Adinath Eknath Kate
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Adinath Eknath Kate has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Debabandya Mohapatra
ICAR – Central Institute of Agricultural Engineering Bhopal India
6 shared publications - Bharat Modhera
Department of Chemical Engineering, Maulana Azad National Institute of Technology, Bhopal, India
4 shared publications - Manoj Kumar Tripathi
ICAR–Central Institute of Agricultural Engineering, Bhopal, India
3 shared publications N. C. Shahi
Department of PHPFE G. B. Pant University of Agriculture and Technology Pantnagar India
3 shared publicationsA. Sarkar
Department of Post Harvest Process and Food Engineering, College of Technology, Govind Ballabh Pant University of Agriculture and Technology, Pantnagar, U.S. Nagar, India
2 shared publications- Dilip Ananda Pawar
Agro‐Produce Processing Division ICAR‐Central Institute of Agricultural Engineering Bhopal India
2 shared publications
Latest Publications
- 11 October 2026
- Published by Wiley in Journal of Food Process Engineering
- Vol. 49 (10)
Shelf Life Extension and Quality Retention of Mango Under on‐Farm Hybrid Indirect–Direct Evaporative Cooling Storage System
Fresh fruits and vegetables experience significant postharvest losses due to their highly perishable nature, particularly in hot and dry climates where conventional refrigeration is often expensive and impractical for on‐farm use. This study presents the development and evaluation of a low‐cost, energy‐efficient indirect–direct hybrid evaporative cooling storage (HECS) system for short‐ to medium‐term on‐farm storage. The system maintains storage conditions of 18.3°C and 85.7% ± 1.4% relative humidity under ambient conditions of 40°C ± 2°C and 25% ± 2% RH. Its performance was assessed using Dasheri mango and compared with ambient and refrigerated storage. Quality changes, including physiological loss in weight (PLW), total soluble solids, carotenoids, firmness, titratable acidity, and color attributes, were significantly slower in HECS than under ambient storage. Based on the weight loss and selected measured quality attributes of the fruit, HECS extended mango shelf life to 16 days, compared with 14 days under refrigeration and only 3–4 days at ambient conditions, representing a fourfold increase over conventional storage. The 1‐t HECS unit costs approximately Rs. 3 lakhs and consumes only 1 kWh per tonne, making it an economically viable and sustainable alternative for farmers and rural entrepreneurs. The developed system offers an effective solution for reducing postharvest losses while improving marketability and income.
- 11 October 2026
- Published by Wiley in Journal of Food Process Engineering
- Vol. 49 (10)
Shelf Life Extension and Quality Retention of Mango Under on‐Farm Hybrid Indirect–Direct Evaporative Cooling Storage System
Fresh fruits and vegetables experience significant postharvest losses due to their highly perishable nature, particularly in hot and dry climates where conventional refrigeration is often expensive and impractical for on‐farm use. This study presents the development and evaluation of a low‐cost, energy‐efficient indirect–direct hybrid evaporative cooling storage (HECS) system for short‐ to medium‐term on‐farm storage. The system maintains storage conditions of 18.3°C and 85.7% ± 1.4% relative humidity under ambient conditions of 40°C ± 2°C and 25% ± 2% RH. Its performance was assessed using Dasheri mango and compared with ambient and refrigerated storage. Quality changes, including physiological loss in weight (PLW), total soluble solids, carotenoids, firmness, titratable acidity, and color attributes, were significantly slower in HECS than under ambient storage. Based on the weight loss and selected measured quality attributes of the fruit, HECS extended mango shelf life to 16 days, compared with 14 days under refrigeration and only 3–4 days at ambient conditions, representing a fourfold increase over conventional storage. The 1‐t HECS unit costs approximately Rs. 3 lakhs and consumes only 1 kWh per tonne, making it an economically viable and sustainable alternative for farmers and rural entrepreneurs. The developed system offers an effective solution for reducing postharvest losses while improving marketability and income.
- 29 October 2025
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 20 (1) , 730-741
Comparative analysis of various pretreatments vis-à-vis Infrared heating on some selected quality characteristics of kodo millet
- 29 October 2025
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 20 (1) , 730-741
Comparative analysis of various pretreatments vis-à-vis Infrared heating on some selected quality characteristics of kodo millet
- Open Access
Spotting of Volatile Signatures through GC-MS Analysis of Bacterial and Fungal Infections in Stored Potatoes (Solanum tuberosum L.)
