Tomasz Arciszewski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tomasz Arciszewski has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Rafal Kicinger
Research Assistant Professor, Department of Civil, Environmental and Infrastructure Engineering, George Mason University, 4400 University Drive, MS 4A6, Fairfax, VA 22030
4 shared publications - Kenneth De Jong
George Mason University
3 shared publications - Mark H. Houck
Ph.D. Candidate, Dept. of Computer Science, Mail Stop 4A5, George Mason Univ., Fairfax, VA 22030-4444
2 shared publications - Moe M. Wadda
Ph.D. Candidate, Dept. of Computer Science, Mail Stop 4A5, George Mason Univ., Fairfax, VA 22030-4444
2 shared publications - Zbigniew Skolicki
Ph.D. Candidate, Dept. of Computer Science, Mail Stop 4A5, George Mason Univ., Fairfax, VA 22030-4444
2 shared publications Janusz Wnek
George Mason University, U.S.A.
1 shared publication
Latest Publications
- 16 June 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 891-898
Synectical Building of Representation Space: A Key to Computing Education
This paper proposes a method for building a design representation space capturing domain knowledge and at the same time creating an opportunity to acquire knowledge outside the problem domain. This dual emphasis increases the potential for producing novel designs. The method combines the advantages of heuristic thinking based on Synectics with traditional systematic and analytical thinking and is intended mostly for use in computing education. It will allow students to develop a fundamental understanding how to acquire knowledge necessary for conceptual design while preserving their ability to explore various domains and to expand a representation space.
- 16 June 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 891-898
Synectical Building of Representation Space: A Key to Computing Education
This paper proposes a method for building a design representation space capturing domain knowledge and at the same time creating an opportunity to acquire knowledge outside the problem domain. This dual emphasis increases the potential for producing novel designs. The method combines the advantages of heuristic thinking based on Synectics with traditional systematic and analytical thinking and is intended mostly for use in computing education. It will allow students to develop a fundamental understanding how to acquire knowledge necessary for conceptual design while preserving their ability to explore various domains and to expand a representation space.
- Open Access
- 3 June 2010
- Published by MDPI AG in Sustainability
- Vol. 2 (6) , 1558-1570
Sustainable Energy Development: The Key to a Stable Nigeria
This paper proposes the use of sustainable energy systems based on solar and biomass technologies to provide solutions to utility challenges in Nigeria and acute water shortage both in rural and urban areas of that country. The paper highlights the paradoxes of oil-rich Nigeria and the stark reality of social infrastructure deprivations in that country. Perennial power outages over many years have translated to the absence of or poorly-developed basic social infrastructures in Nigeria. The consequences of this lack have been an increase in abject poverty in rural and urban communities as well as the erosion of social order and threats to citizen and their property. This paper proposes the adaptation of two emerging technologies for building sustainable energy systems and the development of decentralized and sustainable energy sources as catalyst for much-needed social infrastructure development through the creation of Renewable Energy Business Incubators, creative lending strategies, NGO partnerships and shifting energy-distribution responsibilities. These changes will stimulate grassroots economies in the country, develop large quantities of much needed clean water, maintain acceptable standards of sanitation and improve the health and wellbeing of Nigerian communities. The proposed strategies are specific to the Nigerian context; however, the authors suggest that the same or similar strategies may provide energy and social infrastructure development solutions to other developing countries as well.
