Ozlem Karsli
Research Subjects
Ozlem Karsli has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Avni Aksoy
Institute of Accelerator Technologies Ankara University Ankara Turkey
4 shared publications - Evrim Colak
Department of Electrical Engineering, Ankara University, 06830 Golbasi, Turkey
3 shared publications Caglar Kaya
Ankara University, Institute of Accelerator Technologies, 06830, Golbasi, Ankara, Turkey
2 shared publications- Mustafa Dogan
Faculty of Electrical and Electronics Engineering Control and Automation Engineering Department, Istanbul Technical University, Maslak, Istanbul 34469, Türkiye
2 shared publications Ömer Yavaş
2 shared publicationsAhmet Sahin
13Hacettepe Teknokent 5. AR-GE binası, Hacettepe Universitesi Beytepe Kampusu, Cankaya, Ankara 06800, Türkiye
1 shared publication
Latest Publications
- 30 June 2026
- Published by Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering in Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering
- Vol. 68 (1) , 75-91
High Power Travelling Wave Ring for Testing Rf Components at TARLA
TARLA (Turkish Accelerator and Radiation Laboratory) is the first accelerator-based light source user facility in Türkiye. It is designed to produce free electron laser (FEL) radiation in the mid-infrared region, spanning wavelengths from 5 to 350 μm, as well as Bremsstrahlung radiation in the 10-30 MeV energy range, utilizing electron beams with energies between 10 and 40 MeV for fundamental and applied research. The facility will accommodate four experimental stations alongside an FEL diagnostics laboratory. Currently, two stations, dedicated to advanced material science and material characterization, are under preparation for user experiments. Additionally, TARLA incorporates a dedicated radiofrequency (RF) infrastructure designed to facilitate high-power RF research. As part of this infrastructure, a microwave pulse compressor system has been designed and implemented. To further enhance high-power RF testing capabilities, two resonant ring test bench configurations, employing closed-loop waveguide structures, were conceived and subjected to comprehensive electromagnetic simulations. Comparative evaluation of these designs indicated that one of the resonant rings, featuring a hybrid coupler integrated with a manual phase shifter, demonstrates superior resonance precision and power saturation characteristics. This configuration attains a power gain of approximately 11–12 dB, thereby enabling effective signal amplification and stable operation for device under test (DUT) assessments at elevated RF power levels. The selected resonant ring architecture offers a technically robust and cost-efficient solution for high-power RF component testing, addressing critical needs in accelerator technology and allied domains such as radar systems, vacuum electronics, and aerospace applications. This study details the design methodology, simulation procedures, and performance optimization of the chosen resonant ring test bench slated for deployment at TARLA.
- 30 June 2026
- Published by Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering in Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering
- Vol. 68 (1) , 75-91
High Power Travelling Wave Ring for Testing Rf Components at TARLA
TARLA (Turkish Accelerator and Radiation Laboratory) is the first accelerator-based light source user facility in Türkiye. It is designed to produce free electron laser (FEL) radiation in the mid-infrared region, spanning wavelengths from 5 to 350 μm, as well as Bremsstrahlung radiation in the 10-30 MeV energy range, utilizing electron beams with energies between 10 and 40 MeV for fundamental and applied research. The facility will accommodate four experimental stations alongside an FEL diagnostics laboratory. Currently, two stations, dedicated to advanced material science and material characterization, are under preparation for user experiments. Additionally, TARLA incorporates a dedicated radiofrequency (RF) infrastructure designed to facilitate high-power RF research. As part of this infrastructure, a microwave pulse compressor system has been designed and implemented. To further enhance high-power RF testing capabilities, two resonant ring test bench configurations, employing closed-loop waveguide structures, were conceived and subjected to comprehensive electromagnetic simulations. Comparative evaluation of these designs indicated that one of the resonant rings, featuring a hybrid coupler integrated with a manual phase shifter, demonstrates superior resonance precision and power saturation characteristics. This configuration attains a power gain of approximately 11–12 dB, thereby enabling effective signal amplification and stable operation for device under test (DUT) assessments at elevated RF power levels. The selected resonant ring architecture offers a technically robust and cost-efficient solution for high-power RF component testing, addressing critical needs in accelerator technology and allied domains such as radar systems, vacuum electronics, and aerospace applications. This study details the design methodology, simulation procedures, and performance optimization of the chosen resonant ring test bench slated for deployment at TARLA.