Potatoes inoculated with Pectobacterium carotovorum spp., Aspergillus flavus and Aspergillus niger, along with healthy (control) samples, were stored at different storage temperatures (4 ± 1 °C, 8 ± 1 °C, 25 ± 1 °C) for three weeks. Volatile organic compounds (VOCs) were mapped using the headspace gas analysis through solid phase micro extraction–gas chromatography–mass spectroscopy every week. The VOC data were arranged into different groups and classified using principal component analysis (PCA) and partial least square discriminant analysis (PLS-DA) models. Based on a variable importance in projection (VIP) score > 2 and the heat map, prominent VOCs were identified as 1-butanol and 1-hexanol, which can act as biomarkers for Pectobacter related bacterial spoilage during storage of potatoes in different conditions. Meanwhile, hexadecanoic acid and acetic acid were signature VOCs for A. flavus, and hexadecane, undecane, tetracosane, octadecanoic acid, tridecene and undecene were associated with A. niger. The PLS-DA model performed better at classifying the VOCs of the three different species of infection and the control sample compared to PCA, with high values of R2 (96–99%) and Q2 (0.18–0.65). The model was also found to be reliable for predictability during random permutation test-based validation. This approach can be adopted for fast and accurate diagnosis of pathogenic invasion of potatoes during storage.
Open AccessSpotting of Volatile Signatures through GC-MS Analysis of Bacterial and Fungal Infections in Stored Potatoes (Solanum tuberosum L.)
Potatoes inoculated with Pectobacterium carotovorum spp., Aspergillus flavus and Aspergillus niger, along with healthy (control) samples, were stored at different storage temperatures (4 ± 1 °C, 8 ± 1 °C, 25 ± 1 °C) for three weeks. Volatile organic compounds (VOCs) were mapped using the headspace gas analysis through solid phase micro extraction–gas chromatography–mass spectroscopy every week. The VOC data were arranged into different groups and classified using principal component analysis (PCA) and partial least square discriminant analysis (PLS-DA) models. Based on a variable importance in projection (VIP) score > 2 and the heat map, prominent VOCs were identified as 1-butanol and 1-hexanol, which can act as biomarkers for Pectobacter related bacterial spoilage during storage of potatoes in different conditions. Meanwhile, hexadecanoic acid and acetic acid were signature VOCs for A. flavus, and hexadecane, undecane, tetracosane, octadecanoic acid, tridecene and undecene were associated with A. niger. The PLS-DA model performed better at classifying the VOCs of the three different species of infection and the control sample compared to PCA, with high values of R2 (96–99%) and Q2 (0.18–0.65). The model was also found to be reliable for predictability during random permutation test-based validation. This approach can be adopted for fast and accurate diagnosis of pathogenic invasion of potatoes during storage.
- 25 March 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (17) , 23779-23794
Sequential ultrasound-microwave-assisted extraction of tuberose (Polianthes tuberosa L.) concrete: the effect of processing parameters on yield, volatile metabolite profiles, and functional groups
- 25 March 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (17) , 23779-23794
Sequential ultrasound-microwave-assisted extraction of tuberose (Polianthes tuberosa L.) concrete: the effect of processing parameters on yield, volatile metabolite profiles, and functional groups
- 27 January 2023
- Published by Elsevier
- p. 617-633
Biosensor: fundamentals, biomolecular component, and applications
- 27 January 2023
- Published by Elsevier
- p. 617-633
Biosensor: fundamentals, biomolecular component, and applications
- 1 February 2022
- Published by Elsevier in Postharvest Biology and Technology
- Vol. 184, 111761
Biological relevance of VOCs emanating from red onions infected with Erwinia (Pectobacterium) carotovora under different storage conditions
- 1 February 2022
- Published by Elsevier in Postharvest Biology and Technology
- Vol. 184, 111761
Biological relevance of VOCs emanating from red onions infected with Erwinia (Pectobacterium) carotovora under different storage conditions
- 21 September 2021
- Published by Springer Nature in Journal of Food Science and Technology
- Vol. 59 (6) , 2448-2459
Development and evaluation of onion bulb descaler for removal and collection of surface dry peel
Onion bulbs contain outer papery dry peel which is rich with industrially important high-value compounds. Removal of dry peel/scale of onion is the common practice during bulb processing, storage and marketing. A conventional manual method of scale removal involves huge labour, drudgery and means of environmental pollution. An onion descaler machine has been therefore developed to mechanize this operation, reduce drudgery and effectively collect the dry scales for industrial use. The operating parameters of the developed machine were optimized for its best performance using RSM. During optimization study, roller speed, roller slope and hopper opening were taken as independent variables. The performance of the machine was evaluated through descaling efficiency and descaling loss. During experimentation, descaling efficiency and descaling loss were obtained in the range of 35.92–98.55% and 0.82–9.07%. The optimum performance of the machine was obtained at 450 rpm roller speed, 2% roller slope and 380 mm of the hopper opening with maximum descaling efficiency (88.29%) and minimum descaling loss (3.65%). The optimization of the onion descaler parameters and their statistical relation provided the necessary information on the combination of material-machine alignment, and design parameters for enhanced descaling efficiency.