- 3 June 2010
- Published by MDPI AG in Sustainability
- Vol. 2 (6) , 1558-1570
Open AccessSustainable Energy Development: The Key to a Stable Nigeria
This paper proposes the use of sustainable energy systems based on solar and biomass technologies to provide solutions to utility challenges in Nigeria and acute water shortage both in rural and urban areas of that country. The paper highlights the paradoxes of oil-rich Nigeria and the stark reality of social infrastructure deprivations in that country. Perennial power outages over many years have translated to the absence of or poorly-developed basic social infrastructures in Nigeria. The consequences of this lack have been an increase in abject poverty in rural and urban communities as well as the erosion of social order and threats to citizen and their property. This paper proposes the adaptation of two emerging technologies for building sustainable energy systems and the development of decentralized and sustainable energy sources as catalyst for much-needed social infrastructure development through the creation of Renewable Energy Business Incubators, creative lending strategies, NGO partnerships and shifting energy-distribution responsibilities. These changes will stimulate grassroots economies in the country, develop large quantities of much needed clean water, maintain acceptable standards of sanitation and improve the health and wellbeing of Nigerian communities. The proposed strategies are specific to the Nigerian context; however, the authors suggest that the same or similar strategies may provide energy and social infrastructure development solutions to other developing countries as well.
- 1 January 2009
- Published by American Society of Civil Engineers (ASCE) in Journal of Computing in Civil Engineering
- Vol. 23 (1) , 22-33
Bioinspired Computational Framework for Enhancing Creativity, Optimality, and Robustness in Design
This paper presents results of transdisciplinary research on the development of a bioinspired computational framework for engineering design. This framework is intended to support design by addressing three critical design objectives, including novelty, optimality, and robustness. It provides several computational models and methods, which are inspired by fundamental processes occurring in nature, and discusses their potential for enhancing design. They include models and methods for evolutionary, developmental, and coevolutionary design. Their use is illustrated with examples from the area of steel structural design ranging from a simple cantilever beam design problem to a much more complex problem of designing wind bracings in tall buildings. The paper also shows how several methods and models can be integrated and form a coherent bioinspired computational framework for engineering design.
- 1 January 2009
- Published by American Society of Civil Engineers (ASCE) in Journal of Computing in Civil Engineering
- Vol. 23 (1) , 22-33
Bioinspired Computational Framework for Enhancing Creativity, Optimality, and Robustness in Design
This paper presents results of transdisciplinary research on the development of a bioinspired computational framework for engineering design. This framework is intended to support design by addressing three critical design objectives, including novelty, optimality, and robustness. It provides several computational models and methods, which are inspired by fundamental processes occurring in nature, and discusses their potential for enhancing design. They include models and methods for evolutionary, developmental, and coevolutionary design. Their use is illustrated with examples from the area of steel structural design ranging from a simple cantilever beam design problem to a much more complex problem of designing wind bracings in tall buildings. The paper also shows how several methods and models can be integrated and form a coherent bioinspired computational framework for engineering design.
- 23 July 2007
- Published by American Society of Civil Engineers (ASCE)
- p. 399-410
Coevolutionary Structural Design for Robustness
This paper proposes a new nature-inspired method for achieving robustness of structural designs. In particular, biological processes of coevolution encoded in coevolutionary algorithms are proposed here to concurrently search the representation spaces of structural designs and of their loading cases, hi the proposed model, coevolutionary algorithms use two populations which competitively coevolve. The first population contains structural designs, while the second one contains loading cases. The quality of each individual structural design in the first population is determined by measuring how well it performs against the loading cases from the second population. On the other hand, the goodness of each loading case depends on the number of designs it "defeated," i.e., how many designs didn't succeed in satisfying design requirements (e.g., maximum internal forces, maximum displacement, etc.). This approach encourages generation of robust structural designs performing well against various loading cases. The proposed coevolutionary design method is illustrated by a simple demonstration problem of a welded beam design. The paper also presents initial research conclusions and discusses the most promising paths for future research.
- 23 July 2007
- Published by American Society of Civil Engineers (ASCE)
- p. 399-410
Coevolutionary Structural Design for Robustness
This paper proposes a new nature-inspired method for achieving robustness of structural designs. In particular, biological processes of coevolution encoded in coevolutionary algorithms are proposed here to concurrently search the representation spaces of structural designs and of their loading cases, hi the proposed model, coevolutionary algorithms use two populations which competitively coevolve. The first population contains structural designs, while the second one contains loading cases. The quality of each individual structural design in the first population is determined by measuring how well it performs against the loading cases from the second population. On the other hand, the goodness of each loading case depends on the number of designs it "defeated," i.e., how many designs didn't succeed in satisfying design requirements (e.g., maximum internal forces, maximum displacement, etc.). This approach encourages generation of robust structural designs performing well against various loading cases. The proposed coevolutionary design method is illustrated by a simple demonstration problem of a welded beam design. The paper also presents initial research conclusions and discusses the most promising paths for future research.
