Keyan Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Keyan Shi has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Dehong Xu
Zhejiang University
6 shared publications - Jinyi Deng
College of Electrical Engineering, Institute of Power Electronics, Zhejiang University, Hangzhou, China
3 shared publications - Changsheng Hu
College of Electrical Engineering, Zhejiang University, Hangzhou, China
2 shared publications - Min Chen
College of Electrical Engineering, Institute of Power Electronics, Zhejiang University, Hangzhou, China
2 shared publications An Zhao
1 shared publication- Haijin Li
Beijing Institute of Spacecraft System Engineering, Beijing, China
1 shared publication
Latest Publications
- 17 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (3) , 3951-3964
A ZVS-PWM Scheme for Three-Phase Active-Clamping T-Type Inverters
For increasing power density and other performance of T-type three-level inverters, the soft-switching technique is studied. This article proposes a novel zero-voltage switching (ZVS) PWM scheme for active clamping three-phase T-type inverters, which can realize the ZVS operation of all switches and reduce the switching loss. The proposed ZVS PWM scheme is evolved from discontinuous PWM and modified for the requirements of T-type inverter. It enables all switches, including main switches and auxiliary switches, operate at a fixed frequency. However, a larger current on the power semiconductor devices occurs at 60° zone transition. To suppress this current surge, the carriers used in the ZVS PWM scheme are phase shifted. Finally, the novel ZVS PWM scheme is verified on a 10 kW/150 kHz SiC-based ZVS T-type inverter prototype.
- 17 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (3) , 3951-3964
A ZVS-PWM Scheme for Three-Phase Active-Clamping T-Type Inverters
For increasing power density and other performance of T-type three-level inverters, the soft-switching technique is studied. This article proposes a novel zero-voltage switching (ZVS) PWM scheme for active clamping three-phase T-type inverters, which can realize the ZVS operation of all switches and reduce the switching loss. The proposed ZVS PWM scheme is evolved from discontinuous PWM and modified for the requirements of T-type inverter. It enables all switches, including main switches and auxiliary switches, operate at a fixed frequency. However, a larger current on the power semiconductor devices occurs at 60° zone transition. To suppress this current surge, the carriers used in the ZVS PWM scheme are phase shifted. Finally, the novel ZVS PWM scheme is verified on a 10 kW/150 kHz SiC-based ZVS T-type inverter prototype.
- 18 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (6) , 6495-6510
Analysis and Design of Zero-Voltage-Switching Multiphase AC/DC Converters
In this paper, the generic analysis and design of Zero-Voltage-Switching (ZVS) multi-phase AC/DC converters are proposed. With the Edge Aligned PWM (EA-PWM) scheme, all switches of ZVS multi-phase AC/DC converters can realize ZVS operation. Besides, the switching frequency is fixed and the auxiliary switch only operates once in each switching period. Its operation stages in a switching cycle are analyzed and a generic ZVS condition is derived. Based on the proposed theory, a ZVS two-stage three-phase photovoltaic (PV) inverter is investigated, which is regarded as a 5-phase converter. Its ZVS condition under different working conditions is discussed. Finally, a 10kW prototype with 150kHz switching frequency of the ZVS two-stage three-phase PV inverter is built and the experiment results are given to verify the analysis. In addition, the extension of the ZVS multi-phase converter in different applications is introduced.
- 18 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (6) , 6495-6510
Analysis and Design of Zero-Voltage-Switching Multiphase AC/DC Converters
In this paper, the generic analysis and design of Zero-Voltage-Switching (ZVS) multi-phase AC/DC converters are proposed. With the Edge Aligned PWM (EA-PWM) scheme, all switches of ZVS multi-phase AC/DC converters can realize ZVS operation. Besides, the switching frequency is fixed and the auxiliary switch only operates once in each switching period. Its operation stages in a switching cycle are analyzed and a generic ZVS condition is derived. Based on the proposed theory, a ZVS two-stage three-phase photovoltaic (PV) inverter is investigated, which is regarded as a 5-phase converter. Its ZVS condition under different working conditions is discussed. Finally, a 10kW prototype with 150kHz switching frequency of the ZVS two-stage three-phase PV inverter is built and the experiment results are given to verify the analysis. In addition, the extension of the ZVS multi-phase converter in different applications is introduced.
- 1 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (4) , 3617-3630
A DC Solid-State Transformer With DC Fault Ride-Through Capability
This article investigates a dc solid-state transformer (DCSST) with dc fault ride-through (FRT) capability for medium-voltage dc (MVDC) systems. The FRT requirement for DCSST in dc grid is investigated. Short-circuit fault clearance on the medium-voltage (MV) side is realized by introducing full-bridge converters with cascaded dc converter modules on the MV side of the DCSST. The FRT strategy under typical voltage sags is analyzed. Factors affecting the fault clearing and system recovery are considered, including the number of full-bridge converters, the values of dc inductance, and the dc-link bus voltage. The concept is verified with both simulations and experiments.
