Ming-Han Li
Research Subjects
Ming-Han Li has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Young-Jae Yi
Postdoctoral Research Associate, Dept. of Landscape Architecture and Urban Planning, Texas A&M Univ., College Station, TX 77843-3735
4 shared publications - David B. Thompson
Director of Engineering, R.O. Anderson Engineering, Inc., Minden, NV 89423
2 shared publications - Jun-Hyun Kim
Department of Landscape Architecture and Urban Planning, Texas A&M University, College Station, USA
2 shared publications - Theodore G. Cleveland
Associate Professor, Dept. of Civil and Environmental Engineering, Texas Tech Univ., Lubbock, TX 79409-1023
2 shared publications - Xing Fang
Auburn Univ
2 shared publications Astrid Volder
1 shared publication
Latest Publications
- Open Access
- 31 August 2016
- Published by MDPI AG in Sustainability
- Vol. 8 (9) , 763
Sustainable Stormwater Management: Examining the Role of Local Planning Capacity in Mitigating Peak Surface Runoff
The Chesapeake Bay, the largest estuary in the United States, is rich in natural resources. Its watershed has been impacted by excessive and degraded stormwater runoff from rapid urbanization. We used an empirical approach to investigate how local planning capacity in the Chesapeake Bay watershed affected stream flow. A multiple regression analysis was employed to examine to what extent that the planning factors and other contextual variables were associated with peak runoff. Counterintuitively, we found that sub-basins included in the sample jurisdictions with a relatively high plan quality score tend to generate higher volumes of peak runoff. Results further indicate that specific geographical, basin characteristic, and biophysical factors affected mean annual peak runoff significantly. Overall, our findings highlight the importance of local planning capacity and sustainable stormwater management concepts in mitigating excessive runoff.
- 31 August 2016
- Published by MDPI AG in Sustainability
- Vol. 8 (9) , 763
Open AccessSustainable Stormwater Management: Examining the Role of Local Planning Capacity in Mitigating Peak Surface Runoff
The Chesapeake Bay, the largest estuary in the United States, is rich in natural resources. Its watershed has been impacted by excessive and degraded stormwater runoff from rapid urbanization. We used an empirical approach to investigate how local planning capacity in the Chesapeake Bay watershed affected stream flow. A multiple regression analysis was employed to examine to what extent that the planning factors and other contextual variables were associated with peak runoff. Counterintuitively, we found that sub-basins included in the sample jurisdictions with a relatively high plan quality score tend to generate higher volumes of peak runoff. Results further indicate that specific geographical, basin characteristic, and biophysical factors affected mean annual peak runoff significantly. Overall, our findings highlight the importance of local planning capacity and sustainable stormwater management concepts in mitigating excessive runoff.
- Open Access
- 8 January 2016
- Published by MDPI AG in Sustainability
- Vol. 8 (1) , 58
Utilizing the Analytic Hierarchy Process to Establish Weighted Values for Evaluating the Stability of Slope Revegetation based on Hydroseeding Applications in South Korea
The aim of this study was to identify the major variables identified as important for considering the stabilization of slope revegetation based on hydroseeding applications and evaluate weights of each variable using the analytic hierarchy process (AHP) with both environmental experts and civil engineers. Twenty-five variables were selected by the experts’ survey from a total of 65 from the existing literature, with each variable considered as an important factor for slope stabilization in South Korea. The final results from the AHP method showed that variables associated with the driving force of water resources showed higher values in all expert groups such as rain intensity, seepage water and drainage condition. Other important variables were related to plant growth such as vegetation community, vegetation coverage and quality of soil ameliorant produced in an artificial factory such as tensile strength, permeability coefficient, soil texture and organic matter. The five highest-ranked variables that satisfied both environmental experts and civil engineers were rain intensity, seepage water, slope angle, drainage condition and ground layer. The findings of this research could be helpful for developing a more accurate rating system to evaluate the stability of slope revegetation.
