Thanatheepan Balachandran
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Thanatheepan Balachandran has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Kiruba Sivasubramaniam Haran
Department of Electrical and Computer Engineering, University of Illinois Urbana-Champaign, Urbana, IL, USA
15 shared publications - Jianqiao Xiao
Hinetics, Inc., Champaign, IL, USA
8 shared publications - Dongsu Lee
Hinetics LLC, Champaign, IL, USA
5 shared publications - Noah Salk
Hinetics LLC, Champaign, IL, USA
5 shared publications - Samith Sirimanna
Department of Electrical and Computer Engineering, University of Illinois at UrbanaChampaign, Urbana, IL, USA
4 shared publications Himalaya Rautela
Department of Electrical and Computer Engineering, University of Illinois Urbana-Champaign, Champaign, IL, USA
2 shared publications
Latest Publications
- 13 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Superconducting Rotor With Closed-Loop Rotor-Mounted-Cryocooler: Design, Analysis, Assembly Procedure, and Experimental Results
Hinetics is developing a megawatt-scale superconducting motor for high power density applications such as electric aviation propulsion, marine propulsion, and remote data center power generation. To de-risk the full-scale system, a scaled-down demonstrator rotor nicknamed Baby Yoda was designed, built, and tested. This prototype features no-insulation high-temperature superconducting (HTS) coils on the rotor and a conventional stator. The rotor is cryogenically cooled using an onboard closed-loop cryocooler. The superconducting rotor was retrofitted onto a commercial induction motor frame to enable rapid system integration and testing. Two test campaigns were conducted: (1) system-level performance testing and (2) extended operation for reliability assessment. Both campaigns were successfully completed, demonstrating stable operation and validating key design and integration risks for the full-scale system. This paper presents the design methodology, analytical approach, assembly process, and experimental results of the risk-reduction motor.
- 13 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Superconducting Rotor With Closed-Loop Rotor-Mounted-Cryocooler: Design, Analysis, Assembly Procedure, and Experimental Results
Hinetics is developing a megawatt-scale superconducting motor for high power density applications such as electric aviation propulsion, marine propulsion, and remote data center power generation. To de-risk the full-scale system, a scaled-down demonstrator rotor nicknamed Baby Yoda was designed, built, and tested. This prototype features no-insulation high-temperature superconducting (HTS) coils on the rotor and a conventional stator. The rotor is cryogenically cooled using an onboard closed-loop cryocooler. The superconducting rotor was retrofitted onto a commercial induction motor frame to enable rapid system integration and testing. Two test campaigns were conducted: (1) system-level performance testing and (2) extended operation for reliability assessment. Both campaigns were successfully completed, demonstrating stable operation and validating key design and integration risks for the full-scale system. This paper presents the design methodology, analytical approach, assembly process, and experimental results of the risk-reduction motor.
- 9 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Dynamic Analysis and Validation of Superconducting Rotor With a Spoke Suspension Torque Tube
A superconducting rotor with a spoke suspension system can achieve a high specific power of 40 kW/kg. The spokes act as a torque tube with strong thermal insulation, virtually eliminating the conductive heat transfer between the ambient-temperature drive shaft and the cryogenic rotor shell, where superconducting coils are mounted. However, since the spoke geometries differ from a solid torque tube, existing rotordynamic analytical models are not directly applicable. This article presents an analytical model for the dynamic behavior of the spoke system, validated through finite element (FE) analysis and experimental impact testing. The study is conducted through three aspects: analytical derivation of the spoke system resonant frequencies, 3-D FE modal verification using Comsol, and experimental validation through a ping test. The first six mode shapes and modal frequencies show minimal discrepancies among these methods. The calibrated FE model is then used to generate a Campbell diagram for rotordynamic analysis. This study provides a useful calibrated tool for predicting the dynamic behavior of the suspension system.
