DPDilip Ananda Pawar

Dilip Ananda Pawar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dilip Ananda Pawar has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Shelf Life Extension and Quality Retention of Mango Under on‐Farm Hybrid Indirect–Direct Evaporative Cooling Storage System

    by Shukadev Mangaraj, Adinath Eknath Kate, Dilip Ananda Pawar, Anchal Jaiswal, Rajeev Ranjan Thakur

    Fresh fruits and vegetables experience significant postharvest losses due to their highly perishable nature, particularly in hot and dry climates where conventional refrigeration is often expensive and impractical for on‐farm use. This study presents the development and evaluation of a low‐cost, energy‐efficient indirect–direct hybrid evaporative cooling storage (HECS) system for short‐ to medium‐term on‐farm storage. The system maintains storage conditions of 18.3°C and 85.7% ± 1.4% relative humidity under ambient conditions of 40°C ± 2°C and 25% ± 2% RH. Its performance was assessed using Dasheri mango and compared with ambient and refrigerated storage. Quality changes, including physiological loss in weight (PLW), total soluble solids, carotenoids, firmness, titratable acidity, and color attributes, were significantly slower in HECS than under ambient storage. Based on the weight loss and selected measured quality attributes of the fruit, HECS extended mango shelf life to 16 days, compared with 14 days under refrigeration and only 3–4 days at ambient conditions, representing a fourfold increase over conventional storage. The 1‐t HECS unit costs approximately Rs. 3 lakhs and consumes only 1 kWh per tonne, making it an economically viable and sustainable alternative for farmers and rural entrepreneurs. The developed system offers an effective solution for reducing postharvest losses while improving marketability and income.

  • Shelf Life Enhancement and Phytochemical Stability of Mango Stored Under On‐Farm Earth Air Heat Exchanger Cum Evaporative Cool System

    by Shukadev Mangaraj, Rajeev Ranjan Thakur, Ranjeet Kumar, Praween Nishad, Dilip Ananda Pawar, Aman Kumar, Adinath Eknath Kate

    An Earth Air Heat Exchanger cum Evaporative Cool System (EAHE‐ECS) was developed and evaluated for short‐term mango storage. During storage, the ambient temperature ranged between 27°C and 44°C, while the EAHE‐ECS maintained a lower temperature of 22°C–23°C, indicating its effectiveness. Mangoes were assessed at 3‐day intervals under room and EAHE‐ECS conditions for physicochemical and phytochemical characteristics. Results revealed that weight loss, total soluble solids, pH, carotenoid, and antioxidant content increased progressively in both conditions, but the increments were lower in EAHE‐ECS. Specifically, weight loss ranged from 9.82% to 38.12% at room temperature compared to 3.83%–8.67% in EAHE‐ECS. The total soluble solids rose to 19.44°Brix under room conditions and 16.56°Brix in EAHE‐ECS. In contrast, firmness, hue angle, titratable acidity, ascorbic acid, and total phenolic content declined during storage, though the reduction was slower in EAHE‐ECS. For instance, firmness decreased to 2.90 N at room temperature but, it was 13.21 N in EAHE‐ECS by the end of the storage period. Overall, EAHE‐ECS significantly extended mango shelf life up to 12 days, compared to only 3–4 days under ambient storage. The study highlights EAHE‐ECS as a cost‐effective and sustainable technology with strong potential for reducing postharvest losses of mango and other horticultural produce in India.


  • Open Access

    Drying Kinetics and Mathematical Modelling of Raisin Production by Abrasive and Chemical Pre-Treatment of Grapes

