Zhewang Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhewang Ma has a total of 119 co-authors. Here are the top co-authors by number of shared publications:
- Xiaolong Wang
Jilin University
10 shared publications - Masataka Ohira
Graduate School of Science and Engineering, Saitama University, Saitama, Japan
9 shared publications - Haiwen Liu
State Key Laboratory of Radio Frequency Heterogeneous Integration, Shenzhen University, Shenzhen, China
8 shared publications - Baoping Ren
School of Information and Software Engineering, East China Jiaotong University, Nanchang, China
7 shared publications - Chun-Ping Chen
Department of Electrical, Electronics and Information Engineering, Kanagawa University
7 shared publications - Fan Liu
School of Physics and Electronic Sciences, Changsha University of Science and Technology, Changsha, China
7 shared publications
Latest Publications
- 9 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. PP (00189480) , 1-11
HTS Ultra-Narrow Triband Bandpass Filter With Fully Controllable Passbands Using Novel Miniaturized Tri-Mode Resonators
In this article, a sixth-order ultra-narrow tri-band bandpass filter (BPF) is developed for the first time by using novel microstrip tri-mode resonators. High-order ultra-narrow BPFs usually occupy a large area, but the presented BPF is successfully miniaturized because, first, the invented tri-mode double ring loaded hairpin resonator (DRLHR) is very compact due to its closely folded line structure, and second, very small coupling coefficients crucial for ultra-narrow BPFs are remarkably achieved for closely spaced DRLHRs by virtue of three unique techniques to weaken simultaneously couplings of all three operating modes of the tri-mode resonators. Design of high-order ultra-narrow multiband BPFs tend to incur big discrepancies with the targets, but the design of this article accomplishes high precision because the center frequencies, coupling coefficients, and external Q-factors of the three passbands are all independently controlled through easy and skillful tuning of different components invented for the filter. The designed BPF operating at 1.420/1.612/1.720 GHz is finally fabricated by using high-temperature superconducting (HTS) films and exhibits measurement responses agreeing well with the specifications. The measured three passbands show equal-ripple fractional bandwidths (FBWs) of 0.31%/0.26%/0.10%, minimum insertion losses (ILs) of 0.36/0.35/0.63 dB, and an overall size of $0.23\lambda _{g} \times 0.28\lambda _{g}$ .
- 9 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. PP (00189480) , 1-11
HTS Ultra-Narrow Triband Bandpass Filter With Fully Controllable Passbands Using Novel Miniaturized Tri-Mode Resonators
In this article, a sixth-order ultra-narrow tri-band bandpass filter (BPF) is developed for the first time by using novel microstrip tri-mode resonators. High-order ultra-narrow BPFs usually occupy a large area, but the presented BPF is successfully miniaturized because, first, the invented tri-mode double ring loaded hairpin resonator (DRLHR) is very compact due to its closely folded line structure, and second, very small coupling coefficients crucial for ultra-narrow BPFs are remarkably achieved for closely spaced DRLHRs by virtue of three unique techniques to weaken simultaneously couplings of all three operating modes of the tri-mode resonators. Design of high-order ultra-narrow multiband BPFs tend to incur big discrepancies with the targets, but the design of this article accomplishes high precision because the center frequencies, coupling coefficients, and external Q-factors of the three passbands are all independently controlled through easy and skillful tuning of different components invented for the filter. The designed BPF operating at 1.420/1.612/1.720 GHz is finally fabricated by using high-temperature superconducting (HTS) films and exhibits measurement responses agreeing well with the specifications. The measured three passbands show equal-ripple fractional bandwidths (FBWs) of 0.31%/0.26%/0.10%, minimum insertion losses (ILs) of 0.36/0.35/0.63 dB, and an overall size of $0.23\lambda _{g} \times 0.28\lambda _{g}$ .