- 9 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Dynamic Analysis and Validation of Superconducting Rotor With a Spoke Suspension Torque Tube
A superconducting rotor with a spoke suspension system can achieve a high specific power of 40 kW/kg. The spokes act as a torque tube with strong thermal insulation, virtually eliminating the conductive heat transfer between the ambient-temperature drive shaft and the cryogenic rotor shell, where superconducting coils are mounted. However, since the spoke geometries differ from a solid torque tube, existing rotordynamic analytical models are not directly applicable. This article presents an analytical model for the dynamic behavior of the spoke system, validated through finite element (FE) analysis and experimental impact testing. The study is conducted through three aspects: analytical derivation of the spoke system resonant frequencies, 3-D FE modal verification using Comsol, and experimental validation through a ping test. The first six mode shapes and modal frequencies show minimal discrepancies among these methods. The calibrated FE model is then used to generate a Campbell diagram for rotordynamic analysis. This study provides a useful calibrated tool for predicting the dynamic behavior of the suspension system.
- Open Access
- 3 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Advancements in Superconducting Electric Propulsion: Comparative Analysis and Progress Update of CHEETA and CRUISE Motors
This paper summarizes the efforts in developing the world's most power-dense and efficient electric aircraft propulsion motor through the synergistic CHEETA (Center for High-Efficiency Electrical Technologies for Aircraft) and CRUISE (CRyogen-free Ultra-hIgh field Superconducting Electric motor) projects. The partially superconducting (SC) motor being developed under the CRUISE program features an inrunner rotor with an embedded cryocooler and high-temperature superconducting (HTS) field windings, and a slotless stator armature composed of room-temperature conductors. The CHEETA machine has the same high-level features as CRUISE, however, the armature is also cryogenically cooled to achieve the highest possible efficiency and power density. To close the machine design, four key challenges were addressed: (1) integrate a compact and rotationally-compatible cryocooler into the shaft bore with enough heat lift to cool the HTS coils to sub-50 K; (2) design a rotor cryogenic thermal management system (TMS) that minimizes the heat load to the cryocooler's cold head while simultaneously transferring torque; (3) develop robust, conduction-cooled and quench tolerant HTS magnets; (4) construct an air-core armature that maximizes electrical loading and exhibits low ac losses. In the case of CRUISE, successfully overcoming these challenges resulted in a 10 MW design that achieves 40 kW/kg continuous specific power (127 Nm/kg specific torque) and 99.4% efficiency.
- 3 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Open AccessAdvancements in Superconducting Electric Propulsion: Comparative Analysis and Progress Update of CHEETA and CRUISE Motors
This paper summarizes the efforts in developing the world's most power-dense and efficient electric aircraft propulsion motor through the synergistic CHEETA (Center for High-Efficiency Electrical Technologies for Aircraft) and CRUISE (CRyogen-free Ultra-hIgh field Superconducting Electric motor) projects. The partially superconducting (SC) motor being developed under the CRUISE program features an inrunner rotor with an embedded cryocooler and high-temperature superconducting (HTS) field windings, and a slotless stator armature composed of room-temperature conductors. The CHEETA machine has the same high-level features as CRUISE, however, the armature is also cryogenically cooled to achieve the highest possible efficiency and power density. To close the machine design, four key challenges were addressed: (1) integrate a compact and rotationally-compatible cryocooler into the shaft bore with enough heat lift to cool the HTS coils to sub-50 K; (2) design a rotor cryogenic thermal management system (TMS) that minimizes the heat load to the cryocooler's cold head while simultaneously transferring torque; (3) develop robust, conduction-cooled and quench tolerant HTS magnets; (4) construct an air-core armature that maximizes electrical loading and exhibits low ac losses. In the case of CRUISE, successfully overcoming these challenges resulted in a 10 MW design that achieves 40 kW/kg continuous specific power (127 Nm/kg specific torque) and 99.4% efficiency.
