Hayeon Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hayeon Kim has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Hyeong Min Son
Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Korea
4 shared publications - Haeng Ki Lee
Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology, Daejeon, South Korea
2 shared publications - Joonho Seo
Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
1 shared publication - Solmoi Park
Department of Global Smart City, Sungkyunkwan University, Suwon, Korea
1 shared publication
Latest Publications
- Open Access
Utilization of Bio-Mineral Carbonation for Enhancing CO2 Sequestration and Mechanical Properties in Cementitious Materials
Microorganisms can perform mineral carbonation in various metabolic pathways, and this process can be utilized in the field of construction materials. The present study investigated the role of bio-mediated mineral carbonation in carbon sequestration performance and mechanical properties of cementitious materials. Bacterial-mediated ureolysis and CO2 hydration metabolism were selected as the main mechanisms for the mineral carbonation, and a microorganism, generating both urease and carbonic anhydrase, was incorporated into cementitious materials in the form of a bacterial culture solution. Four paste specimens were cured in water or carbonation conditions for 28 days, and a compressive strength test and a mercury intrusion porosimetry analysis were performed to investigate the changes in mechanical properties and microstructures. The obtained results showed that the pore size of the specimens incorporating bacteria was reduced by the precipitation of CaCO3 through the mineral carbonation process, thereby improving the mechanical properties of the paste specimens, regardless of the curing conditions. In addition, in the case of the paste specimens cured in carbonation conditions, more amorphous CaCO3 was observed and a larger amount of CaCO3 in the specimens incorporating the bacteria was measured than in the specimens without bacteria. This is attributed to promotion of the inflow and diffusion of CO2 via mineral carbonation through bacterial CO2 hydration metabolism.
Open AccessUtilization of Bio-Mineral Carbonation for Enhancing CO2 Sequestration and Mechanical Properties in Cementitious Materials
Microorganisms can perform mineral carbonation in various metabolic pathways, and this process can be utilized in the field of construction materials. The present study investigated the role of bio-mediated mineral carbonation in carbon sequestration performance and mechanical properties of cementitious materials. Bacterial-mediated ureolysis and CO2 hydration metabolism were selected as the main mechanisms for the mineral carbonation, and a microorganism, generating both urease and carbonic anhydrase, was incorporated into cementitious materials in the form of a bacterial culture solution. Four paste specimens were cured in water or carbonation conditions for 28 days, and a compressive strength test and a mercury intrusion porosimetry analysis were performed to investigate the changes in mechanical properties and microstructures. The obtained results showed that the pore size of the specimens incorporating bacteria was reduced by the precipitation of CaCO3 through the mineral carbonation process, thereby improving the mechanical properties of the paste specimens, regardless of the curing conditions. In addition, in the case of the paste specimens cured in carbonation conditions, more amorphous CaCO3 was observed and a larger amount of CaCO3 in the specimens incorporating the bacteria was measured than in the specimens without bacteria. This is attributed to promotion of the inflow and diffusion of CO2 via mineral carbonation through bacterial CO2 hydration metabolism.
- Open Access
Effects of Air Entrainment on Bacterial Viability in Cement Paste
This study investigated the effect of air entrainment (AE) on bacterial viability in cementitious materials. Specimens were fabricated with Portland cement, urea, calcium lactate, and ureolytic bacteria, and with varying amounts of an AE agent. Specimens with different amounts of the AE agent were fabricated, and then a compressive strength test, quantitative polymerase chain reaction, X-ray diffraction, and thermogravimetry were used to investigate the mechanical properties, viability of bacteria, and hydrates of the specimens. The highest compressive strength was achieved by the specimen with 0.3% AE agent, while the compressive strength of the specimens decreased considerably when the incorporated AE agent was over 0.6%, due to increased porosity. The quantitative polymerase chain reaction result showed that the cell number of the viable bacteria was increased by incorporation of the AE agent, which also corresponded with an increase in CaCO3 due to microbial mineral formation. The obtained result confirmed the positive effect of AE agent incorporation in cementitious materials containing bacterial admixtures, as the viability of bacteria, which play a vital role in self-healing efficiency of concrete, was increased by the space provided by the AE agent in the cement matrix. In addition, the quantity of CaCO3 and the compressive strength were highest when 0.3% AE agent was incorporated.
Open AccessEffects of Air Entrainment on Bacterial Viability in Cement Paste
This study investigated the effect of air entrainment (AE) on bacterial viability in cementitious materials. Specimens were fabricated with Portland cement, urea, calcium lactate, and ureolytic bacteria, and with varying amounts of an AE agent. Specimens with different amounts of the AE agent were fabricated, and then a compressive strength test, quantitative polymerase chain reaction, X-ray diffraction, and thermogravimetry were used to investigate the mechanical properties, viability of bacteria, and hydrates of the specimens. The highest compressive strength was achieved by the specimen with 0.3% AE agent, while the compressive strength of the specimens decreased considerably when the incorporated AE agent was over 0.6%, due to increased porosity. The quantitative polymerase chain reaction result showed that the cell number of the viable bacteria was increased by incorporation of the AE agent, which also corresponded with an increase in CaCO3 due to microbial mineral formation. The obtained result confirmed the positive effect of AE agent incorporation in cementitious materials containing bacterial admixtures, as the viability of bacteria, which play a vital role in self-healing efficiency of concrete, was increased by the space provided by the AE agent in the cement matrix. In addition, the quantity of CaCO3 and the compressive strength were highest when 0.3% AE agent was incorporated.
