JSJunping Song

Junping Song

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Junping Song has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Application of a New Carbon Black Filler in SBR Composites

    by Junan Zhou, Bainan Tang, Liangchen Yu, Junping Song, Zepeng Wang

    The microstructure and properties of a new type of carbon black produced by a domestic company through a new process were systematically characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Raman spectroscopy, and X-ray diffraction (XRD). The vulcanization properties, mechanical properties, and electrical conductivity of the new carbon black with different filler amounts were investigated in styrene butadiene rubber (SBR), using the traditional reinforcing filler N660 carbon black as a control. The experimental results demonstrate that the new carbon black exhibits a stratified structure with a specific surface area of 345.96 m2/g, and its particle size distribution is primarily concentrated within the 0.1–1 μm range. When the filling ratio was 30 phr/100 phr, the tensile strength of SBR composites filled with the new carbon black increased by 12.3% and the tear strength increased by 9.6% compared with those filled with N660 carbon black. In summary, the new carbon black can significantly improve the comprehensive performance of SBR composites and reduce the production cost. This provides a new type of material for the rubber industry that takes into account both economy and performance while also providing reference data for basic research in the field of SBR.


  • Open Access

    Comparative Study on the Properties of Nitrile Rubber Filled with Carbon Powder and Carbon Black

    by Junan Zhou, Zepeng Wang, Liangchen Yu, Bainan Tang, Junping Song

    The properties of carbon powder filled nitrile rubber (NBR) were investigated. The effect of carbon powder content on the mechanical strength, vulcanization properties, mechanical properties, electrical conductivity, and thermal conductivity of NBR was explored. The purpose of the research is to pursue the optimal filling ratio and conditions of carbon powder to optimize the performance of rubber products.The reasonable filling range of carbon powder has been compared with N660 carbon black filled NBR and determined to evaluate the advantages and disadvantages of carbon powder. The suitable application scenarios of carbon powder is clarified .The research results indicate that carbon powder can delay the sulfurization of NBR in the sulfurization system. The research results indicate that carbon powder can delay the sulfurization of NBR. In terms of filling system, the tensile strength, tear strength, and elongation at break of NBR gradually enhance as the amount of carbon powder increases. Carbon powder can replace carbon black in the application of NBR to improve the comprehensive performance of NBR, which provides a new kind of reinforcing material for NBR.

  • Open Access

    Molecular Dynamics Simulation of Effect of Carbon Nanotube Diameter on Properties of Crosslinked Epichlorohydrin Rubbers

    by Zepeng Wang, Xinyan Li, Liangchen Yu, Junping Song

    Molecular dynamics simulation (MD) technology can be used to simulate and study the physicochemical properties of polymer materials on the basis of material data obtained in traditional experiments. In this study, we use MD to construct models of crosslinked carbon nanotubes/epichlorohydrin rubber composites with different carbon nanotube diameters and study the effect of CNT tube diameter on crosslinked ECO. The results show that with the increase in CNT tube diameter, the contact area between the CNTs and rubber matrix increases, the interaction force is enhanced, the free volume fraction of rubber matrix decreases by 21.36%, the glass transition temperature increases by 6.5%, the mean square displacement decreases, the radius of gyration decreases by 3.18 Å, and the radial distribution function of the C-atom group and the H-atom group in the system gradually decreases. The binding energy between the two is elevated, which in turn verifies the enhancement of the interaction force.


  • Open Access

    Study of the Effect of Carbon Black Filling on the Mechanical Behavior of Rubber Hyper-Elasticity

    by Zepeng Wang, Xiulong Yao, Fangru Hu, Chuanxiang Ma, Xinyan Li, Zhanli Miao, Junping Song, Lianxiang Ma, Wei Li

    We have particularly investigated the correlation law of the effect of different carbon black fillings on the hyper-elastic mechanical behavior of natural rubber by conducting uniaxial tensile tests over a wide range of deformations with different volume fractions of carbon black fillings (0%, 4.7%, 8.9%, 12.8%, 16.4%, 19.7%, 22.7% and 25.2%). The results show that the stress-strain curve for carbon black filled rubber increases with the amount of filling, meaning that the rubber gradually becomes “harder”. We explore the correlation between the carbon black filling volume and the parameters of the Yeoh constitutive model by examining the Yeoh constitutive model to characterize the hyper-elastic mechanical behavior of rubber with different carbon black fillings. A quantitative relationship between the material parameters and the carbon black filling volume in the Yeoh constitutive model is presented. A method for calculating the material parameters of the Yeoh constitutive model is developed, and it predicts the correlation between the hyper-elastic properties of rubber and the volume fraction of the carbon black filling.


  • Open Access

    Carbon Black Filling Amount on the Hyper-elastic Mechanical Behavior of Rubber

    by Zepeng Wang, Xiulong Yao, Fangru Hu, Chuanxiang Ma, Xinyan Li, Zhanli Miao, Junping Song, Lianxiang Ma, Wei Li

    We have particularly investigated the correlation law of the effect of different carbon black fillings on the hyper-elastic mechanical behavior of natural rubber by conducting uniaxial tensile tests over a wide range of deformations with different volume fractions of carbon black fillings (0%, 4.7%, 8.9%, 12.8%, 16.4%, 19.7%, 22.7%, 25.2%). The results show that the stress-strain curve for carbon black filled rubber increases with the amount of filling, meaning that the rubber gradually becomes "harder". We explore the correlation between the carbon black filling volume and the parameters of the Yeoh constitutive model by examining the Yeoh constitutive model to characterize the hyper-elastic mechanical behavior of rubber with different carbon black fillings. A quantitative relationship between the material parameters and the carbon black filling volume in the Yeoh constitutive model is presented. A method for calculating the material parameters of the Yeoh constitutive model is developed and it predicts the correlation between the hyper-elastic properties of rubber and the volume fraction of carbon black filling.


  • Open Access

    Molecular Dynamics Simulation of the Thermomechanical and Tribological Properties of Graphene-Reinforced Natural Rubber Nanocomposites

    by Zepeng Wang, Minglong Su, Xinwu Duan, Xiulong Yao, Xiaoying Han, Junping Song, Lianxiang Ma

    The thermomechanical and tribological properties of graphene (GNS)-reinforced NR were investigated using molecular dynamics (MD) simulations. The amorphous molecular dynamics models of two nanocomposites, i.e., natural rubber (pure NR) and graphene/natural rubber (GNS/NR), were established. In addition, the thermodynamic properties of the two materials, before and after the incorporation of graphene into the natural rubber matrix, were investigated through analytical comparison. The results showed that after the graphene was added to the rubber matrix as a reinforcing material, the elastic modulus and shear modulus were increased by 110% and 94.8%, respectively, the tensile property was increased by 178%, the overall thermal conductivity of the composite system was increased by 59%, the glass transition temperature increased from 223 K to 236 K, and the rigidity of the material matrix was significantly improved. The inherent interactions and wear mechanisms of the polymer nanocomposites were discussed at the atomic scale by analyzing the changes in temperature, atomic velocity, relative atomic concentration, and radial distribution functions at the friction interface in the thickness direction.