Craig Turchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Craig Turchi has a total of 149 co-authors. Here are the top co-authors by number of shared publications:
- Samuel H. Gage
National Renewable Energy Lab. (NREL), Golden, CO (United States)
4 shared publications - Mark Mehos
Center for Energy Conversion and Storage Systems
3 shared publications - Chad Augustine
National Laboratory of the Rockies, Golden, CO (United States)
2 shared publications Devon Kesseli
2 shared publicationsJoe Coventry
Australian National Univ., Canberra (Australia)
2 shared publicationsParthiv Kurup
National Renewable Energy Laboratory (NREL), Golden, CO (United States)
2 shared publications
Latest Publications
- Open Access
- 9 January 2026
- Published by Office of Scientific and Technical Information (OSTI)
Ceramic Membrane Solar Desal: Pilot System Design and Full-Scale System Techno-Economic Analysis (CRADA Final Report)
This work is conducted in support of the American Made Challenges Solar Prize. The current scope addresses the Design portion of the overall prize competition. This team, led by the University of Connecticut, will design a solar powered, pilot scale, ceramic-based membrane distillation system that can operate on high salinity waters and propose that design for construction in the Test phase of the Prize competition.
- 9 January 2026
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessCeramic Membrane Solar Desal: Pilot System Design and Full-Scale System Techno-Economic Analysis (CRADA Final Report)
This work is conducted in support of the American Made Challenges Solar Prize. The current scope addresses the Design portion of the overall prize competition. This team, led by the University of Connecticut, will design a solar powered, pilot scale, ceramic-based membrane distillation system that can operate on high salinity waters and propose that design for construction in the Test phase of the Prize competition.
- Open Access
- 23 October 2024
- Published by Office of Scientific and Technical Information (OSTI)
Heliostat Consortium Annual Report: 2024
In 2021, the U.S. Department of Energy's (DOE's) Solar Energy Technologies Office (SETO) funded the formation of the Heliostat Consortium (HelioCon), a five-year consortium designed to advance U.S. heliostat technologies by engaging industry, subject matter experts, and general stakeholders for direct project-level collaboration, external consulting, and mission-specific panels and workshops. HelioCon is led by the National Renewable Energy Laboratory (NREL) and Sandia National Laboratories, in partnership with the Australian Solar Thermal Research Institute. This report describes HelioCon's activities and impact in fiscal year 2024.
- 23 October 2024
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessHeliostat Consortium Annual Report: 2024
In 2021, the U.S. Department of Energy's (DOE's) Solar Energy Technologies Office (SETO) funded the formation of the Heliostat Consortium (HelioCon), a five-year consortium designed to advance U.S. heliostat technologies by engaging industry, subject matter experts, and general stakeholders for direct project-level collaboration, external consulting, and mission-specific panels and workshops. HelioCon is led by the National Renewable Energy Laboratory (NREL) and Sandia National Laboratories, in partnership with the Australian Solar Thermal Research Institute. This report describes HelioCon's activities and impact in fiscal year 2024.
