Sean J. O’sHea
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sean J. O’sHea has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Kin Leong Pey
Singapore University of Technology and Design
10 shared publications - Alok Ranjan
Department of Physics, Chalmers University of Technology, Gothenburg, Sweden
9 shared publications - Nagarajan Raghavan
Nano-Macro Reliability Laboratory (nMRL), Engineering and Product Development Pillar, Singapore University of Technology and Design 1 , 8, Somapah Road, 487372
9 shared publications - Andrew Thye Shen Wee
Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore 117551, Singapore
3 shared publications - Francesco Maria Puglisi
Dipartimento di Ingegneria “Enzo Ferrari,” Universitá di Modena e Reggio Emilia
3 shared publications - Michel Bosman
Department of Materials Science and Engineering, National University of Singapore, Singapore 117575, Singapore
3 shared publications
Latest Publications
- Open Access
- 9 May 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (20) , 17201-17208
Nanoscale Flexing Mechanism of a Metal–Organic Framework Determined by Atomic Force Microscopy
Flexible metal-organic frameworks (MOFs) are a unique set of compounds with applications in diverse areas. The nanoscale mechanism through which they flex is unproven. Herein, we use in situ atomic force microscopy to observe the crystal surface of Ga-MIL-53 MOF, [Ga(OH)(BDC)] (1) (BDC - 1, 4-benzenedicarboxylate) as it undergoes flexing transformations during the guest exchange between N,N-dimethylformamide (DMF) and ethanol (EtOH)-containing 1. 1·0.96DMF undergoes a flexing expansion transformation on guest exchange to form 1·xEtOH through the passage of wavefronts of cooperatively transforming, consecutive rows of unit cells parallel to the (011) plane, resulting in whole (011) layers of unit cells transforming by a layer-by-layer shear mechanism. The reverse process involves 1·xEtOH undergoing a flexing contraction transformation on guest exchange to form 1·0.96DMF through a layer-by-layer shear mechanism involving layers of unit cells parallel to the (011̅) plane transforming in a cooperative manner. This proves a nanoscale mechanism through which a MOF can flex and the coexistence of phases with different degrees of expansion within a crystal, thus providing a missing link in the multilength scale understanding of MOF flexing transformations, which will support future design and application of flexible MOFs and other extended crystalline solids.
- 9 May 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (20) , 17201-17208
Open AccessNanoscale Flexing Mechanism of a Metal–Organic Framework Determined by Atomic Force Microscopy
Flexible metal-organic frameworks (MOFs) are a unique set of compounds with applications in diverse areas. The nanoscale mechanism through which they flex is unproven. Herein, we use in situ atomic force microscopy to observe the crystal surface of Ga-MIL-53 MOF, [Ga(OH)(BDC)] (1) (BDC - 1, 4-benzenedicarboxylate) as it undergoes flexing transformations during the guest exchange between N,N-dimethylformamide (DMF) and ethanol (EtOH)-containing 1. 1·0.96DMF undergoes a flexing expansion transformation on guest exchange to form 1·xEtOH through the passage of wavefronts of cooperatively transforming, consecutive rows of unit cells parallel to the (011) plane, resulting in whole (011) layers of unit cells transforming by a layer-by-layer shear mechanism. The reverse process involves 1·xEtOH undergoing a flexing contraction transformation on guest exchange to form 1·0.96DMF through a layer-by-layer shear mechanism involving layers of unit cells parallel to the (011̅) plane transforming in a cooperative manner. This proves a nanoscale mechanism through which a MOF can flex and the coexistence of phases with different degrees of expansion within a crystal, thus providing a missing link in the multilength scale understanding of MOF flexing transformations, which will support future design and application of flexible MOFs and other extended crystalline solids.
