Guixin Zhang
Guixin Zhang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Hongcheng Li
State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology, Guangzhou 510006, China
1 shared publication- Hui Tang
State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology, Guangzhou, China
1 shared publication - Jian Gao
State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China
1 shared publication - Jian Gao
Key Laboratory of Optic-electric Sensing and Analytical Chemistry for Life Science, MOE, Shandong Provincial Key Laboratory of Biochemical Engineering, Qingdao Nucleic Acid Rapid Detection Engineering Research Center, College of Marine Science and Biological Engineering, Qingdao University of Science and Technology, Qingdao, 266042, China
1 shared publication Jiedong Li
State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology, Guangzhou 510006, China
1 shared publication- Lanyu Zhang
State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China
1 shared publication
Latest Publications
- 10 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Fast Feedrate Scheduling and PVT-based High Precision Interpolation for Wire Bonding Operation
With the rapid development of electronic packaging technology and the improvement of electronic integration, chip packaging technology with fine pitch, high density and reliability are highly demanded. For electronic packaging technology, the high-speed wire bonding equipment plays an important role for the high efficiency operation and high quality production. For wire bonding equipment, one of the key issues is to ensure a high-precision tracking trajectory for the wire looping process under high-speed motion. Hence, this paper proposes a novel NURBS interpolator that combines optimal feedrate scheduling and PVT interpolation algorithm to improve the wire looping quality. Firstly, under the consideration of various contour accuracy constraints, a feedrate scheduling model is established based on the fitted NURBS path, and a time-optimized feedrate profile is quickly planned by simplifying the model. In order to improve the interpolation accuracy and simplify the internal operation process of the interpolation, the interpolator is developed by adopting the idea of piecewise fitting, adding derivative constraints at the piecewise points, and using the Lagrange multiplier method to obtain a curve that satisfies the fitting precision. The motion trajectory of each axis is converted into a time-synchronized continuous cubic curve, and then these cubic curves are converted into PVT (position-velocity-time) interpolation instructions according to the principle of Hermitian interpolation. The method in this paper belongs to the curve interpolation method. Even at the corner of the path, the calculated interpolation point can accurately fall on the target path. At the same time, the proposed method can achieve higher contour accuracy with fewer interpolation commands.
- 10 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Fast Feedrate Scheduling and PVT-based High Precision Interpolation for Wire Bonding Operation
With the rapid development of electronic packaging technology and the improvement of electronic integration, chip packaging technology with fine pitch, high density and reliability are highly demanded. For electronic packaging technology, the high-speed wire bonding equipment plays an important role for the high efficiency operation and high quality production. For wire bonding equipment, one of the key issues is to ensure a high-precision tracking trajectory for the wire looping process under high-speed motion. Hence, this paper proposes a novel NURBS interpolator that combines optimal feedrate scheduling and PVT interpolation algorithm to improve the wire looping quality. Firstly, under the consideration of various contour accuracy constraints, a feedrate scheduling model is established based on the fitted NURBS path, and a time-optimized feedrate profile is quickly planned by simplifying the model. In order to improve the interpolation accuracy and simplify the internal operation process of the interpolation, the interpolator is developed by adopting the idea of piecewise fitting, adding derivative constraints at the piecewise points, and using the Lagrange multiplier method to obtain a curve that satisfies the fitting precision. The motion trajectory of each axis is converted into a time-synchronized continuous cubic curve, and then these cubic curves are converted into PVT (position-velocity-time) interpolation instructions according to the principle of Hermitian interpolation. The method in this paper belongs to the curve interpolation method. Even at the corner of the path, the calculated interpolation point can accurately fall on the target path. At the same time, the proposed method can achieve higher contour accuracy with fewer interpolation commands.
- 6 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 16 (3) , 1484-1493
A Stable Autoregressive Moving Average Hysteresis Model in Flexure Fast Tool Servo Control
Due to the excellent advantages of high speed and high precision, fast tool servo (FTS) system driven by piezoelectric actuators has great attraction for high-quality machining of microstructural array. However, its complex hysteresis nonlinearity at high speed will greatly affect the accuracy and stability of FTS system. Therefore, a stable autoregressive moving average (SARMA) model is proposed in this paper, which aims to describe the dynamic hysteresis nonlinearity accurately. First, a long autoregressive model residual calculation method is used to determine the order of the model and test the applicability of the model. Then, according to the Lyapunov stability theory, the strict stability analysis of the autoregressive moving average (ARMA) model is carried out in theory. By introducing the relaxation factor to transform the stability condition, the Lagrange multiplier and best square approximation method are applied to enhance the performance of the traditional ARMA model. Aiming at the difficulty of displacement sensor integration in FTS closed-loop controlling system, a hysteresis-compensated direct feedforward control strategy based on the proposed SARMA model is designed. Finally, a series of high-frequency trajectory tracking and comparing experiments has been carried out successfully with the traditional Prandtl-Ishlinskii (PI) and SARMA models to verify the effectiveness and superiority of the method. All results uniformly indicate that the SARMA model is nearly 20 times higher than the traditional PI model in terms of control accuracy and linearity, while the average linearity of FTS's dynamic tracking control is kept within 0.43% (265 nm), the stroke is 280 μm, and the positioning bandwidth is achieved up to 200 Hz.
- 6 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 16 (3) , 1484-1493
A Stable Autoregressive Moving Average Hysteresis Model in Flexure Fast Tool Servo Control
Due to the excellent advantages of high speed and high precision, fast tool servo (FTS) system driven by piezoelectric actuators has great attraction for high-quality machining of microstructural array. However, its complex hysteresis nonlinearity at high speed will greatly affect the accuracy and stability of FTS system. Therefore, a stable autoregressive moving average (SARMA) model is proposed in this paper, which aims to describe the dynamic hysteresis nonlinearity accurately. First, a long autoregressive model residual calculation method is used to determine the order of the model and test the applicability of the model. Then, according to the Lyapunov stability theory, the strict stability analysis of the autoregressive moving average (ARMA) model is carried out in theory. By introducing the relaxation factor to transform the stability condition, the Lagrange multiplier and best square approximation method are applied to enhance the performance of the traditional ARMA model. Aiming at the difficulty of displacement sensor integration in FTS closed-loop controlling system, a hysteresis-compensated direct feedforward control strategy based on the proposed SARMA model is designed. Finally, a series of high-frequency trajectory tracking and comparing experiments has been carried out successfully with the traditional Prandtl-Ishlinskii (PI) and SARMA models to verify the effectiveness and superiority of the method. All results uniformly indicate that the SARMA model is nearly 20 times higher than the traditional PI model in terms of control accuracy and linearity, while the average linearity of FTS's dynamic tracking control is kept within 0.43% (265 nm), the stroke is 280 μm, and the positioning bandwidth is achieved up to 200 Hz.