EVElena Valer'Yevna Vorobyova

Elena Valer'Yevna Vorobyova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Elena Valer'Yevna Vorobyova has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Relationship of Luminescent, Thermo-Oxidative and Photocatalytic Properties of ZnO Micro and Nanostructures

    by Makhach Gadzhiev, Elena Vorobyova, Valeriya Krasnova, Nadezhda Aluker, Arsen Muslimov, Sergey Antipov, Maksim Il’Ichev, Yury Kulikov, Andrey Chistolinov, Damir Yusupov, et al.

    In this work, a comprehensive analysis of the relationship between photoluminescent, thermo-oxidative, and photocatalytic (upon simulated sunlight exposure) properties of ZnO powders is performed. The correlation between the X-ray diffraction and microscopic data is studied. ZnO powders of various sizes and morphologies were used: pseudo-spherical nanoparticles (30–50 nm), submicron faceted crystallites (100–500 nm), and plate- and rod-like microstructures (up to 20 μm). The mean specific surface area values were 32 m2/g, 3.8 m2/g, and 2.6 m2/g for pseudo-spherical nanoparticles, submicron faceted crystallites, and plate- and rod-like microstructures, respectively. According to the XRD data, microstresses and carbon-based impurities were present in ZnO nanoparticles, which is characteristic of nanomaterials synthesized at low temperatures. According to the photoluminescence spectroscopy data, the emission in ZnO was reduced due to high defectiveness, and characteristic emission bands indicated the presence of organic impurities. Upon long signal registration times, an intensive luminescence band with an effective maximum at 579 nm occurred, which indicated the presence of long-term components exhibiting decay times τ ~300 μs. According to the XRD data, the crystal structure parameters of ZnO submicro- and microparticles were close, with no impurities present. In their photoluminescence spectra, pronounced UV and defect-related bands were present with intensity ratios of 11.6 and 6.88, respectively. The decrease in the UV and defect-related luminescence band intensity ratios indicates deviation from the stoichiometry toward an increased Zn over oxygen content. At long signal registration times, in submicron ZnO particles, a luminescence band with maxima at 425 and 490 nm is present, which decays rapidly. An emission band in the 530 nm region is also present, which decays for ≤80 μs, and a weak long-wavelength emission decaying for ~100 μs. At long delay and strobe times (up to milliseconds), only an emission in the 460 nm region is observed, which we connect to the triplet–singlet transition of a defect center (F*, F+*). At lower intensities, an emission connected to the surface contamination by organic impurities is observed. In photoluminescence spectra of ZnO microparticles, no long-wavelength emission components are observed. However, upon immersing into methylene blue solution, a modification of the surface and UV region of the spectra is observed with signs of charge carrier recombination rate acceleration. It is shown that the catalytic action of ZnO powders in polyethylene thermo-oxidation processes is determined by a combination of factors. In addition to dispersity and concentration, which are the key parameters, the morphology of ZnO particles, the presence of impurities, the surface state, and the distribution of active sites have a significant influence on catalysis. It has been experimentally demonstrated that these secondary factors can markedly affect the rate of radical formation in polyethylene films and alter their resistance to oxidation. ZnO nanoparticles exhibited low catalytic activity in both photocatalysis (rate constant 0.146 min−1) and thermocatalysis due to the high defect density of the crystallites and the presence of carbon-containing impurities. Submicron ZnO particles, owing to a high carrier generation rate and suppressed recombination (via trapping), demonstrated the highest photoactivity (rate constant 0.729 min−1). Submicron ZnO particles exhibit a catalytic effect on the thermo-oxidation of polyethylene (PE films); however, at concentrations above 8 wt.% a transition to an inhibiting effect is observed. ZnO microparticles catalyzed the oxidation of PE films over a broader concentration range (1–12 wt.%), with oxidation inhibition observed only at 18 wt.%. At the same time, they demonstrated moderate photocatalytic activity (rate constant 0.256 min−1). These characteristics of the samples correlate with data obtained by microscopy, photoluminescence spectroscopy, and X-ray diffraction analysis.