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. PP (2771957X) , 1-4
Monoblock Compact Dielectric Waveguide Diplexers Using Novel Triple-Mode Resonators With Controllable Transmission Zeros and Bandwidths
In this letter, monoblock compact dielectric waveguide diplexers with controllable transmission zeros (TZs) are designed using novel triple-mode dielectric waveguide resonators (DWRs). Resonance behaviors and coupling mechanisms of the triple-mode DWR are investigated. Both positive and negative couplings can be realized by adjusting the position of the coupling blind hole, thus achieving precise control of TZs. Two diplexers with fully controllable bandwidth and flexible TZs are accurately designed. To demonstrate the proposed concept, a 3-pole diplexer operating at 3.38 and 3.58 GHz, each with a 100-MHz bandwidth, is fabricated and measured. Good agreement between simulated and measured responses can be observed. The final diplexer exhibits an insertion loss (IL) better than 0.57 dB and has a compact overall size of $2.63\times 1.00\times 0.37~\lambda ^{3}$ g.
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. PP (2771957X) , 1-4
Monoblock Compact Dielectric Waveguide Diplexers Using Novel Triple-Mode Resonators With Controllable Transmission Zeros and Bandwidths
In this letter, monoblock compact dielectric waveguide diplexers with controllable transmission zeros (TZs) are designed using novel triple-mode dielectric waveguide resonators (DWRs). Resonance behaviors and coupling mechanisms of the triple-mode DWR are investigated. Both positive and negative couplings can be realized by adjusting the position of the coupling blind hole, thus achieving precise control of TZs. Two diplexers with fully controllable bandwidth and flexible TZs are accurately designed. To demonstrate the proposed concept, a 3-pole diplexer operating at 3.38 and 3.58 GHz, each with a 100-MHz bandwidth, is fabricated and measured. Good agreement between simulated and measured responses can be observed. The final diplexer exhibits an insertion loss (IL) better than 0.57 dB and has a compact overall size of $2.63\times 1.00\times 0.37~\lambda ^{3}$ g.
- 13 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (3) , 355-358
Miniaturized Ultrawide Stopband Bandpass Filter Based on Hybrid Spoof Surface Plasmon Polaritons and Quarter-Mode Substrate Integrated Waveguide
In this letter, a miniaturized bandpass filter (BPF) with an ultrawide stopband by integrating spoof surface plasmon polaritons (SSPPs) and a circular quarter-mode substrate integrated waveguide (QMSIW) is proposed. A circular QMSIW was adopted as the main resonant cavity, which not only achieves 75% size reduction but also has fewer harmonic components, which are conducive to the realization of wide stopband. Furthermore, to enhance the roll-off rate of the lower stopband and stopband rejection, two stepped-impedance-resonators (SIRs) are incorporated into the I/O feedlines. For verification, a miniaturized BPF is designed, fabricated, and measured, which achieves full stopband suppression with a rejection level of −20 dB over the entire frequency range, and the measured 3-dB fractional bandwidth of 81.1% ranging from 5.5 to 13.0 GHz. The overall size is only $0.80\lambda _{\text {g}} \times 0.45 \lambda _{\text {g}}$ .
- 13 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (3) , 355-358
Miniaturized Ultrawide Stopband Bandpass Filter Based on Hybrid Spoof Surface Plasmon Polaritons and Quarter-Mode Substrate Integrated Waveguide
In this letter, a miniaturized bandpass filter (BPF) with an ultrawide stopband by integrating spoof surface plasmon polaritons (SSPPs) and a circular quarter-mode substrate integrated waveguide (QMSIW) is proposed. A circular QMSIW was adopted as the main resonant cavity, which not only achieves 75% size reduction but also has fewer harmonic components, which are conducive to the realization of wide stopband. Furthermore, to enhance the roll-off rate of the lower stopband and stopband rejection, two stepped-impedance-resonators (SIRs) are incorporated into the I/O feedlines. For verification, a miniaturized BPF is designed, fabricated, and measured, which achieves full stopband suppression with a rejection level of −20 dB over the entire frequency range, and the measured 3-dB fractional bandwidth of 81.1% ranging from 5.5 to 13.0 GHz. The overall size is only $0.80\lambda _{\text {g}} \times 0.45 \lambda _{\text {g}}$ .
