VPV. Pogoriliy

V. Pogoriliy

*This is an algorithmically generated author record based on publicly available information.

V. Pogoriliy has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Performance and reliability assessment of modernized mtus using digital telemetry

    by M. Makarenko, V. Pohorilyy

    The study aims to substantiate and validate a comprehensive methodology for the experimental and analytical assessment of energy effi ciency and reliability of modernized machine-tractor units (MTU) based on digital monitoring of their operating modes. The research is focused on developing a toolkit that allows for a quantitative evaluation of the effects of technical and technological improvements (such as ballasting, hitch adjustment, and tire parameter changes) and the implementation of digital control systems under the actual operating conditions of Ukraine. The methodology integrates results from comparative fi eld trials of baseline and modernized MTU confi gurations during standard operations: soil cultivation, sowing, and transport maneuvers. A key element is the continuous collection of telemetric data via CAN networks (SAE J1939 and ISOBUS/ISO 11783 standards), supplemented by high-precision GNSS positioning and technological process sensor data. To ensure data integrity, a procedure for validating CAN-bus fuel consumption data against reference measurements is provided. Statistical processing of the results is based on paired t-tests, analysis of variance (ANOVA), and regression analysis to assess the impact of soil moisture, slippage, and tillage depth on the fi nal performance indicators. Results. An expanded system of indicators is proposed, including an energy block (specifi c fuel and energy consumption per unit of work, productivity, time, and power utilization coeffi cients) and a reliability block (Mean Time Between Failures – MTBF, Mean Time To Repair – MTTR, and availability coeffi cient). The scientifi c novelty lies in the formalized linking of the unit’s operational states (work, idling, headland turns, stops) with energy metrics based on telemetric classifi cation. It was established that the greatest effect of digital monitoring is achieved not only through the optimization of current modes but also through changes in the operational cycle structure – reducing the share of non-productive time and stabilizing the load, which minimizes the risks of failure. Conclusions. The methodology’s suitability for Ukrainian conditions is proven, where high variability in soil-climatic factors and machinery fl eet heterogeneity require an individualized approach to effi ciency assessment. Application of the methodology allows for a transition from “rated” effi ciency assessment to “operational” effi ciency, providing farms with practical recommendations for reducing fuel consumption, localizing overloads, and increasing operational readiness. Future research prospects are related to expanding the approach to harvesting and spraying operations, as well as unifying data collection protocols for multi-brand fl eets.

  • Transformation of the infrastructure of conformity assessment of agricultural equipment

    by L. Pogorilyy UkrNDIPVT, V. Serbiy, V. Pohorilyi

    Purpose. Ensuring the overcoming of trade barriers, diversifi cation of testing procedures and assessment of conformity of agricultural machinery in accordance with the updated regulatory legal acts of the legislation of Ukraine on technical regulation. Methods. A historical approach was applied in studying the formation of the technical regulation system, a system analysis was used to establish relationships between its elements, and a comparative analysis was used to compare different technical regulation systems. Results. The article analyzes the evolution (stages of formation) of technical regulation and its current state in Ukraine and the world, reveals the challenges and role of the Ukrainian scientifi c research institute of forecasting and testing of machinery and technologies for agricultural production named after L. Phonilyi (hereinafter referred to as the Institute) in establishing the modern level of technical regulation in the agricultural sector, which is a refl ection of regulatory policy in the key European integration direction of the national policy aimed at sustainable development in the fi eld of economics, law, ecology, energy effi ciency, national security, social protection, and digitalization of the economy. The current state of the technical regulation system was analyzed, key problems in the functioning of conformity assessment bodies, testing laboratories and market surveillance bodies were identifi ed. The directions of modernization of the conformity assessment infrastructure were substantiated, taking into account the requirements of European Union legislation and the needs of the agricultural sector. A set of measures was proposed to increase the effi ciency, transparency and international recognition of the results of conformity assessment of agricultural machinery. Conclusions. Based on the analysis of the effectiveness of new approaches to assessing and confi rming conformity, the interest of respondents by groups of questions was determined. The state of scientifi c and methodological support and technical base for assessing the conformity of agricultural machinery in specialized testing laboratories (TL) was determined. The use of modern information and digital technologies and equipment requires the creation of new methods of conformity assessment. Simulation during fi eld, bench and simulation tests of agricultural machinery is specifi ed in Commission Delegated Regulation (EU) No. 1322/2014 laying down technical requirements and test methods for the design of agricultural and forestry vehicles with a view to reducing manufacturers’ costs, and detailed conditions for virtual testing are established.