- Open Access
- 13 January 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (4) , 045901
The first electron beam of Turkish Accelerator and Radiation Laboratory (TARLA): the commissioning of TARLA 20 MeV beamline
Turkish Accelerator and Radiation Laboratory (TARLA) is proposed as the first accelerator-based user facility within the framework of the Turkish Accelerator Center project initiative. Following the completion of technical design studies and infrastructure development, the installation of accelerator components commenced. TARLA is designed to produce free-electron laser (FEL) and bremsstrahlung radiation utilizing state-of-the-art superconducting accelerator technology. The facility aims to operate FELs in the wavelength range of 5–350 µm by accelerating electrons to energies between 15 and 40 MeV, and to generate bremsstrahlung radiation with electrons accelerated up to 30 MeV. As a major milestone, the first stable electron beam was successfully generated in April 2024, marking the completion of the facility’s first operational phase. This study presents the commissioning efforts for the electron beam, outlines the current operational status of the facility, and discusses future plans and the research potential of TARLA.
- 13 January 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (4) , 045901
Open AccessThe first electron beam of Turkish Accelerator and Radiation Laboratory (TARLA): the commissioning of TARLA 20 MeV beamline
Turkish Accelerator and Radiation Laboratory (TARLA) is proposed as the first accelerator-based user facility within the framework of the Turkish Accelerator Center project initiative. Following the completion of technical design studies and infrastructure development, the installation of accelerator components commenced. TARLA is designed to produce free-electron laser (FEL) and bremsstrahlung radiation utilizing state-of-the-art superconducting accelerator technology. The facility aims to operate FELs in the wavelength range of 5–350 µm by accelerating electrons to energies between 15 and 40 MeV, and to generate bremsstrahlung radiation with electrons accelerated up to 30 MeV. As a major milestone, the first stable electron beam was successfully generated in April 2024, marking the completion of the facility’s first operational phase. This study presents the commissioning efforts for the electron beam, outlines the current operational status of the facility, and discusses future plans and the research potential of TARLA.
- Open Access
- 1 December 2019
- Published by Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering in Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering
- Vol. 61 (2) , 181-196
OPERATION TESTS of the 260 MHz 1500 W SOLID STATE RF AMPLIFIER at TARLA FACILITY
Turkish Accelerator and Radiation Laboratory (TARLA) will be the first accelerator-based user facility in Turkey. The facility is under construction at the Institute of Accelerator Technologies of Ankara University. Based on the state-of-art superconducting technology, TARLA accelerator offers a multi-experimental facility providing a variety of accelerator-based radiation sources for users coming from various fields like chemistry, physics, biology, material sciences, medicine and nanotechnology. TARLA consists of two acceleration lines: the first one is the injector that provides high current continuous wave (CW) electron beam at 250 keV energy, and the second one is the main accelerator that comprises of two superconducting (SC) cryomodules separated by a bunch compressor in order to accelerate the electron beam up to 40 MeV energy. Two normal conducting accelerators, so called subharmonic (SHB) and fundamental (FB) buncher cavities whose operation frequencies are 260 and 1300 MHz, respectively, are used to compress the electron bunches from ~600 ps to ~10 ps. SHB cavity is powered by a 1500 W Radio-frequency (RF) power amplifier. Currently, the electron gun training, and superconducting modules acceptance tests, personal safety system, and helium cryogenic system commissioning tests are performed simultaneously. In this study, we present the operation tests of the 1500 W RF amplifier in the scope of the commissioning tests of injector line which showed phase drift coefficents of ~0.5 deg/Co and ~0.67 deg/Co in repeated tests. Moreover, the importance of constancy of the water pressure in the water-cooling line for phase constancy of the delivered power has become evident as a result of current obervations.