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (12) , 1889-1892
Monoblock Quintet-Section Dielectric Triple-Mode Resonator BPFs With Flexible Transmission Zeros
In this letter, novel monoblock dielectric waveguide filters (DWFs) with three flexibly allocable transmission zeros (TZs) are accurately designed by cascading a novel triple-mode dielectric waveguide resonator (DWR) and two TM110 DWRs based on a quintet-section scheme. Resonance behaviors of the triple-mode DWR are investigated, and individual controls of all the interresonance couplings are achieved. All three TZs can be precisely designed and realized by adjusting the proposed coupling structures. Two example DWFs with three TZs either above or below the passband are demonstrated, and one of which is further fabricated. The measured responses of the DWF show excellent agreement with the simulations and manifest the attractive features of the proposed DWF, such as compactness, low loss, and sharp frequency selectivity.
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (12) , 1889-1892
Monoblock Quintet-Section Dielectric Triple-Mode Resonator BPFs With Flexible Transmission Zeros
In this letter, novel monoblock dielectric waveguide filters (DWFs) with three flexibly allocable transmission zeros (TZs) are accurately designed by cascading a novel triple-mode dielectric waveguide resonator (DWR) and two TM110 DWRs based on a quintet-section scheme. Resonance behaviors of the triple-mode DWR are investigated, and individual controls of all the interresonance couplings are achieved. All three TZs can be precisely designed and realized by adjusting the proposed coupling structures. Two example DWFs with three TZs either above or below the passband are demonstrated, and one of which is further fabricated. The measured responses of the DWF show excellent agreement with the simulations and manifest the attractive features of the proposed DWF, such as compactness, low loss, and sharp frequency selectivity.
- 24 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (12) , 2699-2708
Design of Balanced Diplexer Based on Hybrid Microstrip and Slotline Transition Structure With Intrinsic CM Suppression and Wide Stopband
This paper proposed a balanced diplexer featuring intrinsic common-mode (CM) suppression and a wide stopband. The proposed design incorporates three balanced hybrid microstrip and slotline transition structures (HMSTS) and two sets of channel bandpass filters (BPFs). Each HMSTS combines a U-shaped microstrip feedline with a stepped-impedance slotline, enabling inherent full-band CM suppression and simplifying the differential mode (DM) design process. In the channel filter design, E-shaped stub-loaded resonators (ESLRs) and single-mode C-shaped resonators (SCRs) are employed as non-resonant nodes, acting as virtual sources and loads for the BPFs. Each channel filter is configured as a fourth-order filter using folded U-shaped resonators (FURs), resulting in a compact layout for the diplexer. To achieve a wide stopband, the first spurious harmonic of the ESLR is designed to be well-separated from the harmonic of the FURs, effectively disrupting unwanted resonant paths. To validate the proposed design, a prototype balanced diplexer operating at 3.1 GHz and 3.8 GHz was designed, fabricated, and measured. The results demonstrate favorable DM and CM performance, with excellent agreement observed between simulated and measured.
- 24 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (12) , 2699-2708
Design of Balanced Diplexer Based on Hybrid Microstrip and Slotline Transition Structure With Intrinsic CM Suppression and Wide Stopband
This paper proposed a balanced diplexer featuring intrinsic common-mode (CM) suppression and a wide stopband. The proposed design incorporates three balanced hybrid microstrip and slotline transition structures (HMSTS) and two sets of channel bandpass filters (BPFs). Each HMSTS combines a U-shaped microstrip feedline with a stepped-impedance slotline, enabling inherent full-band CM suppression and simplifying the differential mode (DM) design process. In the channel filter design, E-shaped stub-loaded resonators (ESLRs) and single-mode C-shaped resonators (SCRs) are employed as non-resonant nodes, acting as virtual sources and loads for the BPFs. Each channel filter is configured as a fourth-order filter using folded U-shaped resonators (FURs), resulting in a compact layout for the diplexer. To achieve a wide stopband, the first spurious harmonic of the ESLR is designed to be well-separated from the harmonic of the FURs, effectively disrupting unwanted resonant paths. To validate the proposed design, a prototype balanced diplexer operating at 3.1 GHz and 3.8 GHz was designed, fabricated, and measured. The results demonstrate favorable DM and CM performance, with excellent agreement observed between simulated and measured.