  • Open Access

    CHANGES IN THE ANTIOXIDANT ACTIVITY OF ORGANIC PLANT EXTRACTS DURING STORAGE AND THEIR USE AS ADDITIVES FOR POLYETHYLENE

    by Elena Valeryevna Vorobyova

    In this study, aqueous and organic extracts were obtained from plants growing in natural populations on the territory of Belarus: common hop (Humulus lupulus L.), lemon balm (Melissa officinalis L.), peppermint (Mentha × piperita L.), and bilberry (Vaccinium myrtillus L.). Aqueous extracts were prepared using a water bath at a temperature of 65±5 °C for 30 minutes. Acetone, ethanol, and ethyl acetate were used as organic solvents, maceration was carried out for 48 hours at 25±2 °C. The ratio of plant material to solvent volume was 0.5 : 5 (g/cm3) for both aqueous and organic extractions. The extracts were stored for 2 months under natural light in a day-night cycle. Antioxidant activity (AOA) of the extracts was evaluated potentiometrically using the mediator system K3[Fe(CN)6]/K4[Fe(CN)6]. The AOA of plant extracts is determined both by the chemical specificity of the raw material and the polarity of the solvent employed. Aqueous extracts exhibited the following AOA hierarchy across plant species: Melissa officinalis >> Mentha piperita > Humulus lupulus > Vaccinium myrtillus. For acetone extracts, the sequence shifted: Mentha piperita > Vaccinium myrtillus > Melissa officinalis > Humulus lupulus; in ethanol extracts, AOA values were comparable for Mentha piperita and Melissa officinalis, while Vaccinium myrtillus and Humulus lupulus showed no significant difference (p > 0.05). Ethyl acetate extracts displayed the lowest AOA levels, ranging narrowly from 1 to 4 mmol eq/L. Despite marked differences in plant metabolite profiles and initial AOA values of the extracts, dynamic changes in AOA during storage revealed consistent trends across all samples. During the storage of aqueous extracts, a significant increase in AOA was observed within the first 1–2 days. However, by days 3–4, AOA dropped sharply, followed by a gradual decline to nearly zero values over approximately 40 days. During the storage of acetone and ethanol extracts, two distinct stages in the dynamics of AO) were observed. The first stage, characterized by a rapid decline in AOA, lasted for the initial 10–15 days of storage. The second stage was marked by a slower rate of AOA decrease, with a duration extending to 50 days or more. It was established that, for both acetone and ethanol extracts, the temporal changes in AOA at each stage followed a first-order kinetic model, which demonstrated the best fit with higher coefficients of determination. In contrast, ethyl acetate extracts exhibited a slight increase in AOA during the first 5–10 days of storage. The obtained organic extracts were applied as antioxidant additives in polyethylene films. A correlation between the AOA of the extracts and the oxidation induction period (OIT) of polyethylene films containing these extracts was observed only for the acetone extracts. The article provides explanations for the identified patterns.

  • Open Access

    FEATURES OF MANIFESTATION OF ANTIOXIDANT PROPERTIES OF HYDROLYSIS LIGNIN IN POLYETHYLENE FILMS, ANTAGONISM OF LIGNIN AND LICHEN EXTRACTS

