4 s. The incident photon flux was six times higher than that of conventional QXAFS using a tapered and fixed undulator gap at the same acquisition time, demonstrating that the proposed synchronization architecture enables high-flux EXAFS measurements that were previously difficult to achieve with undulator-based QXAFS.
- 26 August 2026
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 33 (5) , 1478-1485
Open AccessXAFS measurement system using undulator synchronized on-the-fly monochromator scan at SPring-8 BL36XU
In X-ray absorption fine structure (XAFS) measurements at undulator beamlines, it has been difficult to simultaneously achieve both spectral time resolution and high X-ray flux that fully utilizes the optical performance of the beamline. To overcome this challenge, we developed a synchronization architecture for undulator beamlines, in which the undulator gap serves as the master axis while a compact channel-cut monochromator follows a pre-calculated nonlinear trajectory. In contrast to conventional feedback approaches, in which the monochromator serves as the master, the undulator gap is used as the master axis, enabling fast and flexible nonlinear synchronization with the compact channel-cut monochromator. Transmission and fluorescence quick-XAFS (QXAFS) measurements were successfully performed at the Ni K edge in the extended X-ray absorption fine structure (EXAFS) region within 6.4 s. The incident photon flux was six times higher than that of conventional QXAFS using a tapered and fixed undulator gap at the same acquisition time, demonstrating that the proposed synchronization architecture enables high-flux EXAFS measurements that were previously difficult to achieve with undulator-based QXAFS.
- Open Access
- 6 July 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (1)
Nondestructive structural evaluation of high-aspect-ratio-etched holes by tender x-ray ptychography with computed tomography
Nondestructive evaluation of high-aspect-ratio (HAR) structures in advanced memory devices is essential yet remains challenging at the nanoscale. In this study, we demonstrate tender x-ray ptychography for the characterization of HAR-etched hole structures with depths of approximately 10 μm. Reconstructed two-dimensional projection images, with a spatial resolution of 38.5 nm, reveal features such as necking at the amorphous carbon mask and tapered hole profiles. Furthermore, a three-dimensional (3D) electron density map was reconstructed using ptychographic x-ray computed tomography, achieving a spatial resolution of 67.5 nm. This approach enables direct visualization of etch-rate variations associated with aspect-ratio-dependent etching. These results establish a powerful nondestructive methodology for three-dimensional nanoscale evaluation of HAR structures, with significant potential for applications in advanced memory device development.
- 6 July 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (1)
Open AccessNondestructive structural evaluation of high-aspect-ratio-etched holes by tender x-ray ptychography with computed tomography
Nondestructive evaluation of high-aspect-ratio (HAR) structures in advanced memory devices is essential yet remains challenging at the nanoscale. In this study, we demonstrate tender x-ray ptychography for the characterization of HAR-etched hole structures with depths of approximately 10 μm. Reconstructed two-dimensional projection images, with a spatial resolution of 38.5 nm, reveal features such as necking at the amorphous carbon mask and tapered hole profiles. Furthermore, a three-dimensional (3D) electron density map was reconstructed using ptychographic x-ray computed tomography, achieving a spatial resolution of 67.5 nm. This approach enables direct visualization of etch-rate variations associated with aspect-ratio-dependent etching. These results establish a powerful nondestructive methodology for three-dimensional nanoscale evaluation of HAR structures, with significant potential for applications in advanced memory device development.
- Open Access
- 16 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Three-dimensional imaging of sulfur chemical states in polymers with micrometer thickness using sulfur K-edge ptychographic tomography
Three-dimensional visualization of chemical bonding states in light-element materials remains challenging, particularly for micrometer-thick specimens, due to strong X-ray absorption and limited photon flux in the tender X-ray regime. Here three-dimensional chemical-state imaging of sulfur in sulfurized poly(n-butyl methacrylate) (SPBMA) samples up to ~ 3.3 µm thick is demonstrated using ptychographic X-ray computed tomography at the sulfur K -edge. A high-resolution ptychographic CT system at the NanoTerasu BL10U beamline enables quantitative mapping of electron density, sulfur concentration, and spectral metrics derived from multi-energy imaging, that serve as proxies for sulfur–sulfur and sulfur–carbon bonding states, with ~ 80 nm spatial resolution. Multi-energy volumetric analysis using four carefully chosen photon energies reveals pronounced spatial heterogeneity in sulfur bonding, distinguishing sulfur–sulfur and sulfur–carbon bonds that are inaccessible from spatially averaged spectra. This study establishes sulfur K -edge ptychographic tomography as a potential platform for three-dimensional chemical-state imaging of light-element materials, enabling new nanoscale investigations of functional polymers and energy-related materials.