- 8 January 2016
- Published by MDPI AG in Sustainability
- Vol. 8 (1) , 58
Open AccessUtilizing the Analytic Hierarchy Process to Establish Weighted Values for Evaluating the Stability of Slope Revegetation based on Hydroseeding Applications in South Korea
The aim of this study was to identify the major variables identified as important for considering the stabilization of slope revegetation based on hydroseeding applications and evaluate weights of each variable using the analytic hierarchy process (AHP) with both environmental experts and civil engineers. Twenty-five variables were selected by the experts’ survey from a total of 65 from the existing literature, with each variable considered as an important factor for slope stabilization in South Korea. The final results from the AHP method showed that variables associated with the driving force of water resources showed higher values in all expert groups such as rain intensity, seepage water and drainage condition. Other important variables were related to plant growth such as vegetation community, vegetation coverage and quality of soil ameliorant produced in an artificial factory such as tensile strength, permeability coefficient, soil texture and organic matter. The five highest-ranked variables that satisfied both environmental experts and civil engineers were rain intensity, seepage water, slope angle, drainage condition and ground layer. The findings of this research could be helpful for developing a more accurate rating system to evaluate the stability of slope revegetation.
- Open Access
- 8 June 2015
- Published by MDPI AG
Low Impact Development Applications in Urban Watersheds: Efficacy Evaluation by Imperviousness Connctivity Estimations
Although recent studies have emphasized the benefits of Low Impact Development (LID), the influence of LID on impervious surface connectivity to downstream drainage has not yet been fully investigated by using quantitative measurements. Some previous studies have attempted to measure correlates between discharged stormwater volume and the directly connected impervious areas (DCIA), a fraction of the impervious area that is hydraulically connected to downstream drainage by a piped route. They found that DCIA could be a more accurate predictor of urban development impacts on stream ecosystems than is the total impervious area. This study measured the DCIA of urban watersheds in the Energy Corridor District, Houston, Texas, where rapid urbanization and increasing impervious surfaces have caused urban stream degradation during the past decades. This study primarily prioritized land use into four types based on the contribution of hypothetically implemented LID facilities to DCIA reduction for each land use. Stormwater infrastructure and impervious cover data were analyzed using Geographic Information Systems. Sutherland's equations taken from Sutherland, R.C. (1995) were utilized to compute DCIA at the parcel level. The results were 1) a greater value of current DCIA in commercial areas than in residential areas (single family houses 40%, multi-family houses 64%, big box retails 77%, scattered small-scale retails 71%); 2) a significant reduction of DCIA for all land uses after hypothetically implementing LID applications (reduction rates ranged from 6.4% to 52.2%); and 3) the greatest change of DCIA in big box retail areas with pervious pavement and vegetated swale installation. The results will contribute to determining which land use type is of higher priority in implementing source-control stormwater infrastructure and providing local governments with a better index to calculate drainage fees, which are currently imposed on property owners based on total impervious area.
- 8 June 2015
- Published by MDPI AG
Open AccessLow Impact Development Applications in Urban Watersheds: Efficacy Evaluation by Imperviousness Connctivity Estimations
Although recent studies have emphasized the benefits of Low Impact Development (LID), the influence of LID on impervious surface connectivity to downstream drainage has not yet been fully investigated by using quantitative measurements. Some previous studies have attempted to measure correlates between discharged stormwater volume and the directly connected impervious areas (DCIA), a fraction of the impervious area that is hydraulically connected to downstream drainage by a piped route. They found that DCIA could be a more accurate predictor of urban development impacts on stream ecosystems than is the total impervious area. This study measured the DCIA of urban watersheds in the Energy Corridor District, Houston, Texas, where rapid urbanization and increasing impervious surfaces have caused urban stream degradation during the past decades. This study primarily prioritized land use into four types based on the contribution of hypothetically implemented LID facilities to DCIA reduction for each land use. Stormwater infrastructure and impervious cover data were analyzed using Geographic Information Systems. Sutherland's equations taken from Sutherland, R.C. (1995) were utilized to compute DCIA at the parcel level. The results were 1) a greater value of current DCIA in commercial areas than in residential areas (single family houses 40%, multi-family houses 64%, big box retails 77%, scattered small-scale retails 71%); 2) a significant reduction of DCIA for all land uses after hypothetically implementing LID applications (reduction rates ranged from 6.4% to 52.2%); and 3) the greatest change of DCIA in big box retail areas with pervious pavement and vegetated swale installation. The results will contribute to determining which land use type is of higher priority in implementing source-control stormwater infrastructure and providing local governments with a better index to calculate drainage fees, which are currently imposed on property owners based on total impervious area.