- Open Access
- 9 September 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (11)
Destructive dielectric breakdown of 2D muscovite mica
This study investigates the destructive breakdown (DBD) phenomenon in the van der Waals gate dielectric 2D muscovite mica (4–12 nm thick), focusing on its electrical reliability as a gate dielectric material. Capacitor test structures were electrically stressed, and the resulting impact on the physical structure was analyzed using atomic force microscopy. The volume of material removed in a DBD event is found, and the energy required (Ereq) to vaporize the volume was calculated. It is found that Ereq is proportional to the average electrical energy dissipated in the capacitor during breakdown (BD), indicating a direct correlation between damage caused during DBD and the current flow at BD location. In contrast to other thin film dielectrics, the 2D mica is highly susceptible to DBD even at very low current density (<1 A/cm2) and the abrupt, destructive BD more resembles that of thick film dielectric breakdown. An explanation for these finding is proposed in which intercalated K+ ions agglomerate around defects generated by the electrical stressing such that the defect density increases substantially in the local vicinity of BD locations, which leads to increased current and associated Joule heating after the BD event.
- 9 September 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (11)
Open AccessDestructive dielectric breakdown of 2D muscovite mica
This study investigates the destructive breakdown (DBD) phenomenon in the van der Waals gate dielectric 2D muscovite mica (4–12 nm thick), focusing on its electrical reliability as a gate dielectric material. Capacitor test structures were electrically stressed, and the resulting impact on the physical structure was analyzed using atomic force microscopy. The volume of material removed in a DBD event is found, and the energy required (Ereq) to vaporize the volume was calculated. It is found that Ereq is proportional to the average electrical energy dissipated in the capacitor during breakdown (BD), indicating a direct correlation between damage caused during DBD and the current flow at BD location. In contrast to other thin film dielectrics, the 2D mica is highly susceptible to DBD even at very low current density (<1 A/cm2) and the abrupt, destructive BD more resembles that of thick film dielectric breakdown. An explanation for these finding is proposed in which intercalated K+ ions agglomerate around defects generated by the electrical stressing such that the defect density increases substantially in the local vicinity of BD locations, which leads to increased current and associated Joule heating after the BD event.
- 29 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 24 (2) , 184-193
Guidelines for the Design of Random Telegraph Noise-Based True Random Number Generators
The development of a robust and secure hardware for the Internet of Things (IoT) and edge computing requires improvements in the existing low-power and low-cost hardware security primitives. Among the various available technologies, true random number generators (TRNGs) that leverage random telegraph noise (RTN) from nanoelectronics devices have emerged as effective solutions. However, the temporal instabilities in the RTN signal, such as the DC drift and temporary inhibition, are a few of the key reliability challenges for the TRNG circuits. In this study, we have utilized experimental RTN data collected from the commonly used gate dielectrics, including silicon dioxide (SiO2), hafnium dioxide (HfO2), and 2D crystalline hexagonal boron nitride (h-BN) to identify the crucial reliability challenges for RTN-based TRNG circuits. We have analyzed the impact of RTN instabilities and of circuit parameters on the output randomness and propose reliability aware design guidelines. Finally, we design and simulate an RTN-based TRNG circuit using a 130 nm CMOS technology and evaluate its reliability at the circuit level.
- 29 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 24 (2) , 184-193
Guidelines for the Design of Random Telegraph Noise-Based True Random Number Generators
The development of a robust and secure hardware for the Internet of Things (IoT) and edge computing requires improvements in the existing low-power and low-cost hardware security primitives. Among the various available technologies, true random number generators (TRNGs) that leverage random telegraph noise (RTN) from nanoelectronics devices have emerged as effective solutions. However, the temporal instabilities in the RTN signal, such as the DC drift and temporary inhibition, are a few of the key reliability challenges for the TRNG circuits. In this study, we have utilized experimental RTN data collected from the commonly used gate dielectrics, including silicon dioxide (SiO2), hafnium dioxide (HfO2), and 2D crystalline hexagonal boron nitride (h-BN) to identify the crucial reliability challenges for RTN-based TRNG circuits. We have analyzed the impact of RTN instabilities and of circuit parameters on the output randomness and propose reliability aware design guidelines. Finally, we design and simulate an RTN-based TRNG circuit using a 130 nm CMOS technology and evaluate its reliability at the circuit level.