    by Pawar Dilip Ananda, Giri Saroj Kumar, Sharma Ajay Kumar

    One of the delicious dry fruit, raisin is obtained by drying of grapes with pre-drying treatment. Chemical pre-treatment is most commonly followed for the raisin processing. However, it has drawback like extended drying time and it also triggers the food safety concerns. Various alternatives are being explored for the production of safe raisins. In the present investigation, drying kinetics of grapes and modelling of raisin production have been studied. Grapes were pre-treated with conventional chemical method and novel abrasive method and compared. Treated grapes were dried in tray dryer and solar dryer. Drying kinetics and modelling of experimental data was examined with ten empirical drying equations. Drying rate was higher for grapes treated with abrasive method compared to chemical pre-treatment. Among the different drying conditions, tray drying (55°C) and solar drying (temperature range 43.33 to 58.33°C) was found suitable for superior quality raisin production with drying time of 56.66 h and 78.5 h, respectively. The browning index and firmness of raisins produced using abrasive pre-treatment was to some extent higher compared to chemical treatment whereas yellowness index was found slightly lesser in case of abrasive treated samples. The Modified Handerson-Pebis Model fitted best to predict the drying of abrasive treated grapes, whereas Two term model reported highest goodness of fit for chemically treated grapes. Effective diffusivity for moisture removal of grapes ranged between 1.03×10−9 to 5.52×10−10 m2/s and was maximum for abrasive treated grapes. Present findings of drying behaviour of grapes and modelling will be useful for the better design of drying systems for production of safe raisins using novel abrasive pre-treatment.


  • Developments and opportunities in minimal processing and production of tender jackfruit flour

    by Dilip Ananda Pawar, Saroj Kumar Giri

    Tender jackfruit is quite popular for culinary preparations. Technologies and value-added products of matured and ripened jackfruit are in the commercial domain, but there is a high demand to work on the processing and value addition of tender jackfruit. Especially, interventions are required for the mechanization of different post-harvest operations and to develop process protocols. Minimal processing of tender jackfruit has immense commercial potential as it can make handling easy and reduce transportation costs. Controlling the browning of cut tender jackfruit is a challenge and requires research interventions to develop a safe process protocol minimizing or avoiding the use of chemicals. Tender jackfruit powder, also called flour, is a novel product being invented to explore its possible applications in different food products. However, scientific interventions are required to develop a process protocol for tender jackfruit powder production along with the development of machines for operations like shredding and grinding. Conventional grinding operations lead to nutritional loss of jackfruit powder; hence, there is a great opportunity to develop a low-temperature grinding system for the production of quality powder. The available literature, particularly on tender jackfruit processing, has been summarized in the present paper with its critical analysis and future prospects. Graphical abstract


  • Novel alternative pretreatment approaches for production of quality raisins from grapes: Opportunities and future prospects

    by Dilip A. Pawar, Saroj K. Giri, Ajay K. Sharma

    Raisins are high‐value products obtained by drying grape berries. Natural drying of grapes is difficult because a hydrophobic waxy cuticle is present on the berry surface. Pretreatment is an important operation in raisin production in which the waxy layer is dissolved or removed for enhancing the drying rate of grapes. Chemical pretreatment consisting of dipping grape bunches in a solution of alkali and oil emulsion is commonly followed for raisin production. However, the threat of chemicals to human health, the environment, and longer processing time lead to the development of an alternative to chemical pretreatment. Various alternative methods have been explored including the abrasive pretreatment and some novel thermal and nonthermal techniques. The potential of these alternative pretreatments has been discussed in this review along with a critical analysis of literature on grape drying. The fundamentals of grape drying and unit operations of the chemical and abrasive process of raisin production have also been narrated. An abrasive process as the best alternative to chemicals in raisin production has been described in detail along with future prospects of different physical pretreatments. This review provides comprehensive information on raisin production with a focus on chemical‐free processing of grape for raisin production.Practical applications: Raisins are dried grapes rich in nutritional and functional ingredients that are beneficial for human health. A predrying treatment to remove or to dissolve the waxy layer from surface of grapes is an important operation in raisin production. The chemical method of pretreatment is prevalent among raisin processors. However, a chemical method has some limitations like longer processing time, intense use of chemicals, food safety issues, and so forth. Many novel pretreatments like superficial abrasion, thermal, and nonthermal techniques have been explored by researchers and it has the potential to produce safe raisins without use of any chemicals. These alternative techniques can be adopted for industrial‐scale processing of raisins. A lot of literature is available on the grape drying process, modeling, and quality aspects of raisins. All this information has been summarized in this comprehensive review with a comparison of unit operations, analysis of findings, and future aspects for the production of safe raisins. This review will be very useful for industrial‐scale processing of raisins adopting novel processes and it will also provide in‐depth knowledge to the academician and research scholars.


