Zikang Tong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Zikang Tong has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Juan Rivas-Davila
Department of Electrical Engineering, Stanford University, Stanford, CA, USA
8 shared publications - James D. Plummer
Department of Electrical Engineering, Stanford University, Stanford, CA, USA
3 shared publications - Lei Gu
Electrical Engineering Department, Stanford University, Stanford, CA, USA
3 shared publications - Grayson Zulauf
Power Electronic Systems Laboratory, ETH Zurich, Zurich, Switzerland
2 shared publications - Jiale Xu
Department of Electrical Engineering, Stanford University, Stanford, CA, USA
2 shared publications Jaume Roig-Guitart
ON Semiconductor, 9700 Oudenaarde, Belgium
1 shared publication
Latest Publications
- 2 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 23 (3) , 72-79
Class DE Switch-Mode Power Amplifier Using GaN Power HEMTs: High-Efficiency Power Amplifier for 13.56 MHz
High-efficiency power amplifiers (PAs) are critical for various applications that require high power density, portability, and effortless thermal management. Historically, these types of PAs, operating in the tens-of-megahertz range in the industrial, scientific, and medical bands, were equipped for transmitters for fixed radiocommunication services, RF heating, and plasma ignition [1] , [2] . Today, applications have expanded to wireless power transmission for biomedical devices and charging for consumer electronics and smart vehicles [3] . In this article, we present the first-place design for the Student Design Competition (SDC) High-Efficiency Power Amplifier for 13.56 MHz in the 2021 IEEE Microwave Theory and Techniques Society International Microwave Symposium (IMS) in Atlanta, Georgia.
- 2 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 23 (3) , 72-79
Class DE Switch-Mode Power Amplifier Using GaN Power HEMTs: High-Efficiency Power Amplifier for 13.56 MHz
High-efficiency power amplifiers (PAs) are critical for various applications that require high power density, portability, and effortless thermal management. Historically, these types of PAs, operating in the tens-of-megahertz range in the industrial, scientific, and medical bands, were equipped for transmitters for fixed radiocommunication services, RF heating, and plasma ignition [1] , [2] . Today, applications have expanded to wireless power transmission for biomedical devices and charging for consumer electronics and smart vehicles [3] . In this article, we present the first-place design for the Student Design Competition (SDC) High-Efficiency Power Amplifier for 13.56 MHz in the 2021 IEEE Microwave Theory and Techniques Society International Microwave Symposium (IMS) in Atlanta, Georgia.
- Open Access
- 27 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 3, 84-92
1 kW MHz Wideband Class E Power Amplifier
Class E power amplifiers are widely used in high-frequency applications due to their simplicity and use of only one ground-referenced switch. However, Class E power amplifiers are usually tuned to operate at a fixed frequency due to their resonant nature. Extending the bandwidth of these switch-mode power amplifiers is beneficial in many applications, such as plasma generators and wireless power transfer systems. In this paper, we present a 1 kW wideband Class E power amplifier using Silicon Carbide (SiC) MOSFETs that achieves 93% efficiency at 13.56 MHz with a bandwidth of $\pm$ 1 MHz. We incorporate a reactance compensation network in the output loading stage to achieve wideband operation; design a custom gate drive circuit to reduce the gate power loss and improve thermal performance compared to using a gate driver IC. The total gate power of one SiC MOSFET is measured to be 1.55 W at 13.56 MHz.
- 27 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 3, 84-92
Open Access1 kW MHz Wideband Class E Power Amplifier
Class E power amplifiers are widely used in high-frequency applications due to their simplicity and use of only one ground-referenced switch. However, Class E power amplifiers are usually tuned to operate at a fixed frequency due to their resonant nature. Extending the bandwidth of these switch-mode power amplifiers is beneficial in many applications, such as plasma generators and wireless power transfer systems. In this paper, we present a 1 kW wideband Class E power amplifier using Silicon Carbide (SiC) MOSFETs that achieves 93% efficiency at 13.56 MHz with a bandwidth of $\pm$ 1 MHz. We incorporate a reactance compensation network in the output loading stage to achieve wideband operation; design a custom gate drive circuit to reduce the gate power loss and improve thermal performance compared to using a gate driver IC. The total gate power of one SiC MOSFET is measured to be 1.55 W at 13.56 MHz.