- 16 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessThree-dimensional imaging of sulfur chemical states in polymers with micrometer thickness using sulfur K-edge ptychographic tomography
Three-dimensional visualization of chemical bonding states in light-element materials remains challenging, particularly for micrometer-thick specimens, due to strong X-ray absorption and limited photon flux in the tender X-ray regime. Here three-dimensional chemical-state imaging of sulfur in sulfurized poly(n-butyl methacrylate) (SPBMA) samples up to ~ 3.3 µm thick is demonstrated using ptychographic X-ray computed tomography at the sulfur K -edge. A high-resolution ptychographic CT system at the NanoTerasu BL10U beamline enables quantitative mapping of electron density, sulfur concentration, and spectral metrics derived from multi-energy imaging, that serve as proxies for sulfur–sulfur and sulfur–carbon bonding states, with ~ 80 nm spatial resolution. Multi-energy volumetric analysis using four carefully chosen photon energies reveals pronounced spatial heterogeneity in sulfur bonding, distinguishing sulfur–sulfur and sulfur–carbon bonds that are inaccessible from spatially averaged spectra. This study establishes sulfur K -edge ptychographic tomography as a potential platform for three-dimensional chemical-state imaging of light-element materials, enabling new nanoscale investigations of functional polymers and energy-related materials.
- Open Access
- 1 January 2026
- Published by International Union of Crystallography (IUCr) in IUCrJ
- Vol. 13 (1) , 11-18
Broadband high-resolution X-ray ptychography system spanning tender to hard X-ray regimes
X-ray ptychography is a high-resolution imaging technique capable of resolving nanoscale structures and probing chemical states. However, despite advances, most conventional X-ray ptychography systems have been designed to operate within a single energy regime, such as hard (> 5 keV), soft (< 2 keV) or tender (2–5 keV) X-rays. We have developed a high-efficiency achromatic ptychographic measurement system on beamline BL10U at NanoTerasu, a 3 GeV synchrotron radiation facility in Japan, that incorporates advanced Kirkpatrick–Baez focusing mirrors and a high-speed CITIUS detector. Utilizing this innovative system, we have successfully reconstructed phase images with a spatial resolution exceeding 50 nm from 200 nm-thick tantalum test charts at X-ray energies of 2.5, 5.0 and 7.5 keV. We have performed energy scans around the Ca and S K edges on CaSO 4 ·2H 2 O particles to demonstrate the spectromicroscopic capabilities of the system. The reconstructed images provide spatially resolved X-ray absorption spectra, revealing distinct edge features. This system not only enables element-specific imaging across the tender to hard X-ray spectrum but is also particularly advantageous for light-element materials, which benefit from enhanced phase contrast in the tender X-ray range. This advancement opens up new possibilities for in situ imaging of complex chemical environments in energy devices and biological specimens.
- 1 January 2026
- Published by International Union of Crystallography (IUCr) in IUCrJ
- Vol. 13 (1) , 11-18
Open AccessBroadband high-resolution X-ray ptychography system spanning tender to hard X-ray regimes
X-ray ptychography is a high-resolution imaging technique capable of resolving nanoscale structures and probing chemical states. However, despite advances, most conventional X-ray ptychography systems have been designed to operate within a single energy regime, such as hard (> 5 keV), soft (< 2 keV) or tender (2–5 keV) X-rays. We have developed a high-efficiency achromatic ptychographic measurement system on beamline BL10U at NanoTerasu, a 3 GeV synchrotron radiation facility in Japan, that incorporates advanced Kirkpatrick–Baez focusing mirrors and a high-speed CITIUS detector. Utilizing this innovative system, we have successfully reconstructed phase images with a spatial resolution exceeding 50 nm from 200 nm-thick tantalum test charts at X-ray energies of 2.5, 5.0 and 7.5 keV. We have performed energy scans around the Ca and S K edges on CaSO 4 ·2H 2 O particles to demonstrate the spectromicroscopic capabilities of the system. The reconstructed images provide spatially resolved X-ray absorption spectra, revealing distinct edge features. This system not only enables element-specific imaging across the tender to hard X-ray spectrum but is also particularly advantageous for light-element materials, which benefit from enhanced phase contrast in the tender X-ray range. This advancement opens up new possibilities for in situ imaging of complex chemical environments in energy devices and biological specimens.
