Noah Salk
Research Subjects
Noah Salk has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Kiruba Sivasubramaniam Haran
Department of Electrical and Computer Engineering, University of Illinois Urbana-Champaign, Urbana, IL, USA
5 shared publications - Thanatheepan Balachandran
Department of Electrical and Computer Engineering, University of Illinois Urbana-Champaign, Urbana, IL, USA
5 shared publications - Dongsu Lee
Hinetics LLC, Champaign, IL, USA
3 shared publications - Jianqiao Xiao
Hinetics, Inc., Champaign, IL, USA
3 shared publications Chathan Cooke
2 shared publicationsPhoenix Bauer
Hinetics, Inc., Champaign, IL, USA
2 shared publications
Latest Publications
- 13 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Superconducting Rotor With Closed-Loop Rotor-Mounted-Cryocooler: Design, Analysis, Assembly Procedure, and Experimental Results
Hinetics is developing a megawatt-scale superconducting motor for high power density applications such as electric aviation propulsion, marine propulsion, and remote data center power generation. To de-risk the full-scale system, a scaled-down demonstrator rotor nicknamed Baby Yoda was designed, built, and tested. This prototype features no-insulation high-temperature superconducting (HTS) coils on the rotor and a conventional stator. The rotor is cryogenically cooled using an onboard closed-loop cryocooler. The superconducting rotor was retrofitted onto a commercial induction motor frame to enable rapid system integration and testing. Two test campaigns were conducted: (1) system-level performance testing and (2) extended operation for reliability assessment. Both campaigns were successfully completed, demonstrating stable operation and validating key design and integration risks for the full-scale system. This paper presents the design methodology, analytical approach, assembly process, and experimental results of the risk-reduction motor.
- 13 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Superconducting Rotor With Closed-Loop Rotor-Mounted-Cryocooler: Design, Analysis, Assembly Procedure, and Experimental Results
Hinetics is developing a megawatt-scale superconducting motor for high power density applications such as electric aviation propulsion, marine propulsion, and remote data center power generation. To de-risk the full-scale system, a scaled-down demonstrator rotor nicknamed Baby Yoda was designed, built, and tested. This prototype features no-insulation high-temperature superconducting (HTS) coils on the rotor and a conventional stator. The rotor is cryogenically cooled using an onboard closed-loop cryocooler. The superconducting rotor was retrofitted onto a commercial induction motor frame to enable rapid system integration and testing. Two test campaigns were conducted: (1) system-level performance testing and (2) extended operation for reliability assessment. Both campaigns were successfully completed, demonstrating stable operation and validating key design and integration risks for the full-scale system. This paper presents the design methodology, analytical approach, assembly process, and experimental results of the risk-reduction motor.
- Open Access
- 3 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Advancements in Superconducting Electric Propulsion: Comparative Analysis and Progress Update of CHEETA and CRUISE Motors
This paper summarizes the efforts in developing the world's most power-dense and efficient electric aircraft propulsion motor through the synergistic CHEETA (Center for High-Efficiency Electrical Technologies for Aircraft) and CRUISE (CRyogen-free Ultra-hIgh field Superconducting Electric motor) projects. The partially superconducting (SC) motor being developed under the CRUISE program features an inrunner rotor with an embedded cryocooler and high-temperature superconducting (HTS) field windings, and a slotless stator armature composed of room-temperature conductors. The CHEETA machine has the same high-level features as CRUISE, however, the armature is also cryogenically cooled to achieve the highest possible efficiency and power density. To close the machine design, four key challenges were addressed: (1) integrate a compact and rotationally-compatible cryocooler into the shaft bore with enough heat lift to cool the HTS coils to sub-50 K; (2) design a rotor cryogenic thermal management system (TMS) that minimizes the heat load to the cryocooler's cold head while simultaneously transferring torque; (3) develop robust, conduction-cooled and quench tolerant HTS magnets; (4) construct an air-core armature that maximizes electrical loading and exhibits low ac losses. In the case of CRUISE, successfully overcoming these challenges resulted in a 10 MW design that achieves 40 kW/kg continuous specific power (127 Nm/kg specific torque) and 99.4% efficiency.