    by Elena Valerievna Vorobyova

    The work experimentally studied the antioxidant properties of hydrolyzed lignin powder in the composition of polyethylene films, showing the possibility of increasing the antioxidant capacity of lignin powder in the polymer matrix due to the adsorption of compounds with antioxidant properties on its surface. Samples of polyethylene films with a lignin content of 1–7% wt. obtained by thermal pressing. Thermal-oxidative testing of polymer films was carried out at a temperature of 150 °C. Monitoring of the oxidation process was carried out by IR spectroscopy, using the absorption band at 1720 cm-1, which corresponds to carbonyl groups. Experiments on adsorption of ascorbic acid and resorcinol (weak antioxidants) on the surface of lignin particles were carried out. An increase in the antioxidant properties of modified lignin in the composition of polyethylene films was noted. Lignin modification with Evernia prunastri lichen extracts; Parmelia sulcata; Hypogymnia physodes led to antagonism (negative synergism) of antioxidant properties in the polymer composition: the thermal-oxidative stability of the experimental polymer films turned out to be extremely low. At the same time, the extracts of the lichens Evernia prunastri, Parmelia sulcata, Hypogymnia physodes themselves exhibit high antioxidant activity in the composition of polyethylene films. The ATR spectra of lignin powders and UV/VIS spectra of lichen extracts were studied before and after mutual contacting. Analysis of the spectra indicates a decrease in the number of oxygen-containing groups of lignin, which determine its antioxidant capacity.

  • Open Access

    ANTIOXIDANT PROPERTIES OF THE FOMITOPSIS PINICOLA TRUNE EXTRACT IN THE COMPOSITION OF POLYETHYLENE FILMS

    by Elena Valerievna Vorobyova

    Scientific literature shows that the thallus of Fomitopsis pinicola is sufficiently rich in secondary metabolites with pronounced antioxidant properties. However, the experiments showed that ethanol extracts of F. pinicola compared with extracts of higher plants (for example, Chelidonium majus) were characterized by low antioxidant properties, both in the polymer composition and according to biochemical analysis. The induction period of oxidation of polyethylene films with extracts of F. pinicola was 3.25 times lower than the induction period of oxidation of similar polymer films with C. majus extracts. It is assumed that this result is a consequence of the presence of most phenolic compounds of F. pinicola within melanins. In the composition of these pigments, phenolic compounds are sedentary and cannot diffuse in the polymer melt. In addition, a number of reactive functional groups will not exhibit their antioxidant properties because of spatial difficulties. Extraction conditions (extractant, time), under which the obtained F. pinicola extracts confirm high antioxidant properties in polyethylene films, significantly exceeding the antioxidant properties of C. majus extracts, were experimentally determined during the studies. It is shown that to obtain highly effective antioxidant F. pinicola extracts for polymer stabilization it is most rational to use acetone as an extractant. The recommended extraction time is at least 5 days.


  • Thermal Oxidation Resistance of Polyethylene Films Containing Copper and Ascorbic Acid

    by E. V. Vorobyova

    The thermal oxidative resistance of polyethylene films containing ascorbic acid and dispersed copper has been studied by IR spectroscopy. Experiments with the joint incorporation of ascorbic acid and dispersed copper into polyethylene have shown that a small synergistic effect of increasing the thermal oxidative resistance occurs in the resulting composite. A scheme was proposed that explains the reasons for the observed effect of increasing the thermal oxidative resistance of polyethylene. The optimal ratio of copper and ascorbic acid concentrations, leading to an effective increase in the thermal oxidative resistance of the polymer film, has been revealed. The selection of modifiers and their concentrations in the polymer was made in accordance with the main requirements for the composition of oxo-biodegradable additives for polyolefins.


  • An Influence of Nano-Sized Fillers Fe3O4, ZnO on the Thermal Oxidation Resistance of Inhibited Polyethylene

    by E. V. Vorobyova

    The effect of fillers, metal oxide nanoparticles (Fe3O4, ZnO), on the thermal oxidation resistance of polyethylene inhibited by the phenolic antioxidant Irganox 1010 was studied. The distribution of nanoparticles in the polymer matrix was carried out by ultrasound, and the samples were formed by thermal pressing. Thermal oxidation resistance was determined by the duration of the induction oxidation period of film samples. It is shown that the pressure of the press during the formation of the material has a significant effect on the thermal oxidation resistance of the inhibited composite, both filled with nanoparticles of Fe3O4, ZnO, and unfilled. The nature of the effect of the concentration of the nanofiller on the thermal oxidation resistance of the samples depends on the metal oxide used. An increase in the concentration of the filler Fe3O4 leads to a decrease in the thermal oxidation resistance of the polymer; when using ZnO, this dependence is inverse. The oxidation of the prepared nanocomposite film samples formed under high pressure conditions revealed synergistic effects of nanofillers and antioxidants.

