ASAkhilesh Kumar Singh

Akhilesh Kumar Singh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Akhilesh Kumar Singh has a total of 117 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Strong Magnetoelectric Coupling in Lead‐Free 0.70[0.925Bi 0.5 (Na 0.8 K 0.2 ) 0.5 TiO 3 –0.075(Ba 0.7 Sr 0.3 )TiO 3 ]–0.30CoMn 0.2 Fe 1.8 O 4 Multiferroic Composite

    by Prosun Mondal, Srishti Paliwal, Akhilesh Kumar Singh

    0.70[0.925Bi 0.5 (Na 0.8 K 0.2 ) 0.5 TiO 3 –0.075(Ba 0.7 Sr 0.3 )TiO 3 ]–0.30CoMn 0.2 Fe 1.8 O 4 (0.70BNKTBST–0.30CMFO) multiferroic composite was developed by the conventional solid‐state ceramic method to investigate the correlation between its constituent phases, interfacial strain transfer, and strain‐mediated magnetoelectric (ME) coupling. X‐ray diffraction and Rietveld refinement confirmed the coexistence of the rhombohedral R3c BNKTBST piezoelectric phase and the cubic spinel Fdm CMFO magnetic phases. The dense and uniformly distributed microstructure facilitates effective interfacial strain transfer between the piezoelectric and magnetic phases. The incorporation of CMFO significantly enhances the dielectric response, yielding a maximum dielectric permittivity of 5417 at 284 °C. Ferroelectric measurements reveal the transformation of BNKTBST from an antiferroelectric‐like/ergodic relaxor state toward a more stable ferroelectric state, characterized by a remanent polarization of 11.11 μC/cm 2 and a coercive field of 18.85 kV/cm and an electrostrain of ~0.06%. At 300 K, the composite exhibits a saturation magnetization of 20.86 emu/gm with ferromagnetic and superparamagnetic contributions of 60.56% and 39.44%, respectively. The synergistic interaction between the piezoelectric BNKTBST and magnetostrictive CMFO phases results in a maximum ME coupling coefficient of 8.34 mV/cm‐Oe at a dc bias field of ~700–800 Oe. Enhanced ME response indicates strain‐mediated coupling between constituent phases, highlighting the lead‐free composite’s potential for multifunctional magnetoelectric applications.

  • Off-stoichiometry effects on crystal structure, microstructure, dielectric and ferroelectric properties of (1-x)Bi(Mg3/4W1/4)O3-xPbTiO3 ceramics

    by Narendra Kumar Verma, Chandra Bhal Singh, Srishti Paliwal, Akhilesh Kumar Singh

  • Composition‐Driven Symmetry Manipulation and Correlation With Physical Properties of K 0.5 Na 0.5 NbO 3 –BiScO 3 Ferroelectric

    by Abhisikta Sahu, Satyaranjan Sahoo, Anupam Mishra, Priya Choudhary, Sudhindra Rayaprol, Akhilesh Kumar Singh, Dhiren K. Pradhan, Shalini Kumari, Md. Mijanur Rahaman, Reji Thomas, et al.

    A comprehensive investigation of composition‐driven symmetry modulation and the structure–property correlation in the lead‐free ferroelectric (1− x )K 0 . 5 Na 0 . 5 NbO 3 – x BiScO 3 (KNN‐ x BS) (0 ≤ x ≤ 0.05) system is discussed. Structural analysis using Rietveld refinement combined with Raman spectroscopy reveals a systematic evolution of the room‐temperature crystal symmetry from orthorhombic ( Amm 2, x = 0) to the coexistence of orthorhombic + monoclinic (0.005 ≤ x ≤ 0.010), to single‐phase monoclinic ( Pm , 0.015 ≤ x ≤ 0.020), and finally to coexistence of monoclinic + cubic ( x ≥ 0.030). Microstructural analysis demonstrates the systematic decrease of grain size with BiScO 3 substitution. Temperature‐dependent dielectric measurements demonstrated a progressive downward shift and broadening of the orthorhombic‐tetragonal ( T O – T ) and tetragonal‐cubic ( T T – C ) transitions with increasing x , with the T O – T transition shifting below room temperature for x ≥ 0.015. The composition x = 0.015 exhibits optimal functional response, with d 33 = 154 pC/N, ε r = 921 at T C , and 2 P r = 68 µC/cm 2 , within the monoclinic stability region. These findings elucidate the role of BiScO 3 ‐induced structural heterogeneity and phase coexistence in governing property enhancement in the modified KNN system. The study also provides insights into phase‐boundary engineering strategies in lead‐free perovskite ferroelectrics.

