Rafal Kicinger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rafal Kicinger has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Tomasz Arciszewski
George Mason University
4 shared publications - Kenneth De Jong
George Mason University
3 shared publications - M. Bronzini
Department of Civil, Environmental and Infrastructure Engineering, George Mason University, 4400 University Drive, MS 4A6, Fairfax, VA, 22030
1 shared publication
Latest Publications
- 23 July 2007
- Published by American Society of Civil Engineers (ASCE)
- p. 399-410
Coevolutionary Structural Design for Robustness
This paper proposes a new nature-inspired method for achieving robustness of structural designs. In particular, biological processes of coevolution encoded in coevolutionary algorithms are proposed here to concurrently search the representation spaces of structural designs and of their loading cases, hi the proposed model, coevolutionary algorithms use two populations which competitively coevolve. The first population contains structural designs, while the second one contains loading cases. The quality of each individual structural design in the first population is determined by measuring how well it performs against the loading cases from the second population. On the other hand, the goodness of each loading case depends on the number of designs it "defeated," i.e., how many designs didn't succeed in satisfying design requirements (e.g., maximum internal forces, maximum displacement, etc.). This approach encourages generation of robust structural designs performing well against various loading cases. The proposed coevolutionary design method is illustrated by a simple demonstration problem of a welded beam design. The paper also presents initial research conclusions and discusses the most promising paths for future research.
- 23 July 2007
- Published by American Society of Civil Engineers (ASCE)
- p. 399-410
Coevolutionary Structural Design for Robustness
This paper proposes a new nature-inspired method for achieving robustness of structural designs. In particular, biological processes of coevolution encoded in coevolutionary algorithms are proposed here to concurrently search the representation spaces of structural designs and of their loading cases, hi the proposed model, coevolutionary algorithms use two populations which competitively coevolve. The first population contains structural designs, while the second one contains loading cases. The quality of each individual structural design in the first population is determined by measuring how well it performs against the loading cases from the second population. On the other hand, the goodness of each loading case depends on the number of designs it "defeated," i.e., how many designs didn't succeed in satisfying design requirements (e.g., maximum internal forces, maximum displacement, etc.). This approach encourages generation of robust structural designs performing well against various loading cases. The proposed coevolutionary design method is illustrated by a simple demonstration problem of a welded beam design. The paper also presents initial research conclusions and discusses the most promising paths for future research.
- 4 August 2006
- Published by American Society of Civil Engineers (ASCE)
Model of a Self-Organizing Traffic Management Hazard Response System
The terrorist attacks of September 11, 2001 and afterwards have caused renewed interest in developing effective policies and strategies for evacuating densely populated areas. The large-scale evacuations caused by Hurricane Katrina and other recent hurricane events have reinforced this need. Unfortunately, the current analytical tools for dealing with such evacuations are sorely lacking, in both theory and practice. The model and its computational implementation presented in this paper attempt to close this gap and make significant progress in traffic management and hazard response systems. The overall goal of this research is to develop a fundamental understanding of the evolutionary and emergent behavior of transportation systems that are operating under emergency evacuation conditions. Initial ideas on building conceptual models of evacuation scenarios utilizing cellular automata, evolutionary computation, and advanced traffic simulators were presented in the authors' previous paper. This paper describes computational implementations of proposed conceptual models. It also discusses preliminary results of several computational experiments in which the models were used to determine robust configurations of traffic control systems operating under emergency conditions. In these experiments, optimal evacuation strategies were sought for vehicles located within a representative urban area affected by various types of terrorist attacks.
- 4 August 2006
- Published by American Society of Civil Engineers (ASCE)
Model of a Self-Organizing Traffic Management Hazard Response System
The terrorist attacks of September 11, 2001 and afterwards have caused renewed interest in developing effective policies and strategies for evacuating densely populated areas. The large-scale evacuations caused by Hurricane Katrina and other recent hurricane events have reinforced this need. Unfortunately, the current analytical tools for dealing with such evacuations are sorely lacking, in both theory and practice. The model and its computational implementation presented in this paper attempt to close this gap and make significant progress in traffic management and hazard response systems. The overall goal of this research is to develop a fundamental understanding of the evolutionary and emergent behavior of transportation systems that are operating under emergency evacuation conditions. Initial ideas on building conceptual models of evacuation scenarios utilizing cellular automata, evolutionary computation, and advanced traffic simulators were presented in the authors' previous paper. This paper describes computational implementations of proposed conceptual models. It also discusses preliminary results of several computational experiments in which the models were used to determine robust configurations of traffic control systems operating under emergency conditions. In these experiments, optimal evacuation strategies were sought for vehicles located within a representative urban area affected by various types of terrorist attacks.
