Victor Miranda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Victor Miranda has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Andrew Lowe
Auckland University of Technology
2 shared publications - Tanvi Chandel
Institute of Biomedical Technologies, Auckland University of Technology, Auckland 1010, New Zealand
2 shared publications - Tet Chuan Lee
Institute of Biomedical Technologies, Auckland University of Technology, Auckland 1010, New Zealand
2 shared publications - Hammed Olawale Fatoyinbo
Department of Mathematical Sciences, Auckland University of Technology, Auckland 1010, New Zealand
1 shared publication - Mahsa Mohaghegh
Auckland University of Technology
1 shared publication - Parul Tiwari
Department of Mathematical Sciences, Auckland University of Technology, 55 Wellesley Street East, Auckland 1010, New Zealand
1 shared publication
Latest Publications
- Open Access
- 23 January 2026
- Published by SAGE Publications in Nutrition and Health
- Vol. 32 (6) , 2183-2192
Personalising nutrition and lifestyle recommendations: Analysis of gene-test reports by individual and geographic differences
Introduction: Advances in nutrigenomics have enabled exploration of how genetic variation may relate to nutrition and lifestyle traits. However, the extent to which demographic factors influence the distribution of such variants remains underexplored. Objective: This study examined gender- and region-specific variation in diet- and lifestyle-related genetic traits and described patterns of trait clustering within a cohort of direct-to-consumer gene-test clients. Methods: A cross-sectional analysis was conducted on 503 anonymised gene-test reports covering 41 nutrition- and lifestyle-linked genetic components. Chi-square tests assessed demographic differences in allele frequency distributions. Hierarchical clustering and principal component analysis were applied as exploratory tools to visualise trait patterns. Results: Most individuals exhibited typical genotype distributions, though some demographic differences were observed. Statistically significant gender variation was noted in omega-3/6 metabolism (p = 0.0378). Lactose intolerance showed the greatest regional disparity, disproportionately affecting Asian (p < 0.00001). Marked regional differences were also observed in vitamin-D status (p = 0.0137), omega-3 metabolism (p = 0.0215), pain tolerance (p = 0.0279), fat utilisation (p = 0.0406) and gluten sensitivity (p = 0.0411). Clustering grouped 41 components into 14 sets. Three principal clusters explained 44–80% of the variance. Predictive modelling was limited by incomplete data and class imbalance. Conclusion: This exploratory study highlights modest demographic differences in allele frequencies and demonstrates clustering of nutrition-related genetic traits within a direct-to-consumer dataset. Findings should be interpreted as descriptive signals rather than prescriptive guidance. Future research incorporating phenotypic, biomarker, and outcome data is needed to evaluate functional and clinical significance.
- 23 January 2026
- Published by SAGE Publications in Nutrition and Health
- Vol. 32 (6) , 2183-2192
Open AccessPersonalising nutrition and lifestyle recommendations: Analysis of gene-test reports by individual and geographic differences
Introduction: Advances in nutrigenomics have enabled exploration of how genetic variation may relate to nutrition and lifestyle traits. However, the extent to which demographic factors influence the distribution of such variants remains underexplored. Objective: This study examined gender- and region-specific variation in diet- and lifestyle-related genetic traits and described patterns of trait clustering within a cohort of direct-to-consumer gene-test clients. Methods: A cross-sectional analysis was conducted on 503 anonymised gene-test reports covering 41 nutrition- and lifestyle-linked genetic components. Chi-square tests assessed demographic differences in allele frequency distributions. Hierarchical clustering and principal component analysis were applied as exploratory tools to visualise trait patterns. Results: Most individuals exhibited typical genotype distributions, though some demographic differences were observed. Statistically significant gender variation was noted in omega-3/6 metabolism (p = 0.0378). Lactose intolerance showed the greatest regional disparity, disproportionately affecting Asian (p < 0.00001). Marked regional differences were also observed in vitamin-D status (p = 0.0137), omega-3 metabolism (p = 0.0215), pain tolerance (p = 0.0279), fat utilisation (p = 0.0406) and gluten sensitivity (p = 0.0411). Clustering grouped 41 components into 14 sets. Three principal clusters explained 44–80% of the variance. Predictive modelling was limited by incomplete data and class imbalance. Conclusion: This exploratory study highlights modest demographic differences in allele frequencies and demonstrates clustering of nutrition-related genetic traits within a direct-to-consumer dataset. Findings should be interpreted as descriptive signals rather than prescriptive guidance. Future research incorporating phenotypic, biomarker, and outcome data is needed to evaluate functional and clinical significance.