  • Open Access

    Nano-Structured FeBO3 as a Cation Intercalating Pseudocapacitive Negative Electrode for the fabrication of Dual-Ion Aqueous Super Battery

    by Ankit Raj, Mahatim Singh, Abhijeet Kumar Singh, Krishna Gopal Nigam, Soham Mukherjee, Asha Gupta, Akhilesh Kumar Singh, Preetam Singh

    Nano-structured mesoporous FeBO3 is reported here as a cation (K+) intercalating, redox-mediated pseudocapacitive electrode for aqueous hybrid energy-storage systems. In a three-electrode configuration, FeBO3 delivers a high specific capacity of 217 mAh g-1 at 1 A g-1, along with a specific capacitance of 1070 F g-1 at 1 mV s-1. Kinetic analysis reveals a mixed charge-storage mechanism, comprising approximately 21% surface-controlled capacitive contribution and 79% diffusion-controlled intercalation, indicating dominant redox-mediated pseudocapacitance governed by reversible K⁺ insertion. The electrode exhibits excellent durability, retaining 82% of its initial capacity with ~96% Coulombic efficiency over 2000 cycles at 2 A g-1. To demonstrate practical applicability, a dual-ion intercalating aqueous super battery was assembled using OH- intercalating anhydrous Ni0.5Co0.5C2O4 as the positive electrode and K+ intercalating nano FeBO3 as the negative electrode, separated by a glass fibre separator. The resulting coin-cell device delivers a specific capacity of 38 mAh g-1 at 1 A g-1, achieving an energy density of 28 Wh kg-1 and a power density of 725 W kg-1. After 2000 charge-discharge cycles, the device maintains 63% capacity retention with ~99% Coulombic efficiency, confirming long-term stability. This work introduces iron borate as a previously unexplored pseudocapacitive electrode material for aqueous energy storage systems and establishes a dual-ion intercalation strategy that effectively bridges battery-type energy density with supercapacitor-level power capability, making it highly suitable for applications such as grid-level energy buffering, renewable energy smoothing, and power-spike mitigation. In addition to device demonstration, this study attempts to investigate electrochemically induced structural evolution of FeBO3 during cycling and provides insight into the origin of moderate capacity fading, with the aim of identifying design principles to improve long-term stability in alkaline aqueous energy storage systems.

  • Open Access

    La₀.₅Na₀.₅TiO₃: A Wide Bandgap Semiconducting, High k Dielectric Material for Electromagnetic Interference (EMI)Shielding Applications

    by Soham Mukherjee, Rajesh Kumar, Prosun Mondal, Kundan Kumar, Akhilesh Kumar Singh, Preetam Singh

    Electromagnetic interference (EMI), especially in the Ku band (12–18 GHz), resulted due to ever increasing wireless and satellite technologies generate serious concern and creates a strong need for efficient, lead-free ceramic shields. This work presents a comprehensive study of lanthanum sodium titanate, La₀.₅Na₀.₅TiO₃ (LNTO), a cubic perovskite evaluated as a single‑phase to develop a lead-free EMI shielding material. La₀.₅Na₀.₅TiO₃ (LNTO) displays a direct band gap of 3.29 eV, making it a wide-band gap semiconductor to be explored for unusual dielectric properties. At room temperature, LNTO exhibits a high dielectric constant (ε′ ≈ 317 at 1.2 kHz, decreasing to ≈10² at MHz frequencies) and a loss tangent that falls from large values at low frequency to ≲0.3 in the MHz range, characteristic of Maxwell–Wagner interfacial polarization and internal barrier layer capacitor behavior. Vector network analysis in the Ku band demonstrates broadband EMI shielding, with a maximum total shielding effectiveness of about 36 dB near 14 GHz for 1.5‑mm‑thick samples—well above the 10 dB criterion for practical shielding—and a minimum reflection loss of roughly −17 dB around 16 GHz. Decomposition of the shielding contributions and impedance matching analysis show a transition from reflection-dominated attenuation at 12–14 GHz to increasingly absorption-assisted, impedance‑matched dissipation with sub-millimetre skin depth at higher frequencies. These results establish single-phase, lead-free cubic perovskite La₀.₅Na₀.₅TiO₃ (LNTO) as a structurally robust, high-k dielectric ceramic that effectively couples relaxor-like polarization dynamics with strong Ku‑band EMI shielding, making it a promising candidate for environmentally benign microwave and high‑frequency electronic applications.

  • Temperature-Triggered Structural Boundary between Nitrogen-Doped Carbon Dots and Graphene Quantum Dots

    by Vishwa Pratap Singh, Akhilesh Kumar Singh

    Nitrogen-doped carbon dots (N-CDs) and nitrogen-doped graphene quantum dots (N-GQDs) are closely related carbon nanostructures whose distinction is often obscured by variations in synthesis chemistry. Here, we elucidate the structural boundary between these two materials by synthesizing N-CDs and N-GQDs through an identical citric acid–urea solvothermal route in dimethylformamide, differing only in reaction temperature. Electron microscopy and selected-area electron diffraction show that N-CDs consist of predominantly amorphous carbon frameworks, whereas N-GQDs exhibit nanocrystalline graphene domains with well-defined lattice fringes and graphitic diffraction rings. Optical absorption and photoluminescence measurements reveal stronger π–π* transitions and reduced emission broadening in N-GQDs, consistent with enhanced sp2 conjugation. Temperature- and frequency-dependent dielectric measurements further distinguish the two systems, with N-CDs displaying stronger dielectric dispersion arising from interfacial and defect-related polarization. The results establish distinct structural outcomes of a common chemical pathway and clarify their classification based on correlated structural, optical, and dielectric signatures.


  • Enhanced photodetection performance in ferroelectric-driven magnetron sputtered thin film p-Si/Ba(Pr)Ti(Mo,Nb)O3/Ag devices

    by Deep Mala, Chandra Bhal Singh, Sandeep Dahiya, Akhilesh Kumar Singh, Bhola Nath Pal, Km Alka, Hari Krishna Singh