- Open Access
- 27 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-6
Designing and Commissioning an Experimental Setup to Evaluate AC Losses in Superconductors Under Transverse Rotating Fields
The development of low AC loss MgB 2 conductors and the increasing interest in a liquid hydrogen-based economy have reignited research into high power density fully superconducting (SC) electrical machines. In these machines, the armature winding experiences rotating fields that generate AC losses, making it essential to estimate these losses during machine design. While analytical and finite element analysis (FEA) models are available in the literature for estimating AC losses, these models for multi-filament MgB 2 superconductors have yet to be experimentally validated for machine operating regions. This article presents a high-precision AC-loss test setup to measure AC losses in SC MgB 2 windings under rotating fields at the air-gap field, frequency, and operating temperature levels relevant to electrical machine applications. The experimentally measured AC losses are then compared with analytical and FEA models. Results demonstrate good agreement between measurements and predictions. The paper discusses the experimental setup, sample preparation, calibration, measurement method, and results. The study provides a significant contribution to the development of high power density fully SC electrical machines.
- 27 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-6
Open AccessDesigning and Commissioning an Experimental Setup to Evaluate AC Losses in Superconductors Under Transverse Rotating Fields
The development of low AC loss MgB 2 conductors and the increasing interest in a liquid hydrogen-based economy have reignited research into high power density fully superconducting (SC) electrical machines. In these machines, the armature winding experiences rotating fields that generate AC losses, making it essential to estimate these losses during machine design. While analytical and finite element analysis (FEA) models are available in the literature for estimating AC losses, these models for multi-filament MgB 2 superconductors have yet to be experimentally validated for machine operating regions. This article presents a high-precision AC-loss test setup to measure AC losses in SC MgB 2 windings under rotating fields at the air-gap field, frequency, and operating temperature levels relevant to electrical machine applications. The experimentally measured AC losses are then compared with analytical and FEA models. Results demonstrate good agreement between measurements and predictions. The paper discusses the experimental setup, sample preparation, calibration, measurement method, and results. The study provides a significant contribution to the development of high power density fully SC electrical machines.
- Open Access
- 8 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-7
Instantaneous Loss Integration Method to Estimate AC Losses in Superconductors With Spatial and Time Harmonics
Estimating AC loss is an essential step in designing fully superconducting (SC) machines, which typically involves using analytical and Finite Element Analysis (FEA) models. Established analytical models are available for stationary sinusoidal and uniform rotating fields. But, the fully SC armature winding experiences a non-uniform rotating magnetic field that can result in varying losses. In this paper, we propose extended analytical methods to estimate AC losses in non-uniform rotating magnetic fields. Our proposed methods can refine the AC loss estimation process and improve the subsequent cryogenic load design. The significant advantage of our proposed method is the ability to capture the impact of AC losses due to varying field magnitude within a single cycle. We estimate losses for various scenarios and compare them to FEA analysis results to verify the accuracy of our model. We then experimentally validate the FEA models used in the analysis for uniformly rotating fields, which establishes the feasibility of our proposed models.
- 8 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-7
Open AccessInstantaneous Loss Integration Method to Estimate AC Losses in Superconductors With Spatial and Time Harmonics
Estimating AC loss is an essential step in designing fully superconducting (SC) machines, which typically involves using analytical and Finite Element Analysis (FEA) models. Established analytical models are available for stationary sinusoidal and uniform rotating fields. But, the fully SC armature winding experiences a non-uniform rotating magnetic field that can result in varying losses. In this paper, we propose extended analytical methods to estimate AC losses in non-uniform rotating magnetic fields. Our proposed methods can refine the AC loss estimation process and improve the subsequent cryogenic load design. The significant advantage of our proposed method is the ability to capture the impact of AC losses due to varying field magnitude within a single cycle. We estimate losses for various scenarios and compare them to FEA analysis results to verify the accuracy of our model. We then experimentally validate the FEA models used in the analysis for uniformly rotating fields, which establishes the feasibility of our proposed models.