  • VALIDATION OF TELEMETRY SYSTEM INDICATORS FOR ASSESSING THE OPERATIONAL PARAMETERS OF MOBILE AGGREGATES

    by S. Khalin, V. Pohorilyy, V. Serbiy, V. Maidanovych

    The purpose of the study is to evaluate the use of data from standard telemetry systems (onboard computers) to determine the operational and technological parameters of machine-tractor aggregates (MTAs), specifi cally productivity and fuel consumption, as well as to compare the accuracy of this data with results obtained through classical chronometry. Methods. Field studies were conducted with three tractors – a Claas Axion 930, a John Deere 8345R, and a Fendt 936 Vario – which were aggregated with an 8-furrow reversible plow. The work was performed on deep medium-loam chernozem soil while plowing at a depth of 30 cm and 35 cm. Operational parameters were recorded using two methods: 1) using the standard onboard computers (CEBIS, CommandCenter, Vario); 2) using a control method of continuous chronometry, which included direct time measurements with a stopwatch and determination of fuel consumption using an external calibrated measuring device. Results. A comparative analysis revealed discrepancies between the data from the onboard computers (OBCs) and the control measurements. Regarding productivity, the average deviation of the OBC data from the chronometry data was approximately ±8%. The largest deviation was recorded for the John Deere system (on average ~17%), while the Fendt system proved to be the most accurate (with deviations in the range of 0.4-4.5%). Regarding total fuel consumption, the average deviation was smaller, at approximately ±4.4%. The John Deere system showed the lowest error (1.6%), while the Claas system had the highest (6.8%). Conclusions. Standard telemetry systems are an important tool for monitoring MTAs; however, the data obtained can have signifi cant deviations from actual values. The results highlight the critical need for regular calibration and validation of OBC data before it is used for precise scientifi c tests, fi nancial accounting, or making critical management decisions. The use of uncalibrated data can lead to erroneous conclusions and a decrease in agricultural production effi ciency

  • VALIDATION OF TELEMETRY SYSTEM INDICATORS FOR ASSESSING THE OPERATIONAL PARAMETERS OF MOBILE AGGREGATES

    by L. Pogorilyy UkrNDIPVT, S. Khalin, V. Pohorilyy, V. Serbiy, V. Maidanovych

    The purpose of the study is to evaluate the use of data from standard telemetry systems (onboard computers) to determine the operational and technological parameters of machine-tractor aggregates (MTAs), specifi cally productivity and fuel consumption, as well as to compare the accuracy of this data with results obtained through classical chronometry. Methods. Field studies were conducted with three tractors – a Claas Axion 930, a John Deere 8345R, and a Fendt 936 Vario – which were aggregated with an 8-furrow reversible plow. The work was performed on deep medium-loam chernozem soil while plowing at a depth of 30 cm and 35 cm. Operational parameters were recorded using two methods: 1) using the standard onboard computers (CEBIS, CommandCenter, Vario); 2) using a control method of continuous chronometry, which included direct time measurements with a stopwatch and determination of fuel consumption using an external calibrated measuring device. Results. A comparative analysis revealed discrepancies between the data from the onboard computers (OBCs) and the control measurements. Regarding productivity, the average deviation of the OBC data from the chronometry data was approximately ±8%. The largest deviation was recorded for the John Deere system (on average ~17%), while the Fendt system proved to be the most accurate (with deviations in the range of 0.4-4.5%). Regarding total fuel consumption, the average deviation was smaller, at approximately ±4.4%. The John Deere system showed the lowest error (1.6%), while the Claas system had the highest (6.8%). Conclusions. Standard telemetry systems are an important tool for monitoring MTAs; however, the data obtained can have signifi cant deviations from actual values. The results highlight the critical need for regular calibration and validation of OBC data before it is used for precise scientifi c tests, fi nancial accounting, or making critical management decisions. The use of uncalibrated data can lead to erroneous conclusions and a decrease in agricultural production effi ciency. Keywords: telemetry, telematics, precision agriculture, GPS, ISOBUS, on-board computer, calibration, operational and technological indicator, machine-tractor aggregate (MTA).