  • Open Access

    THE USE OF ONION PEEL EXTRACT TO INHIBIT THE THERMAL OXIDATION OF POLYETHYLENE

    by Elena Valer'Yevna Vorobyova, Elena Leonidovna Prikhodko

    The paper studies experimentally the antioxidant activity of onion peel acetone extracts of three varieties (Albion F1, Kaba, Red Baron) in the inhibition process of polyethylene thermal oxidation. The onion varieties differ in the color of their surface scales (colorless (white onion), yellow-orange (yellow onion), red (red onion)) and in the antioxidant properties of their extracts: red onion> yellow onion >> white onion. The results correspond to the mass of the extracted substances. A different sequence of onion varieties has been obtained in terms of the inhibitory effectiveness of their extracts: yellow onion> red onion >> white onion. The comparison of the extracted onion peel extracts with the industrial antioxidant Irganox 1010 in terms of inhibitory efficiency has been carried out. The paper presents and analyzes the IR spectra of the extracts. An increase in the extraction time from 24 hours to 56 days leads to an increase in the antioxidant properties of the extracts of all three varieties, but an increase in the inhibition efficiency is noted only for Albion F1 onion peel extract. In Red Baron and Kaba varieties, the main part of biologically active substances with antioxidant action is extracted from the peel into acetone during the first days of extraction.


  • Physicochemical Transformations of a Phenol Type Antioxidant during the Multiple Phase Transitions of Stabilized Polyethylene

    by E. V. Vorobyova

    This paper presents the results of Fourier transform infrared (FTIR) spectroscopic studies on the physicochemical and structural transformations of Irganox 1010, a phenol-type antioxidant, in the composition of polyethylene films during the solid ↔ melt phase transitions of the polymer. The intermittent oxidation regime consisted of cycles, each of which incorporated three testing stages, namely, the heating of the sample to a melted state, its isothermal treatment at 150°C, and the reverse transition of the polymer melt into a solid state. The FTIR spectra were recorded in situ, i.e., without removing the sample from the thermo attachment. The polymer was subjected to additional sorption saturation with antioxidant during every cycle of thermal treatment in melt with the simultaneous partial expenditure of its hydroxyl groups. The crystallization of the polymer composite was accompanied by antioxidant desorption: the partially damaged antioxidant was removed from the polymer, and therefore, the quality of the antioxidant that remained sorbed was slightly improved. The detected changes in the structure and physicochemical behavior of antioxidant were produced by the specific features of transformations in the supramolecular structure of the polymer.

  • Open Access

    STABILIZATION OF POLYETHYLENE BY NATURAL FILLERS AND THEIR EXTRACTS

    by Elena Valerievna Vorobyova, Elena Leonidovna Prykhod'Ko

    The possibility of using natural fillers, as well as their extracts as antioxidant additives for polyethylene, was studied. Dried and shredded buckwheat husk sowing (Fagopyrum esculentum), carposome of crab-of-the-woods (Laetiporus sulphureus), carposome of chaga mushroom (Inonotus obliquus), thallus of lichen of oakmoss (Everonia prunastri) were used as natural fillers. Polymer films were made from mixtures of powders of low-pressure polyethylene and natural fillers (the first type of samples) or from a mixture of polyethylene powder and an extract of natural fillers (the second type of samples) by thermal pressing. The degree of oxidation of polyethylene films was controlled by IR spectroscopy. The paper shows that the stabilization of the polyethylene structure proved to be the most effective when used as an additive to the polymer of an extract of the oakmoss (Evernia prunastri). The result is attributed to the presence of secondary lichen metabolites in the extract. The introduction of dry residues of natural fillers proved to be ineffective for polymer stabilization.