- 24 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (6) , 5724-5734
Wideband PPT Class $\Phi _2$ Inverter Using Phase-Switched Impedance Modulation and Reactance CompensationClass $\boldsymbol{\Phi _2}$ is a suitable power amplifier (PA) topology for applications that demand low device voltage stress and simple gate driving. The push–pull with T network (PPT) version of this architecture can be advantageous over a conventional single-ended $\boldsymbol{\Phi _2}$ due to higher power capabilities through interleaving and simple closed-form design equations. The downside with this and many other switch-mode PAs is that they perform efficiently only at a single frequency with the power degrading outside the nominal point of operation. To improve upon this issue, we incorporate a phase-switched impedance modulation variable capacitor and a reactance compensation network so that the PPT $\boldsymbol{\Phi _2}$ can function across broadband. We experimentally demonstrate a 300-W PA for a 50- ${\Omega }$ load impedance using silicon devices. The PA achieves above 90% efficiency over approximately a 30% fractional bandwidth. The PA can also operate across broadband with light loads, where above 80% efficiency is maintained for up to five times higher load resistances. This switch-mode PA is one of the first to demonstrate such performance under load variation and across a wide bandwidth.
- 24 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (6) , 5724-5734
Wideband PPT Class $\Phi _2$ Inverter Using Phase-Switched Impedance Modulation and Reactance CompensationClass $\boldsymbol{\Phi _2}$ is a suitable power amplifier (PA) topology for applications that demand low device voltage stress and simple gate driving. The push–pull with T network (PPT) version of this architecture can be advantageous over a conventional single-ended $\boldsymbol{\Phi _2}$ due to higher power capabilities through interleaving and simple closed-form design equations. The downside with this and many other switch-mode PAs is that they perform efficiently only at a single frequency with the power degrading outside the nominal point of operation. To improve upon this issue, we incorporate a phase-switched impedance modulation variable capacitor and a reactance compensation network so that the PPT $\boldsymbol{\Phi _2}$ can function across broadband. We experimentally demonstrate a 300-W PA for a 50- ${\Omega }$ load impedance using silicon devices. The PA achieves above 90% efficiency over approximately a 30% fractional bandwidth. The PA can also operate across broadband with light loads, where above 80% efficiency is maintained for up to five times higher load resistances. This switch-mode PA is one of the first to demonstrate such performance under load variation and across a wide bandwidth.
- 28 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 9 (4) , 4082-4095
Origins of Soft-SwitchingCossLosses in SiC Power MOSFETs and Diodes for Resonant Converter Applications
The recent development and commercialization of wide bandgap (WBG) power semiconductors, specifically gallium nitride (GaN) and silicon carbide (SiC), has driven the increase in switching frequency for soft-switching power converters like the Class E, Class Φ2, and Class DE resonant inverters and rectifiers. However, prior literature has characterized numerous commercial GaN and SiC devices using the Sawyer-Tower circuit and discovered significant large-signal charge-voltage hysteresis of the Coss. This Coss hysteresis, equivalent to off-state energy loss, is highly dependent on the frequency and voltage across the device, hindering the efficiency and performance of MHz range soft-switched converters. This paper is the first to explain the origin of the Coss loss in SiC power devices as charging and discharging conduction loss at the termination of the device. The loss characteristics relative to operating voltage, frequency, dV=dt, and temperature are dictated by incomplete ionization. Incomplete ionization also highlights a significant inconsistency between the large-signal Coss behavior and small-signal behavior, which is often the model used in manufacturers’ datasheets and SPICE simulations. The large-signal charge-voltage behavior is transient, where the charge in the Coss depends on the rate of the voltage swing across the device. We validate these hypotheses through mixed-mode simulations using Sentaurus® Technology Computer-Aided Design (TCAD) and experimentally using commercial and custom SiC devices.
