LMLianxiang Ma

Lianxiang Ma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lianxiang Ma has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Condensation Heat Transfer Experiments of R410A and R32 in Horizontal Smooth and Enhanced Tubes

    by Wei Feng, Yu Gao, Wei Li, Junye Li, Yanlong Cao, Tianwen Li, S. A. Sherif, Lianxiang Ma, Hanbing Ke

    A horizontal smooth copper tube and two enhanced tubes (a dimpled tube and a diamond-shaped tube) with a length of 2 m and an outer diameter of 9.52 mm were studied in a two-phase condensation experiment using R410A and R32 as heat transfer working fluids. The condensation heat transfer performance of different heat transfer tubes at various mass fluxes ranging from 150 to 400 kg/(m2s) and different vapor qualities ranging from 0.8 to 0.2 was studied experimentally. For R410A, the heat transfer coefficients (HTCs) of the dimpled tube and the diamond-shaped tube were found to be 1.39-1.52 times and 1.30-1.35 times higher than those of the smooth tube, respectively. For R32, the HTCs were found to be 1.46-1.59 times higher for the dimpled tube and 1.26-1.35 times higher for the diamond-shaped tube than for the smooth tube. The diamond-shaped tube was found to be effective in directing the flow of the liquid phase and in thinning the liquid film thickness. The dimpled tube was found to promote droplet entrainment and disturbance. Both of those effects contributed to improving the HTCs in the two enhanced tubes investigated. The HTCs of R410A were found to be lower than those of R32 because of the smaller specific heat capacity, smaller latent heat of condensation, and relatively poorer thermal conductivity of R410A. Taking the combined effect of heat transfer and pressure drop into account, a performance enhancement factor (PEF) was computed and was found to range from 0.9 to 1.51. Based on the experimental data collected, a new empirical correlation equation has been proposed with a maximum error band of 10%. Flow pattern maps for the tested tubes have also been generated and are presented in the paper. Both of the two enhanced tubes were found to promote the development of annular flow. The HTCs were found to be highest when the flow pattern was of the annular flow type.


  • Open Access

    Study of the Effect of Carbon Black Filling on the Mechanical Behavior of Rubber Hyper-Elasticity

    by Zepeng Wang, Xiulong Yao, Fangru Hu, Chuanxiang Ma, Xinyan Li, Zhanli Miao, Junping Song, Lianxiang Ma, Wei Li

    We have particularly investigated the correlation law of the effect of different carbon black fillings on the hyper-elastic mechanical behavior of natural rubber by conducting uniaxial tensile tests over a wide range of deformations with different volume fractions of carbon black fillings (0%, 4.7%, 8.9%, 12.8%, 16.4%, 19.7%, 22.7% and 25.2%). The results show that the stress-strain curve for carbon black filled rubber increases with the amount of filling, meaning that the rubber gradually becomes “harder”. We explore the correlation between the carbon black filling volume and the parameters of the Yeoh constitutive model by examining the Yeoh constitutive model to characterize the hyper-elastic mechanical behavior of rubber with different carbon black fillings. A quantitative relationship between the material parameters and the carbon black filling volume in the Yeoh constitutive model is presented. A method for calculating the material parameters of the Yeoh constitutive model is developed, and it predicts the correlation between the hyper-elastic properties of rubber and the volume fraction of the carbon black filling.


  • Open Access

    Carbon Black Filling Amount on the Hyper-elastic Mechanical Behavior of Rubber

    by Zepeng Wang, Xiulong Yao, Fangru Hu, Chuanxiang Ma, Xinyan Li, Zhanli Miao, Junping Song, Lianxiang Ma, Wei Li

    We have particularly investigated the correlation law of the effect of different carbon black fillings on the hyper-elastic mechanical behavior of natural rubber by conducting uniaxial tensile tests over a wide range of deformations with different volume fractions of carbon black fillings (0%, 4.7%, 8.9%, 12.8%, 16.4%, 19.7%, 22.7%, 25.2%). The results show that the stress-strain curve for carbon black filled rubber increases with the amount of filling, meaning that the rubber gradually becomes "harder". We explore the correlation between the carbon black filling volume and the parameters of the Yeoh constitutive model by examining the Yeoh constitutive model to characterize the hyper-elastic mechanical behavior of rubber with different carbon black fillings. A quantitative relationship between the material parameters and the carbon black filling volume in the Yeoh constitutive model is presented. A method for calculating the material parameters of the Yeoh constitutive model is developed and it predicts the correlation between the hyper-elastic properties of rubber and the volume fraction of carbon black filling.