- 3 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Open AccessAdvancements in Superconducting Electric Propulsion: Comparative Analysis and Progress Update of CHEETA and CRUISE Motors
This paper summarizes the efforts in developing the world's most power-dense and efficient electric aircraft propulsion motor through the synergistic CHEETA (Center for High-Efficiency Electrical Technologies for Aircraft) and CRUISE (CRyogen-free Ultra-hIgh field Superconducting Electric motor) projects. The partially superconducting (SC) motor being developed under the CRUISE program features an inrunner rotor with an embedded cryocooler and high-temperature superconducting (HTS) field windings, and a slotless stator armature composed of room-temperature conductors. The CHEETA machine has the same high-level features as CRUISE, however, the armature is also cryogenically cooled to achieve the highest possible efficiency and power density. To close the machine design, four key challenges were addressed: (1) integrate a compact and rotationally-compatible cryocooler into the shaft bore with enough heat lift to cool the HTS coils to sub-50 K; (2) design a rotor cryogenic thermal management system (TMS) that minimizes the heat load to the cryocooler's cold head while simultaneously transferring torque; (3) develop robust, conduction-cooled and quench tolerant HTS magnets; (4) construct an air-core armature that maximizes electrical loading and exhibits low ac losses. In the case of CRUISE, successfully overcoming these challenges resulted in a 10 MW design that achieves 40 kW/kg continuous specific power (127 Nm/kg specific torque) and 99.4% efficiency.
- Open Access
- 12 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Current Loop Approach to Computing Losses in Coaxial Multi-phase Air-core Coil Systems
This work presents a procedural method for analytically computing losses in solid conductor air-core coils. The approach was developed for the coaxial subset of air-core coil systems in which hoop-turn, axisymmetric assumptions can be made. It encapsulates loss generally associated with magnetic diffusion, including that induced by rotating magnetic fields from multi-phase current sources, without computing the complex eddy current distribution in a conductor cross-section. Each turn in the system is replaced with an infinitesimally thin circular current loop and is independently excited according to a peak current and phase. Field contributions are summed up at each loop center, with the inclusion of phase to calculate the major and minor components of the resultant magnetic field at each turn. Well established analytic formulae are then used to compute loss accordingly. The approach is significantly faster than 2D axisymmetric finite element analysis (FEA) and greatly improves approximations for losses in isolated coils.
- 12 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessCurrent Loop Approach to Computing Losses in Coaxial Multi-phase Air-core Coil Systems
This work presents a procedural method for analytically computing losses in solid conductor air-core coils. The approach was developed for the coaxial subset of air-core coil systems in which hoop-turn, axisymmetric assumptions can be made. It encapsulates loss generally associated with magnetic diffusion, including that induced by rotating magnetic fields from multi-phase current sources, without computing the complex eddy current distribution in a conductor cross-section. Each turn in the system is replaced with an infinitesimally thin circular current loop and is independently excited according to a peak current and phase. Field contributions are summed up at each loop center, with the inclusion of phase to calculate the major and minor components of the resultant magnetic field at each turn. Well established analytic formulae are then used to compute loss accordingly. The approach is significantly faster than 2D axisymmetric finite element analysis (FEA) and greatly improves approximations for losses in isolated coils.
- 19 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (2) , 1719-1727
Detailed Design and Prototyping of a High Power Density Slotless PMSM
This paper describes the detailed design and development of a 300 kW permanent magnet (PM) synchronous motor for electric aircraft propulsion, taking into consideration manufacturability, balancing ease, and cost of high-volume production with motor performance. The motor consists of a slotless stator structure with custom litz wire and an outer rotor with a Halbach PM array. The design of the proposed motor is based on multi-physics performance including electromagnetic field, thermal and mechanical analysis. For ease of manufacturing and economies of scale, the detailed design is refined by altering the PM segment number, PM shape and litz wire construction. The impacts of changing these parameters are evaluated in detail using analytical and finite element methods. The simulation results are compared with experimental results in terms of torque production, back electromotive force, and current level.