- Open Access
- 3 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (18)
Three-dimensional imaging of CMOS image sensor pixel structures using ptychographic x-ray computed tomography in the tender x-ray regime
Nondestructive three-dimensional imaging of nanoscale features in advanced semiconductor devices is crucial for understanding and improving their performance. In this study, we applied ptychographic x-ray computed tomography in the tender x-ray regime. Using 4 keV x rays at the NanoTerasu BL10U beamline, we visualized the three-dimensional architecture of a state-of-the-art CMOS image sensor with a sub-micrometer pixel pitch. The reconstructed three-dimensional electron density map achieved a spatial resolution of 34.1 nm, clearly resolving key components, such as silicon-based photodiodes and deep trench isolation structures. This achievement demonstrates an effective methodology for analyzing complex light-element-based devices, paving the way for identifying performance-limiting defects and guiding the design of next-generation electronics.
- 3 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (18)
Open AccessThree-dimensional imaging of CMOS image sensor pixel structures using ptychographic x-ray computed tomography in the tender x-ray regime
Nondestructive three-dimensional imaging of nanoscale features in advanced semiconductor devices is crucial for understanding and improving their performance. In this study, we applied ptychographic x-ray computed tomography in the tender x-ray regime. Using 4 keV x rays at the NanoTerasu BL10U beamline, we visualized the three-dimensional architecture of a state-of-the-art CMOS image sensor with a sub-micrometer pixel pitch. The reconstructed three-dimensional electron density map achieved a spatial resolution of 34.1 nm, clearly resolving key components, such as silicon-based photodiodes and deep trench isolation structures. This achievement demonstrates an effective methodology for analyzing complex light-element-based devices, paving the way for identifying performance-limiting defects and guiding the design of next-generation electronics.
- Open Access
- 17 September 2025
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 122 (38)
Spatiotemporal mapping of alloy mesostructure dynamics via multimodal coherent X-ray diffraction imaging
Understanding mesoscale structural dynamics of precipitation-strengthened alloys is essential for optimizing the mechanical performances of these alloys. Herein, we establish a multimodal coherent X-ray diffraction imaging framework for spatiotemporal mapping of mesoscale structural dynamics in precipitation-strengthened alloys. As a demonstrative application, we visualized the structural evolution in Mg 97 Zn 1 Gd 2 during isothermal annealing at 700 K, revealing real-time dynamics of nucleation, growth, and coarsening. Ptychographic reconstruction enabled imaging of microstructural transformations across a wide field of view (~100 μm 2 ) with temporal resolution spanning several hours. We observed decomposition of (Mg, Zn) 3 Gd and concurrent precipitation and coarsening of long-period stacking ordered phases. To resolve local dynamics at finer spatiotemporal scales, we combined dynamic coherent diffraction imaging with X-ray photon correlation spectroscopy, targeting selected regions (~10 μm 2 ) with time resolution down to tens of seconds. This approach revealed the rapid formation of nanoscale precipitates within 10 s after heating, followed by coarsening over several hundred seconds. Additionally, we applied optical flow analysis—a computational method to track motion patterns—to visualize and quantify the nucleation, growth, and coarsening kinetics. The abovementioned findings demonstrate the capability of in situ coherent X-ray techniques to acquire the real-time evolutions of mesoscale structures in complex materials. Our methodology offers a robust framework for investigating dynamic phenomena in diverse material systems, including metals, polymers, and functional nanomaterials, under realistic thermal or mechanical conditions.
- 17 September 2025
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 122 (38)
Open AccessSpatiotemporal mapping of alloy mesostructure dynamics via multimodal coherent X-ray diffraction imaging
Understanding mesoscale structural dynamics of precipitation-strengthened alloys is essential for optimizing the mechanical performances of these alloys. Herein, we establish a multimodal coherent X-ray diffraction imaging framework for spatiotemporal mapping of mesoscale structural dynamics in precipitation-strengthened alloys. As a demonstrative application, we visualized the structural evolution in Mg 97 Zn 1 Gd 2 during isothermal annealing at 700 K, revealing real-time dynamics of nucleation, growth, and coarsening. Ptychographic reconstruction enabled imaging of microstructural transformations across a wide field of view (~100 μm 2 ) with temporal resolution spanning several hours. We observed decomposition of (Mg, Zn) 3 Gd and concurrent precipitation and coarsening of long-period stacking ordered phases. To resolve local dynamics at finer spatiotemporal scales, we combined dynamic coherent diffraction imaging with X-ray photon correlation spectroscopy, targeting selected regions (~10 μm 2 ) with time resolution down to tens of seconds. This approach revealed the rapid formation of nanoscale precipitates within 10 s after heating, followed by coarsening over several hundred seconds. Additionally, we applied optical flow analysis—a computational method to track motion patterns—to visualize and quantify the nucleation, growth, and coarsening kinetics. The abovementioned findings demonstrate the capability of in situ coherent X-ray techniques to acquire the real-time evolutions of mesoscale structures in complex materials. Our methodology offers a robust framework for investigating dynamic phenomena in diverse material systems, including metals, polymers, and functional nanomaterials, under realistic thermal or mechanical conditions.