- 28 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 9 (4) , 4082-4095
Origins of Soft-SwitchingCossLosses in SiC Power MOSFETs and Diodes for Resonant Converter Applications
The recent development and commercialization of wide bandgap (WBG) power semiconductors, specifically gallium nitride (GaN) and silicon carbide (SiC), has driven the increase in switching frequency for soft-switching power converters like the Class E, Class Φ2, and Class DE resonant inverters and rectifiers. However, prior literature has characterized numerous commercial GaN and SiC devices using the Sawyer-Tower circuit and discovered significant large-signal charge-voltage hysteresis of the Coss. This Coss hysteresis, equivalent to off-state energy loss, is highly dependent on the frequency and voltage across the device, hindering the efficiency and performance of MHz range soft-switched converters. This paper is the first to explain the origin of the Coss loss in SiC power devices as charging and discharging conduction loss at the termination of the device. The loss characteristics relative to operating voltage, frequency, dV=dt, and temperature are dictated by incomplete ionization. Incomplete ionization also highlights a significant inconsistency between the large-signal Coss behavior and small-signal behavior, which is often the model used in manufacturers’ datasheets and SPICE simulations. The large-signal charge-voltage behavior is transient, where the charge in the Coss depends on the rate of the voltage swing across the device. We validate these hypotheses through mixed-mode simulations using Sentaurus® Technology Computer-Aided Design (TCAD) and experimentally using commercial and custom SiC devices.
- 6 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (8) , 8472-8489
Design and Fabrication of Three-Dimensional Printed Air-Core Transformers for High-Frequency Power Applications
This article presents various designs of toroidal air-core transformers utilizing a 3-D printing and electroplating fabrication methodology. For certain applications and switching frequency regimes, limitations in core-based magnetics force circuit designers to use air-core components, which are conventionally wire-wound, and thus, constrained to simple structures with poor copper coverage. 3-D printing offers a solution to this constraint and provides more flexibility for transformer designs. This article includes design calculations, finite-element method (FEM) simulations, and loss analysis for three different toroidal transformer designs: one which features nested toroids, coupling their N 2 flux, the second which uses stacked toroids, coupling the one-turn flux, and the third which interleaves two windings. Furthermore, the manufacturing procedure presented in this article allows for accurate modeling of the transformer's inductance matrix, which is advantageous over hand-wound air-core components. Additionally, we provide experimental demonstrations, including the implementation of these transformers in 100-W, 30-MHz resonant converters. Lastly, COMSOL FEM design automation MATLAB scripts for the various inductors and transformers discussed in this article are publicly available in the paper by Z. Tong (2019), allowing for fast parametric modeling of magnetic designs.
- 6 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (8) , 8472-8489
Design and Fabrication of Three-Dimensional Printed Air-Core Transformers for High-Frequency Power Applications
This article presents various designs of toroidal air-core transformers utilizing a 3-D printing and electroplating fabrication methodology. For certain applications and switching frequency regimes, limitations in core-based magnetics force circuit designers to use air-core components, which are conventionally wire-wound, and thus, constrained to simple structures with poor copper coverage. 3-D printing offers a solution to this constraint and provides more flexibility for transformer designs. This article includes design calculations, finite-element method (FEM) simulations, and loss analysis for three different toroidal transformer designs: one which features nested toroids, coupling their N 2 flux, the second which uses stacked toroids, coupling the one-turn flux, and the third which interleaves two windings. Furthermore, the manufacturing procedure presented in this article allows for accurate modeling of the transformer's inductance matrix, which is advantageous over hand-wound air-core components. Additionally, we provide experimental demonstrations, including the implementation of these transformers in 100-W, 30-MHz resonant converters. Lastly, COMSOL FEM design automation MATLAB scripts for the various inductors and transformers discussed in this article are publicly available in the paper by Z. Tong (2019), allowing for fast parametric modeling of magnetic designs.