- 19 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (2) , 1719-1727
Detailed Design and Prototyping of a High Power Density Slotless PMSM
This paper describes the detailed design and development of a 300 kW permanent magnet (PM) synchronous motor for electric aircraft propulsion, taking into consideration manufacturability, balancing ease, and cost of high-volume production with motor performance. The motor consists of a slotless stator structure with custom litz wire and an outer rotor with a Halbach PM array. The design of the proposed motor is based on multi-physics performance including electromagnetic field, thermal and mechanical analysis. For ease of manufacturing and economies of scale, the detailed design is refined by altering the PM segment number, PM shape and litz wire construction. The impacts of changing these parameters are evaluated in detail using analytical and finite element methods. The simulation results are compared with experimental results in terms of torque production, back electromotive force, and current level.
- Open Access
- 15 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 32 (6) , 1-7
Methods of Estimating AC Losses in Superconducting MgB$_{2}$ Armature Windings With Spatial and Time Harmonics
Recent developments in low ac loss MgB $_{2}$ conductors are of significant importance given renewed interest in fully superconducting (SC) machines. Evaluating ac losses in fully SC machines is a critical step in developing feasible designs. In fully SC machines, SC armature windings experience non-uniform rotating magnetic fields, with spatial and temporal harmonics, which has an undisputed impact on ac losses. Existing ac loss models in the literature, which have been validated for stationary sinusoidal external fields, were extended to constant amplitude rotating fields. There is not enough research on validating the ac loss models for rotating non-uniform magnetic fields with harmonics. This paper proposes simplified methods to estimate the ac losses in conductors with non-uniform rotational applied magnetic fields experienced by the armature in a machine’s environment. Extended analytical models are proposed to estimate the ac loss in single and multi-filament MgB $_{2}$ conductors. The models are then compared against finite element analysis (FEA) results with Power Law loss estimation to evaluate model fidelity.
- 15 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 32 (6) , 1-7
Open AccessMethods of Estimating AC Losses in Superconducting MgB$_{2}$ Armature Windings With Spatial and Time Harmonics
Recent developments in low ac loss MgB $_{2}$ conductors are of significant importance given renewed interest in fully superconducting (SC) machines. Evaluating ac losses in fully SC machines is a critical step in developing feasible designs. In fully SC machines, SC armature windings experience non-uniform rotating magnetic fields, with spatial and temporal harmonics, which has an undisputed impact on ac losses. Existing ac loss models in the literature, which have been validated for stationary sinusoidal external fields, were extended to constant amplitude rotating fields. There is not enough research on validating the ac loss models for rotating non-uniform magnetic fields with harmonics. This paper proposes simplified methods to estimate the ac losses in conductors with non-uniform rotational applied magnetic fields experienced by the armature in a machine’s environment. Extended analytical models are proposed to estimate the ac loss in single and multi-filament MgB $_{2}$ conductors. The models are then compared against finite element analysis (FEA) results with Power Law loss estimation to evaluate model fidelity.
- 21 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (6) , 1-8
A Versatile Simulation-Assisted Layered Mesh Analysis for Generalized Litz Wire Performance
This article introduces a semi-analytical method of predicting ac loss in commercial Litz wires. Simple finite-element simulations are used to compute the resultant proximity fields in a coil system of arbitrary geometry. The approach addresses non-ideal Litz wire construction by applying a surrogate skin effect model to inform and distribute the current over the cross Section into segmented layers. This simplifies the finite-element problem into a 2-D, dc simulation with a low number of mesh elements. Analytical solutions are then used to compute frequency-dependent loss due to skin and proximity effect. The method is demonstrated using two 14 American Wire Gauge (AWG) equivalent Litz wires with very different constructions and is validated with experimental results from several coil configurations. Finally, an appeal is made to commercial Litz wire manufacturers to provide an empirical “fabrication factor” specification that would allow consumers to predict the performance of a conductor in their application.
- 21 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (6) , 1-8
A Versatile Simulation-Assisted Layered Mesh Analysis for Generalized Litz Wire Performance
This article introduces a semi-analytical method of predicting ac loss in commercial Litz wires. Simple finite-element simulations are used to compute the resultant proximity fields in a coil system of arbitrary geometry. The approach addresses non-ideal Litz wire construction by applying a surrogate skin effect model to inform and distribute the current over the cross Section into segmented layers. This simplifies the finite-element problem into a 2-D, dc simulation with a low number of mesh elements. Analytical solutions are then used to compute frequency-dependent loss due to skin and proximity effect. The method is demonstrated using two 14 American Wire Gauge (AWG) equivalent Litz wires with very different constructions and is validated with experimental results from several coil configurations. Finally, an appeal is made to commercial Litz wire manufacturers to provide an empirical “fabrication factor” specification that would allow consumers to predict the performance of a conductor in their application.
