Daisuke Satoh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Daisuke Satoh has a total of 147 co-authors. Here are the top co-authors by number of shared publications:
- Tatsunori Shibuya
Non-Destructive Imaging Research Team, Integrated Research Center for Resilient Infrastructure, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Japan
8 shared publications - Hiroshi Ogawa
Research Institute for Measurement and Analytical Instrumentation, National Institute of Advanced Industrial Science and Technology, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568, Japan
7 shared publications M. Yoshida
4 shared publicationsMasahito Tanaka
4 shared publications- Masahito Tanaka
Research Institute for Measurement and Analytical Instrumentation, National Institute of Advanced Industrial Science and Technology, Tsukuba, Japan
4 shared publications - Ryuunosuke Kuroda
National Institute of Advanced Industrial Science and Technology (AIST)
4 shared publications
Latest Publications
- Open Access
- 6 November 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 44 (6)
High-brightness and high-repetition-rate thermionic electron gun for upgrade of a Japanese x-ray free-electron laser facility SACLA
SACLA is a Japanese x-ray free-electron laser (XFEL) facility that has been operating for academic and industrial users. A pulsed high-voltage electron gun equipped with a thermionic cathode made of a single-crystal CeB6 has been used to deliver high-brightness electron beams required for XFEL operation. Recently, an upgrade plan for SACLA based on electron-source technologies was proposed. This plan emphasizes not only upgrading the repetition rate but also improving XFEL light quality. The strategy and progress toward developing an ultimate thermionic electron gun for the SACLA upgrade are described in this paper.
- 6 November 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 44 (6)
Open AccessHigh-brightness and high-repetition-rate thermionic electron gun for upgrade of a Japanese x-ray free-electron laser facility SACLA
SACLA is a Japanese x-ray free-electron laser (XFEL) facility that has been operating for academic and industrial users. A pulsed high-voltage electron gun equipped with a thermionic cathode made of a single-crystal CeB6 has been used to deliver high-brightness electron beams required for XFEL operation. Recently, an upgrade plan for SACLA based on electron-source technologies was proposed. This plan emphasizes not only upgrading the repetition rate but also improving XFEL light quality. The strategy and progress toward developing an ultimate thermionic electron gun for the SACLA upgrade are described in this paper.
- Open Access
- 22 May 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-13
Nonthermal acceleration of protein hydration by sub-terahertz irradiation
The collective intermolecular dynamics of protein and water molecules, which overlap in the sub-terahertz (THz) frequency region, are relevant for expressing protein functions but remain largely unknown. This study used dielectric relaxation (DR) measurements to investigate how externally applied sub-THz electromagnetic fields perturb the rapid collective dynamics and influence the considerably slower chemical processes in protein–water systems. We analyzed an aqueous lysozyme solution, whose hydration is not thermally equilibrated. By detecting time-lapse differences in microwave DR, we demonstrated that sub-THz irradiation gradually decreases the dielectric permittivity of the lysozyme solution by reducing the orientational polarization of water molecules. Comprehensive analysis combining THz and nuclear magnetic resonance spectroscopies suggested that the gradual decrease in the dielectric permittivity is not induced by heating but is due to a slow shift toward the hydrophobic hydration structure in lysozyme. Our findings can be used to investigate hydration-mediated protein functions based on sub-THz irradiation.
- 22 May 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-13
Open AccessNonthermal acceleration of protein hydration by sub-terahertz irradiation
The collective intermolecular dynamics of protein and water molecules, which overlap in the sub-terahertz (THz) frequency region, are relevant for expressing protein functions but remain largely unknown. This study used dielectric relaxation (DR) measurements to investigate how externally applied sub-THz electromagnetic fields perturb the rapid collective dynamics and influence the considerably slower chemical processes in protein–water systems. We analyzed an aqueous lysozyme solution, whose hydration is not thermally equilibrated. By detecting time-lapse differences in microwave DR, we demonstrated that sub-THz irradiation gradually decreases the dielectric permittivity of the lysozyme solution by reducing the orientational polarization of water molecules. Comprehensive analysis combining THz and nuclear magnetic resonance spectroscopies suggested that the gradual decrease in the dielectric permittivity is not induced by heating but is due to a slow shift toward the hydrophobic hydration structure in lysozyme. Our findings can be used to investigate hydration-mediated protein functions based on sub-THz irradiation.