  • Development and performance evaluation of grape debunching machine for production of raisins and stemless table grapes

    by Dilip A. Pawar, Saroj K. Giri, Ajay K. Sharma

    Chemical pretreatment before drying is a practice in raisin making which has many limitations and use of chemical shall be discouraged. A new process is being developed with physical pretreatment. The process requires intact grape berries for further processing. Therefore, a grape debunching machine has been developed for separation of intact berries from the bunch. The machine consists of central rotor with helical fingers. The rotor assembly is surrounded by perforated trough through which the detached berries drop. The performance of the machine was evaluated with “Thompson Seedless” table grape for debunching efficiency and damage to berries. The rotor speed (80–120 rpm) and concave clearance (5–25 mm) were selected as independent parameters. The debunching efficiency and percentage of damaged berry were in the range of 77.17–98.73% and 5.75–11.82%, respectively. The maximum debunching efficiency (94.33%) and minimum berry damage (7.10%) was obtained at rotor speed of 100 rpm and concave clearance of 15 mm. The capacity of grape debunching machine was found to be 145.2–150.2 kg/hr for different grape varieties, namely Thompson Seedless, Manik Chaman, and Fantasy Seedless. The developed machine will be useful in production of raisins without use of chemicals and stemless table grapes.Practical applications: The conventional process of raisin making involves intensive use of chemicals right from dipping of harvested grape bunch in a solution of ethyl oleate (1.5%) and potassium carbonate (2.5%), intermittent sprays, and further use of booster and sulfur dioxide for color improvement. The intensive use of chemicals triggers the food safety issues. Furthermore, the process requires longer drying time, involves more number of unit operations, and fetches losses of grapes. To address these issues, an alternative chemical‐free process has been developed by the authors of this investigation for the production of raisins. This process requires the grape berries to be individualized before further processing which is tedious and time consuming if done manually. Therefore a grape de‐bunching machine has been developed for separation of intact grape berries which can be further processed into raisins at industrial scale without use of chemicals. The developed machines will find applications in the minimally processed/individual quick freezing (IQF) of table grapes for which there is an increasing market especially in super market.


  • Open Access

    Effect of abrasive pre‐treatment on drying rate of grape berries and raisin quality

    by Dilip Ananda Pawar, Saroj Kumar Giri, Ajay Kumar Sharma, Nachiket Kotwaliwale


  • Airflow resistance and pressure drop behavior in different conditions of bulk‐stored onion and its dynamic modeling

    by Adinath E. Kate, Subir K. Chakraborty, Dilip A. Pawar, Kalyani Gorrepati

    The knowledge of airflow resistance and distribution pattern in a highly porous‐bed commodity like an onion is an important consideration in designing an appropriate ventilation system and for proper selection of fans. The resistance to airflow through bulk onions was determined at the airflow rates range of 0.04–1.0 m3/s.m2, bed depth of 0–100 cm, and scaled and descaled condition of onion at vertical and horizontal position of the onion stock. Three models (Shedd, Hukill and Ives, and Ergun) were investigated to describe pressure drop data of onion bulbs. The pressure drop through bulk onion was increased with an increase in airflow rate and bed depth. Also, pressure drop was 43.5 and 33.3% higher in scaled condition over the descaled condition of bulbs at the vertical and horizontal position of the column, respectively. Shedd model was found to more reliable among three models to describe airflow resistance in bulk of onion bulbs.Practical Applications: Onion is perishable vegetable consumed throughout the year. Being a seasonal crop and to fulfill the demand of consumers it must be stored for off seasonal use. Storage of the onion bulbs at ambient and modified environment condition is the most commonly used methods in a tropical climate. But there were huge postharvest losses mainly in the form of physiological weight loss, sprouting, and decay and considerable loss in nutritional qualities. Properly designed aeration, ventilation, and fumigation system is the only way to reduce such losses. Therefore, the understanding of dynamic behavior of applied ventilation and fumigation with its distribution pattern in a highly porous commodity like an onion is a preliminary requirement for the proper design of storage system. Different model based approach to understand flow dynamics could be used in the dimensional design of a storage system in a tropical climate.