- Open Access
Impact of Bio-Carrier Immobilized with Marine Bacteria on Self-Healing Performance of Cement-Based Materials
The present study evaluated the self-healing efficiency and mechanical properties of mortar specimens incorporating a bio-carrier as a self-healing agent. The bio-carrier was produced by immobilizing ureolytic bacteria isolated from seawater in bottom ash, followed by surface coating with cement powder to prevent loss of nutrients during the mixing process. Five types of specimens were prepared with two methods of incorporating bacteria, and were water cured for 28 days. To investigate the healing ratio, the specimens with predefined cracks were treated by applying a wet–dry cycle in three different conditions, i.e., seawater, tap water, and air for 28 days. In addition, a compression test and a mercury intrusion porosimetry analysis of the specimens were performed to evaluate their physico-mechanical properties. The obtained results showed that the specimen incorporating the bio-carrier had higher compressive strength than the specimen incorporating vegetative cells. Furthermore, the highest healing ratio was observed in specimens incorporating the bio-carrier. This phenomenon could be ascribed by the enhanced bacterial viability by the bio-carrier.
Open AccessImpact of Bio-Carrier Immobilized with Marine Bacteria on Self-Healing Performance of Cement-Based Materials
The present study evaluated the self-healing efficiency and mechanical properties of mortar specimens incorporating a bio-carrier as a self-healing agent. The bio-carrier was produced by immobilizing ureolytic bacteria isolated from seawater in bottom ash, followed by surface coating with cement powder to prevent loss of nutrients during the mixing process. Five types of specimens were prepared with two methods of incorporating bacteria, and were water cured for 28 days. To investigate the healing ratio, the specimens with predefined cracks were treated by applying a wet–dry cycle in three different conditions, i.e., seawater, tap water, and air for 28 days. In addition, a compression test and a mercury intrusion porosimetry analysis of the specimens were performed to evaluate their physico-mechanical properties. The obtained results showed that the specimen incorporating the bio-carrier had higher compressive strength than the specimen incorporating vegetative cells. Furthermore, the highest healing ratio was observed in specimens incorporating the bio-carrier. This phenomenon could be ascribed by the enhanced bacterial viability by the bio-carrier.
- Open Access
Ureolytic/Non-Ureolytic Bacteria Co-Cultured Self-Healing Agent for Cementitious Materials Crack Repair
The present study investigated the CaCO3 precipitation performance of ureolytic and non-ureolytic bacteria co-cultured as a self-healing agent for cementitious materials crack repair. Three different inoculum ratios of ureolytic Sporosarcina pasteurii and non-ureolytic Bacillus thuringiensis (10:0, 8:2, or 5:5) were used. The effect of coculturing ureolytic and non-ureolytic bacteria on microbial metabolism was investigated by measuring the rate of growth in urea-containing medium and the rate of NH4+ and CaCO3 production in urea–calcium lactate medium. The self-healing efficiency of co-cultured bacteria was examined by exposing cement mortar specimens with predefined cracks to media containing single urease-producing or co-cultured bacteria. The obtained results provide new findings, where CaCO3 precipitation is improved by co-culturing ureolytic and non-ureolytic bacteria, owing to the relatively faster growth rate of non-ureolytic bacteria. The crack filling rate correlated with the width of crack, in particular, specimens with a smaller crack width showed the faster filling effect, indicating that the crack width can be a dominant factor influencing the CaCO3 precipitation capacity of co-cultured bacteria.
Open AccessUreolytic/Non-Ureolytic Bacteria Co-Cultured Self-Healing Agent for Cementitious Materials Crack Repair
The present study investigated the CaCO3 precipitation performance of ureolytic and non-ureolytic bacteria co-cultured as a self-healing agent for cementitious materials crack repair. Three different inoculum ratios of ureolytic Sporosarcina pasteurii and non-ureolytic Bacillus thuringiensis (10:0, 8:2, or 5:5) were used. The effect of coculturing ureolytic and non-ureolytic bacteria on microbial metabolism was investigated by measuring the rate of growth in urea-containing medium and the rate of NH4+ and CaCO3 production in urea–calcium lactate medium. The self-healing efficiency of co-cultured bacteria was examined by exposing cement mortar specimens with predefined cracks to media containing single urease-producing or co-cultured bacteria. The obtained results provide new findings, where CaCO3 precipitation is improved by co-culturing ureolytic and non-ureolytic bacteria, owing to the relatively faster growth rate of non-ureolytic bacteria. The crack filling rate correlated with the width of crack, in particular, specimens with a smaller crack width showed the faster filling effect, indicating that the crack width can be a dominant factor influencing the CaCO3 precipitation capacity of co-cultured bacteria.