A. D. Chicherina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
A. D. Chicherina has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Alexander I. Reshmin
Moscow State University, Institute of Mechanics, Moscow, Russia
3 shared publications - V. G. Lushchik
Moscow State University, Institute of Mechanics, Moscow, Russia
2 shared publications - Alexander V. Aksenov
Lomonosov Moscow State University
1 shared publication I S Chicherin
Lomonosov Moscow State University, Moscow, Russia
1 shared publication- V. G. Lushchik
Research Institute of Mechanics, Lomonosov Moscow State University, Moscow, Russia
1 shared publication
Latest Publications
- 1 June 2026
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 61 (3) , 58
Reynolds Analogy Factor in the Compressible Turbulent Boundary Layer on a Cooled Wall
The compressible turbulent boundary layer in supersonic flow on a cooled wall is numerically studied using the three-parameter differential RANS turbulence model. The study is carried out for a number of the Mach numbers (from 2 to 8) and a number of the temperature factors (from 0.2 to 0.8). The dependences of the Reynolds analogy coefficient on the Mach number and the temperature factor are found using the results of calculations of the flow and heat transfer characteristics.
- 1 June 2026
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 61 (3) , 58
Reynolds Analogy Factor in the Compressible Turbulent Boundary Layer on a Cooled Wall
The compressible turbulent boundary layer in supersonic flow on a cooled wall is numerically studied using the three-parameter differential RANS turbulence model. The study is carried out for a number of the Mach numbers (from 2 to 8) and a number of the temperature factors (from 0.2 to 0.8). The dependences of the Reynolds analogy coefficient on the Mach number and the temperature factor are found using the results of calculations of the flow and heat transfer characteristics.
- 1 December 2025
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 60 (7) , 148
Comparative Analysis of Heat-Transfer Efficiency in Round and Flat Continuous Diffusers
Numerical simulation of flow and heat transfer in round and flat continuous diffusers with a smooth surface is performed using a three-parameter differential RANS turbulence model supplemented by a transfer equation for the turbulent heat flux. A comparative analysis of local and integral characteristics of the flow and heat transfer shows that, at the same opening angle, the Nusselt number in a round diffuser is higher than in a flat diffuser, and this excess increases with increasing opening angle. However, the Reynolds analogy factor for a round diffuser is slightly higher than for a flat diffuser due to the higher value of the friction coefficient in a round diffuser. It is shown that, with an increasing Reynolds number, the Reynolds analogy factor, both current and averaged over the diffuser length, slightly decreases. The Nusselt number averaged over the length also decreases, while the averaged friction coefficient remains practically constant.
- 1 December 2025
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 60 (7) , 148
Comparative Analysis of Heat-Transfer Efficiency in Round and Flat Continuous Diffusers
Numerical simulation of flow and heat transfer in round and flat continuous diffusers with a smooth surface is performed using a three-parameter differential RANS turbulence model supplemented by a transfer equation for the turbulent heat flux. A comparative analysis of local and integral characteristics of the flow and heat transfer shows that, at the same opening angle, the Nusselt number in a round diffuser is higher than in a flat diffuser, and this excess increases with increasing opening angle. However, the Reynolds analogy factor for a round diffuser is slightly higher than for a flat diffuser due to the higher value of the friction coefficient in a round diffuser. It is shown that, with an increasing Reynolds number, the Reynolds analogy factor, both current and averaged over the diffuser length, slightly decreases. The Nusselt number averaged over the length also decreases, while the averaged friction coefficient remains practically constant.
- 1 December 2025
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 60 (7) , 149
Study of Turbulent Flow Characteristics in Plate Heat Exchangers with Diffuser Channels
Numerical simulation of the flow and heat transfer in a unit of a counter-flow heat exchanger is carried out using a three-parameter differential RANS turbulence model supplemented by a transfer equation for a turbulent heat flow. The adjacent channels of the unit are flat, continuous diffusers with a smooth surface. The physical properties and thickness of the wall between the channels are taken into account. The analysis of the influence of the opening angle of the diffusers on the local and integral characteristics of the flow of hot and cold fluids, as well as heat exchange, shows that the intensity of turbulence and shear stress increase with an increase in the angle of inclination of the heat-transfer wall of the diffuser channel.
- 1 December 2025
- Published by Pleiades Publishing Ltd in Fluid Dynamics
- Vol. 60 (7) , 149
Study of Turbulent Flow Characteristics in Plate Heat Exchangers with Diffuser Channels
Numerical simulation of the flow and heat transfer in a unit of a counter-flow heat exchanger is carried out using a three-parameter differential RANS turbulence model supplemented by a transfer equation for a turbulent heat flow. The adjacent channels of the unit are flat, continuous diffusers with a smooth surface. The physical properties and thickness of the wall between the channels are taken into account. The analysis of the influence of the opening angle of the diffusers on the local and integral characteristics of the flow of hot and cold fluids, as well as heat exchange, shows that the intensity of turbulence and shear stress increase with an increase in the angle of inclination of the heat-transfer wall of the diffuser channel.
- Open Access
- 1 April 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1205 (1) , 012003
Self-similar solution for power-law liquid flow down an inclined plane
Within the Stokes film approximation, unsteady plane-parallel spreading of a thin layer of a heavy non-Newtonian fluid along an inclined solid surface is studied. The forced spreading regime induced by mass supply is considered. An evolution equation for the film thickness is derived. The group classification problem is solved. Self-similar solution is constructed for the power time dependence on mass supply.
- 1 April 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1205 (1) , 012003
Open AccessSelf-similar solution for power-law liquid flow down an inclined plane
Within the Stokes film approximation, unsteady plane-parallel spreading of a thin layer of a heavy non-Newtonian fluid along an inclined solid surface is studied. The forced spreading regime induced by mass supply is considered. An evolution equation for the film thickness is derived. The group classification problem is solved. Self-similar solution is constructed for the power time dependence on mass supply.