- 19 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (2) , 1719-1727
Detailed Design and Prototyping of a High Power Density Slotless PMSM
This paper describes the detailed design and development of a 300 kW permanent magnet (PM) synchronous motor for electric aircraft propulsion, taking into consideration manufacturability, balancing ease, and cost of high-volume production with motor performance. The motor consists of a slotless stator structure with custom litz wire and an outer rotor with a Halbach PM array. The design of the proposed motor is based on multi-physics performance including electromagnetic field, thermal and mechanical analysis. For ease of manufacturing and economies of scale, the detailed design is refined by altering the PM segment number, PM shape and litz wire construction. The impacts of changing these parameters are evaluated in detail using analytical and finite element methods. The simulation results are compared with experimental results in terms of torque production, back electromotive force, and current level.
- 19 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (2) , 1719-1727
Detailed Design and Prototyping of a High Power Density Slotless PMSM
This paper describes the detailed design and development of a 300 kW permanent magnet (PM) synchronous motor for electric aircraft propulsion, taking into consideration manufacturability, balancing ease, and cost of high-volume production with motor performance. The motor consists of a slotless stator structure with custom litz wire and an outer rotor with a Halbach PM array. The design of the proposed motor is based on multi-physics performance including electromagnetic field, thermal and mechanical analysis. For ease of manufacturing and economies of scale, the detailed design is refined by altering the PM segment number, PM shape and litz wire construction. The impacts of changing these parameters are evaluated in detail using analytical and finite element methods. The simulation results are compared with experimental results in terms of torque production, back electromotive force, and current level.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 9 (3) , 3579-3589
Fan and Motor Co-Optimization for a Distributed Electric Aircraft Propulsion System
An integrated modeling approach is presented for the conceptual design of electric aircraft propulsors, with application to NASA’s hydrogen fuel-cell powered transport aircraft concept, being developed under the CHEETA (Center for High-Efficiency Electrical Technologies for Aircraft) program. The distributed boundary layer ingesting (BLI) fan module and the fan-hub embedded MgB2 based fully superconducting (SC) electric motors are modeled together using Signomial Programming (SP). An all-at-once SP optimization eliminates external design iterations between modules and provides sensitivities to design parameters as part of the optimization solution. In addition, the approach developed here is modular and component models can be easily added to study various aircraft architectures. A trade space exploration of CHEETA propulsors indicates a highly-distributed 32 wing and fuselage mounted propulsors configuration, powered by 0.5 MW and 1.6 MW motors, respectively, as the optimal, yielding 16% reduction in the aircraft electric energy consumption relative to a conventional twin electric under-wing propulsors design. However, the design selected is a 9 propulsors configuration with 2.4 MW motors (power range more suitable for fully SC architecture), with about 14% power savings. The fan-embedded motor architecture leads to fan hub-to-tip ratios of up to 0.5, which are higher than typical.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 9 (3) , 3579-3589
Fan and Motor Co-Optimization for a Distributed Electric Aircraft Propulsion System
An integrated modeling approach is presented for the conceptual design of electric aircraft propulsors, with application to NASA’s hydrogen fuel-cell powered transport aircraft concept, being developed under the CHEETA (Center for High-Efficiency Electrical Technologies for Aircraft) program. The distributed boundary layer ingesting (BLI) fan module and the fan-hub embedded MgB2 based fully superconducting (SC) electric motors are modeled together using Signomial Programming (SP). An all-at-once SP optimization eliminates external design iterations between modules and provides sensitivities to design parameters as part of the optimization solution. In addition, the approach developed here is modular and component models can be easily added to study various aircraft architectures. A trade space exploration of CHEETA propulsors indicates a highly-distributed 32 wing and fuselage mounted propulsors configuration, powered by 0.5 MW and 1.6 MW motors, respectively, as the optimal, yielding 16% reduction in the aircraft electric energy consumption relative to a conventional twin electric under-wing propulsors design. However, the design selected is a 9 propulsors configuration with 2.4 MW motors (power range more suitable for fully SC architecture), with about 14% power savings. The fan-embedded motor architecture leads to fan hub-to-tip ratios of up to 0.5, which are higher than typical.