- Open Access
- 5 August 2025
- Published by American Chemical Society (ACS) in Chemical & Biomedical Imaging
- Vol. 4 (1) , 44-53
Multidimensional Tracking and Clustering of Electrochemical Reactions in the Positive Electrode of Lithium-Ion Batteries via Operando X-ray Nanoscale Chemical Imaging
Understanding heterogeneous electrochemical reactions in the positive electrode of the Li-ion battery is essential for improving battery capacity and fast charging capabilities. Observing these reactions under operando conditions is essential to clarify the relationship between microstructure and chemical heterogeneity during the electrochemical processes. While X-ray nanoimaging is a valuable tool for operando measurements, mitigating X-ray radiation damage poses a significant challenge that requires optimized measurement protocols. In this study, we conducted a comprehensive analysis of the microstructure and chemical state distribution from the electrode to the particle scale using full-field transmission X-ray microscopy combined with X-ray absorption fine-structure spectroscopy (TXM–XAFS). We developed a dedicated operando cell to explore the relationship between microstructure, chemical state during the operando stepped charging process conditions. To mitigate X-ray-induced damage, the beam irradiation time has been optimized, and a coarse-to-fine approach combining quick 2-dimensional TXM–XAFS scans and 3-dimensional computed tomography–TXM–XAFS measurement has been adopted to reduce the overall dose while maintaining multidimensional and high-resolution information acquisition. Our results indicated that the distribution of charge varied among particles within the electrode and was significantly influenced by the proximity to the separator. By employing data clustering with the Gaussian mixture model, we identified factors of inactive domains that impede charge reaction. This analytical approach aids in understanding the factors contributing to reaction stagnation within a complex Li-ion battery, despite the challenges posed by X-ray radiation damage.
- 5 August 2025
- Published by American Chemical Society (ACS) in Chemical & Biomedical Imaging
- Vol. 4 (1) , 44-53
Open AccessMultidimensional Tracking and Clustering of Electrochemical Reactions in the Positive Electrode of Lithium-Ion Batteries via Operando X-ray Nanoscale Chemical Imaging
Understanding heterogeneous electrochemical reactions in the positive electrode of the Li-ion battery is essential for improving battery capacity and fast charging capabilities. Observing these reactions under operando conditions is essential to clarify the relationship between microstructure and chemical heterogeneity during the electrochemical processes. While X-ray nanoimaging is a valuable tool for operando measurements, mitigating X-ray radiation damage poses a significant challenge that requires optimized measurement protocols. In this study, we conducted a comprehensive analysis of the microstructure and chemical state distribution from the electrode to the particle scale using full-field transmission X-ray microscopy combined with X-ray absorption fine-structure spectroscopy (TXM–XAFS). We developed a dedicated operando cell to explore the relationship between microstructure, chemical state during the operando stepped charging process conditions. To mitigate X-ray-induced damage, the beam irradiation time has been optimized, and a coarse-to-fine approach combining quick 2-dimensional TXM–XAFS scans and 3-dimensional computed tomography–TXM–XAFS measurement has been adopted to reduce the overall dose while maintaining multidimensional and high-resolution information acquisition. Our results indicated that the distribution of charge varied among particles within the electrode and was significantly influenced by the proximity to the separator. By employing data clustering with the Gaussian mixture model, we identified factors of inactive domains that impede charge reaction. This analytical approach aids in understanding the factors contributing to reaction stagnation within a complex Li-ion battery, despite the challenges posed by X-ray radiation damage.
- Open Access
- 12 March 2025
- Published by Springer Nature in npj Computational Materials
- Vol. 11 (1) , 1-14
PID3Net: a deep learning approach for single-shot coherent X-ray diffraction imaging of dynamic phenomena
- 12 March 2025
- Published by Springer Nature in npj Computational Materials
- Vol. 11 (1) , 1-14
Open AccessPID3Net: a deep learning approach for single-shot coherent X-ray diffraction imaging of dynamic phenomena