YZYiyang Zhang

Yiyang Zhang

*This is an algorithmically generated author record based on publicly available information.

Yiyang Zhang has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimization of the Runner for Extremely Low Head Bidirectional Tidal Bulb Turbine

    by Yongyao Luo, Xin Liu, Zhengwei Wang, Yexiang Xiao, Chenglian He, Yiyang Zhang

    This paper presents a multi-objective optimization procedure for bidirectional bulb turbine runners which is completed using ANSYS Workbench. The optimization procedure is able to check many more geometries with less manual work. In the procedure, the initial blade shape is parameterized, the inlet and outlet angles (β1, β2), as well as the starting and ending wrap angles (θ1, θ2) for the five sections of the blade profile, are selected as design variables, and the optimization target is set to obtain the maximum of the overall efficiency for the ebb and flood turbine modes. For the flow analysis, the ANSYS CFX code, with a SST (Shear Stress Transport) k-ω turbulence model, has been used to evaluate the efficiency of the turbine. An efficient response surface model relating the design parameters and the objective functions is obtained. The optimization strategy was used to optimize a model bulb turbine runner. Model tests were carried out to validate the final designs and the design procedure. For the four-bladed turbine, the efficiency improvement is 5.5% in the ebb operation direction, and 2.9% in the flood operation direction, as well as 4.3% and 4.5% for the three-bladed turbine. Numerical simulations were then performed to analyze the pressure pulsation in the pressure and suction sides of the blade for the prototype turbine with optimal four-bladed and three-bladed runners. The results show that the runner rotational frequency (fn) is the dominant frequency of the pressure pulsations in the blades for ebb and flood turbine modes, and the gravitational effect, rather than rotor-stator interaction (RSI), plays an important role in a low head horizontal axial turbine. The amplitudes of the pressure pulsations on the blade side facing the guide vanes varies little with the water head. However, the amplitudes of the pressure pulsations on the blade side facing the diffusion tube linearly increase with the water head. These results could provide valuable insight for reducing the pressure amplitudes in the bidirectional bulb turbine.


  • Effect of Axial Clearance on the Efficiency of a Shrouded Centrifugal Pump

    by Cao Lei, Zhang Yiyang, Wang Zhengwei, Xiao Yexiang, Liu Ruixiang

    Clearance always exists between the rotating impeller shrouds and the stationary casing covers in shrouded centrifugal pumps, which affects the pump internal flow and performance. Model tests were conducted for a shrouded centrifugal pump with back blades on the front shroud, and the performance parameters were obtained for three different impeller axial positions. Adjusting the impeller axial position can change the axial size of both the front and back clearances simultaneously. The results show that a tiny variation of the axial clearance size can substantially change the pump performance. A large front clearance reduces the pump efficiency and head with little change in the shaft power. Numerical simulations for a wide range of operating conditions for the three models with different impeller axial positions using the Reynolds-Averaged Navier–Stokes (RANS) with shear stress transport (SST) k–ω turbulence model agree well with the experimental results. The numerical results show how the clearance flow interfere with the main flow as the axial clearance is varied. The change in the pump hydraulic efficiency, volumetric efficiency, and mechanical efficiency was analyzed for various clearances. The hydraulic efficiency is the lowest one of the three kinds of efficiency and changes dramatically as the flow rate increases; thus, the hydraulic efficiency plays a decisive role in the pump performance. The volumetric efficiency is most sensitive to the axial clearance, which obviously decreases as the front clearance is increased. Therefore, the volumetric efficiency is the key factor for the change of the gross efficiency as the axial clearance changes. The mechanical loss varies little with changes in both axial clearance and flow rate so the mechanical efficiency can be regarded as a constant. The effect of axial clearances on the efficiency of shrouded centrifugal pumps should be considered to enable more efficient designs.