- 21 September 2021
- Published by Springer Nature in Journal of Food Science and Technology
- Vol. 59 (6) , 2448-2459
Development and evaluation of onion bulb descaler for removal and collection of surface dry peel
Onion bulbs contain outer papery dry peel which is rich with industrially important high-value compounds. Removal of dry peel/scale of onion is the common practice during bulb processing, storage and marketing. A conventional manual method of scale removal involves huge labour, drudgery and means of environmental pollution. An onion descaler machine has been therefore developed to mechanize this operation, reduce drudgery and effectively collect the dry scales for industrial use. The operating parameters of the developed machine were optimized for its best performance using RSM. During optimization study, roller speed, roller slope and hopper opening were taken as independent variables. The performance of the machine was evaluated through descaling efficiency and descaling loss. During experimentation, descaling efficiency and descaling loss were obtained in the range of 35.92–98.55% and 0.82–9.07%. The optimum performance of the machine was obtained at 450 rpm roller speed, 2% roller slope and 380 mm of the hopper opening with maximum descaling efficiency (88.29%) and minimum descaling loss (3.65%). The optimization of the onion descaler parameters and their statistical relation provided the necessary information on the combination of material-machine alignment, and design parameters for enhanced descaling efficiency.
- 16 September 2020
- Published by Wiley in Journal of Food Science
- Vol. 85 (10) , 3406-3414
Mass transfer dynamics of simultaneous water gain and solid loss during soaking of pigeon pea grains
Pigeon pea is the most prominently used protein source for human consumption. This is one of the leading pulse utilized in various applications in food processing. Soaking is one of the mandatory unit operation required to convert it from raw to a consumable form. Insights into its mass transfer dynamics enable the design and optimization of processing conditions with due consideration of retention of its quality and nutrition. In the present investigation, the mass transfer dynamics of simultaneous water gain and solid loss taking place during soaking was studied . The experimental samples were soaked at 35, 50, 75, 85, and 100 °C to represent the lower and upper gelatinization temperatures. The water diffusivities varied from 5.492 × 10 −10 to 13.84 × 10 −10 m²/s when soaking temperature was increased from 35 to 100 °C. Similarly, solid diffusivities vary between 6.27 × 10 −10 at 35 °C and 9.48 × 10 −10 m²/s at 100 °C. The activation energies of both the phenomenon were estimated using the Arrhenius equation. The mass transfer process has been identified with three distinct stages. The first stage was characterized by void filling, expansion, and solid hydration. The second stage was marked at 5% of solid loss and characterized by solid loss, while the third stage contributed to the starch gelatinization process. Simultaneous water gain and solid loss in the grain was observed throughout the process at varying rates. The insights into mass transfers from this study can help in further modeling of pigeon pea soaking behavior. Practical Application: Soaking is one of the mandatory step for further utilization of legume grains. Various desirable and undesirable changes take place during the soaking process. Pigeon pea being a leading legume, understanding of the dynamics of various chemical, physical, and compositional changes during soaking is very much required for a process design. Also the representation of these behaviors in mathematical models is essential to further understand and optimize the operations for maximum retention of quality attributes, minimum wastage, and low‐energy consumption.
