Fan Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Fan Liu has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Zhewang Ma
Saitama University
7 shared publications - Pin Wen
Nanchang University
4 shared publications - Kai-Da Xu
School of Information and Communications Engineering, Xi’an Jiaotong University, Xi’an 710049, China
3 shared publications - Eng-Hock Lim
Universiti Tunku Abdul Rahman
2 shared publications Jie Li
Changsha University of Science and Technology
2 shared publicationsShenggen Deng
Changsha University of Science and Technology
2 shared publications
Latest Publications
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (6) , 5395-5408
An Optimization Method for Cavity Bandpass Filters Using a Transformer-Based Deep Neural Network Surrogate Model
To overcome the inefficiency of conventional design methods that rely extensively on full-wave electromagnetic (EM) simulations and engineers’ experience, a new optimization method using a transformer-based deep neural network (DNN) surrogate model is proposed for the design of cavity bandpass filters (BPFs). By utilizing the attention mechanism of the transformer, the proposed DNN can efficiently establish the mapping between structural parameters and S-parameters, which can replace the time-consuming EM simulation process. To improve sampling efficiency, Latin hypercube sampling (LHS) is employed to ensure comprehensive coverage of the sample space with a reduced number of samples. The DNN surrogate model is then employed in the particle swarm optimization (PSO) algorithm to automatically search for optimal structural parameters. Three design examples, i.e., two microwave coaxial cavity BPFs and a millimeter-wave rectangular waveguide (RWG) BPF, are provided to demonstrate the effectiveness of the proposed method. The optimized results agree well with the desired design specifications, confirming that the proposed optimization method offers a reliable and time-saving solution for the design of complex cavity BPFs.
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (6) , 5395-5408
An Optimization Method for Cavity Bandpass Filters Using a Transformer-Based Deep Neural Network Surrogate Model
To overcome the inefficiency of conventional design methods that rely extensively on full-wave electromagnetic (EM) simulations and engineers’ experience, a new optimization method using a transformer-based deep neural network (DNN) surrogate model is proposed for the design of cavity bandpass filters (BPFs). By utilizing the attention mechanism of the transformer, the proposed DNN can efficiently establish the mapping between structural parameters and S-parameters, which can replace the time-consuming EM simulation process. To improve sampling efficiency, Latin hypercube sampling (LHS) is employed to ensure comprehensive coverage of the sample space with a reduced number of samples. The DNN surrogate model is then employed in the particle swarm optimization (PSO) algorithm to automatically search for optimal structural parameters. Three design examples, i.e., two microwave coaxial cavity BPFs and a millimeter-wave rectangular waveguide (RWG) BPF, are provided to demonstrate the effectiveness of the proposed method. The optimized results agree well with the desired design specifications, confirming that the proposed optimization method offers a reliable and time-saving solution for the design of complex cavity BPFs.
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. PP (2771957X) , 1-4
Monoblock Compact Dielectric Waveguide Diplexers Using Novel Triple-Mode Resonators With Controllable Transmission Zeros and Bandwidths
In this letter, monoblock compact dielectric waveguide diplexers with controllable transmission zeros (TZs) are designed using novel triple-mode dielectric waveguide resonators (DWRs). Resonance behaviors and coupling mechanisms of the triple-mode DWR are investigated. Both positive and negative couplings can be realized by adjusting the position of the coupling blind hole, thus achieving precise control of TZs. Two diplexers with fully controllable bandwidth and flexible TZs are accurately designed. To demonstrate the proposed concept, a 3-pole diplexer operating at 3.38 and 3.58 GHz, each with a 100-MHz bandwidth, is fabricated and measured. Good agreement between simulated and measured responses can be observed. The final diplexer exhibits an insertion loss (IL) better than 0.57 dB and has a compact overall size of $2.63\times 1.00\times 0.37~\lambda ^{3}$ g.