- 27 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 670-673
Miniaturized Dual-Band Bandpass Filter Using Triple-Mode Dielectric Waveguide Resonators With Adjustable Capacity in Transmission Zeros
In this letter, a miniaturized dual-band bandpass filter (BPF) using triple-mode dielectric waveguide resonators (DWRs) with two adjustable transmission zeros (TZs) is presented. In the triple-mode DWR, three TM modes are divided into two groups and utilized to generate a dual-band response. Specifically, the fundamental TM110 modes are utilized to construct the lower passband, which contains two poles, while the degenerate TM120 and TM210 modes form a cascaded quadruplet (CQ) unit that generates the upper passband with four poles. Both positive and negative couplings within the upper passband are readily achieved by simply adjusting the positions of two coupling holes. A TZ pair near the upper passband is introduced with significant flexibility and can be arbitrarily positioned. Finally, a dual-band BPF with a symmetric TZ pair using the DWR is designed and fabricated. Good agreement between the simulated and measured responses validates the design idea.
- 27 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 670-673
Miniaturized Dual-Band Bandpass Filter Using Triple-Mode Dielectric Waveguide Resonators With Adjustable Capacity in Transmission Zeros
In this letter, a miniaturized dual-band bandpass filter (BPF) using triple-mode dielectric waveguide resonators (DWRs) with two adjustable transmission zeros (TZs) is presented. In the triple-mode DWR, three TM modes are divided into two groups and utilized to generate a dual-band response. Specifically, the fundamental TM110 modes are utilized to construct the lower passband, which contains two poles, while the degenerate TM120 and TM210 modes form a cascaded quadruplet (CQ) unit that generates the upper passband with four poles. Both positive and negative couplings within the upper passband are readily achieved by simply adjusting the positions of two coupling holes. A TZ pair near the upper passband is introduced with significant flexibility and can be arbitrarily positioned. Finally, a dual-band BPF with a symmetric TZ pair using the DWR is designed and fabricated. Good agreement between the simulated and measured responses validates the design idea.
- Open Access
- 1 November 2024
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Electronics
- Vol. E107.C (11) , 472-478
Precise Design of an 11-Pole TM010 Mode Dielectric Resonator BPF with Novel Capacitive Coupling Structures
In this paper, a precise design method of high-order bandpass filters (BPFs) with complicated coupling topologies is proposed, and is demonstrated through the design of an 11-pole BPF using TM010 mode dielectric resonators (DRs). A novel Z-shaped coupling structure is proposed which avoids the mixed use of TM010 and TM01δ modes and enables the tuning and assembling of the filter much easier. The coupling topology of the BPF includes three cascade triplets (CTs) of DRs, and both the capacitive and inductive couplings in the CTs are designed independently tunable, which produce consequently three controllable transmission zeros on both sides of the passband of filter. A procedure of mapping the coupling matrix of BPF to its physical dimensions is developed, and an iterative optimization of these physical dimensions is implemented to achieve best performance. The design of the 11-pole BPF is shown highly precise by the excellent agreement between the electromagnetic simulated response of the filter and the desired target specifications.
- 1 November 2024
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Electronics
- Vol. E107.C (11) , 472-478
Open AccessPrecise Design of an 11-Pole TM010 Mode Dielectric Resonator BPF with Novel Capacitive Coupling Structures
In this paper, a precise design method of high-order bandpass filters (BPFs) with complicated coupling topologies is proposed, and is demonstrated through the design of an 11-pole BPF using TM010 mode dielectric resonators (DRs). A novel Z-shaped coupling structure is proposed which avoids the mixed use of TM010 and TM01δ modes and enables the tuning and assembling of the filter much easier. The coupling topology of the BPF includes three cascade triplets (CTs) of DRs, and both the capacitive and inductive couplings in the CTs are designed independently tunable, which produce consequently three controllable transmission zeros on both sides of the passband of filter. A procedure of mapping the coupling matrix of BPF to its physical dimensions is developed, and an iterative optimization of these physical dimensions is implemented to achieve best performance. The design of the 11-pole BPF is shown highly precise by the excellent agreement between the electromagnetic simulated response of the filter and the desired target specifications.