- Open Access
- 12 February 2021
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 24 (2) , 022001
Multipactor suppression in dielectric-assist accelerating structures via diamondlike carbon coatings
A dielectric-assist accelerating (DAA) cavity is a standing-wave accelerating cavity that attains a Q-value of over 100,000 at room temperature by using the reflection of the dielectric layer; the DAA cavity is expected to be used with a small rf power source and high-duty operation. Thus far, the maximum accelerating field of DAA cavities has been limited to a few MV/m by the multipactor discharges. Multipactor discharges are widely observed in the accelerator field, and their suppression has been studied to improve accelerator performance. By applying a diamondlike carbon (DLC) coating to reduce the secondary electron emission coefficient without sacrificing the Q-value of the cavity, we have demonstrated that a C-band rf pulse with a pulse length of can be injected into a DAA cavity with a field of more than 10 [MV/m] while suppressing the multipactor discharges.- 12 February 2021
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 24 (2) , 022001
Open AccessMultipactor suppression in dielectric-assist accelerating structures via diamondlike carbon coatings
A dielectric-assist accelerating (DAA) cavity is a standing-wave accelerating cavity that attains a Q-value of over 100,000 at room temperature by using the reflection of the dielectric layer; the DAA cavity is expected to be used with a small rf power source and high-duty operation. Thus far, the maximum accelerating field of DAA cavities has been limited to a few MV/m by the multipactor discharges. Multipactor discharges are widely observed in the accelerator field, and their suppression has been studied to improve accelerator performance. By applying a diamondlike carbon (DLC) coating to reduce the secondary electron emission coefficient without sacrificing the Q-value of the cavity, we have demonstrated that a C-band rf pulse with a pulse length of can be injected into a DAA cavity with a field of more than 10 [MV/m] while suppressing the multipactor discharges. - 18 November 2020
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 59 (12) , 122004
Ablation threshold and crater morphology of amorphous and crystalline SiO 2 glass for extreme ultraviolet femtosecond pulses
The ablation threshold fluence and crater morphology of amorphous and crystalline SiO 2 glass were analyzed in the regime of an extreme ultraviolet femtosecond pulse. Despite the difference between the densities (or optical penetration depths) of amorphous and crystalline SiO 2 glass, the ablation threshold fluences and crater morphologies were found to be comparable. In addition, we compared our experimental results at a 10.3 nm wavelength with those in a previous work at a 13.5 nm wavelength. We conclude that the impact of the difference in density or optical penetration depth of several tens of percent on the ablation process is limited.
- 18 November 2020
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 59 (12) , 122004
Ablation threshold and crater morphology of amorphous and crystalline SiO 2 glass for extreme ultraviolet femtosecond pulses
The ablation threshold fluence and crater morphology of amorphous and crystalline SiO 2 glass were analyzed in the regime of an extreme ultraviolet femtosecond pulse. Despite the difference between the densities (or optical penetration depths) of amorphous and crystalline SiO 2 glass, the ablation threshold fluences and crater morphologies were found to be comparable. In addition, we compared our experimental results at a 10.3 nm wavelength with those in a previous work at a 13.5 nm wavelength. We conclude that the impact of the difference in density or optical penetration depth of several tens of percent on the ablation process is limited.
