YSYiguo Su

Yiguo Su

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yiguo Su has a total of 113 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Montmorillonite-Regulated C3N4/Co3O4 Interface Enables Sustained Radical-Driven Photocatalytic Peroxymonosulfate Oxidation of Bisphenol A

    by Min Li, Xudong Liu, Zhinan Xie, Chunfang Du, Yiguo Su

    Interfacial regulation provides a route to couple charge separation, Co-site chemistry, and peroxymonosulfate (PMS) activation in photocatalytic oxidation. Here, a montmorillonite-regulated C3N4/Co3O4 photocatalyst (MCNCo) was constructed for light-assisted BPA degradation. MCNCo achieved 85.2% BPA removal within 60 min, compared with 70.2% for CNCo, despite its lower specific surface area and substantially lower bulk Co content. KPFM revealed a 0.404 eV work-function difference between C3N4 and Co3O4, while SPV, photocurrent, PL, and EIS measurements consistently showed enhanced photoinduced charge separation after MMT incorporation. Component-control experiments identified Co-containing sites as the primary direct PMS activation centers, with C3N4 supplying photogenerated carriers and MMT regulating the defect-rich interfacial environment and Co-site stability. MCNCo/PMS/Vis followed a photogenerated-charge-assisted radical pathway in which •OH and SO4•–contributed 47.76 and 22.67%, respectively, whereas 1O2 contributed 0.05%. Although MCNCo and CNCo reached the same final PMS decomposition efficiency (80.36%), MCNCo showed the higher PMS utilization index (0.139 versus 0.115), consistent with its sustained BPA oxidation. MCNCo also maintained catalytic activity over ten cycles, and TOC removal increased to 72.63% at 300 min. These results establish layered MMT as an interfacial regulator that couples defect control, charge transfer, and Co-mediated PMS activation.

  • Open Access

    Interfacial Electric Field-Driven Proton Pumping In a Dual S-Scheme g-C3N4/ZnCo2S4/CoWO4 Heterojunction for Concurrent H2 Evolution and Pollutant Mineralization

    by Zhenglong Shen, Meiting Song, Yiguo Su, Yahui Zhang, Kang Zhang, Xiaoyu Chai, Yuhang Wu

    The escalating energy crisis and persistent antibiotic pollution pose interconnected global challenges, necessitating innovative solutions for simultaneous clean energy generation and environmental remediation. Herein, a novel ternary g-C3N4/ZnCo2S4/CoWO4 dual S-scheme heterojunction was successfully fabricated via a facile solid-state grinding-calcination method and is designed to achieve synergistic photocatalytic H2 evolution and oxytetracycline (OTC) degradation. Taking advantages of structure regulation, the designed hierarchical ZnCo2S4 can act as an electron reduction center which is well integrated on g-C3N4 nanosheets and CoWO4 nanoparticles to construct a stepwise pathway of charge transfer. The rationally designed g-C3N4/ZnCo2S4/CoWO4-20 exhibits an exceptional photodehydrogenation performance reaching 9.09 mmol·g-1·h-1 in pure water under light irradiation, and outstanding stability over 25 h of cycling tests. More importantly, the hybrid shows a remarkable electrolyte resistance and anti-poisoning capability with an extraordinary stable generation rate of hydrogen generation (7.88 mmol·g-1·h-1) in pure simulated seawater (3.5 wt% NaCl). For the oxytetracycline OTC removal, the catalyst is able to degrade OTC with an ultrahigh rate (98.2%) in 15 min by combination with peroxymonosulfate (PMS) activation through the interfacial fast electron transfer. More strikingly, in reaction systems without PMS addition, the bifunctional photocatalyst secures a persistent 95.4% continuous OTC destruction coupled with a cumulative H2 production yield of 36.4 mmol·g-1 over a 7 h symbiotic reaction framework. Characterizations including in-situ irradiated X-ray photoelectron spectroscopy and surface work function analysis confirm that this extraordinary catalytic flexibility and resistance to saline conditions originate from the rationally constructed heterojunction structure, the extended solar light absorption and the surface hydroxylation under photoirradiation, favorably cooperating to enhance the efficiency of charge separation of the dual S-scheme. Essentially, photogenerated surface hydroxylation serves as a proton pump effecting an enhancement of the proton reduction reaction and simultaneously production of reactive oxygen species for the degradation of pollutants. This study offers key information for designing and creating saline tolerant, dual functionalities for a variety of photocatalyst applications for sustainable solar energy conversion and water pollution remediation direct from real natural saline water.