- 1 March 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydrologic Engineering
- Vol. 19 (3) , 495-508
Improved Time of Concentration Estimation on Overland Flow Surfaces Including Low-Sloped Planes
Time of concentration ( ) is one of the most used time parameters in hydrologic analyses. As topographic slope ( ) approaches zero, traditional estimation formulas predict large . Based on numerical modeling and a review of relevant literature, a lower bound for slope ( ) of 0.1% was identified as a threshold below which traditional estimation formulas become unreliable and alternate methods should be considered. In this study, slopes less than are defined as low slopes. Slopes equal to or exceeding are defined as standard slopes where traditional estimation formulas are appropriate. A field study was conducted on a concrete plot with a topographic slope of 0.25% to collect rainfall and runoff data between April 2009 and March 2010 to support numerical modeling of overland flows on low-sloped planes. A quasi-two-dimensional dynamic wave model (Q2DWM) was developed for overland flow simulation and validated using published and observed data. The validated Q2DWM was used in a parametric study to generate data for a range of slopes that were used to develop regression formulas for standard slopes ( ) and low slopes ( ).- 1 March 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydrologic Engineering
- Vol. 19 (3) , 495-508
Improved Time of Concentration Estimation on Overland Flow Surfaces Including Low-Sloped Planes
Time of concentration ( ) is one of the most used time parameters in hydrologic analyses. As topographic slope ( ) approaches zero, traditional estimation formulas predict large . Based on numerical modeling and a review of relevant literature, a lower bound for slope ( ) of 0.1% was identified as a threshold below which traditional estimation formulas become unreliable and alternate methods should be considered. In this study, slopes less than are defined as low slopes. Slopes equal to or exceeding are defined as standard slopes where traditional estimation formulas are appropriate. A field study was conducted on a concrete plot with a topographic slope of 0.25% to collect rainfall and runoff data between April 2009 and March 2010 to support numerical modeling of overland flows on low-sloped planes. A quasi-two-dimensional dynamic wave model (Q2DWM) was developed for overland flow simulation and validated using published and observed data. The validated Q2DWM was used in a parametric study to generate data for a range of slopes that were used to develop regression formulas for standard slopes ( ) and low slopes ( ).- Open Access
- 28 October 2013
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 10 (11) , 5433-5458
Design-with-Nature for Multifunctional Landscapes: Environmental Benefits and Social Barriers in Community Development
Since the early 1970s, Ian McHarg’s design-with-nature concept has been inspiring landscape architects, community and regional planners, and liked-minded professionals to create designs that take advantage of ecosystem services and promote environmental and public health. This study bridges the gap in the literature that has resulted from a lack of empirical examinations on the multiple performance benefits derived through design-with-nature and the under-investigated social aspect emanated from McHarg’s Ecological Determinism design approach. The Woodlands, TX, USA, an ecologically designed community development under McHarg’s approach, is compared with two adjacent communities that follow the conventional design approach. Using national environmental databases and multiple-year residents’ survey information, this study assesses three landscape performance metrics of McHarg’s approach: stormwater runoff, urban heat island effect, and social acceptance. Geographic Information Systems (GIS) was used to assess the development extent and land surface temperature distribution. Results show that McHarg’s approach demonstrates benefits in reducing runoff and urban heat island effect, whereas it confronts challenges with the general acceptance of manicured landscapes and thus results in a low safety perception level when residents interact with naturally designed landscapes. The authors argue that design-with-nature warrants multifunctionality because of its intrinsic interdisciplinary approach. Moreover, education and dissemination of successful examples can achieve a greater level of awareness among the public and further promote multifunctional design for landscape sustainability.