- 1 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (4) , 3617-3630
A DC Solid-State Transformer With DC Fault Ride-Through Capability
This article investigates a dc solid-state transformer (DCSST) with dc fault ride-through (FRT) capability for medium-voltage dc (MVDC) systems. The FRT requirement for DCSST in dc grid is investigated. Short-circuit fault clearance on the medium-voltage (MV) side is realized by introducing full-bridge converters with cascaded dc converter modules on the MV side of the DCSST. The FRT strategy under typical voltage sags is analyzed. Factors affecting the fault clearing and system recovery are considered, including the number of full-bridge converters, the values of dc inductance, and the dc-link bus voltage. The concept is verified with both simulations and experiments.
- Open Access
- 23 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 1, 250-259
A General Pulse Width Modulation Method for Zero-Voltage-Switching Active-clamping Three-phase Power Converters: Edge Aligned Pulse Width Modulation (EA-PWM)
A general PWM method for soft-switching three-phase power converters—Edge Aligned PWM (EA-PWM) is proposed. It aligns all the high loss commutation instants of the converter bridges in a switching cycle at the same instant so that all the switches of the three-phase converter can realize zero-voltage-switching (ZVS) with the help of the resonant auxiliary circuit which operates once each switching cycle. EA-PWM scheme for ZVS active-clamping three-phase converter is introduced. ZVS condition and voltage stress of the converters is derived. EA-PWM can adapt to various modulation methods such as SPWM, Harmonic Injected SPWM, Continuous Pulse Width Modulation (CPWM), Discontinuous Pulse Width Modulation (DPWM), etc. The ZVS condition of three-phase CAC converter are discussed. Finally, EA-PWM scheme is verified in BTB converter prototype.
- 23 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 1, 250-259
Open AccessA General Pulse Width Modulation Method for Zero-Voltage-Switching Active-clamping Three-phase Power Converters: Edge Aligned Pulse Width Modulation (EA-PWM)
A general PWM method for soft-switching three-phase power converters—Edge Aligned PWM (EA-PWM) is proposed. It aligns all the high loss commutation instants of the converter bridges in a switching cycle at the same instant so that all the switches of the three-phase converter can realize zero-voltage-switching (ZVS) with the help of the resonant auxiliary circuit which operates once each switching cycle. EA-PWM scheme for ZVS active-clamping three-phase converter is introduced. ZVS condition and voltage stress of the converters is derived. EA-PWM can adapt to various modulation methods such as SPWM, Harmonic Injected SPWM, Continuous Pulse Width Modulation (CPWM), Discontinuous Pulse Width Modulation (DPWM), etc. The ZVS condition of three-phase CAC converter are discussed. Finally, EA-PWM scheme is verified in BTB converter prototype.
- 19 February 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 7 (2) , 722-735
Zero-Voltage-Switching SiC-MOSFET Three-Phase Four-Wire Back-to-Back Converter
- 19 February 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 7 (2) , 722-735
Zero-Voltage-Switching SiC-MOSFET Three-Phase Four-Wire Back-to-Back Converter
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3 (21506078) , 1742-1749
Topology of super uninterruptible power supply with multiple energy sources
The dramatic loss caused by the power blackout in some industrial applications proposes the requirement for an extremely high reliability uninterruptible power supply (UPS). This paper introduces the concept of super uninterruptible power supply (Super UPS). Multiple energy sources are used to obtain a high reliability, long backup time, high surety UPS system. Classifications for energy sources, power conversion stage and power distribution bus line are established to simplify the power conversion architectures. A generic method to classify the architectures for multiple energy source system is presented. Then a system reliability evaluation method based on different architectures is used to analyze the characteristics of different types of topology. Redundant power conversion stage design to enhance the system reliability is discussed. Finally, a high reliability super UPS architecture is proposed.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3 (21506078) , 1742-1749
Topology of super uninterruptible power supply with multiple energy sources
The dramatic loss caused by the power blackout in some industrial applications proposes the requirement for an extremely high reliability uninterruptible power supply (UPS). This paper introduces the concept of super uninterruptible power supply (Super UPS). Multiple energy sources are used to obtain a high reliability, long backup time, high surety UPS system. Classifications for energy sources, power conversion stage and power distribution bus line are established to simplify the power conversion architectures. A generic method to classify the architectures for multiple energy source system is presented. Then a system reliability evaluation method based on different architectures is used to analyze the characteristics of different types of topology. Redundant power conversion stage design to enhance the system reliability is discussed. Finally, a high reliability super UPS architecture is proposed.