- Open Access
A Review on Magnet Loss Analysis, Validation, Design Considerations, and Reduction Strategies in Permanent Magnet Synchronous Motors
Eddy current losses in magnets are a major consideration in the rotor design of permanent magnet synchronous motors (PMSMs). Stator design choices and the use of modern inverters with high switching frequency introduce harmonics that can contribute to significant losses in the magnets, causing the rotor to heat up. In typical PMSMs, the lack of rotor cooling can cause the magnet’s performance to degrade at high temperatures and eventually demagnetize. This review examines a large number of studies analyzing magnet eddy current losses using analytical methods and finite-element analysis. In some of these studies, magnet segmentation is carried out to reduce the losses; however, their loss-reduction effects depend highly on the type of PMSM and the mix of stator harmonics. Magnet segmentation without considering these effects can, in fact, increase the magnet losses, in addition to the extra manufacturing efforts. Multiple design analysis show the influence of rotor–stator geometric features on magnet losses. Although measuring magnet eddy current losses for these motor designs is a tedious task, authors have proposed calorimetric and loss segregation-based techniques to provide validation. This paper addresses magnet loss modeling techniques, PM material considerations, magnet segmentation effectiveness, motor and stator design effects, and experimental validation to inform motor designers about the costs and benefits of rotor designs that minimize rotor losses.
Open AccessA Review on Magnet Loss Analysis, Validation, Design Considerations, and Reduction Strategies in Permanent Magnet Synchronous Motors
Eddy current losses in magnets are a major consideration in the rotor design of permanent magnet synchronous motors (PMSMs). Stator design choices and the use of modern inverters with high switching frequency introduce harmonics that can contribute to significant losses in the magnets, causing the rotor to heat up. In typical PMSMs, the lack of rotor cooling can cause the magnet’s performance to degrade at high temperatures and eventually demagnetize. This review examines a large number of studies analyzing magnet eddy current losses using analytical methods and finite-element analysis. In some of these studies, magnet segmentation is carried out to reduce the losses; however, their loss-reduction effects depend highly on the type of PMSM and the mix of stator harmonics. Magnet segmentation without considering these effects can, in fact, increase the magnet losses, in addition to the extra manufacturing efforts. Multiple design analysis show the influence of rotor–stator geometric features on magnet losses. Although measuring magnet eddy current losses for these motor designs is a tedious task, authors have proposed calorimetric and loss segregation-based techniques to provide validation. This paper addresses magnet loss modeling techniques, PM material considerations, magnet segmentation effectiveness, motor and stator design effects, and experimental validation to inform motor designers about the costs and benefits of rotor designs that minimize rotor losses.
- Open Access
- 15 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 32 (6) , 1-7
Methods of Estimating AC Losses in Superconducting MgB$_{2}$ Armature Windings With Spatial and Time Harmonics
Recent developments in low ac loss MgB $_{2}$ conductors are of significant importance given renewed interest in fully superconducting (SC) machines. Evaluating ac losses in fully SC machines is a critical step in developing feasible designs. In fully SC machines, SC armature windings experience non-uniform rotating magnetic fields, with spatial and temporal harmonics, which has an undisputed impact on ac losses. Existing ac loss models in the literature, which have been validated for stationary sinusoidal external fields, were extended to constant amplitude rotating fields. There is not enough research on validating the ac loss models for rotating non-uniform magnetic fields with harmonics. This paper proposes simplified methods to estimate the ac losses in conductors with non-uniform rotational applied magnetic fields experienced by the armature in a machine’s environment. Extended analytical models are proposed to estimate the ac loss in single and multi-filament MgB $_{2}$ conductors. The models are then compared against finite element analysis (FEA) results with Power Law loss estimation to evaluate model fidelity.