- 1 July 2006
- Published by American Society of Civil Engineers (ASCE) in Journal of Water Resources Planning and Management
- Vol. 132 (4) , 211-217
Reduction of Physical Threats to Water Distribution Systems
The potential threats to U.S. water supply systems have changed fundamentally in the past 4 years. Prior to 2001, the major threats were natural causes, accidents, and some malicious behavior by a small group of individuals. Against these threats, water supply agencies have done a truly remarkable job of ensuring a safe, dependable supply. However, threats posed by an organized group of actors may represent a new and different challenge to the security of water supplies. A tool to assist in identifying possible attacks has been developed. Knowledge of these attack scenarios may help in designing countermeasures. The tool uses evolutionary computation as the optimization method, and EPANET as the system simulator. Examples of its use to identify effective physical attacks against a realistic but hypothetical pipe network and initial corresponding countermeasures are presented.
- 1 July 2006
- Published by American Society of Civil Engineers (ASCE) in Journal of Water Resources Planning and Management
- Vol. 132 (4) , 211-217
Reduction of Physical Threats to Water Distribution Systems
The potential threats to U.S. water supply systems have changed fundamentally in the past 4 years. Prior to 2001, the major threats were natural causes, accidents, and some malicious behavior by a small group of individuals. Against these threats, water supply agencies have done a truly remarkable job of ensuring a safe, dependable supply. However, threats posed by an organized group of actors may represent a new and different challenge to the security of water supplies. A tool to assist in identifying possible attacks has been developed. Knowledge of these attack scenarios may help in designing countermeasures. The tool uses evolutionary computation as the optimization method, and EPANET as the system simulator. Examples of its use to identify effective physical attacks against a realistic but hypothetical pipe network and initial corresponding countermeasures are presented.
- 1 July 2005
- Published by American Society of Civil Engineers (ASCE)
- p. 1-11
Water Supply Threat Reduction Using Evolutionary Approaches
The potential threats to US water supply systems have changed fundamentally in the past four years. Prior to 2001, the major threats were natural causes, accidents, and some malicious behavior by a small group of individuals. Against these threats, water supply agencies have done a truly remarkable job of ensuring a safe, dependable supply. However, threats posed by an organized group of actors may represent a new and different challenge to the security of water supplies. A tool to assist in identifying possible attacks and simultaneously providing remedies to counter these attacks has been developed. The tool uses evolutionary computation as the optimization method, and EPANET as the system simulator. Preliminary examples of its use to identify optimal attacks against a realistic but hypothetical pipe network and corresponding counter measures are presented.
- 1 July 2005
- Published by American Society of Civil Engineers (ASCE)
- p. 1-11
Water Supply Threat Reduction Using Evolutionary Approaches
The potential threats to US water supply systems have changed fundamentally in the past four years. Prior to 2001, the major threats were natural causes, accidents, and some malicious behavior by a small group of individuals. Against these threats, water supply agencies have done a truly remarkable job of ensuring a safe, dependable supply. However, threats posed by an organized group of actors may represent a new and different challenge to the security of water supplies. A tool to assist in identifying possible attacks and simultaneously providing remedies to counter these attacks has been developed. The tool uses evolutionary computation as the optimization method, and EPANET as the system simulator. Preliminary examples of its use to identify optimal attacks against a realistic but hypothetical pipe network and corresponding counter measures are presented.