  • Open Access

    Strategic Anchoring of Pt Mediators in Z-Scheme g-C3N4/Pt/ZnCo2S4 Heterojunctions for High-Flux Photocatalytic H2 Evolution and Dynamic Dual-functional Wastewater Purification

    by Zhenglong Shen, Meiting Song, Yiguo Su, Yahui Zhang, Kang Zhang, Xiaoyu Chai, Yuhang Wu

    Coupling solar-driven water splitting technologies for sustainable hydrogen manufacturing with organic pollutant remediation represents a sustainable and compelling paradigm for solar energy conversion. Herein, an all-solid-state Z-scheme g-C3N4/Pt/ZnCo2S4 heterojunction was successfully fabricated via a combined hydrothermal and in-situ photodeposition strategy, with Pt nanoparticles serving as electronic bridges to precisely regulate interfacial charge transfer pathways. The optimized g-C3N4/Pt/ZnCo2S4-25 photocatalyst delivers a remarkable H2 evolution rate of 7.25 mmol·g-1·h-1, approximately 45 and 121 fold higher than pristine g-C3N4 and ZnCo2S4, respectively, while maintaining stable performance in simulated seawater (4.71 mmol·g-1·h-1). In a coupled energy-environmental symbiotic system without any strong oxidant, the catalyst simultaneously achieves a cumulative H2 yield of 4.58 mmol·g-1 and 86.6% oxytetracycline (OTC) degradation within 5 h. In parallel, with the assistance of PMS, a pinnacle individual degradation efficiency of 99% can be rapidly accomplished within just 20 min. Comprehensive in-situ irradiated XPS, EPR spectroscopy, UPS, and DFT calculations systematically elucidate the Pt-mediated Z-scheme charge transfer dynamics, revealing that the high work function of Pt enables it to function as an efficient electron sink, facilitating the directed migration of photo-excited electrons from g-C3N4 to undergo annihilation with holes residing in ZnCo2S4, thereby preserving the strong reducing electrons on ZnCo2S4 for proton reduction and the highly oxidizing holes on g-C3N4 for organic pollutant degradation. This work provides profound mechanistic insights into Pt-mediated interfacial energy barrier modulation and establishes a valuable design paradigm for bifunctional photocatalysts toward sustainable energy-environmental applications.

  • Open Access

    Rational Construction of Bi-modified Bi2MoO6/BiOBr S-Scheme Heterojunctions toward Efficient Simulated Sunlight Photocatalytic Formaldehyde Removal

    by Yuhang Wu, Xiaoyu Chai, Ying Liu, Zhenglong Shen, Yahui Zhang, Kang Zhang, Yiguo Su, Meiting Song

    Formaldehyde poses a serious threat to human health due to its high toxicity and volatility, necessitating efficient and stable photocatalytic degradation technologies. Herein, a photocatalyst Bi/Bi2MoO6/BiOBr was synthesized via a solvothermal method followed by in-situ reduction. Its phase composition, structure, and photoelectrochemical properties were systematically analyzed using multiple characterization techniques. The ternary composite integrates oxygen vacancies, metallic Bi nanoparticles, and S-scheme heterojunction. With a rate constant of 2.05 min-1·g-1, Bi/Bi2MoO6/BiOBr exhibited a remarkable HCHO degradation efficiency of 97.25% in 180 min simulated sunlight irradiation, surpassing pristine BiOBr, Bi2MoO6 and Bi2MoO6/BiOBr-4 by factors of 7.1, 29.3, and 2.3, respectively. The catalyst also demonstrated excellent cyclic stability (90.96% after 10 cycles), humidity resistance, and broad-spectrum activity toward other VOCs. The improved performance results from synergy between the S-scheme charge transfer pathway, the hot electron injection from the surface plasmon resonance of Bi nanoparticles, and an increased oxygen vacancy density that promotes reactant activation. Radical trapping experiments and electron spin resonance confirmed •OH and •O2- as the main active species. Furthermore, density functional theory calculations provided insights into the electron transfer mechanism and catalytic mechanism. This study demonstrates the potential of non-precious metal Bi as a viable alternative to enhance photocatalytic performance.