- 15 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 32 (6) , 1-7
Open AccessMethods of Estimating AC Losses in Superconducting MgB$_{2}$ Armature Windings With Spatial and Time Harmonics
Recent developments in low ac loss MgB $_{2}$ conductors are of significant importance given renewed interest in fully superconducting (SC) machines. Evaluating ac losses in fully SC machines is a critical step in developing feasible designs. In fully SC machines, SC armature windings experience non-uniform rotating magnetic fields, with spatial and temporal harmonics, which has an undisputed impact on ac losses. Existing ac loss models in the literature, which have been validated for stationary sinusoidal external fields, were extended to constant amplitude rotating fields. There is not enough research on validating the ac loss models for rotating non-uniform magnetic fields with harmonics. This paper proposes simplified methods to estimate the ac losses in conductors with non-uniform rotational applied magnetic fields experienced by the armature in a machine’s environment. Extended analytical models are proposed to estimate the ac loss in single and multi-filament MgB $_{2}$ conductors. The models are then compared against finite element analysis (FEA) results with Power Law loss estimation to evaluate model fidelity.
- 10 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (8) , 1-5
A Spoke-Supported Superconducting Rotor With Rotating Cryocooler
This article presents the design of a superconducting (SC) rotor with a spoke supported structure that minimizes the heat loss and enables the motor to be cooled by one cryocooler. The main challenge with the SC machines is the need to maintain the SC coils at cryogenic temperatures. Though usually placed in the vacuum, the cryogenic coils still receive a large amount of heat through the conduction of the torque tube which connects to the ambient temperature. The heat flown into the system exceeds the cooling capacity of a cryocooler and requires the boiling of cryogen, which comes with a more complicated and bulky hardware system. The SC rotor proposed in this article uses a spoke system to support the cryogenic windings. Connecting the windings to the shaft, the flexible spokes with low thermal conductivities transfer the torque from the windings to the shaft. The spoke system has much lower thermal conductivity than a traditional torque tube. Preliminary results show that with the ambient temperature 298 K and the cryogenic temperature at 40 K, the total heat transfer rate from the ambient environment to the cryogenic environment is less than 0.1 W, within the capability of a cryocooler that can be mounted on the rotor. The cryocooler is arranged concentrically with the shaft of the rotor. Thermal straps connecting the cold end of the cryocooler to the windings to conduct the heat. An analytical model is built for the rotor. The rotor’s mechanical property and its thermal behavior are analyzed jointly so that the spoke system is optimized for high stress and lightweight. A physical model is also built to test the cryocooler performance in the rotational environment. A previous study shows that the sterling-cycle cryocooler performance has not deteriorated at 1800 rpm at the temperature of 100 K. The proposed design involves a lower operating temperature at 40 K and a high vacuum environment surrounding the cold head.
- 10 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (8) , 1-5
A Spoke-Supported Superconducting Rotor With Rotating Cryocooler
This article presents the design of a superconducting (SC) rotor with a spoke supported structure that minimizes the heat loss and enables the motor to be cooled by one cryocooler. The main challenge with the SC machines is the need to maintain the SC coils at cryogenic temperatures. Though usually placed in the vacuum, the cryogenic coils still receive a large amount of heat through the conduction of the torque tube which connects to the ambient temperature. The heat flown into the system exceeds the cooling capacity of a cryocooler and requires the boiling of cryogen, which comes with a more complicated and bulky hardware system. The SC rotor proposed in this article uses a spoke system to support the cryogenic windings. Connecting the windings to the shaft, the flexible spokes with low thermal conductivities transfer the torque from the windings to the shaft. The spoke system has much lower thermal conductivity than a traditional torque tube. Preliminary results show that with the ambient temperature 298 K and the cryogenic temperature at 40 K, the total heat transfer rate from the ambient environment to the cryogenic environment is less than 0.1 W, within the capability of a cryocooler that can be mounted on the rotor. The cryocooler is arranged concentrically with the shaft of the rotor. Thermal straps connecting the cold end of the cryocooler to the windings to conduct the heat. An analytical model is built for the rotor. The rotor’s mechanical property and its thermal behavior are analyzed jointly so that the spoke system is optimized for high stress and lightweight. A physical model is also built to test the cryocooler performance in the rotational environment. A previous study shows that the sterling-cycle cryocooler performance has not deteriorated at 1800 rpm at the temperature of 100 K. The proposed design involves a lower operating temperature at 40 K and a high vacuum environment surrounding the cold head.