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. PP (2771957X) , 1-4
Monoblock Compact Dielectric Waveguide Diplexers Using Novel Triple-Mode Resonators With Controllable Transmission Zeros and Bandwidths
In this letter, monoblock compact dielectric waveguide diplexers with controllable transmission zeros (TZs) are designed using novel triple-mode dielectric waveguide resonators (DWRs). Resonance behaviors and coupling mechanisms of the triple-mode DWR are investigated. Both positive and negative couplings can be realized by adjusting the position of the coupling blind hole, thus achieving precise control of TZs. Two diplexers with fully controllable bandwidth and flexible TZs are accurately designed. To demonstrate the proposed concept, a 3-pole diplexer operating at 3.38 and 3.58 GHz, each with a 100-MHz bandwidth, is fabricated and measured. Good agreement between simulated and measured responses can be observed. The final diplexer exhibits an insertion loss (IL) better than 0.57 dB and has a compact overall size of $2.63\times 1.00\times 0.37~\lambda ^{3}$ g.
- 13 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (3) , 355-358
Miniaturized Ultrawide Stopband Bandpass Filter Based on Hybrid Spoof Surface Plasmon Polaritons and Quarter-Mode Substrate Integrated Waveguide
In this letter, a miniaturized bandpass filter (BPF) with an ultrawide stopband by integrating spoof surface plasmon polaritons (SSPPs) and a circular quarter-mode substrate integrated waveguide (QMSIW) is proposed. A circular QMSIW was adopted as the main resonant cavity, which not only achieves 75% size reduction but also has fewer harmonic components, which are conducive to the realization of wide stopband. Furthermore, to enhance the roll-off rate of the lower stopband and stopband rejection, two stepped-impedance-resonators (SIRs) are incorporated into the I/O feedlines. For verification, a miniaturized BPF is designed, fabricated, and measured, which achieves full stopband suppression with a rejection level of −20 dB over the entire frequency range, and the measured 3-dB fractional bandwidth of 81.1% ranging from 5.5 to 13.0 GHz. The overall size is only $0.80\lambda _{\text {g}} \times 0.45 \lambda _{\text {g}}$ .
- 13 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (3) , 355-358
Miniaturized Ultrawide Stopband Bandpass Filter Based on Hybrid Spoof Surface Plasmon Polaritons and Quarter-Mode Substrate Integrated Waveguide
In this letter, a miniaturized bandpass filter (BPF) with an ultrawide stopband by integrating spoof surface plasmon polaritons (SSPPs) and a circular quarter-mode substrate integrated waveguide (QMSIW) is proposed. A circular QMSIW was adopted as the main resonant cavity, which not only achieves 75% size reduction but also has fewer harmonic components, which are conducive to the realization of wide stopband. Furthermore, to enhance the roll-off rate of the lower stopband and stopband rejection, two stepped-impedance-resonators (SIRs) are incorporated into the I/O feedlines. For verification, a miniaturized BPF is designed, fabricated, and measured, which achieves full stopband suppression with a rejection level of −20 dB over the entire frequency range, and the measured 3-dB fractional bandwidth of 81.1% ranging from 5.5 to 13.0 GHz. The overall size is only $0.80\lambda _{\text {g}} \times 0.45 \lambda _{\text {g}}$ .
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (12) , 1889-1892
Monoblock Quintet-Section Dielectric Triple-Mode Resonator BPFs With Flexible Transmission Zeros
In this letter, novel monoblock dielectric waveguide filters (DWFs) with three flexibly allocable transmission zeros (TZs) are accurately designed by cascading a novel triple-mode dielectric waveguide resonator (DWR) and two TM110 DWRs based on a quintet-section scheme. Resonance behaviors of the triple-mode DWR are investigated, and individual controls of all the interresonance couplings are achieved. All three TZs can be precisely designed and realized by adjusting the proposed coupling structures. Two example DWFs with three TZs either above or below the passband are demonstrated, and one of which is further fabricated. The measured responses of the DWF show excellent agreement with the simulations and manifest the attractive features of the proposed DWF, such as compactness, low loss, and sharp frequency selectivity.