- 1 July 2005
- Published by American Society of Civil Engineers (ASCE) in Journal of Computing in Civil Engineering
- Vol. 19 (3) , 223-238
Evolutionary Design of Steel Structures in Tall Buildings
This paper presents results of a study on evolutionary computation in the design of the steel structural systems of tall buildings. It describes results of extensive research on both short-term (up to a few hundred generations) and long-term evolutionary design processes (at least a few thousand generations). The experiments were conducted with Inventor 2001, an evolutionary design support tool developed at George Mason University, for generating conceptual and detailed designs of steel structural systems in tall buildings. First, the paper discusses conceptual design of steel structural systems in tall buildings and briefly introduces Inventor 2001 as well as its design representation and evolutionary computation characteristics. Next, it provides the results obtained from systematic parametric design experiments conducted with Inventor 2001. The objective of these experiments was to qualitatively and quantitatively investigate evolution of steel structural systems of tall buildings during a multistage ...
- 1 July 2005
- Published by American Society of Civil Engineers (ASCE) in Journal of Computing in Civil Engineering
- Vol. 19 (3) , 223-238
Evolutionary Design of Steel Structures in Tall Buildings
This paper presents results of a study on evolutionary computation in the design of the steel structural systems of tall buildings. It describes results of extensive research on both short-term (up to a few hundred generations) and long-term evolutionary design processes (at least a few thousand generations). The experiments were conducted with Inventor 2001, an evolutionary design support tool developed at George Mason University, for generating conceptual and detailed designs of steel structural systems in tall buildings. First, the paper discusses conceptual design of steel structural systems in tall buildings and briefly introduces Inventor 2001 as well as its design representation and evolutionary computation characteristics. Next, it provides the results obtained from systematic parametric design experiments conducted with Inventor 2001. The objective of these experiments was to qualitatively and quantitatively investigate evolution of steel structural systems of tall buildings during a multistage ...
- 24 June 2005
- Published by American Society of Civil Engineers (ASCE)
- p. 1-12
Generative Representations in Structural Engineering
This paper proposes a new approach to representing structural system inspired by various models of complex systems. Several types of generative representations of steel structural systems are provided and empirically investigated. These representations utilize various kinds of cellular automata to generate design concepts of steel structures in tall buildings. In the paper, a brief overview of the state-of-the-art in cellular automata and generative design is presented. Next, several types of generative representations of steel structural systems in tall buildings are described. The paper also reports the results of several design experiments. They have shown that generative representations produce novel structural shaping patterns which are qualitatively different than the patterns obtained using traditionally used parameterized representations. They also significantly improve the performance of evolutionary algorithms optimizing the structural systems. Finally, research conclusions are presented and most promising paths of future research are discussed.
- 24 June 2005
- Published by American Society of Civil Engineers (ASCE)
- p. 1-12
Generative Representations in Structural Engineering
This paper proposes a new approach to representing structural system inspired by various models of complex systems. Several types of generative representations of steel structural systems are provided and empirically investigated. These representations utilize various kinds of cellular automata to generate design concepts of steel structures in tall buildings. In the paper, a brief overview of the state-of-the-art in cellular automata and generative design is presented. Next, several types of generative representations of steel structural systems in tall buildings are described. The paper also reports the results of several design experiments. They have shown that generative representations produce novel structural shaping patterns which are qualitatively different than the patterns obtained using traditionally used parameterized representations. They also significantly improve the performance of evolutionary algorithms optimizing the structural systems. Finally, research conclusions are presented and most promising paths of future research are discussed.
- 1 January 2004
- Published by Springer Nature
- p. 25-38
Morphogenic Evolutionary Design: Cellular Automata Representations in Topological Structural Design
- 1 January 2004
- Published by Springer Nature
- p. 25-38
Morphogenic Evolutionary Design: Cellular Automata Representations in Topological Structural Design
- 1 December 2000
- Published by Springer Nature in Engineering with Computers
- Vol. 16 (3-4) , 275-286
Evolutionary Computation in Structural Design
- 1 December 2000
- Published by Springer Nature in Engineering with Computers
- Vol. 16 (3-4) , 275-286
Evolutionary Computation in Structural Design