- 1 July 2005
- Published by American Society of Civil Engineers (ASCE) in Journal of Computing in Civil Engineering
- Vol. 19 (3) , 223-238
Evolutionary Design of Steel Structures in Tall Buildings
This paper presents results of a study on evolutionary computation in the design of the steel structural systems of tall buildings. It describes results of extensive research on both short-term (up to a few hundred generations) and long-term evolutionary design processes (at least a few thousand generations). The experiments were conducted with Inventor 2001, an evolutionary design support tool developed at George Mason University, for generating conceptual and detailed designs of steel structural systems in tall buildings. First, the paper discusses conceptual design of steel structural systems in tall buildings and briefly introduces Inventor 2001 as well as its design representation and evolutionary computation characteristics. Next, it provides the results obtained from systematic parametric design experiments conducted with Inventor 2001. The objective of these experiments was to qualitatively and quantitatively investigate evolution of steel structural systems of tall buildings during a multistage ...
- 1 July 2005
- Published by American Society of Civil Engineers (ASCE) in Journal of Computing in Civil Engineering
- Vol. 19 (3) , 223-238
Evolutionary Design of Steel Structures in Tall Buildings
This paper presents results of a study on evolutionary computation in the design of the steel structural systems of tall buildings. It describes results of extensive research on both short-term (up to a few hundred generations) and long-term evolutionary design processes (at least a few thousand generations). The experiments were conducted with Inventor 2001, an evolutionary design support tool developed at George Mason University, for generating conceptual and detailed designs of steel structural systems in tall buildings. First, the paper discusses conceptual design of steel structural systems in tall buildings and briefly introduces Inventor 2001 as well as its design representation and evolutionary computation characteristics. Next, it provides the results obtained from systematic parametric design experiments conducted with Inventor 2001. The objective of these experiments was to qualitatively and quantitatively investigate evolution of steel structural systems of tall buildings during a multistage ...
- 24 June 2005
- Published by American Society of Civil Engineers (ASCE)
- p. 1-12
Generative Representations in Structural Engineering
This paper proposes a new approach to representing structural system inspired by various models of complex systems. Several types of generative representations of steel structural systems are provided and empirically investigated. These representations utilize various kinds of cellular automata to generate design concepts of steel structures in tall buildings. In the paper, a brief overview of the state-of-the-art in cellular automata and generative design is presented. Next, several types of generative representations of steel structural systems in tall buildings are described. The paper also reports the results of several design experiments. They have shown that generative representations produce novel structural shaping patterns which are qualitatively different than the patterns obtained using traditionally used parameterized representations. They also significantly improve the performance of evolutionary algorithms optimizing the structural systems. Finally, research conclusions are presented and most promising paths of future research are discussed.
- 24 June 2005
- Published by American Society of Civil Engineers (ASCE)
- p. 1-12
Generative Representations in Structural Engineering
This paper proposes a new approach to representing structural system inspired by various models of complex systems. Several types of generative representations of steel structural systems are provided and empirically investigated. These representations utilize various kinds of cellular automata to generate design concepts of steel structures in tall buildings. In the paper, a brief overview of the state-of-the-art in cellular automata and generative design is presented. Next, several types of generative representations of steel structural systems in tall buildings are described. The paper also reports the results of several design experiments. They have shown that generative representations produce novel structural shaping patterns which are qualitatively different than the patterns obtained using traditionally used parameterized representations. They also significantly improve the performance of evolutionary algorithms optimizing the structural systems. Finally, research conclusions are presented and most promising paths of future research are discussed.
- 1 January 2004
- Published by Springer Nature
- p. 25-38
Morphogenic Evolutionary Design: Cellular Automata Representations in Topological Structural Design
- 1 January 2004
- Published by Springer Nature
- p. 25-38
Morphogenic Evolutionary Design: Cellular Automata Representations in Topological Structural Design