  • Activating Lattice Oxygen via Enhanced Ni–O Covalency for Robust Industrial-Level Seawater Electrolysis

    by Jiarong Mu, Zhanjin Wang, Peng Wang, Zhinan Xie, Jianfang Jing, Jinlu He, Yiguo Su

    Achieving efficient and stable seawater electrolysis remains a significant challenge. Herein, an FeMo-Ni(OH)2 catalyst is fabricated through hierarchical ion doping combined with electrochemical oxidation activation, enabling highly efficient and durable oxygen evolution reaction (OER) for alkaline seawater electrolysis at industrial-level current densities. Fe doping modifies the active centers, driving a mechanistic transition from the adsorbate evolution mechanism to the lattice oxygen oxidation mechanism. Concurrently, Mo doping enhances the Ni-O covalency by modulating the electron density around the Ni atoms, thereby boosting both the stability and intrinsic activity of the FeMo-Ni(OH)2 catalyst. Furthermore, the electrochemical activation process induces the formation of SO42-, which generates a protective layer on the anode surface that repels Cl-. This effectively suppresses competitive chloride oxidation reactions and mitigates anode corrosion, resulting in an OER selectivity of over 80%. Consequently, the FeMo-Ni(OH)2 catalyst achieves low overpotentials of 322 mV at 1000 mA cm-2 in alkaline seawater and 290 mV at 1000 mA cm-2 in 1 M KOH, alongside exceptional operational stability exceeding 1000 h, outperforming most reported OER catalysts. This work provides valuable insights into achieving a synergistic balance between the OER activity and stability for practical seawater electrolysis.

  • Open Access

    Interfacial built-in electric field-modulated charge migration behavior in Cu2MoS4/CdSe heterojunction for efficient photocatalytic hydrogen production

    by Jianlin Zhao, Mengyao Ren, Ze Wang, Xiaohui Ma, Dongmei Li, Li Songbo, Ping Bai, Yiguo Su

    The rational design of nanostructures and the comprehensive understanding of the structure-property relationships are crucial for directional charge migration. Herein, a prevalent strategy for regulating the built-in electric field (BIEF) at the interface is designed to synthesize the Cu2MoS4/CdSe heterostructure photocatalysts. The distinct work function of CdSe and Cu2MoS4 result in the formation of BIEF, which induces the flow of electrons at their interface from CdSe to Cu2MoS4. Notably, the optimal Cu2MoS4/CdSe demonstrates an outstanding evolution production rate of 5543.98 μmol·g-1·h-1 and remarkable stability, with a rate reduction of merely 10.74% after 5 continuous cycles. Both experimental and theoretical results indicated that the BIEF promotes the redistribution of interfacial charge, consequently promoting the separation of charge carrier and optimizing the adsorption of hydrogen intermediates, which conduced to the markedly enhanced photocatalytic evolution performance. This finding offers an achievable strategy for the precise tuning of charge transfer directions in high-performance CdSe-based photocatalysts.

  • Open Access

    Interfacial built-in electric field-modulated charge migration behavior in Cu2MoS4/CdSe heterojunction for efficient photocatalytic hydrogen production

    by Jianlin Zhao, Mengyao Ren, Ze Wang, Xiaohui Ma, Dongmei Li, Li Songbo, Ping Bai, Yiguo Su

    The rational design of nanostructures and the comprehensive understanding of the structure-property relationships are crucial for directional charge migration. Herein, a prevalent strategy for regulating the built-in electric field (BIEF) at the interface is designed to synthesize the Cu2MoS4/CdSe heterostructure photocatalysts. The distinct work function of CdSe and Cu2MoS4 result in the formation of BIEF, which induces the flow of electrons at their interface from CdSe to Cu2MoS4. Notably, the optimal Cu2MoS4/CdSe demonstrates an outstanding evolution production rate of 5543.98 μmol·g-1·h-1 and remarkable stability, with a rate reduction of merely 10.74% after 5 continuous cycles. Both experimental and theoretical results indicated that the BIEF promotes the redistribution of interfacial charge, consequently promoting the separation of charge carrier and optimizing the adsorption of hydrogen intermediates, which conduced to the markedly enhanced photocatalytic evolution performance. This finding offers an achievable strategy for the precise tuning of charge transfer directions in high-performance CdSe-based photocatalysts.