- 14 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (5) , 809-812
Estimating the Number of Defects in a Single Breakdown Spot of a Gate Dielectric
Conduction Atomic Force Microscopy (CAFM) is used to locally stress a 3.5 nm thick SiO2 film to induce soft dielectric breakdown (SBD). The tip-to-surface adhesion and current-voltage ( I-V ) characteristic at the breakdown location are measured by the CAFM before and after the SBD event. The adhesion force is enhanced after SBD because oxygen ion and charged defects are created at the SBD location during stressing which increases the adhesion via image charge forces. We show that the change in adhesion force, supported by charge transport modeling of the I-V data, can be effectively used to estimate the density and number of defects (~20-30) generated during SBD at a single breakdown spot. The information could be useful to assess the post-breakdown reliability and performance variability of the device.
- 14 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (5) , 809-812
Estimating the Number of Defects in a Single Breakdown Spot of a Gate Dielectric
Conduction Atomic Force Microscopy (CAFM) is used to locally stress a 3.5 nm thick SiO2 film to induce soft dielectric breakdown (SBD). The tip-to-surface adhesion and current-voltage ( I-V ) characteristic at the breakdown location are measured by the CAFM before and after the SBD event. The adhesion force is enhanced after SBD because oxygen ion and charged defects are created at the SBD location during stressing which increases the adhesion via image charge forces. We show that the change in adhesion force, supported by charge transport modeling of the I-V data, can be effectively used to estimate the density and number of defects (~20-30) generated during SBD at a single breakdown spot. The information could be useful to assess the post-breakdown reliability and performance variability of the device.
- Open Access
- 29 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 5 (9) , 5176-5186
Adhesion Microscopy as a Nanoscale Probe for Oxidation and Charge Generation at Metal-Oxide Interfaces
- 29 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 5 (9) , 5176-5186
Open AccessAdhesion Microscopy as a Nanoscale Probe for Oxidation and Charge Generation at Metal-Oxide Interfaces
- Open Access
- 9 February 2023
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 5 (2) , 1262-1276
Molecular Bridges Link Monolayers of Hexagonal Boron Nitride during Dielectric Breakdown
- 9 February 2023
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 5 (2) , 1262-1276
Open AccessMolecular Bridges Link Monolayers of Hexagonal Boron Nitride during Dielectric Breakdown
- 6 September 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (9) , 14370-14378
AFM Manipulation of EGaIn Microdroplets to Generate Controlled, On-Demand Contacts on Molecular Self-Assembled Monolayers
Liquid metal droplets, such as eutectic gallium-indium (EGaIn), are important in many research areas, such as soft electronics, catalysis, and energy storage. Droplet contact on solid surfaces is typically achieved without control over the applied force and without optimizing the wetting properties in different environments (e.g., in air or liquid), resulting in poorly defined contact areas. In this work, we demonstrate the direct manipulation of EGaIn microdroplets using an atomic force microscope (AFM) to generate repeated, on-demand making and breaking of contact on self-assembled monolayers (SAMs) of alkanethiols. The nanoscale positional control and feedback loop in an AFM allow us to control the contact force at the nanonewton level and, consequently, tune the droplet contact areas at the micrometer length scale in both air and ethanol. When submerged in ethanol, the droplets are highly nonwetting, resulting in hysteresis-free contact forces and minimal adhesion; as a result, we are able to create reproducible geometric contact areas of 0.8-4.5 μm2 with the alkanethiolate SAMs in ethanol. In contrast, there is a larger hysteresis in the contact forces and larger adhesion for the same EGaIn droplet in air, which reduced the control over the contact area (4-12 μm2). We demonstrate the usefulness of the technique and of the gained insights in EGaIn contact mechanics by making well-defined molecular tunneling junctions based on alkanethiolate SAMs with small geometric contact areas of between 4 and 12 μm2 in air, 1 to 2 orders of magnitude smaller than previously achieved.