- 12 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (12) , 12181-12192
On the Techniques to Utilize SiC Power Devices in High- and Very High-Frequency Power Converters
In this paper, we explore the challenges of implementing resonant converters using silicon carbide (SiC) power devices at high frequency: namely, the issue of high parasitic inductance packages and the ability to drive and enhance the mosfet at these frequencies. Although power circuit designers have many alternative device technologies to choose from, such as silicon and gallium nitride materials, SiC devices have several advantageous attributes especially in high power applications. As a solution, we study the device performance and parasitics of SiC mosfets in different packaging schemes. We further offer a solution to the challenges of driving SiC devices by demonstrating a multiresonant gate driver and use this scheme to drive an SiC mosfet at 30 MHz and a SiC JFET at 13.56 MHz in a class-E inverter, achieving 85.7% drain efficiency for the mosfet and 93.8% for the JFET.
- 12 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (12) , 12181-12192
On the Techniques to Utilize SiC Power Devices in High- and Very High-Frequency Power Converters
In this paper, we explore the challenges of implementing resonant converters using silicon carbide (SiC) power devices at high frequency: namely, the issue of high parasitic inductance packages and the ability to drive and enhance the mosfet at these frequencies. Although power circuit designers have many alternative device technologies to choose from, such as silicon and gallium nitride materials, SiC devices have several advantageous attributes especially in high power applications. As a solution, we study the device performance and parasitics of SiC mosfets in different packaging schemes. We further offer a solution to the challenges of driving SiC devices by demonstrating a multiresonant gate driver and use this scheme to drive an SiC mosfet at 30 MHz and a SiC JFET at 13.56 MHz in a class-E inverter, achieving 85.7% drain efficiency for the mosfet and 93.8% for the JFET.
- 11 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 7 (2) , 865-878
Output Capacitance Loss Characterization of Silicon Carbide Schottky Diodes
In high-frequency (HF) and very-high-frequency (VHF) rectifiers, silicon carbide (SiC) Schottky diodes exhibit higher losses compared to what is reported in manufacturer-provided simulation models, with additional power loss stemming from energy dissipation during the charging and discharging of the junction output capacitance (CJ). Because these losses are not included in manufacturer simulation models and have not been well-studied for commercially available SiC Schottky diodes, we have experimentally measured them using the Sawyer-Tower circuit. From these measurements, we compare the losses across manufacturers, current rating, generation, voltage rating, and packaging. We then demonstrate the performance of these devices on a 20-MHz class-DE rectifier and compare their power dissipation from the simulation and experimental measurements. Finally, by incorporating these losses in device power dissipation calculations in various rectifier topologies, we propose suggestions on device selection to optimize converter efficiencies.
- 11 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 7 (2) , 865-878
Output Capacitance Loss Characterization of Silicon Carbide Schottky Diodes
In high-frequency (HF) and very-high-frequency (VHF) rectifiers, silicon carbide (SiC) Schottky diodes exhibit higher losses compared to what is reported in manufacturer-provided simulation models, with additional power loss stemming from energy dissipation during the charging and discharging of the junction output capacitance (CJ). Because these losses are not included in manufacturer simulation models and have not been well-studied for commercially available SiC Schottky diodes, we have experimentally measured them using the Sawyer-Tower circuit. From these measurements, we compare the losses across manufacturers, current rating, generation, voltage rating, and packaging. We then demonstrate the performance of these devices on a 20-MHz class-DE rectifier and compare their power dissipation from the simulation and experimental measurements. Finally, by incorporating these losses in device power dissipation calculations in various rectifier topologies, we propose suggestions on device selection to optimize converter efficiencies.
- 21 February 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 67 (2) , 1405-1414
A Multiresonant Gate Driver for High-Frequency Resonant Converters
This paper presents the design and implementation of a High-Frequency/Very-High-Frequency (HF/VHF) multi-resonant gate drive circuit. The design procedure outlined here is greatly simplified compared with other VHF self-oscillating multi-resonant gate drivers presented in previous works. The proposed circuit can reduce the long start-up time required in a self-oscillating resonant gate drive circuit and utilize the fast transient capability of VHF converters better. We demonstrate a prototype resonant gate driver, which reduces up to 60% of the gate driving power in a 20 MHz 32 W Class-E power amplifier using a Si MOSFET. The proposed technique could also drive a high-voltage rated SiC MOSFET at 30 MHz with a slew-rate of 2.5 V/ns at the gate, while an integrated hard-switching gate driver only provides a 1.8 V/ns slew-rate and is five times less efficient than the proposed resonant gate driver.