- Open Access
Lung Cancer Survival Prediction Using Machine Learning and Statistical Methods
Lung cancer remains one of the leading causes of cancer-related mortality, yet most survival models rely only on baseline factors and overlook posttreatment variables that reflect disease progression. To address this gap, we applied Cox Proportional Hazards and Random Survival Forests, integrating baseline features with post-treatment predictors such as progression-free interval (PFI.time) and residual tumor status. The Cox model achieved a concordance index (C-index) of 0.90, while the RSF model reached 0.86, both outperforming previous studies. Beyond statistical gains, the integration of post-treatment variables provides oncologists with more clinically meaningful and reliable survival estimates. This enables improved treatment planning, more personalized patient counseling, and better-informed follow-up strategies. From a practical standpoint, these results demonstrate how routinely collected clinical variables can be transformed into actionable survival predictions.
Open AccessLung Cancer Survival Prediction Using Machine Learning and Statistical Methods
Lung cancer remains one of the leading causes of cancer-related mortality, yet most survival models rely only on baseline factors and overlook posttreatment variables that reflect disease progression. To address this gap, we applied Cox Proportional Hazards and Random Survival Forests, integrating baseline features with post-treatment predictors such as progression-free interval (PFI.time) and residual tumor status. The Cox model achieved a concordance index (C-index) of 0.90, while the RSF model reached 0.86, both outperforming previous studies. Beyond statistical gains, the integration of post-treatment variables provides oncologists with more clinically meaningful and reliable survival estimates. This enables improved treatment planning, more personalized patient counseling, and better-informed follow-up strategies. From a practical standpoint, these results demonstrate how routinely collected clinical variables can be transformed into actionable survival predictions.
- Open Access
- 5 August 2025
- Published by Elsevier in Comparative Immunology, Microbiology and Infectious Diseases
- Vol. 123, 102387
Multivariable analysis of highly pathogenic H5N1 and H5Nx avian influenza in wild birds and poultry in Asian subregions
- 5 August 2025
- Published by Elsevier in Comparative Immunology, Microbiology and Infectious Diseases
- Vol. 123, 102387
Open AccessMultivariable analysis of highly pathogenic H5N1 and H5Nx avian influenza in wild birds and poultry in Asian subregions
- Open Access
- 14 November 2024
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 13 (22) , 6846
Zero End-Digit Preference in Blood Pressure and Implications for Cardiovascular Disease Risk Prediction—A Study in New Zealand
Background/Objectives: Blood pressure (BP) readings are often rounded to the nearest zero end-digit. Guidelines permit rounding to the closest 2 mmHg. This paper investigated the effect of rounding systolic blood pressure (SBP) values on the prediction of cardiovascular disease (CVD) risk among the New Zealand population. A total of 427,299 individuals received opportunistic cardiovascular disease risk assessments at primary care facilities in New Zealand. Method: A total of 292,122 SBP readings possessed a non-zero terminal digit. These were rounded to the nearest zero end-digit. A survival model estimating a 5-year CVD risk was applied to both datasets, i.e., with and without rounding. Hazard ratios and misclassification rates were analysed to emphasise the notable differences. Financial impact was assessed by examining healthcare expenditures. Results: In total, 32% of SBP values exhibited a terminal digit of zero, and 2.85% and 4.24% of men were misclassified as moderate and high risk, respectively, while approximately 3.21% of women were misclassified into the same risk categories. Likewise, 1.19% and 0.47% of men, as well as 0.62% and 0.20% of women, were misclassified into the low and moderate risk categories, respectively. Conclusions: Precisely measuring SBP is crucial in accurately assessing CVD risk and managing healthcare resources effectively.