- 11 October 2024
- Published by Elsevier in Computers & Fluids
- Vol. 285
A numerical method for simulating variable density flows in membrane desalination systems
- 11 October 2024
- Published by Elsevier in Computers & Fluids
- Vol. 285
A numerical method for simulating variable density flows in membrane desalination systems
- 1 September 2021
- Published by Office of Scientific and Technical Information (OSTI)
The Role of Concentrating Solar-Thermal Technologies in a Decarbonized U.S. Grid
The U.S. Department of Energy's Office of Scientific and Technical Information
- 1 September 2021
- Published by Office of Scientific and Technical Information (OSTI)
The Role of Concentrating Solar-Thermal Technologies in a Decarbonized U.S. Grid
The U.S. Department of Energy's Office of Scientific and Technical Information
- Open Access
- 16 July 2021
- Published by ASME International
Operational Modes and System Design of a 2.0 Mwth Sodium Molten Salt Pilot System
In the receiver, sodium has a distinct performance advantage compared to baseline molten salts, due to its excellent conductivity, resulting in \~8% higher annual solar-to-electric efficiency. Nitrate molten salt concentrating solar power (CSP) systems are currently deployed globally and are considered to be state-of the art heat transfer fluids (HTFs) for present day
- 16 July 2021
- Published by ASME International
Open AccessOperational Modes and System Design of a 2.0 Mwth Sodium Molten Salt Pilot System
In the receiver, sodium has a distinct performance advantage compared to baseline molten salts, due to its excellent conductivity, resulting in \~8% higher annual solar-to-electric efficiency. Nitrate molten salt concentrating solar power (CSP) systems are currently deployed globally and are considered to be state-of the art heat transfer fluids (HTFs) for present day
- 1 July 2021
- Published by Office of Scientific and Technical Information (OSTI)
CSP Gen3: Liquid-Phase Pathway to SunShot
The U.S. Department of Energy's Office of Scientific and Technical Information
- 1 July 2021
- Published by Office of Scientific and Technical Information (OSTI)
CSP Gen3: Liquid-Phase Pathway to SunShot
The U.S. Department of Energy's Office of Scientific and Technical Information
- 1 July 2021
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 226
Technical and economic feasibility of molten chloride salt thermal energy storage systems
- 1 July 2021
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 226
Technical and economic feasibility of molten chloride salt thermal energy storage systems
- 1 June 2021
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 225
Internal insulation and corrosion control of molten chloride thermal energy storage tanks
- 1 June 2021
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 225
Internal insulation and corrosion control of molten chloride thermal energy storage tanks
- Open Access
Evaluation of Formate Salt PCM’s for Latent Heat Thermal Energy Storage
This work examines formate salts as potential phase change materials (PCMs) for middle-high temperature (≤250 °C) latent heat thermal energy storage applications. The thermophysical properties of three formate salts were characterized: pure sodium formate and binary blends of sodium/potassium formate and sodium/calcium formate. The stability of formate PCM’s was evaluated by thermal cycling using differential scanning calorimetry where sodium formate and sodium/potassium formate appeared stable over 600 cycles, while sodium/calcium formate exhibited a monotonic decrease in heat of fusion over the test period. A longer test with sodium formate led to gas release and decomposition of the salt. FTIR analysis of the PCM showed degradation of formate to oxalate. T-history experiments with 50-g PCM quantities demonstrated a bulk supercooling of only 2–3 °C for these salts. Thermal conductivity enhancement of over 700% was achieved by embedding aluminum in the solid PCM. Finally, mild carbon steel was immersed in molten sodium formate for up to 2000 h. Sodium formate was found to be non-corrosive, as calculated by mass loss and confirmed by cross-sectional high-resolution microscopy. FTIR analysis of the PCM after 2000 h shows oxidation at the free surface, while the bulk PCM remained unchanged, further indicating a need to protect the formate from atmospheric exposure when used as a PCM.
Open AccessEvaluation of Formate Salt PCM’s for Latent Heat Thermal Energy Storage
This work examines formate salts as potential phase change materials (PCMs) for middle-high temperature (≤250 °C) latent heat thermal energy storage applications. The thermophysical properties of three formate salts were characterized: pure sodium formate and binary blends of sodium/potassium formate and sodium/calcium formate. The stability of formate PCM’s was evaluated by thermal cycling using differential scanning calorimetry where sodium formate and sodium/potassium formate appeared stable over 600 cycles, while sodium/calcium formate exhibited a monotonic decrease in heat of fusion over the test period. A longer test with sodium formate led to gas release and decomposition of the salt. FTIR analysis of the PCM showed degradation of formate to oxalate. T-history experiments with 50-g PCM quantities demonstrated a bulk supercooling of only 2–3 °C for these salts. Thermal conductivity enhancement of over 700% was achieved by embedding aluminum in the solid PCM. Finally, mild carbon steel was immersed in molten sodium formate for up to 2000 h. Sodium formate was found to be non-corrosive, as calculated by mass loss and confirmed by cross-sectional high-resolution microscopy. FTIR analysis of the PCM after 2000 h shows oxidation at the free surface, while the bulk PCM remained unchanged, further indicating a need to protect the formate from atmospheric exposure when used as a PCM.