HSHyeong Min Son

Hyeong Min Son

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hyeong Min Son has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Utilization of Bio-Mineral Carbonation for Enhancing CO2 Sequestration and Mechanical Properties in Cementitious Materials

    by Hayeon Kim, Hyeongmin Son

    Microorganisms can perform mineral carbonation in various metabolic pathways, and this process can be utilized in the field of construction materials. The present study investigated the role of bio-mediated mineral carbonation in carbon sequestration performance and mechanical properties of cementitious materials. Bacterial-mediated ureolysis and CO2 hydration metabolism were selected as the main mechanisms for the mineral carbonation, and a microorganism, generating both urease and carbonic anhydrase, was incorporated into cementitious materials in the form of a bacterial culture solution. Four paste specimens were cured in water or carbonation conditions for 28 days, and a compressive strength test and a mercury intrusion porosimetry analysis were performed to investigate the changes in mechanical properties and microstructures. The obtained results showed that the pore size of the specimens incorporating bacteria was reduced by the precipitation of CaCO3 through the mineral carbonation process, thereby improving the mechanical properties of the paste specimens, regardless of the curing conditions. In addition, in the case of the paste specimens cured in carbonation conditions, more amorphous CaCO3 was observed and a larger amount of CaCO3 in the specimens incorporating the bacteria was measured than in the specimens without bacteria. This is attributed to promotion of the inflow and diffusion of CO2 via mineral carbonation through bacterial CO2 hydration metabolism.


  • Open Access

    Effects of Air Entrainment on Bacterial Viability in Cement Paste

    by Hayeon Kim, H. M. Son

    This study investigated the effect of air entrainment (AE) on bacterial viability in cementitious materials. Specimens were fabricated with Portland cement, urea, calcium lactate, and ureolytic bacteria, and with varying amounts of an AE agent. Specimens with different amounts of the AE agent were fabricated, and then a compressive strength test, quantitative polymerase chain reaction, X-ray diffraction, and thermogravimetry were used to investigate the mechanical properties, viability of bacteria, and hydrates of the specimens. The highest compressive strength was achieved by the specimen with 0.3% AE agent, while the compressive strength of the specimens decreased considerably when the incorporated AE agent was over 0.6%, due to increased porosity. The quantitative polymerase chain reaction result showed that the cell number of the viable bacteria was increased by incorporation of the AE agent, which also corresponded with an increase in CaCO3 due to microbial mineral formation. The obtained result confirmed the positive effect of AE agent incorporation in cementitious materials containing bacterial admixtures, as the viability of bacteria, which play a vital role in self-healing efficiency of concrete, was increased by the space provided by the AE agent in the cement matrix. In addition, the quantity of CaCO3 and the compressive strength were highest when 0.3% AE agent was incorporated.


  • Open Access

    A Study on Mechanical Characteristics of Cement Composites Fabricated with Nano-Silica and Carbon Nanotube

    by Ali Raza, Manan Bhandari, Hyeong-Ki Kim, Hyeong-Min Son, Baofeng Huang, Il-Woo Nam

    In this study, cement composites were fabricated with various contents of added nano-silica (NS) and multi-walled carbon nanotubes (MWNTs). The compressive and flexural strengths of the resultant cement composites were examined. To explore the microstructures and MWNT distribution, electrical conductivity tests, and scanning electron microscopy were conducted. In addition, the strength results were analyzed based on thermal analysis and porosity evaluations. The electrical conductivity results indicated that MWNTs were satisfactorily distributed in the cement composites. In the mechanical strength tests, the composite with a 0.6% MWNT and 5% NS content and another with a 0.3% MWNT and 5% NS content yielded enhancements in the compressive and flexural strengths of 17.2% and 52% compared with the control samples, respectively. However, composites containing relatively large amounts of both NS and MWNTs showed degradation in the mechanical strength. The enhancement or degradation of the strength was supported by porosity evaluations and thermal analysis results. In particular, the degradation of the strength due to the incorporation of large amounts of both MWNTs and NS was explained by thermogravimetric analysis, which indicated a limited generation of calcium silicate hydrate (C-S-H) hydration products. The lower generation of C-S-H was likely due to the dense microstructure of MWNT/NS-incorporated cement hindering the reactions between calcium hydroxide and the NS.