  • METHODOLOGICAL APPROACHES TO ASSESSING THE SAFETY RISKS OF AGRICULTURAL MACHINERY STRUCTURES IN TERMS OF EU MARKET REQUIREMENTS

    by L. Pogoriliyy UkrNDIPVT, S. Khalin, V. Pogoriliy, V. Sydorenko, Y. Fordzyun, Mukachevo State University

    Summary Research objective. Ensuring the safety of agricultural machinery at the level of modern requirements following the Technical Regulation on the Safety of Machinery and the EU Directive 2006/42/EC under the responsibility of the manufacturer and minimizing the negative consequences of residual risks. Research methods. Analysis of regulatory approaches to risk assessment and adaptation of the graph method in its application based on the justification of the safety of the grain dryer design. Research results. The general principles of risk assessment and various methods of its implementation are considered. It is noted that domestic products must undergo several procedures to comply with European directives, one of which is risk assessment. The results of substantiation of the safety of the grain dryer design using the risk graph method are presented, which allowed reducing the likelihood of injuries and ensuring acceptable levels of risks during its use. Conclusions. The introduction of safe agricultural machinery into circulation is mandatory at the legislative level and must be ensured by conducting a risk assessment, which is a mandatory component of this process. Ukrainian manufacturers are not completely adapted to changes in technical regulation, which require risk assessment, and existing methods are quite laborious and do not take into account their features. The proposed graph method is relatively simple and easy to use, allows you to take into account all safety parameters and is acceptable for conducting a risk assessment when substantiating the safety of agricultural machinery, which was demonstrated by conducting this procedure on the example of a grain dryer. Keywords: machinery safety, risk assessment, hazard identification, risk analysis, risk reduction

  • ON THE ISSUE OF INDIVIDUAL APPROVAL AND REGISTRATION OF AGRICULTURAL AND FORESTRY TRACTORS IN EU COUNTRIES

    by L. Pogorilyy UkrNDIPVT, S. Khalin, V. Pohorilyy, L. Kozyaruk, V. Voynovskyi, E. Lyutyi, Mukachevo State University

    The purpose of the research: is to establish the peculiarities of the national procedures for assessing the conformity of individual model tractors during their registration in the EU countries. Methods: analysis and systematization of the legal and technical bases of the legislation of the EU countries in the field of national individual approval and registration of agricultural and forestry tractors. Results. Individual national approval of vehicles is one of the procedures for assessing the conformity of agricultural and forestry vehicles, which, along with pan-European and national type approval at the request of the manufacturer, is used when agricultural vehicles are admitted to the market at the request of the manufacturer/importer or consumer. Individual national approval of vehicles is implemented according to simplified procedures, as a rule, the requirements are set out in legal documents regulating the registration procedure and are implemented by technical services or specially authorized experts. The implementation of the updated all-Union European technical legislation can only be a part of the normative legal framework of Ukraine, which regulates the issue of putting vehicles into circulation and operation. It is also necessary to develop and adopt separate legal acts that establish: - the national type approval (approval) procedure; - procedures for approval and confirmation of compliance of individual vehicles that have not received type approval in Ukraine and the EU, used, self-assembled and converted vehicles registered for the first time in Ukraine. Conclusion. The introduction in Ukraine of the procedure for individual approval of the conformity of agricultural and forestry tractors and the corresponding legal framework will make it possible to eliminate existing gaps in the assessment of the conformity of single vehicles, will create more favorable conditions for business development, will simplify the procedure for registering used vehicles, in general, will form transparent and clearly defined rules for the introduction into circulation and/or operation of vehicles in Ukraine. Keywords: conformity assessment, legislation, individual approval, EU regulation, registration, agricultural tractor, safety.

  • INFLUENCE OF DESIGN FEATURES OF PNEUMATIC SEEDERS ON THE LEVEL OF PESTICIDE DUST DRIFT

    by L. Pogorilyy UkrNDIPVT, V. Pogorilyy, N. Maidanovych, S. Sidorenko, V. Maidanovych, O. Klochay