- 16 September 2020
- Published by Wiley in Journal of Food Science
- Vol. 85 (10) , 3406-3414
Mass transfer dynamics of simultaneous water gain and solid loss during soaking of pigeon pea grains
Pigeon pea is the most prominently used protein source for human consumption. This is one of the leading pulse utilized in various applications in food processing. Soaking is one of the mandatory unit operation required to convert it from raw to a consumable form. Insights into its mass transfer dynamics enable the design and optimization of processing conditions with due consideration of retention of its quality and nutrition. In the present investigation, the mass transfer dynamics of simultaneous water gain and solid loss taking place during soaking was studied . The experimental samples were soaked at 35, 50, 75, 85, and 100 °C to represent the lower and upper gelatinization temperatures. The water diffusivities varied from 5.492 × 10 −10 to 13.84 × 10 −10 m²/s when soaking temperature was increased from 35 to 100 °C. Similarly, solid diffusivities vary between 6.27 × 10 −10 at 35 °C and 9.48 × 10 −10 m²/s at 100 °C. The activation energies of both the phenomenon were estimated using the Arrhenius equation. The mass transfer process has been identified with three distinct stages. The first stage was characterized by void filling, expansion, and solid hydration. The second stage was marked at 5% of solid loss and characterized by solid loss, while the third stage contributed to the starch gelatinization process. Simultaneous water gain and solid loss in the grain was observed throughout the process at varying rates. The insights into mass transfers from this study can help in further modeling of pigeon pea soaking behavior. Practical Application: Soaking is one of the mandatory step for further utilization of legume grains. Various desirable and undesirable changes take place during the soaking process. Pigeon pea being a leading legume, understanding of the dynamics of various chemical, physical, and compositional changes during soaking is very much required for a process design. Also the representation of these behaviors in mathematical models is essential to further understand and optimize the operations for maximum retention of quality attributes, minimum wastage, and low‐energy consumption.
- 23 August 2020
- Published by Wiley in Journal of Food Process Engineering
- Vol. 43 (10)
Modeling and kinetics of microwave assisted leaching based oil extraction from Bhat
A polar green solvent based Microwave assisted oil extraction from low oil content source like bhat seed is one of the novel and sustainable approach. The understanding of exact mechanism of mass transfer and hence oil extraction is vital for its industrial scale application. The kinetics of oil extraction and their modeling is carried out in present investigation. The MAE of oil from different size particles (bhat seed sample was carried out through isopropanol as solvent. Fick's law based model and two stage (washing and diffusion) extraction based empirical model was fitted to the experimental data. Fick's law shown the best fit to all three particle sizes with R2 .98, .98, and .97, respectively. The diffusion rate was observed to be decreased from 0.54 to 0.26 min−1 with increase in particle size. Empirical model shown that the washing stage was most predominant over diffusion with extraction rate few hundred times the diffusion.Practical Application: In recent years, microwave assisted extraction (MAE) attracts the industrial interest because of various advantages. But, the phenomenon of MAE is considerably different than conventional solvent extraction. The understanding of insight in to the process of mass transfer kinetics taking place during extraction is the key requirement for design and scale‐up of the extraction system. Therefore, the present investigation understands the mass transfer and extraction dynamics taking place at molecular level especially in low oil content source, which will help for large‐scale commercial design of MAE systems.
- 23 August 2020
- Published by Wiley in Journal of Food Process Engineering
- Vol. 43 (10)
Modeling and kinetics of microwave assisted leaching based oil extraction from Bhat
A polar green solvent based Microwave assisted oil extraction from low oil content source like bhat seed is one of the novel and sustainable approach. The understanding of exact mechanism of mass transfer and hence oil extraction is vital for its industrial scale application. The kinetics of oil extraction and their modeling is carried out in present investigation. The MAE of oil from different size particles (bhat seed sample was carried out through isopropanol as solvent. Fick's law based model and two stage (washing and diffusion) extraction based empirical model was fitted to the experimental data. Fick's law shown the best fit to all three particle sizes with R2 .98, .98, and .97, respectively. The diffusion rate was observed to be decreased from 0.54 to 0.26 min−1 with increase in particle size. Empirical model shown that the washing stage was most predominant over diffusion with extraction rate few hundred times the diffusion.Practical Application: In recent years, microwave assisted extraction (MAE) attracts the industrial interest because of various advantages. But, the phenomenon of MAE is considerably different than conventional solvent extraction. The understanding of insight in to the process of mass transfer kinetics taking place during extraction is the key requirement for design and scale‐up of the extraction system. Therefore, the present investigation understands the mass transfer and extraction dynamics taking place at molecular level especially in low oil content source, which will help for large‐scale commercial design of MAE systems.