  • Open Access

    Impact of Bio-Carrier Immobilized with Marine Bacteria on Self-Healing Performance of Cement-Based Materials

    by Hayeon Kim, Hyeongmin Son, Joonho Seo, H. K. Lee

    The present study evaluated the self-healing efficiency and mechanical properties of mortar specimens incorporating a bio-carrier as a self-healing agent. The bio-carrier was produced by immobilizing ureolytic bacteria isolated from seawater in bottom ash, followed by surface coating with cement powder to prevent loss of nutrients during the mixing process. Five types of specimens were prepared with two methods of incorporating bacteria, and were water cured for 28 days. To investigate the healing ratio, the specimens with predefined cracks were treated by applying a wet–dry cycle in three different conditions, i.e., seawater, tap water, and air for 28 days. In addition, a compression test and a mercury intrusion porosimetry analysis of the specimens were performed to evaluate their physico-mechanical properties. The obtained results showed that the specimen incorporating the bio-carrier had higher compressive strength than the specimen incorporating vegetative cells. Furthermore, the highest healing ratio was observed in specimens incorporating the bio-carrier. This phenomenon could be ascribed by the enhanced bacterial viability by the bio-carrier.


  • Open Access

    Effect of CaSO4 Incorporation on Pore Structure and Drying Shrinkage of Alkali-Activated Binders

    by Hyeongmin Son, Sol Moi Park, Joon Ho Seo, Haeng Ki Lee

    This present study investigates the effects of CaSO4 incorporation on the pore structure and drying shrinkage of alkali-activated slag and fly ash. The slag and fly ash were activated at a 5:5 ratio by weighing with a sodium silicate. Thereafter, 0%, 5%, 10%, and 15% of CaSO4 were incorporated to investigate the changes in phase formation and internal pore structure. X-Ray Diffraction (XRD), thermogravimetry (TG)/derivative thermogravimetry (DTG), mercury intrusion porosimetry (MIP), nuclear magnetic resonance (NMR), and drying shrinkage tests were carried out to find the correlation between the pore structure and drying shrinkage of the specimens. The results showed that CaSO4 incorporation increased the formation of thenardite, and these phase changes affected the pore structure of the activated fly ash and slag. The increase in the CaSO4 content increased the pore distribution in the mesopore. As a result, the capillary tension and drying shrinkage decreased.


  • Open Access

    Pressure-Induced Geopolymerization in Alkali-Activated Fly Ash

    by Sol Moi Park, Hammad Raza Khalid, Joon Ho Seo, Hyun No Yoon, Hyeong Min Son, Seon Hyeok Kim, Nam Kon Lee, Haeng Ki Lee, Jeong Gook Jang

    The present study investigated geopolymerization in alkali-activated fly ash under elevated pressure conditions. The fly ash was activated using either sodium hydroxide or a combination of sodium silicate solution and sodium hydroxide, and was cured at 120 °C at a pressure of 0.22 MPa for the first 24 h. The pressure-induced evolution of the binder gel in the alkali-activated fly ash was investigated by employing synchrotron X-ray diffraction and solid-state 29Si and 27Al MAS NMR spectroscopy. The results showed that the reactivity of the raw fly ash and the growth of the zeolite crystals were significantly enhanced in the samples activated with sodium hydroxide. In contrast, the effects of the elevated pressure conditions were found to be less apparent in the samples activated with the sodium silicate solution. These results may have important implications for the binder design of geopolymers, since the crystallization of geopolymers relates highly to its long-term properties and functionality.


  • Open Access

    Ureolytic/Non-Ureolytic Bacteria Co-Cultured Self-Healing Agent for Cementitious Materials Crack Repair

    by Hyeong Min Son, Ha Yeon Kim, Sol Moi Park, Haeng Ki Lee

    The present study investigated the CaCO3 precipitation performance of ureolytic and non-ureolytic bacteria co-cultured as a self-healing agent for cementitious materials crack repair. Three different inoculum ratios of ureolytic Sporosarcina pasteurii and non-ureolytic Bacillus thuringiensis (10:0, 8:2, or 5:5) were used. The effect of coculturing ureolytic and non-ureolytic bacteria on microbial metabolism was investigated by measuring the rate of growth in urea-containing medium and the rate of NH4+ and CaCO3 production in urea–calcium lactate medium. The self-healing efficiency of co-cultured bacteria was examined by exposing cement mortar specimens with predefined cracks to media containing single urease-producing or co-cultured bacteria. The obtained results provide new findings, where CaCO3 precipitation is improved by co-culturing ureolytic and non-ureolytic bacteria, owing to the relatively faster growth rate of non-ureolytic bacteria. The crack filling rate correlated with the width of crack, in particular, specimens with a smaller crack width showed the faster filling effect, indicating that the crack width can be a dominant factor influencing the CaCO3 precipitation capacity of co-cultured bacteria.