    This study aims to analyze the level of emissions and pesticide drift during the use of treated seeds, assess the factors influencing their intensity, and develop recommendations for reducing environmental risks. Methods and Materials. The study employs modern methods of analytical chemistry, mathematical modeling, and field experiments. A new methodological approach was used to measure emissions of drifting seed protection agents into the environment. This method is based on photo colorimetric analysis and compares the intensity of color solutions of different concentrations (optical density). A KFK-3 photoelectric photometer was used to measure optical density. The technical characteristics of the seeder fan’s exhaust system were tested per DSTU ISO 17962 during the operation of pneumatic seeders Horsch Maestro 24 SW AHL and Horsch Maestro 24 SX Liquid. Results. Field and stationary experiments established that the total dust emissions from seed treatment agents can reach 3-5% of the total applied material. Pesticide dust drift, carried by wind currents beyond the immediate working zone of the seeder, averaged between 0.9% and 1.3%, with maximum recorded values of 1.26% for the Horsch Maestro 24 SW AHL and 0.92% for the Horsch Maestro 24 SX Liquid. The average particle diameter of the dust ranged from 0.5 to 1.5 µm at an optical density of 0.3-0.5. These values do not exceed the DSTU ISO 17962 requirements (1.5%) and comply with the German recommendations on pesticide drift limitation (not more than 2.77% at a distance of 1 m from the working path). It was found that the Horsch Maestro 24 SX Liquid, which operates on the principle of overpressure, reduces dust drift by 25% compared to the vacuum-based Horsch Maestro 24 SW AHL due to the design features of the metering system and the increased number of exhaust outlets. The air velocity of the Horsch Maestro 24 SW AHL and Horsch Maestro 24 SX Liquid seeders does not exceed 4 m/s at a distance of 2 m from the exhaust outlets. In the new model, the minimization of airflow impact is further ensured by the uniform distribution of air across 24 outlets and the dissipation of a significant portion of excess pressure directly into the soil. Conclusions. The proposed methodology for determining pesticide seed treatment material emissions and dust drift during the operation of pneumatic seeders Horsch Maestro 24 SW AHL and Horsch Maestro 24 SX Liquid has demonstrated sufficient suitability for achieving the research objectives. The study analyzed the impact of design features of pneumatic seeders and environmental factors on the volume and distribution of seed treatment dust within and beyond the seeding zone. Recommendations have been provided to mitigate the negative impact of treated seed dust on the environment and human health. Keywords: pesticide dust, seed treatment, pneumatic seeder, dust drift.

  • APPLICATION OF THE OPERATIONAL METHOD OF DETERMINING THE TYPE AND QUANTITY OF WOOD HARVESTING MACHINES IN THE CONDITIONS OF SE «FORESTS OF UKRAINE»

    by Lviv branch of L. Pogorilyy UkrNDIPVT, Ya. Salo, V. Dumych, O. Machuga, O. Styranivskyi, N. Shevchenko, M. Gerys, National Forestry University of Ukraine, Yu. Hromyak, Western interregional management of forestry and hunting

    The purpose of research: to determine the influence of different methods of sowing on the formation of seed yield and the efficiency of sunflower cultivation in the soil and climatic conditions of Western Ukraine. Methods. Field research was conducted in the soil and climatic conditions of Western Ukraine. The experimental field was characterized by sod deep clayey sandy soils. Two methods of sunflower sowing were studied: traditional with a row spacing of 70 cm using a «Gaspardo Renata R MTR 8» precision seeding vacuum planter and narrow-row sowing with a row spacing of 12.5 cm – the «Gaspardo Corona 600» seeding complex. During the research, the structural elements of sunflower seed productivity and the efficiency of two methods of sowing were estimated. Results: According to the research results it was established that in the variant with traditional sowing the average number of seeds in the basket was greater. The same trend was also observed concerning basket size, seed weight, and productivity of one plant, which made it possible to form a sunflower seed yield of 1.67 t/ha, which is 0.14 t/ha (by 9.1%) more than in the plot with narrow-row sowing. Direct operational use of technical means for performing technological operations of soil preparation, fertilizer application, and seed sowing in traditional sowing amounts to UAH 2,541/ha and is higher by UAH 667/ha compared to costs in the narrow-row variant. However, due to the higher yield in the version of traditional sowing, a higher income from the sale of seed was obtained by 1890 hryvnias/ha. Therefore, the effectiveness of the applied technical and technological solutions on the plot with traditional sowing amounted to 1223 hryvnias/ha. Conclusions. The «Gaspardo Corona 600» sowing complex can perform narrow-row sowing of sunflower seeds with the specified sowing rate in the conditions of Western Ukraine. Although a slightly lower yield was obtained in the variant with narrow-row sowing, direct operating costs for pre-sowing soil cultivation and sowing are lower than for technical and technological solutions for implementing traditional wide-row sowing. The results of using the «Gaspardo Corona 600» sowing complex for sunflower sowing can be useful for farmers when deciding to buy a row drill and save the financial resources of farms. Keywords: sunflower, methods of sowing seeds, row seeder, sowing complex, productivity, efficiency.