- 1 December 2019
- Published by Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering in Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering
- Vol. 61 (2) , 181-196
Open AccessOPERATION TESTS of the 260 MHz 1500 W SOLID STATE RF AMPLIFIER at TARLA FACILITY
Turkish Accelerator and Radiation Laboratory (TARLA) will be the first accelerator-based user facility in Turkey. The facility is under construction at the Institute of Accelerator Technologies of Ankara University. Based on the state-of-art superconducting technology, TARLA accelerator offers a multi-experimental facility providing a variety of accelerator-based radiation sources for users coming from various fields like chemistry, physics, biology, material sciences, medicine and nanotechnology. TARLA consists of two acceleration lines: the first one is the injector that provides high current continuous wave (CW) electron beam at 250 keV energy, and the second one is the main accelerator that comprises of two superconducting (SC) cryomodules separated by a bunch compressor in order to accelerate the electron beam up to 40 MeV energy. Two normal conducting accelerators, so called subharmonic (SHB) and fundamental (FB) buncher cavities whose operation frequencies are 260 and 1300 MHz, respectively, are used to compress the electron bunches from ~600 ps to ~10 ps. SHB cavity is powered by a 1500 W Radio-frequency (RF) power amplifier. Currently, the electron gun training, and superconducting modules acceptance tests, personal safety system, and helium cryogenic system commissioning tests are performed simultaneously. In this study, we present the operation tests of the 1500 W RF amplifier in the scope of the commissioning tests of injector line which showed phase drift coefficents of ~0.5 deg/Co and ~0.67 deg/Co in repeated tests. Moreover, the importance of constancy of the water pressure in the water-cooling line for phase constancy of the delivered power has become evident as a result of current obervations.
- 1 November 2019
- Published by Canadian Science Publishing in Canadian Journal of Physics
- Vol. 97 (11) , 1171-1176
High power RF operations studies at TARLA facility
Turkish Accelerator and Radiation Laboratory (TARLA) is a facility capable of accelerating an electron beam up to 40 MeV. Two beamlines were proposed to generate free-electron laser radiation and bremsstrahlung. The accelerator employs two normal conducting cavities, so-called buncher cavities: subharmonic buncher (SHB) and fundamental buncher (FB), and two cryomodules that house two TESLA cavities each. SHB operates in 260 MHz and FB in 1.3 GHz, and is powered by 1.5 kW and 500 W radio frequency (RF) amplifiers, respectively. Each TESLA cavity is driven by 18 kW saturated high-power solid-state amplifiers (SSA). In addition, a L band pulse compressor system is designed and implemented at the facility to actively promote high-power RF research. Currently, setup of a resonant ring test bench is approved to test the RF components under high power RF conditions. This paper describes the TARLA high power RF, RF controller, and network structures. High power tests and measurements of the RF components of the TARLA beamline are given. Outcomes from the operation of the L band pulse compressor are explained, and the resonant ring test stand is stated as a summary.
- 1 November 2019
- Published by Canadian Science Publishing in Canadian Journal of Physics
- Vol. 97 (11) , 1171-1176
High power RF operations studies at TARLA facility
Turkish Accelerator and Radiation Laboratory (TARLA) is a facility capable of accelerating an electron beam up to 40 MeV. Two beamlines were proposed to generate free-electron laser radiation and bremsstrahlung. The accelerator employs two normal conducting cavities, so-called buncher cavities: subharmonic buncher (SHB) and fundamental buncher (FB), and two cryomodules that house two TESLA cavities each. SHB operates in 260 MHz and FB in 1.3 GHz, and is powered by 1.5 kW and 500 W radio frequency (RF) amplifiers, respectively. Each TESLA cavity is driven by 18 kW saturated high-power solid-state amplifiers (SSA). In addition, a L band pulse compressor system is designed and implemented at the facility to actively promote high-power RF research. Currently, setup of a resonant ring test bench is approved to test the RF components under high power RF conditions. This paper describes the TARLA high power RF, RF controller, and network structures. High power tests and measurements of the RF components of the TARLA beamline are given. Outcomes from the operation of the L band pulse compressor are explained, and the resonant ring test stand is stated as a summary.