  • Open Access

    Molecular Dynamics Simulation of the Thermomechanical and Tribological Properties of Graphene-Reinforced Natural Rubber Nanocomposites

    by Zepeng Wang, Minglong Su, Xinwu Duan, Xiulong Yao, Xiaoying Han, Junping Song, Lianxiang Ma

    The thermomechanical and tribological properties of graphene (GNS)-reinforced NR were investigated using molecular dynamics (MD) simulations. The amorphous molecular dynamics models of two nanocomposites, i.e., natural rubber (pure NR) and graphene/natural rubber (GNS/NR), were established. In addition, the thermodynamic properties of the two materials, before and after the incorporation of graphene into the natural rubber matrix, were investigated through analytical comparison. The results showed that after the graphene was added to the rubber matrix as a reinforcing material, the elastic modulus and shear modulus were increased by 110% and 94.8%, respectively, the tensile property was increased by 178%, the overall thermal conductivity of the composite system was increased by 59%, the glass transition temperature increased from 223 K to 236 K, and the rigidity of the material matrix was significantly improved. The inherent interactions and wear mechanisms of the polymer nanocomposites were discussed at the atomic scale by analyzing the changes in temperature, atomic velocity, relative atomic concentration, and radial distribution functions at the friction interface in the thickness direction.


  • Open Access

    Temperature Dependence of Rubber Hyper-Elasticity Based on Different Constitutive Models and Their Prediction Ability

    by Xiulong Yao, Zepeng Wang, Lianxiang Ma, Zhanli Miao, Minglong Su, Xiaoying Han, Jian Yang

    Based on the electronic universal testing machine with a temperature chamber, this paper investigated the temperature and filler effects on the hyper-elastic behavior of reinforced rubbers and revealed the regulation of the stress and strain of the natural rubber and filled rubber with temperature. The experimental results showed that the hyper-elastic behavior of the filled rubber was temperature-dependent in a wide range. Comparing the adaptability of different models to the stress–strain variation with temperature, the Yeoh model was proven to reasonably characterize the experimental data at different temperatures. Based on the Yeoh model, an explicit temperature-dependent constitutive model was developed to describe the stress–strain response of the filled rubber in a relatively large temperature range. The prediction data of this proposed constitutive model fit well with the test data of the mechanical experiments, indicating that the model is suitable to characterize the large deformation behavior of filled rubbers at different temperatures to a certain degree. The proposed model can be used to obtain the material parameters and has been successfully applied to finite element analysis (FEA), suggesting a high application value. Notably, the model has a simple form and can be conveniently applied in related performance tests of actual production or finite element analysis.


  • Open Access

    Ability of Constitutive Models to Characterize the Temperature Dependence of Rubber Hyperelasticity and to Predict the Stress-Strain Behavior of Filled Rubber under Different Defor Mation States

    by Xintao Fu, Zepeng Wang, Lianxiang Ma

    In this paper, some representative hyperelastic constitutive models of rubber materials were reviewed from the perspectives of molecular chain network statistical mechanics and continuum mechanics. Based on the advantages of existing models, an improved constitutive model was developed, and the stress–strain relationship was derived. Uniaxial tensile tests were performed on two types of filled tire compounds at different temperatures. The physical phenomena related to rubber deformation were analyzed, and the temperature dependence of the mechanical behavior of filled rubber in a larger deformation range (150% strain) was revealed from multiple angles. Based on the experimental data, the ability of several models to describe the stress–strain mechanical response of carbon black filled compound was studied, and the application limitations of some constitutive models were revealed. Combined with the experimental data, the ability of Yeoh model, Ogden model (n = 3), and improved eight-chain model to characterize the temperature dependence was studied, and the laws of temperature dependence of their parameters were revealed. By fitting the uniaxial tensile test data and comparing it with the Yeoh model, the improved eight-chain model was proved to have a better ability to predict the hyperelastic behavior of rubber materials under different deformation states. Finally, the improved eight-chain model was successfully applied to finite element analysis (FEA) and compared with the experimental data. It was found that the improved eight-chain model can accurately describe the stress–strain characteristics of filled rubber.