- 6 September 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (9) , 14370-14378
AFM Manipulation of EGaIn Microdroplets to Generate Controlled, On-Demand Contacts on Molecular Self-Assembled Monolayers
Liquid metal droplets, such as eutectic gallium-indium (EGaIn), are important in many research areas, such as soft electronics, catalysis, and energy storage. Droplet contact on solid surfaces is typically achieved without control over the applied force and without optimizing the wetting properties in different environments (e.g., in air or liquid), resulting in poorly defined contact areas. In this work, we demonstrate the direct manipulation of EGaIn microdroplets using an atomic force microscope (AFM) to generate repeated, on-demand making and breaking of contact on self-assembled monolayers (SAMs) of alkanethiols. The nanoscale positional control and feedback loop in an AFM allow us to control the contact force at the nanonewton level and, consequently, tune the droplet contact areas at the micrometer length scale in both air and ethanol. When submerged in ethanol, the droplets are highly nonwetting, resulting in hysteresis-free contact forces and minimal adhesion; as a result, we are able to create reproducible geometric contact areas of 0.8-4.5 μm2 with the alkanethiolate SAMs in ethanol. In contrast, there is a larger hysteresis in the contact forces and larger adhesion for the same EGaIn droplet in air, which reduced the control over the contact area (4-12 μm2). We demonstrate the usefulness of the technique and of the gained insights in EGaIn contact mechanics by making well-defined molecular tunneling junctions based on alkanethiolate SAMs with small geometric contact areas of between 4 and 12 μm2 in air, 1 to 2 orders of magnitude smaller than previously achieved.
- Open Access
- 18 August 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-11
Dielectric breakdown of 2D muscovite mica
Localized electrical breakdown (BD) measurements are performed on 2D muscovite mica flakes of ~ 2 to 15 nm thickness using Conduction Atomic Force Microscopy (CAFM). To obtain robust BD data by CAFM, the probed locations are spaced sufficiently far apart (> 1 µm) to avoid mutual interference and the maximum current is set to a low value (< 1 nA) to ensure severe damage does not occur to the sample. The analyses reveals that 2D muscovite mica has high electrical breakdown strength (12 MV/cm or more) and low leakage current, comparable to 2D hexagonal boron nitride (h-BN) of similar thickness. However, a significant difference compared to h-BN is the very low current necessary to avoid catastrophic damage during the BD event, even for very thin (2–3 nm) flakes. Further, for mica the BD transient always appear to be very abrupt, and no progressive BD process was definitively observed. These marked differences between mica and h-BN are attributed to the poor thermal conductivity of mica.
- 18 August 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-11
Open AccessDielectric breakdown of 2D muscovite mica
Localized electrical breakdown (BD) measurements are performed on 2D muscovite mica flakes of ~ 2 to 15 nm thickness using Conduction Atomic Force Microscopy (CAFM). To obtain robust BD data by CAFM, the probed locations are spaced sufficiently far apart (> 1 µm) to avoid mutual interference and the maximum current is set to a low value (< 1 nA) to ensure severe damage does not occur to the sample. The analyses reveals that 2D muscovite mica has high electrical breakdown strength (12 MV/cm or more) and low leakage current, comparable to 2D hexagonal boron nitride (h-BN) of similar thickness. However, a significant difference compared to h-BN is the very low current necessary to avoid catastrophic damage during the BD event, even for very thin (2–3 nm) flakes. Further, for mica the BD transient always appear to be very abrupt, and no progressive BD process was definitively observed. These marked differences between mica and h-BN are attributed to the poor thermal conductivity of mica.
- Open Access
- 19 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 4 (8) , 3909-3921
Spatially Controlled Generation and Probing of Random Telegraph Noise in Metal Nanocrystal Embedded HfO2 Using Defect Nanospectroscopy
- 19 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 4 (8) , 3909-3921
Open AccessSpatially Controlled Generation and Probing of Random Telegraph Noise in Metal Nanocrystal Embedded HfO2 Using Defect Nanospectroscopy
- 11 August 2021
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 3 (8) , 3547-3554
Dielectric Breakdown in Single-Crystal Hexagonal Boron Nitride
- 11 August 2021
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 3 (8) , 3547-3554
Dielectric Breakdown in Single-Crystal Hexagonal Boron Nitride