- 3 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 47 (6) , 2823-2831
Implementation of High Power Microwave Pulse Compressor
High-frequency power amplifiers can be equipped with complementary pulse-compressor systems to fulfill the advanced cavity power requirements. Microwave pulse compression is a power extraction method based on pulsewidth reduction and electronic triggering. The cavity is fed by pulsed-RF source, the resonance is evolved at t ≥ t 0 , t 0 = cavity filling time. Established standing waves or resonance condition is brokendown by triggered plasma switch programmed with adjustable delay and pulsewidth. This causes the stored energy to be transmitted as shorter output RF-pulse. The implementation of a microwave pulse compression system requires careful measurements and structural modifications to be able to tune design parameters for optimal setup. In the scope of this paper, the experimental results are obtained for different waveguide lengths and various load configurations (to exploit new opportunities). All connections, iris configuration, and precise adjustment of plasma triggering have been set up cautiously. The cavity gain is increased up to 23 dB with trigatron driving improvements. High power requirements and demands are investigated for many applications, particularly for biomedical science projects.
- 3 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 47 (6) , 2823-2831
Implementation of High Power Microwave Pulse Compressor
High-frequency power amplifiers can be equipped with complementary pulse-compressor systems to fulfill the advanced cavity power requirements. Microwave pulse compression is a power extraction method based on pulsewidth reduction and electronic triggering. The cavity is fed by pulsed-RF source, the resonance is evolved at t ≥ t 0 , t 0 = cavity filling time. Established standing waves or resonance condition is brokendown by triggered plasma switch programmed with adjustable delay and pulsewidth. This causes the stored energy to be transmitted as shorter output RF-pulse. The implementation of a microwave pulse compression system requires careful measurements and structural modifications to be able to tune design parameters for optimal setup. In the scope of this paper, the experimental results are obtained for different waveguide lengths and various load configurations (to exploit new opportunities). All connections, iris configuration, and precise adjustment of plasma triggering have been set up cautiously. The cavity gain is increased up to 23 dB with trigatron driving improvements. High power requirements and demands are investigated for many applications, particularly for biomedical science projects.
- 1 July 2018
- Published by Canadian Science Publishing in Canadian Journal of Physics
- Vol. 96 (7) , 837-842
Current status of Turkish accelerator and radiation laboratory in Ankara: the TARLA facility
The Turkish Accelerator and Radiation Laboratory in Ankara, abbreviated as the TARLA facility, is proposed as the first facility of Turkish Accelerator Center (TAC) project. TARLA is under construction in Golbasi campus of Ankara University by coordination of the Institute of Accelerator Technologies (IAT). TARLA is designed to generate free-electron laser (FEL) pulses in mid- and far-infrared regions as well as Bremsstrahlung radiation up to 30 MeV. TARLA is based on superconducting electron accelerators to be operated between 10 and 40 MeV. The main goal of the TARLA facility is to build up a user facility to open up new opportunities for interdisciplinary scientific research and applications, such as materials science, medicine, nanotechnology, life sciences, etc. In this study, main characteristics and subsystems of the TARLA facility are explained and the current status of installation and test studies are given as well. Finally, user and scientific research potential of the facility are also discussed.
- 1 July 2018
- Published by Canadian Science Publishing in Canadian Journal of Physics
- Vol. 96 (7) , 837-842
Current status of Turkish accelerator and radiation laboratory in Ankara: the TARLA facility
The Turkish Accelerator and Radiation Laboratory in Ankara, abbreviated as the TARLA facility, is proposed as the first facility of Turkish Accelerator Center (TAC) project. TARLA is under construction in Golbasi campus of Ankara University by coordination of the Institute of Accelerator Technologies (IAT). TARLA is designed to generate free-electron laser (FEL) pulses in mid- and far-infrared regions as well as Bremsstrahlung radiation up to 30 MeV. TARLA is based on superconducting electron accelerators to be operated between 10 and 40 MeV. The main goal of the TARLA facility is to build up a user facility to open up new opportunities for interdisciplinary scientific research and applications, such as materials science, medicine, nanotechnology, life sciences, etc. In this study, main characteristics and subsystems of the TARLA facility are explained and the current status of installation and test studies are given as well. Finally, user and scientific research potential of the facility are also discussed.
- 1 May 2008
- Published by Elsevier in Infrared Physics & Technology
- Vol. 51 (5) , 378-381
The Turkish accelerator complex IR FEL project
- 1 May 2008
- Published by Elsevier in Infrared Physics & Technology
- Vol. 51 (5) , 378-381
The Turkish accelerator complex IR FEL project