- 18 September 2020
- Published by Springer Nature in Applied Physics A
- Vol. 126 (10) , 1-8
Ultrafast pump-probe microscopic imaging of femtosecond laser-induced melting and ablation in single-crystalline silicon carbide
- 18 September 2020
- Published by Springer Nature in Applied Physics A
- Vol. 126 (10) , 1-8
Ultrafast pump-probe microscopic imaging of femtosecond laser-induced melting and ablation in single-crystalline silicon carbide
- 3 June 2020
- Published by Wiley in Surface and Interface Analysis
- Vol. 52 (12) , 1145-1149
Ablation thresholds and morphological changes of poly‐ l ‐lactic acid for pulse durations in the femtosecond‐to‐picosecond regime
Biodegradable polymers such as poly‐ l ‐lactic acid (PLLA) are essential tools for a wide range of medical applications because of their mechanical robustness and bio‐affinity. Laser processing is commonly used to construct various structures from biodegradable polymers. However, in general, polymers deteriorate rapidly owing to laser‐induced heating effects. In this study, we investigate the optimum irradiation conditions for PLLA processing, using an ultrafast laser and finely controlling the pulse duration over the femtosecond‐to‐picosecond range. We report on the morphological characteristics of the craters generated by single‐shot and multiple‐shot laser irradiation under pulse duration control. Our results show that crater morphology and damage threshold in the single‐shot regime depend on pulse duration and that the degree of crater unevenness is insensitive to pulse duration in the multishot regime.
- 3 June 2020
- Published by Wiley in Surface and Interface Analysis
- Vol. 52 (12) , 1145-1149
Ablation thresholds and morphological changes of poly‐ l ‐lactic acid for pulse durations in the femtosecond‐to‐picosecond regime
Biodegradable polymers such as poly‐ l ‐lactic acid (PLLA) are essential tools for a wide range of medical applications because of their mechanical robustness and bio‐affinity. Laser processing is commonly used to construct various structures from biodegradable polymers. However, in general, polymers deteriorate rapidly owing to laser‐induced heating effects. In this study, we investigate the optimum irradiation conditions for PLLA processing, using an ultrafast laser and finely controlling the pulse duration over the femtosecond‐to‐picosecond range. We report on the morphological characteristics of the craters generated by single‐shot and multiple‐shot laser irradiation under pulse duration control. Our results show that crater morphology and damage threshold in the single‐shot regime depend on pulse duration and that the degree of crater unevenness is insensitive to pulse duration in the multishot regime.
- 1 January 2020
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 462, 32-37
In situ annealing of photocathodes using backside electron-beam irradiation
- 1 January 2020
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 462, 32-37
In situ annealing of photocathodes using backside electron-beam irradiation
- 1 November 2019
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 459, 148-152
Power efficiency enhancement of dielectric assist accelerating structure
- 1 November 2019
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 459, 148-152
Power efficiency enhancement of dielectric assist accelerating structure
- 18 June 2019
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 58 (SI) , SIIB10
Characterization of binary Ce–Ir alloy photocathodes
Binary Ce–Ir alloys nominally containing 83, 78, 75, and 67 at% Ir were grown via arc melting in order to clarify the optimum composition for a Ce–Ir system to be used as photocathode material. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) analysis were employed to characterize the microstructure and phase composition of these alloys. The results of the XRD analyses and SEM/EDX measurements indicated that single-phase homogeneous crystals composed of CeIr 2 grains were successfully grown in the sample with an iridium content amounting to 67 at%. Through quantum efficiency (QE) measurements, it was revealed that the QE of the Ce-67 at% Ir alloy (CeIr 2 phase) is a few times higher than that of the other Ce–Ir alloys.
- 18 June 2019
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 58 (SI) , SIIB10
Characterization of binary Ce–Ir alloy photocathodes
Binary Ce–Ir alloys nominally containing 83, 78, 75, and 67 at% Ir were grown via arc melting in order to clarify the optimum composition for a Ce–Ir system to be used as photocathode material. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) analysis were employed to characterize the microstructure and phase composition of these alloys. The results of the XRD analyses and SEM/EDX measurements indicated that single-phase homogeneous crystals composed of CeIr 2 grains were successfully grown in the sample with an iridium content amounting to 67 at%. Through quantum efficiency (QE) measurements, it was revealed that the QE of the Ce-67 at% Ir alloy (CeIr 2 phase) is a few times higher than that of the other Ce–Ir alloys.