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (12) , 1889-1892
Monoblock Quintet-Section Dielectric Triple-Mode Resonator BPFs With Flexible Transmission Zeros
In this letter, novel monoblock dielectric waveguide filters (DWFs) with three flexibly allocable transmission zeros (TZs) are accurately designed by cascading a novel triple-mode dielectric waveguide resonator (DWR) and two TM110 DWRs based on a quintet-section scheme. Resonance behaviors of the triple-mode DWR are investigated, and individual controls of all the interresonance couplings are achieved. All three TZs can be precisely designed and realized by adjusting the proposed coupling structures. Two example DWFs with three TZs either above or below the passband are demonstrated, and one of which is further fabricated. The measured responses of the DWF show excellent agreement with the simulations and manifest the attractive features of the proposed DWF, such as compactness, low loss, and sharp frequency selectivity.
- 24 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (12) , 2699-2708
Design of Balanced Diplexer Based on Hybrid Microstrip and Slotline Transition Structure With Intrinsic CM Suppression and Wide Stopband
This paper proposed a balanced diplexer featuring intrinsic common-mode (CM) suppression and a wide stopband. The proposed design incorporates three balanced hybrid microstrip and slotline transition structures (HMSTS) and two sets of channel bandpass filters (BPFs). Each HMSTS combines a U-shaped microstrip feedline with a stepped-impedance slotline, enabling inherent full-band CM suppression and simplifying the differential mode (DM) design process. In the channel filter design, E-shaped stub-loaded resonators (ESLRs) and single-mode C-shaped resonators (SCRs) are employed as non-resonant nodes, acting as virtual sources and loads for the BPFs. Each channel filter is configured as a fourth-order filter using folded U-shaped resonators (FURs), resulting in a compact layout for the diplexer. To achieve a wide stopband, the first spurious harmonic of the ESLR is designed to be well-separated from the harmonic of the FURs, effectively disrupting unwanted resonant paths. To validate the proposed design, a prototype balanced diplexer operating at 3.1 GHz and 3.8 GHz was designed, fabricated, and measured. The results demonstrate favorable DM and CM performance, with excellent agreement observed between simulated and measured.
- 24 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (12) , 2699-2708
Design of Balanced Diplexer Based on Hybrid Microstrip and Slotline Transition Structure With Intrinsic CM Suppression and Wide Stopband
This paper proposed a balanced diplexer featuring intrinsic common-mode (CM) suppression and a wide stopband. The proposed design incorporates three balanced hybrid microstrip and slotline transition structures (HMSTS) and two sets of channel bandpass filters (BPFs). Each HMSTS combines a U-shaped microstrip feedline with a stepped-impedance slotline, enabling inherent full-band CM suppression and simplifying the differential mode (DM) design process. In the channel filter design, E-shaped stub-loaded resonators (ESLRs) and single-mode C-shaped resonators (SCRs) are employed as non-resonant nodes, acting as virtual sources and loads for the BPFs. Each channel filter is configured as a fourth-order filter using folded U-shaped resonators (FURs), resulting in a compact layout for the diplexer. To achieve a wide stopband, the first spurious harmonic of the ESLR is designed to be well-separated from the harmonic of the FURs, effectively disrupting unwanted resonant paths. To validate the proposed design, a prototype balanced diplexer operating at 3.1 GHz and 3.8 GHz was designed, fabricated, and measured. The results demonstrate favorable DM and CM performance, with excellent agreement observed between simulated and measured.
- 27 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 670-673
Miniaturized Dual-Band Bandpass Filter Using Triple-Mode Dielectric Waveguide Resonators With Adjustable Capacity in Transmission Zeros
In this letter, a miniaturized dual-band bandpass filter (BPF) using triple-mode dielectric waveguide resonators (DWRs) with two adjustable transmission zeros (TZs) is presented. In the triple-mode DWR, three TM modes are divided into two groups and utilized to generate a dual-band response. Specifically, the fundamental TM110 modes are utilized to construct the lower passband, which contains two poles, while the degenerate TM120 and TM210 modes form a cascaded quadruplet (CQ) unit that generates the upper passband with four poles. Both positive and negative couplings within the upper passband are readily achieved by simply adjusting the positions of two coupling holes. A TZ pair near the upper passband is introduced with significant flexibility and can be arbitrarily positioned. Finally, a dual-band BPF with a symmetric TZ pair using the DWR is designed and fabricated. Good agreement between the simulated and measured responses validates the design idea.