- 14 November 2024
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 13 (22) , 6846
Open AccessZero End-Digit Preference in Blood Pressure and Implications for Cardiovascular Disease Risk Prediction—A Study in New Zealand
Background/Objectives: Blood pressure (BP) readings are often rounded to the nearest zero end-digit. Guidelines permit rounding to the closest 2 mmHg. This paper investigated the effect of rounding systolic blood pressure (SBP) values on the prediction of cardiovascular disease (CVD) risk among the New Zealand population. A total of 427,299 individuals received opportunistic cardiovascular disease risk assessments at primary care facilities in New Zealand. Method: A total of 292,122 SBP readings possessed a non-zero terminal digit. These were rounded to the nearest zero end-digit. A survival model estimating a 5-year CVD risk was applied to both datasets, i.e., with and without rounding. Hazard ratios and misclassification rates were analysed to emphasise the notable differences. Financial impact was assessed by examining healthcare expenditures. Results: In total, 32% of SBP values exhibited a terminal digit of zero, and 2.85% and 4.24% of men were misclassified as moderate and high risk, respectively, while approximately 3.21% of women were misclassified into the same risk categories. Likewise, 1.19% and 0.47% of men, as well as 0.62% and 0.20% of women, were misclassified into the low and moderate risk categories, respectively. Conclusions: Precisely measuring SBP is crucial in accurately assessing CVD risk and managing healthcare resources effectively.
- Open Access
- 25 March 2024
- Published by MDPI AG in Technologies
- Vol. 12 (4) , 44
Blood Pressure Measurement Device Accuracy Evaluation: Statistical Considerations with an Implementation in R
Inaccuracies from devices for non-invasive blood pressure measurements have been well reported with clinical consequences. International standards, such as ISO 81060-2 and the seminal AAMI/ANSI SP10, define protocols and acceptance criteria for these devices. Prior to applying these standards, a sample size of N >= 85 is mandatory, that is, the number of distinct subcjects used to calculate device inaccuracies. Often, it is not possible to gather such a large sample. Many studies apply these standards with a smaller sample. The objective of the paper is to introduce a methodology that broadens the method first developed by the AAMI Sphygmomanometer Committee for accepting a blood pressure measurement device. We study changes in the acceptance region for various sample sizes using the sampling distribution for proportions and introduce a methodology for estimating the exact probability of the acceptance of a device. This enables the comparison of the accuracies of existing device development techniques even if they were studied with a smaller sample size. The study is useful in assisting BP measurement device manufacturers. To assist clinicians, we present a newly developed “bpAcc” package in R to evaluate acceptance statistics for various sample sizes.
- 25 March 2024
- Published by MDPI AG in Technologies
- Vol. 12 (4) , 44
Open AccessBlood Pressure Measurement Device Accuracy Evaluation: Statistical Considerations with an Implementation in R
Inaccuracies from devices for non-invasive blood pressure measurements have been well reported with clinical consequences. International standards, such as ISO 81060-2 and the seminal AAMI/ANSI SP10, define protocols and acceptance criteria for these devices. Prior to applying these standards, a sample size of N >= 85 is mandatory, that is, the number of distinct subcjects used to calculate device inaccuracies. Often, it is not possible to gather such a large sample. Many studies apply these standards with a smaller sample. The objective of the paper is to introduce a methodology that broadens the method first developed by the AAMI Sphygmomanometer Committee for accepting a blood pressure measurement device. We study changes in the acceptance region for various sample sizes using the sampling distribution for proportions and introduce a methodology for estimating the exact probability of the acceptance of a device. This enables the comparison of the accuracies of existing device development techniques even if they were studied with a smaller sample size. The study is useful in assisting BP measurement device manufacturers. To assist clinicians, we present a newly developed “bpAcc” package in R to evaluate acceptance statistics for various sample sizes.