- 28 October 2013
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 10 (11) , 5433-5458
Open AccessDesign-with-Nature for Multifunctional Landscapes: Environmental Benefits and Social Barriers in Community Development
Since the early 1970s, Ian McHarg’s design-with-nature concept has been inspiring landscape architects, community and regional planners, and liked-minded professionals to create designs that take advantage of ecosystem services and promote environmental and public health. This study bridges the gap in the literature that has resulted from a lack of empirical examinations on the multiple performance benefits derived through design-with-nature and the under-investigated social aspect emanated from McHarg’s Ecological Determinism design approach. The Woodlands, TX, USA, an ecologically designed community development under McHarg’s approach, is compared with two adjacent communities that follow the conventional design approach. Using national environmental databases and multiple-year residents’ survey information, this study assesses three landscape performance metrics of McHarg’s approach: stormwater runoff, urban heat island effect, and social acceptance. Geographic Information Systems (GIS) was used to assess the development extent and land surface temperature distribution. Results show that McHarg’s approach demonstrates benefits in reducing runoff and urban heat island effect, whereas it confronts challenges with the general acceptance of manicured landscapes and thus results in a low safety perception level when residents interact with naturally designed landscapes. The authors argue that design-with-nature warrants multifunctionality because of its intrinsic interdisciplinary approach. Moreover, education and dissemination of successful examples can achieve a greater level of awareness among the public and further promote multifunctional design for landscape sustainability.
- 27 April 2013
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 43 (4) , 382-387
Comparing Erosion Control Products’ Performance Results from Field and Large-Scale Laboratory Testing
- 27 April 2013
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 43 (4) , 382-387
Comparing Erosion Control Products’ Performance Results from Field and Large-Scale Laboratory Testing
- 17 May 2012
- Published by American Society of Civil Engineers (ASCE)
- p. 360-371
Estimating Time of Concentration on Low-Slope Planes Using Diffusion Hydrodynamic Model
The time of concentration (Tc) is an important parameter for hydrologic design, analysis, and modeling. Error in the estimation of Tc will cause error in prediction of peak discharge (Qp), resulting in an incorrect design. Overland flow Tc depends on several factors, such as rainfall intensity (i), length (L), topographic slope (S0), and flow resistance (n). Generally, Tc has an inverse relation to S0. For the areas with very small or zero S0, use of such small values for S0 in traditional methods (empirical equations) for estimating Tc can produce very large values of Tc that seem to be unrealistic and incorrect. This study was conducted to identify a lower slope bound (SLB) for the use of traditional equations in determination of Tc and to propose the use of an alternate method for the determination of Tc on low-slope planes. The diffusion hydrodynamic model (DHM) was validated using data collected from published studies and field data collected in this study, including observed rainfall hyetographs and runoff hydrographs for 27 rainfall events for watersheds with relatively low-slope. After model validation, DHM was used to generate parametric relations between Tc and its explanatory variables (rainfall intensity, length, slope and resistance to flow) and extend the regression model to low-slope planes.
- 17 May 2012
- Published by American Society of Civil Engineers (ASCE)
- p. 360-371
Estimating Time of Concentration on Low-Slope Planes Using Diffusion Hydrodynamic Model
The time of concentration (Tc) is an important parameter for hydrologic design, analysis, and modeling. Error in the estimation of Tc will cause error in prediction of peak discharge (Qp), resulting in an incorrect design. Overland flow Tc depends on several factors, such as rainfall intensity (i), length (L), topographic slope (S0), and flow resistance (n). Generally, Tc has an inverse relation to S0. For the areas with very small or zero S0, use of such small values for S0 in traditional methods (empirical equations) for estimating Tc can produce very large values of Tc that seem to be unrealistic and incorrect. This study was conducted to identify a lower slope bound (SLB) for the use of traditional equations in determination of Tc and to propose the use of an alternate method for the determination of Tc on low-slope planes. The diffusion hydrodynamic model (DHM) was validated using data collected from published studies and field data collected in this study, including observed rainfall hyetographs and runoff hydrographs for 27 rainfall events for watersheds with relatively low-slope. After model validation, DHM was used to generate parametric relations between Tc and its explanatory variables (rainfall intensity, length, slope and resistance to flow) and extend the regression model to low-slope planes.