  • Open Access

    Temperature-Dependence of Rubber Hyperelasticity Based on the Eight-Chain Model

    by Xintao Fu, Zepeng Wang, Lianxiang Ma, Zhaoxuan Zou, Qingling Zhang, Xinxin Guan

    Rubber-based materials are widely used in a variety of industrial applications. In these applications, rubber components withstand various loading conditions over a range of temperatures. It is of great significance to study the mechanical behavior of vulcanized rubber at different temperatures, especially in a range of high temperatures. The temperature dependence of the constitutive behavior of filled rubber is important for the performance of the rubber. However, only a few constitutive models have been reported that investigate the stress–temperature relationship. In this paper, based on an analysis of experimental data, the effects of temperature on the hyperelastic behaviors of both natural rubber and filled rubber, with different mass fractions of carbon black, were studied. The regulation of stress and strain of natural rubber and filled rubber with temperature was revealed. In addition, an eight-chain model that can reasonably characterize the experimental data at different temperatures was proved. An explicit temperature-dependent constitutive model was developed based on the Arruda-Boyce model to describe the stress–strain response of filled rubber in a relatively large temperature range. Meanwhile, it was proved that the model can predict the effect of temperature on the hyperelastic behavior of filled rubber. Finally, the improved Arruda-Boyce model was used to obtain the material parameters and was then successfully applied to finite element analysis (FEA), which showed that the model has high application value. In addition, the model had a simple form and could be conveniently applied in related performance test of actual production or finite element analysis.


  • Open Access

    Flow Boiling Heat Transfer Characteristics in Horizontal, Three-Dimensional Enhanced Tubes

    by Zhi-Chuan Sun, Xiang Ma, Lian-Xiang Ma, Wei Li, David J. Kukulka

    An experimental investigation was conducted to explore the flow boiling heat transfer characteristics of refrigerants R134A and R410A inside a smooth tube, as well as inside two newly developed surface-enhanced tubes. The internal surface structures of the two enhanced tubes are comprised of protrusions/dimples and petal-shaped bumps/cavities. The equivalent inner diameter of all tested tubes is 11.5 mm, and the tube length is 2 m. The experimental test conditions included saturation temperatures of 6 °C and 10 °C; mass velocities ranging from 70 to 200 kg/(m2s); and heat fluxes ranging from 10 to 35 kW/m2, with inlet and outlet vapor quality of 0.2 and 0.8. It was observed that the enhanced tubes exhibit excellent flow boiling heat transfer performance. This can be attributed to the complex surface patterns of dimples and petal arrays that increase the active heat transfer area; in addition, more nucleation sites are produced, and there is also an increased interfacial turbulence. Results showed that the boiling heat transfer coefficient of the enhanced surface tubes was 1.15–1.66 times that of the smooth tubing. Also, effects of the flow pattern and saturated temperature are discussed. Finally, a comparison of several existing flow boiling heat transfer models using the data from the current study is presented.


  • Open Access

    High Thermal Conductivity of Flake Graphite Reinforced Polyethylene Composites Fabricated by the Powder Mixing Method and the Melt-Extruding Process

    by Zhichun Liu, Runchun Tu, Quanwen Liao, Hanlin Hu, Jinguo Yang, Yan He, Huiguang Bian, Lianxiang Ma, Wei Liu

    The thermal conductivity of flake graphite (FG) particulates reinforced high density polyethylene (HDPE) composites was systematically investigated under a special dispersion state of FG particles. The effects of particle size, weight filling ratio and proportion of various sizes were discussed in detail. A special composite (15 wt % 500 μm/10 wt % 200 μm/10 wt % 20 μm/5 wt % 2 μm FG + 60 wt % polyethylene (PE)) with a high thermal conductivity about 2.49 W/(m·K) was produced by combining the synergistic effect of several fillers. The component material size distribution was employed to analyze the effect of particle size. And scanning electron microscope (SEM) was adopted to observe the FG network in the composites. Thermogravimetric analysis (TGA) revealed the good thermal stability of composites. Differential scanning calorimetry (DSC) indicated that all composites own a similar melting temperature. Sample compression experiment indicated that all composites still exhibit high mechanical strength. Consequently, the easy-making flake graphite reinforced polyethylene composites with a high thermal conductivity would have a wide application in the new material field, such as a thermal interface material, a heat exchanger, voltage cable, etc.