- Open Access
- 13 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
A Versatile Simulation-Assisted Layered Mesh Analysis for Generalized Litz Wire Performance
This paper introduces a semi-analytical method of predicting AC loss in commercial Litz wires. Simple finite-element simulations are used to compute the resultant proximity fields in a coil system of arbitrary geometry. The approach addresses non-ideal Litz wire construction by applying a surrogate skin effect model to inform and distribute the current over the cross-section into segmented layers. This simplifies the finite-element problem into a two-dimensional, DC simulation with a low number of mesh elements. Analytical solutions are then used to compute frequency-dependent loss due to skin and proximity effect. The method is demonstrated using two 14 AWG equivalent Litz wires with very different constructions and is validated with experimental results from several coil configurations. Finally, an appeal is made to commercial Litz wire manufacturers to provide an empirical “fabrication factor” specification that would allow consumers to predict the performance of a conductor in their application.
- 13 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessA Versatile Simulation-Assisted Layered Mesh Analysis for Generalized Litz Wire Performance
This paper introduces a semi-analytical method of predicting AC loss in commercial Litz wires. Simple finite-element simulations are used to compute the resultant proximity fields in a coil system of arbitrary geometry. The approach addresses non-ideal Litz wire construction by applying a surrogate skin effect model to inform and distribute the current over the cross-section into segmented layers. This simplifies the finite-element problem into a two-dimensional, DC simulation with a low number of mesh elements. Analytical solutions are then used to compute frequency-dependent loss due to skin and proximity effect. The method is demonstrated using two 14 AWG equivalent Litz wires with very different constructions and is validated with experimental results from several coil configurations. Finally, an appeal is made to commercial Litz wire manufacturers to provide an empirical “fabrication factor” specification that would allow consumers to predict the performance of a conductor in their application.
- Open Access
- 1 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (4) , 1
Evaluation and Mitigation of AC Losses in a Fully Superconducting Machine for Wind Turbine Applications
A significant challenge in the design of fully superconducting (SC) machines is managing ac losses in the SC armature. Recent developments in MgB2 superconducting conductors promise low ac loss conductors suitable for fully SC machines. This paper presents an optimized design targeting low losses and low weight for a 10-MW fully SC generator suitable for offshore wind turbine applications. An outer rotor air-core machine topology is investigated to optimize the design with low weight and low losses. An active shielding concept is used to minimize the pole count without adding excessive weight. This enables a reduction in the electrical frequency for a practical design by a factor of 4 to 5 over current designs, driving ac losses and active components weight lower by an order of magnitude. In this study, armature current is varied to control electrical and magnetic loading in order to minimize losses. A pole count study is conducted to identify the design space suitable for MW scale machines. A comparison is made between active shield, passive shield and a hybrid topology to address the benefits of an active shield for weight reduction. Results suggest that low-pole-count designs with MgB2 conductors will enable machines with less than 1 kW of ac losses.
- 1 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (4) , 1
Open AccessEvaluation and Mitigation of AC Losses in a Fully Superconducting Machine for Wind Turbine Applications
A significant challenge in the design of fully superconducting (SC) machines is managing ac losses in the SC armature. Recent developments in MgB2 superconducting conductors promise low ac loss conductors suitable for fully SC machines. This paper presents an optimized design targeting low losses and low weight for a 10-MW fully SC generator suitable for offshore wind turbine applications. An outer rotor air-core machine topology is investigated to optimize the design with low weight and low losses. An active shielding concept is used to minimize the pole count without adding excessive weight. This enables a reduction in the electrical frequency for a practical design by a factor of 4 to 5 over current designs, driving ac losses and active components weight lower by an order of magnitude. In this study, armature current is varied to control electrical and magnetic loading in order to minimize losses. A pole count study is conducted to identify the design space suitable for MW scale machines. A comparison is made between active shield, passive shield and a hybrid topology to address the benefits of an active shield for weight reduction. Results suggest that low-pole-count designs with MgB2 conductors will enable machines with less than 1 kW of ac losses.