- 21 February 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 67 (2) , 1405-1414
A Multiresonant Gate Driver for High-Frequency Resonant Converters
This paper presents the design and implementation of a High-Frequency/Very-High-Frequency (HF/VHF) multi-resonant gate drive circuit. The design procedure outlined here is greatly simplified compared with other VHF self-oscillating multi-resonant gate drivers presented in previous works. The proposed circuit can reduce the long start-up time required in a self-oscillating resonant gate drive circuit and utilize the fast transient capability of VHF converters better. We demonstrate a prototype resonant gate driver, which reduces up to 60% of the gate driving power in a 20 MHz 32 W Class-E power amplifier using a Si MOSFET. The proposed technique could also drive a high-voltage rated SiC MOSFET at 30 MHz with a slew-rate of 2.5 V/ns at the gate, while an integrated hard-switching gate driver only provides a 1.8 V/ns slew-rate and is five times less efficient than the proposed resonant gate driver.
- 8 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (7) , 6818-6833
Active Power Device Selection in High- and Very-High-Frequency Power Converters
This paper aims to provide a road map for selecting power devices in soft-switched, MHz-frequency power converters. Minimizing C $_{\mathrm{OSS}}$ losses, which occur when charging and discharging the parasitic output capacitor of power semiconductors, is critical to efficient operation. These losses are excluded from manufacturer-provided information and measurements are either sparse or not reported at all in existing literature. We report the first high-frequency C $_{\mathrm{OSS}}$ loss data from Silicon Carbide (SiC) power MOSFETs, with a range of devices tested from 1-35 MHz and up to 800~V. In contrast to GaN HEMTs, C $_{\mathrm{OSS}}$ losses in SiC MOSFETs do not increase with dV/dt at these frequencies. 3-10% of the stored energy is dissipated in the measured SiC MOSFETs. We report new C $_{\mathrm{OSS}}$ loss measurements for vertical silicon MOSFETs and expand on existing measurements for superjunctions, finding high variance in C $_{\mathrm{OSS}}$ losses between devices for both constructions. High C $_{\mathrm{OSS}}$ losses preclude the tested silicon MOSFETs from efficient operation at MHz frequencies. Lastly, we compare devices in soft-switched applications using a loss calculation that includes these C $_{\mathrm{OSS}}$ losses, and demonstrate a 100 W, 17 MHz DC-RF inverter using a custom-packaged SiC MOSFET.- 8 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (7) , 6818-6833
Active Power Device Selection in High- and Very-High-Frequency Power Converters
This paper aims to provide a road map for selecting power devices in soft-switched, MHz-frequency power converters. Minimizing C $_{\mathrm{OSS}}$ losses, which occur when charging and discharging the parasitic output capacitor of power semiconductors, is critical to efficient operation. These losses are excluded from manufacturer-provided information and measurements are either sparse or not reported at all in existing literature. We report the first high-frequency C $_{\mathrm{OSS}}$ loss data from Silicon Carbide (SiC) power MOSFETs, with a range of devices tested from 1-35 MHz and up to 800~V. In contrast to GaN HEMTs, C $_{\mathrm{OSS}}$ losses in SiC MOSFETs do not increase with dV/dt at these frequencies. 3-10% of the stored energy is dissipated in the measured SiC MOSFETs. We report new C $_{\mathrm{OSS}}$ loss measurements for vertical silicon MOSFETs and expand on existing measurements for superjunctions, finding high variance in C $_{\mathrm{OSS}}$ losses between devices for both constructions. High C $_{\mathrm{OSS}}$ losses preclude the tested silicon MOSFETs from efficient operation at MHz frequencies. Lastly, we compare devices in soft-switched applications using a loss calculation that includes these C $_{\mathrm{OSS}}$ losses, and demonstrate a 100 W, 17 MHz DC-RF inverter using a custom-packaged SiC MOSFET.