- Open Access
- 15 September 2022
- Published by Springer Nature in Computational Statistics
- Vol. 38 (3) , 1463-1485
Two-parameter link functions, with applications to negative binomial, Weibull and quantile regression
One-parameter link functions play a fundamental role in regression via generalized linear modelling. This paper develops the general theory fortwo-parameter links in the very large class of vector generalized linear models by using total derivatives applied to a composite log-likelihood within the Fisher scoring/iteratively reweighted least squares algorithm. We solve a four-decade old problem with an interesting history as our first example: the canonical link for negative binomial regression. The remaining examples are fitting Weibull regression using both the mean and quantile directly compared to GAMLSS, and performing quantile regression based on the Gaussian distribution. Numerical examples based on real and simulated data are given. The methods described here are implemented by the and packages, available on CRAN. Supplementary materials for this article are available online.
- 15 September 2022
- Published by Springer Nature in Computational Statistics
- Vol. 38 (3) , 1463-1485
Open AccessTwo-parameter link functions, with applications to negative binomial, Weibull and quantile regression
One-parameter link functions play a fundamental role in regression via generalized linear modelling. This paper develops the general theory fortwo-parameter links in the very large class of vector generalized linear models by using total derivatives applied to a composite log-likelihood within the Fisher scoring/iteratively reweighted least squares algorithm. We solve a four-decade old problem with an interesting history as our first example: the canonical link for negative binomial regression. The remaining examples are fitting Weibull regression using both the mean and quantile directly compared to GAMLSS, and performing quantile regression based on the Gaussian distribution. Numerical examples based on real and simulated data are given. The methods described here are implemented by the and packages, available on CRAN. Supplementary materials for this article are available online.
- Open Access
- 7 May 2019
- Published by Wiley in Journal of Probability and Statistics
- Vol. 2019, 1-11
New Link Functions for Distribution–Specific Quantile Regression Based on Vector Generalized Linear and Additive Models
In the usual quantile regression setting, the distribution of the response given the explanatory variables is unspecified. In this work, the distribution is specified and we introduce new link functions to directly model specified quantiles of seven 1–parameter continuous distributions. Using the vector generalized linear and additive model (VGLM/VGAM) framework, we transform certain prespecified quantiles to become linear or additive predictors. Our parametric quantile regression approach adopts VGLMs/VGAMs because they can handle multiple linear predictors and encompass many distributions beyond the exponential family. Coupled with the ability to fit smoothers, the underlying strong assumption of the distribution can be relaxed so as to offer a semiparametric–type analysis. By allowing multiple linear and additive predictors simultaneously, the quantile crossing problem can be avoided by enforcing parallelism constraint matrices. This article gives details of a software implementation called the VGAMextra package for R. Both the data and recently developed software used in this paper are freely downloadable from the internet.
- 7 May 2019
- Published by Wiley in Journal of Probability and Statistics
- Vol. 2019, 1-11
Open AccessNew Link Functions for Distribution–Specific Quantile Regression Based on Vector Generalized Linear and Additive Models
In the usual quantile regression setting, the distribution of the response given the explanatory variables is unspecified. In this work, the distribution is specified and we introduce new link functions to directly model specified quantiles of seven 1–parameter continuous distributions. Using the vector generalized linear and additive model (VGLM/VGAM) framework, we transform certain prespecified quantiles to become linear or additive predictors. Our parametric quantile regression approach adopts VGLMs/VGAMs because they can handle multiple linear predictors and encompass many distributions beyond the exponential family. Coupled with the ability to fit smoothers, the underlying strong assumption of the distribution can be relaxed so as to offer a semiparametric–type analysis. By allowing multiple linear and additive predictors simultaneously, the quantile crossing problem can be avoided by enforcing parallelism constraint matrices. This article gives details of a software implementation called the VGAMextra package for R. Both the data and recently developed software used in this paper are freely downloadable from the internet.