- 27 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (6) , 670-673
Miniaturized Dual-Band Bandpass Filter Using Triple-Mode Dielectric Waveguide Resonators With Adjustable Capacity in Transmission Zeros
In this letter, a miniaturized dual-band bandpass filter (BPF) using triple-mode dielectric waveguide resonators (DWRs) with two adjustable transmission zeros (TZs) is presented. In the triple-mode DWR, three TM modes are divided into two groups and utilized to generate a dual-band response. Specifically, the fundamental TM110 modes are utilized to construct the lower passband, which contains two poles, while the degenerate TM120 and TM210 modes form a cascaded quadruplet (CQ) unit that generates the upper passband with four poles. Both positive and negative couplings within the upper passband are readily achieved by simply adjusting the positions of two coupling holes. A TZ pair near the upper passband is introduced with significant flexibility and can be arbitrarily positioned. Finally, a dual-band BPF with a symmetric TZ pair using the DWR is designed and fabricated. Good agreement between the simulated and measured responses validates the design idea.
- 8 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (11) , 4947-4956
Novel Combined Coaxial and Dual-Mode Dielectric Resonator BPFs With Symmetric and Asymmetric Responses Using Virtual Negative Couplings
In this article, bandpass filters (BPFs) with symmetrical or asymmetrical responses are precisely designed by using novel combined coaxial TEM-mode and HE $_{11}$ dual-mode dielectric resonators (DRs). Novel tuning structures of the coupling coefficients among the TEM-mode and dual HE $_{11}$ modes are proposed with full descriptions of the coupling mechanisms. Both positive and virtual negative couplings in the triplet coupling topologies are achieved with flexible choices of the tuning parameters, and transmission zeros (TZs) can be precisely designed at prescribed frequencies. Individual controls of all the design parameters of the BPFs, including all resonant frequencies and all interresonance coupling coefficients, are accomplished, and the designed responses of three BPF examples agree well with the theoretically synthesized ones. Finally, a six-pole BPF with two TZs on both sides of its passband is designed and fabricated. The measured response of the BPF agrees well with the simulated one and shows a center frequency ( $f_{0})$ of 2 GHz and a bandwidth of 40 MHz. The insertion loss at $f_{0}$ is 0.95 dB. The stopband with rejections larger than 48.2 dB is extended up to 5.6 GHz (about 2.8 $f_{0})$ .
- 8 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (11) , 4947-4956
Novel Combined Coaxial and Dual-Mode Dielectric Resonator BPFs With Symmetric and Asymmetric Responses Using Virtual Negative Couplings
In this article, bandpass filters (BPFs) with symmetrical or asymmetrical responses are precisely designed by using novel combined coaxial TEM-mode and HE $_{11}$ dual-mode dielectric resonators (DRs). Novel tuning structures of the coupling coefficients among the TEM-mode and dual HE $_{11}$ modes are proposed with full descriptions of the coupling mechanisms. Both positive and virtual negative couplings in the triplet coupling topologies are achieved with flexible choices of the tuning parameters, and transmission zeros (TZs) can be precisely designed at prescribed frequencies. Individual controls of all the design parameters of the BPFs, including all resonant frequencies and all interresonance coupling coefficients, are accomplished, and the designed responses of three BPF examples agree well with the theoretically synthesized ones. Finally, a six-pole BPF with two TZs on both sides of its passband is designed and fabricated. The measured response of the BPF agrees well with the simulated one and shows a center frequency ( $f_{0})$ of 2 GHz and a bandwidth of 40 MHz. The insertion loss at $f_{0}$ is 0.95 dB. The stopband with rejections larger than 48.2 dB is extended up to 5.6 GHz (about 2.8 $f_{0})$ .