  • USING THE PRINCIPLES OF KINEMODYNAMICS FOR TRACTION TESTS OF MOBILE MACHINES

    by А. Korobko, Kharkiv branch of L. Pogorilyy UkrNDIPVT, V. Pogorilyy, V. Shein, L. Pogorilyy UkrNDIPVT, Kharkiv National Automobile and Highway University

    The study aims to develop a method for traction testing of mobile machines using the principles of kinemodynamics. To achieve these goals, it is necessary to: justify the method of traction testing of mobile machines using the principles of kinemodynamics; and carry out experimental validation of the proposed test method. Methods and materials. The methodological basis of the work is the principles of kinemodynamics, namely partial accelerations. The development of a test method consists of determining the possibility of measuring the established indicators and assessing the method’s suitability. To determine the power and energy characteristics of mobile machines, it is proposed to use a measuring complex consisting of a linear accelerometer and special software for processing the measured data. Results. A method for traction testing of mobile machines using the principles of kinemodynamics has been developed; experimental validation of the proposed test method was carried out. The essence of the method is the direct measurement of longitudinal accelerations that occur during the acceleration of a car and the subsequent processing of the results of these measurements, using an energy approach based on determining the change (difference) in the kinetic energy of the car over a certain period. This made it possible to determine the force on the wheels of the car, which leads to its acceleration (or maintaining uniformly accelerated motion) and the share of engine power spent on this car. An experimental validation of the developed method was carried out, which consisted of determining the coefficient of agreement of test results with variations in certain specific factors. Conclusions. The use of the principles of kinemodynamics allows us to determine the fraction of force that leads to acceleration during the acceleration of the car and the fraction of engine power expended. Based on the test results obtained by the proposed method, the following analysis can be made: determine the conditions (gear ratio in the gearbox) under which maximum acceleration is possible, determining the share of the maximum possible design force in each gear used to accelerate the machine; determine the weighted average power reserve of the machine engine, which can be used to overcome additional interference. Experimental validation of the proposed method in terms of agreement showed satisfactory results. Keywords: traction tests, method, coincidence coefficient, power, traction force, acceleration.

  • PROBLEMS OF DUST EMISSIONS AND DRIFT OF SEED TREATMENTS IN THE SOWING PROCESS: A REVIEW

    by M. Novokhatsky, L. Pogorilyy UkrNDIPVT, V. Pogorilyy, S. Sidorenko, V. Maidanovych, O. Klochay

    The purpose of the work: assessment of the risks of poisoning beneficial pollinating insects by analyzing the problem of the drift of poisoner materials used to disinfect the seeds of row crops and sowing poisoned seeds with pneumatic seeders. Materials and methods. The analysis was carried out based on the results of a review of global scientific and technical achievements in the specified field with the use of current regulatory documents on the safety of agricultural machines: DSTU EN ISO 12100-2016, ISO 14121-1: 2007 and ISO/TR 14121-2:2007. Results. Most modern planters use a system of pneumatic seed feeding from the hopper to the coulter through a pneumatic line. During the operation of the tractor with the seeder in the field, dust is formed, which, together with the air, enters the pneumatic system of the seeder and acts as a «sandblaster». Captured dust grinds the coating of poisoned seeds, and then takes this mixture with it outside, into the atmosphere. Fine dust is formed mainly due to the insufficient quality of the seed coating process. Coarse dust mainly contains particles of larger sizes that have fallen from the treated seeds. Dust that contains very high levels of pollinator materials can move beyond seeded fields and kill bees and other natural pollinators. In Ukraine and the EU countries, no single clearly established legal act would determine the quantitative limitation of dust emissions when sowing poisoned seeds. The situation in the EU, regarding the regulation of the drift of the mordant, takes place per the legislation of each country, but in compliance with the basic principles and provisions of the Machinery Directive. A coordinating role in this process is played by the Julius-Kuhn Institute, which has developed a register of vacuum planters that meet the requirements for reducing the drift of dust from the seed treatment. Ukraine, moving in the direction of harmonizing legislation and norms to EU requirements, approved the Technical Regulation of Machine Safety - a complete analog of the European Machinery Directive, which contains a separate appendix, that establishes additional essential requirements for safety and health protection, which machine manufacturers must observe during design and manufacture of certain types of machines, including machines intended for the application of pesticides. Standardization of emissions of dust contaminated with seed protection products in Ukraine can be determined and controlled according to DSTU EN ISO 17962:2017. Conclusions. To prevent and reduce emissions and drift of dust from seed treatment agents, a responsible comprehensive approach is necessary, namely: high-quality preparation of seeds for treatment with treatment agents and high-quality application of the treatment agent; making changes to the design of pneumatic seed drills, equipping them with additional dust-catching equipment, or equipment that changes the direction of air movement; if possible, sowing in a period when there is no strong wind. Keywords: poisoner, pneumatic seeder, drift of poisoner dust, poisoned seeds, death of bees, pollinators, pesticides.