- 1 August 2010
- Published by Wiley
- p. 413-430
Bioretention, Low Impact Development, and Stormwater Management
- 1 August 2010
- Published by Wiley
- p. 413-430
Bioretention, Low Impact Development, and Stormwater Management
- 1 June 2009
- Published by Emerald Publishing in Geosynthetics International
- Vol. 16 (3) , 139-146
Lifetime cost and performance of slope erosion control products for construction
This study investigated the relationship between cost and performance of slope erosion control products in the Texas Department of Transportation's Approved Products List. Using (1) the erosion control performance data, (2) product cost data collected from surveys and (3) predicted product longevity based on material composition, a lifetime product performance, which estimated the potential soil amount protected by the product over time, was quantified. The study also examined the relationship between product price, soil loss performance and predicted longevity. The results indicate that product price was highly associated with predicted longevity. Products that could offer the longest protection cost more than those offering short or temporary protection. Results also show that price did not correlate with initial soil protection performance. Rather, price significantly correlated with lifetime product performance, which indicates that marketed product prices well represent the lifetime worth.
- 1 June 2009
- Published by Emerald Publishing in Geosynthetics International
- Vol. 16 (3) , 139-146
Lifetime cost and performance of slope erosion control products for construction
This study investigated the relationship between cost and performance of slope erosion control products in the Texas Department of Transportation's Approved Products List. Using (1) the erosion control performance data, (2) product cost data collected from surveys and (3) predicted product longevity based on material composition, a lifetime product performance, which estimated the potential soil amount protected by the product over time, was quantified. The study also examined the relationship between product price, soil loss performance and predicted longevity. The results indicate that product price was highly associated with predicted longevity. Products that could offer the longest protection cost more than those offering short or temporary protection. Results also show that price did not correlate with initial soil protection performance. Rather, price significantly correlated with lifetime product performance, which indicates that marketed product prices well represent the lifetime worth.
- 1 August 2008
- Published by Wiley in Water Environment Research
- Vol. 80 (8) , 740-747
Relationship Between Antecedent Dry Period and Highway Pollutant: Conceptual Models of Buildup and Removal Processes
This paper investigated the highway stormwater quality at two Texas cities—Austin and College Station. Two highways with high average daily traffic were monitored using passive stormwater samplers for collecting first‐flush runoff during a 16‐month period. Detailed traffic and weather data were collected at College Station sites, but only weather data were obtained at Austin sites. A stepwise regression analysis on College Station data identifies the antecedent dry period (ADP) as the most significant predictor of pollutant concentration. Specifically, the College Station data show an unexpected result that pollutant event mean concentrations significantly decrease with increasing ADP for all analyzed pollutants. However, the runoff concentrations observed in Austin were not significantly correlated with ADP. The result from College Station data provides a different insight to the pollutant buildup and removal process on highways. Conceptual highway pollutant buildup and removal models are proposed for generating further discussion and research interest.
- 1 August 2008
- Published by Wiley in Water Environment Research
- Vol. 80 (8) , 740-747
Relationship Between Antecedent Dry Period and Highway Pollutant: Conceptual Models of Buildup and Removal Processes
This paper investigated the highway stormwater quality at two Texas cities—Austin and College Station. Two highways with high average daily traffic were monitored using passive stormwater samplers for collecting first‐flush runoff during a 16‐month period. Detailed traffic and weather data were collected at College Station sites, but only weather data were obtained at Austin sites. A stepwise regression analysis on College Station data identifies the antecedent dry period (ADP) as the most significant predictor of pollutant concentration. Specifically, the College Station data show an unexpected result that pollutant event mean concentrations significantly decrease with increasing ADP for all analyzed pollutants. However, the runoff concentrations observed in Austin were not significantly correlated with ADP. The result from College Station data provides a different insight to the pollutant buildup and removal process on highways. Conceptual highway pollutant buildup and removal models are proposed for generating further discussion and research interest.